I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo SCDblnk_byangelsdesignz.gif
 photo PPPBlinkie2_zps90ae120a.gif
 photo KKfan_byevolangel_zpsyiycjybi.gif

Blog Archive

Facebook

Sunday, October 28, 2012

TOXIC HALLOWEEN




Supplies needed:

I am using the stunning art from Shawli for this tutorial, which you can find here

Scrapkit: I am using an amazing kit from Eclipse Creations called "Toxic Hallowen" which you can get by going here

Halloween Collab from Dee & Kandi which can be found here

DMask0311 here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 28, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layer

Select all, float, and defloat

Add new raster layer and flood-fill with color or gradient of choice

Apply Eyecandy - Glass at default settings ( I only applied it to the Witches wording)

Delete/Hide original word-art layer

Select Word art back

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Select Witch Silhouette and delete

Select Purple Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 65%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Green Square layer

Select all, float, defloat

Paste paper EC-Th_P9

Select invert, delete, select none

Delete/Hide original square layer

Select Orange Rectangle layer and delete

Select EC_TH_Frame4

Paste in the center of the template

Select your magic wand and click in the center of the frame

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice

Select none

Move layer below frame

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Select EC_TH_SpiderWeb2 element - resize by 70%

Paste and position under frame layer where desired

Select EC_TH_Moon2 element - resize by 40%

Paste above frame layer in top right corner

Select EC_TH_Tree element - resize by 85%

Paste and position on top of moon layer where desired
Select Blue Oval layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original oval layer

Select Right Green Circle layer

Select all, float, defloat

Paste paper EC_TH_P1

Select invert, delete, select none

Delete/Hide original circle layer

Select Left Green Circle

Repeat above steps

Select Large Purple Circle layer

Select all, float, defloat

Paste Paper EC_TH_P11

Select invert, delete, select none

Effect, Texture Effect, Weave (Gap size 3, Width 7, Opacity 2, Fill gaps checked)

Delete/Hide original circle layer

Select Orange Square layer

Select all, float, defloat

Paste paper EC_TH_P8

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 311

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, October 27, 2012

EMO WINTER






Supplies needed:

I am using the amazing art from Alex Prihodko for this tutorial, which you can find here

Scrapkit: I am using a awesome kit from Amy Marie called "Emo Winter" which you can get by going here

Template 94 from Millie which can be found here

Designs by Vaybs Mask 133 here

Plugins used: Alien Skin Eyecandy 5 - Textures, Alien Skin Eyecandy 5 - Nature (Snow Drift), Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 27 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Image, Adjust Canvas Size 750 x 700 (You can resize later)

Select Wordart layer 9

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy Glass at default settings

Apply Eyecandy - Gradient Glow on fat default settings

Apply Eye Candy 5 - Snow Drift at the following settings:

Delete/Hide original wordart layer

Select Circle 8 layer

Select all, float, defloat

Add new raster layer and flood-fille with gradient of choice (Radial style, Angle 45, Repeat 5)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Frame4 element - resize by 90%

Paste and position on top of circle layer

Apply Eye Candy 5 - Snow Drift with the following Light Dusting default setting:


Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eye Candy 4 - Textures with the following Animal Fur settings:


Delete/Hide original rectangle layer

Select Square 3 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Delete/Hide original square layer

Select Square 4 layer

Repeat above steps

Select Icy element - resize by 90%

Paste and position on top of square layers

Select Half Circle 5 layer

Select all, float, defloat

Paste paper pp024

Select invert, delete, select none

Delete/Hide original half circle layer

Select Rectangle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Delete/Hide original rectangle layer

Select Square 1 layer

Select all, float, defloat

Paste paper pp013

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 133

Merge group and move to the bottom

Select Snowbacking element and paste on top of mask layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, October 24, 2012

CUTE BUT BAD




Supplies needed:

I am using the amazing art from Skyscraps Pinup for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Broken Sky Dezine called "I'm Not Broken" which you can get by going here

Template 334 from Divine Intentionz which can be found here

Mask 160 from Insatiable Dreams here

Plugins used: Penta - Jeans, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 24, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Image, Adjust Canvas Size 850 x 650 (You can resize later)

Select Circle left 2 layer

Select all, float, and defloat

Paste paper BSD5

Select invert, delete

Paste close-up tube of choice on top of paper and delete

Select none

Change closeup to Hard Light

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Delete/Hide original circle layer

Select Circle Right 2 layer

Repeat above steps/settings

Select Glittered circle left 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original circle layer

Select Glittered Circle Right 2 layer

Repeat above steps

Select Circle Left layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Circle Right layer

Repeat above steps

Select Frame 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Jeans with the following settings:


Delete/Hide original frame layer

Select Frame 2 layer

Repeat above steps/settings

Select Frame 1 background layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeup to Luminence (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 55%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opacity 15, Horizontal and Light from left/top checked)

Delete/Hide original square back layer

Select Frame 2 background layer

Repeat above steps/settings

Select Med circle layer

Select all, float, defloat

Paste paper BSD11

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, Weave (Gap size 3, Width 7, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Hide/Delete original circle layer

Select Glittered Circle 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original circle layer

Select BSD47 element - resize by 90%

Paste and reposition below circle layers in the center of canvas

Select Rectangle 1 layer

Select all, float, defloat

Paste paper BSD6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer

Repeat above steps

Select Wordart by Missy layer

Move and reposition where desired

Add new raster layer and flood-fill with color of choice

Reselect wordart layer

Select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Delete/Hide original wordart layer

Select dotted lines layer

Repeat above steps

Select bottom pixel words layer and delete like I did or repeat above steps if you want to keep it

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select BSD28 element - resize by 95%

Paste and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 160

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, October 23, 2012

AUTUMN PRINCESS





Supplies needed:

I am using the amazing art from Unholy Vault Designs. Unfortunately, you can no longer purchase this artwork.

Scrapkit: I am using a kit from Sleek N Sassy Designs called "Autumn Fantasy" which you can get by going here

Template 50 from Millie which can be found here

Mask 132 from Aqua here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 23, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Autumn Princess Wordart Raster 7

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Delete/Hide original wordart layer

Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effect, Texture Effect, Fine Leather with the following settings:


Delete/Hide original rectangle layer

Select Square Raster 5 layer

Select all, float, defloat

Selections, Modify, Contract by 5

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminence (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 75%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Select Square Raster 5 layer again

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at subtle hump default settings

Hide/Delete original square layer

Select Circle Raster 4 layer

Select all, float, defloat

Paste AF_Paper1

Select invert, delete, select none

Delete/Hide original circle layer

Select Square Raster 3 layer

Select all, float, defloat

Paste AF_Paper4

Select invert, delete, select none

Delete/Hide original square layer

Select Square 2 layer

Repeat above steps

Select Circle 1 layer

Select all, float, defloat

Paste AF_paper3

Select invert, delete, select none

Effects, Texture Effects, Texture with the following Wood grain settings:


Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select AF_Element 4 - resize by 65%

Paste and reposition on the bottom and move to the bottom layer

Duplicate and flip

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 170

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

RAWKIN GOTH




Supplies needed:

I am using the amazing art from Angela Newman for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Scrappin Krazy Designs called "Rawkin Goth" which you can get by going here

Template 105 from Tamie which can be found here

Mask 170 from Insatiable Dreams here

Plugins used: Alien Skin Xenofex 2 - Burnt Edges, Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 23, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart Raster 8

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 60%, Monochrome checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Delete/Hide original wordart layer

Select Copy of Wordart 8 and repeat above settings/steps

Select Frame Raster 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Delete/Hide original frame layer

Select Circle Raster 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Hard Light

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 70%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Square Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Delete/Hide original square layer

Select Square Raster 2 layer

Select all, float, defloat

Paste paper p06

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 3 layer

Select all, float, defloat

Paste paper p15

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangle 10 layer

Select all, float, defloat

Paste paper p05

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 4 layer

Select all, float, defloat

Paste paper p12

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Raster 6 layer

Select discoball element - resize by 95%

Paste and reposition on top of circle layer to the right

Select Rectangle Raster 11

Select all, float defloat

Paste paper p10

Select invert, delete, select none

Apply Xenofex 2 - Burnt Edges with the following settings:


Delete/Hide original rectangle layer

Select Cane element - Image mirror and resize by 75%

Paste and reposition on top of burnt rectangle layer to the top left

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 170

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, October 21, 2012

SAVE THE TATA'S




Supplies needed:

I am using the amazing artwork from Ken Jeremiassen for this tutorial, which you can find here

Scrapkit: I am using an awesome freebie kit from Inzpired Creations called "Save The Tata's" which you can get by going on the Misfits blog here

Yezmask 015 here

Amperzand font here

Plugins used: Xero-Fritillary, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 21, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 700 x 650 blank canvas

Select Frame 1 element - resize by 75%

Paste in the center of your canvas

Select your magic wand tool and click in the center of the frame (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper layer under the frame

Apply Xero - Fritillary with the following settings


Copy and paste tube of choice in the center of frame where desired

Duplicate tube and move original below frame layer

Now select duplicate tube and erase any overhanging pieces

Select original tube layer again and apply dropshadow of choice

Select Butterfly 2 element - resize by 35%

Paste and reposition on left side of frame layer

Select wordart element - resize by 58%

Paste and reposition on the bottom as shown

Apply Eyecandy - Gradient Glow at fat default settings (change colors on glow if you desire)

Paste paper 1 as a new layer

Move layer to the bottom of the template

Apply Mask 15

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Friday, October 19, 2012

SOMETHIN' WICKED




Supplies needed:

I am using the amazing art from Gothique Starr for this tutorial, which you can find here

Scrapkit: I am using a kit from Karra's Kreative Korner called "Somethin' Wicked" which you can get by going here

Halloween Temp 3 from Scrapity Scrap which can be found here

Bastarda-K font here

Gems Mask 22 here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 19, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layers and delete if you prefer a different saying

Select text tool and type out new words or saying

Convert to raster and apply gradient glow of choice

Select Small Rectangle layer

Select all, float, and defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original rectangle layer

Select White Rectangle layer

Select all, float, defloat

Paste kkpaper5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Big Rectangle layer

Select all, float, defloat

Paste kkpaper6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Border Thin Rectangle layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Gradient Glass at default settings

Delete/Hide original frame layer

Select Thin Rectangle layer

Select all, float, defloat

Paste kkpaper9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Oval layer

Select all, float, defloat

Paste kkpaper7

Select invert, delete, select none

Delete/Hide original oval layer

Select kk_spiderweb element - resize by 75%

Paste and reposition on top of oval layer

Erase any bits that stick out

Select kk_frame1 element - Image, mirror

Paste and reposition on top of web layer

Select Circle layer

Select all, float, defloat

Paste kkpaper2

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select kk_swirl element

Paste and reposition on top left corner

Move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, October 17, 2012

ZOMBIE BABE




Supplies needed:

I am using the amazing art from Cliff Thomas for this tutorial, which you can find here

Scrapkit: I am using a kit from Addictive Pleasures called "Lady Mishkas - Zombie" which you can get by going here

Template 85 from Tamie which can be found here

Vix Big Mask 005 here

Plugins used: Eyecandy 4000 - Drip, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 17, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart Raster 15 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy Glass at default settings to the Zombie word

Delete/Hide original wordart layer

Select Wordart Raster 9 layer

Repeat above steps


Select Circle Frame Raster 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original frame layer

Select Circle Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 50%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Circle Frame Raster 14 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original frame layer

Select Circle Raster 13 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 50%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper p11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 8 layer

Select all, float, defloat

Paste paper p2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select your pen tool (width set to 7)

Draw a line on the top of your rectangle paper layer

Convert to raster and apply Eyecandy Drip with the following settings:



Select Rectangle Raster 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Weave (Gap size 3, Width 9, Opacity 2, Fill gaps checked)

Delete/Hide original rectangle layer

Select Rectangle Raster 4 layer

Select all, float, defloat

Paste paper p7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select your pen tool again and draw another line with same width as before on top of paper layer

Apply Eyecandy Drip with same settings from above

Select Circle frame Raster 12 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original frame layer

Select Circle Raster 6 layer

Select all, float, defloat

Paste paper p3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 2 layer

Select all, float, defloat

Paste paper p6

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Bad Dream at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 5

Merge group and move to the bottom

Add any elements you like

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LIVING DEAD GIRL





Supplies needed:

I am using the amazing art from Alfadesire for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Amy Marie called "Living Dead Girl" which you can get by going here

Template 159 from Punky Butts which can be found here

Designs by Vaybs Mask 79 here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 15, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Right Orange Circle frame

Select all, float, defloa

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Right orange circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 75%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Center Green Square layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Delete/Hide original square frame

Select Center Green Square layer

Select all, float, defloat

Paste paper pp014

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Left Orange Circle frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select Left Orange Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 75%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Left Black Square layer

Select all, float, defloat

Paste paper pp025

Select invert, delete, select none

Delete/Hide original square layer

Select Right Black Square layer

Repeat above steps

Select drip2 element - resize by 58%

Paste and reposition on top of right black square layer

Select Left Lite Orange Square layer

Select all, float, defloat

Paste paper pp015

Select invert, delete, select none

Delete/Hide original square layer

Select Right Lite Orange Square layer

Repeat above steps

Select Right Small Square layer

Select all, float, defloat

Paste paper pp024

Select invert, delete, select none

Delete/Hide original square layer

Select Left Small Square layer

Repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select fog element

Paste behind tube and drop opacity down to 85%

Select flyingkeys element - resize by 80%

Paste and reposition behind tube layer

Free rotate left 20%

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 79

Merge group and move to the bottom

I applied the following Dither texture:

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, October 14, 2012

BCA HOPE




Supplies needed:

I am using the amazing art from Ismael Rac for this tutorial, which you can find here

Scrapkit: I am using an awesome freebie kit from Niqui's Designs called "Hope" which you can get by going here

Template 167 from Punky Butts which can be found here

Mask 4 by Butterfly Flutterby here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 14, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Check Your Rack Circle Wordart

Add new raster layer and flood-fill with color of choice

Reselect wordart layer

Select all, float, defloat

Select color layer you just filled

Select invert, delete, select none

Delete/Hide original wordart layer

Select remaining wordart layers and repeat above steps

Select Pink Circle layer

Selections, Modify, Contract by 25

Paste nq-paper 1

Select invert, delete, select none

Reselect Pink Circle layer again

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 5, Fill gaps checked)

Delete/Hide original circle layer

Select Rectangle 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original rectangle layer

Select Rectangle 2 layer

Select all, float, defloat

Paste nq-paper5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle layer

Select all, float, defloat

Paste nq-paper7

Select invert, delete, select none

Delete/Hide original rectangle layer

Now Select all of the rectangle frame layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 4

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, October 13, 2012

EMO-WEEN




Supplies needed:

I am using the amazing art from Loshadka for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Scraps Dimensions called "Emo-Ween" which you can get by going here

Halloween Template 2 from Punky Butts which can be found here

Mask 177 by Insatiable Dreams here

Plugins used: Alien Skin Eyecandy Impact - Extrude, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 13, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layer and delete

Select Rectangle 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Texture with the following brick texture:


Apply Alien Skin Impact - Extrude with the following settings:


Delete/Hide original rectangle layer

Select Square 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 65%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original square layer

Select Square 6 layer

Repeat above gradient steps

Select sd-element 41 (tree) - resize by 55%

Paste and reposition on top of rectangle layer to the left

Image mirror

Select sd-element40 (house) - resize by 50%

Paste and reposition on top of tree layer to the left

Image mirror

Select Circle 5 layer

Select all, float, defloat

Paste sd-paper1

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle 4 layer

Select all, float, defloat

Paste sd-paper5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 3 layer

Repeat above steps

Select Square 2 layer

Select all, float, defloat

Paste sd-paper3

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer

Repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 177

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, October 12, 2012

BLEEDING LOVE





Supplies needed:

I am using the amazing art from Uchakina for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Rissa's Designs called "Bleeding In Love" which you can get by going here

Template 162 from Punky Butts which can be found here

Weescotslass Mask 192 here

Plugins used: Xero - Fritillary, Eyecandy 4000 - Glass, Tramages - Tow the Line, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 12, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Vamp wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Move wordart if you desire (Rotate Left 90 degrees)

Select Is A Glow Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original wordart layer

Select The Lady wordart layer and repeat above steps

Select Square Black Right layer

Apply Tramages - Tow the Line with the following settings:


Select Square Black Left layer

Repeat above step

Select Right Red Larger Rectangle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 4)

Select none

Apply Xero-Fritillary with the following settings:


Delete/Hide original rectangle layer

Select Left Red Larger Rectangle layer

Repeat above steps/settings

Select Right Red Small Rectangle

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Photoeffex - Scanlines with the following settings:


Delete/Hide original rectangle layer

Select Left Small Red Rectangle layer

Repeat above steps/settings

Select Large Circle layer

Select all, float, defloat

Paste RD_Paper11

Select invert, delete, select none

Delete/Hide original circle layer

Select Bottom Black Rectangle layer

Select all, float, defloat

Paste RD_Paper15

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Top Black Rectangle layer

Repeat above steps

Select RD_Swirlie element

Paste and reposition on right side

Select Top Right Dark grey Square layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 3)

Select none

Delete/Hide original rectangle layer

Select Top Left, Bottom Right, and Bottom Left Dark Grey Square layers and repeat above steps/settings

Select Top Right Light Grey Square layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Delete/Hide original square layer

Select Top Left, Bottom Left and Bottom Right Light Grey Square layers and repeat above steps/settings

Select Circle dots layer

Add new raster layer and flood-fill with color of choice

Select Circle dots layer again

Select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Delete/Hide original dots layer

Select Right Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select left circle layer

Repeat above steps/settings

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 192

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LET'S RACE




Supplies needed:

I am using the amazing artwork from Cliff Thomas for this tutorial, which you can find here

Scrapkit: I am using an awesome freebie kit from The Okie Toothfairy called "Let's Go Racing Boys!" which you can get by going here

Plugins used: Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 12, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 700 x 650 blank canvas

Select Element 8 frame - resize by 30%

Paste in the center of your canvas

Select your magic wand and click in the center of your frame (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 7 on top of frame - resize by 20%

Select invert, delete, select none

Move paper layer under frame

Select element 65 - resize by 45%

Paste on top of paper layer under frame

Select element 5 - resize by 15%

Paste on top of frame layer

Copy and paste tube of choice and position where desired

Apply Xero Bad Dream at setting of choice

Apply Lokas 3D Shadow

Select element 4 - resize by 18%

Paste and reposition on the botton of tag and move element to the bottom layer

Select element 38 - resize by 33%

Paste and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, October 10, 2012

HALLOWEEN DEMON




Supplies needed:

I am using the amazing artwork from Spazz for this tutorial, which you can find here

Scrapkit: I am using a wicked kit from Irish Bitch Designs called "Pumpkin Witch" which you can get by going here

Template 159 from Leah which can be found here

Mask 34 by Brutal Designs here

Plugins used: Eyecandy 4000- Glass, Xero - Fritillary, Penta - Color dots, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 10, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Words 3 Back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Words 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Apply Eyecandy Glass at default settings

Delete/Hide original words layer

Select Square 1 layer

Select all, float, defloat

Paste IBD-Paper 5

Select invert, delete, select one

Delete/Hide original Square layer

Select IBD_Claws element - resize by 20%

Paste and reposition on top of paper 5 layer to the left

Select Square 2 layer

Effect, Texture Effect, Weave (Gap size 2, Width 5, Opacity 5, Fill gaps checked)

Select Circle 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effect, Texture Effects, Snake Texture with the following settings:


Delete/Hide original circle layer

Select Square 4 layer

Select all, float, defloat

Paste IBD_Paper6

Select invert, delete, select none

Colorize paper with these settings if desired:


Delete/Hide original square layer

Select Square 6 layer

Repeat above steps/settings

Select Square 7 layer

Repeat above steps/settings

Select Square 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Apply Xero Fritillary with following settings:


Delete/Hide original square layer

Select Circle 8 layer

Effect, Texture Effect, Weave (Gap size 2, Width 5, Opacity 5, Fill gaps checked)

Select Square 9 layer

Select all, float, defloat

Paste IBD_Paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Square 10 layer

Repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Paste on bottom left side and move to the bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Brutal Mask

Merge group and move to the bottom

Apply Penta - Colordots at default settings

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, October 7, 2012

TRICKSTER




Supplies needed:

I am using the amazing artwork from Sweet-PinUp for this tutorial, which you can find here

Scrapkit: I am using a wicked kit from Toxic Desirez called "Trickster" which you can get by going here

Template 179 from Toxic Desirez which can be found here

Mask of choice

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 7, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Circle layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Frame 3 from kit

Paste in the center of your canvas

Image, Free rotate, Left 20 degrees

Select your magic wand and click in the center of the frame

Selections, Modify, Expand by 2

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tubes of choice on top of gradient and delete

Select none

Change closeups to Hard Light

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of gradient

Move gradient/tube layer below frame layer

Apply Lokas Shadow to frame layer at default settings

Select Bottom Round Rectangle layer

Select all, float, defloat

Paste paper 24

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Top Round Rectangle layer

Repeat above steps

Select Bottom Red Circle

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Paste close-up tube of choice and delete

Select none

Apply Xero - Bad dream at setting of choice

Drop the opacity on close-up down to about 80%

Apply dropshadow and merge down on top of paper layer

Apply Effects, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Top Red Circle layer

Repeat above steps/settings

Select Rectangle layer

Select all, float, defloat

Paste paper 26

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Spider & Web element - resize by 60%

Image mirror and paste on top left of rectangle layer

Select Bottom Black Square layer

Select all, float, defloat

Paste paper 21

Select invert, delete, select none

Delete/Hide original square layer

Select Top Black Square layer

Repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Paste on bottom left side and move to the bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, October 5, 2012

ENCHANTING RAVEN





Supplies needed:

I am using the amazing artwork from Kurama Phoenix for this tutorial, which you can find here

Scrapkit: I am using a wicked kit from Scrappin Krazy Designs called "Raven" which you can get by going here

Template 35 from Kandi Kisses which can be found here

Mask of choice

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 5, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Small Pink Rectangle and delete

Select Frame 4 element - resize by 50%

Paste and reposition on right side of template

Select your magic wand (hold shift) and click in the center of each frame part

Selections, Modify, Expand by 2

Paste paper pp2

Select invert, delete

Paste close up tube of choice on top of paper and delete

Change closeup to Hard Light

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of paper

Move paper/tube layer below frame layer

Apply Lokas Shadow to frame layer at default settings

Select middle frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select middle back layer

Select all, float, defloat

Paste paper pp1

Select invert, delete, select none

Delete/Hide original middle back layer

Select bottom frame layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Delete/Hide original frame layer

Select bottom back layer

Select all, float, defloat

Paste paper pp10

Select invert, delete, select none

Hide/Delete original bottom back layer

Select top frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select top back layer

Select all, float, defloat

Paste paper pp10

Select invert, delete, select none

Delete/Hide original top back layer

Select Large pink rectangle layer

Select all, float, defloat

Paste paper pp6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select tree element - resize by 78%

Paste and reposition on right side

Select moon element - resize by 55%

Paste and reposition on right side under tree element

Select cloud element 38

Paste and position on top of moon layer

Select Black Circle layer

Select all, float, defloat

Paste paper pp5

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Paste on bottom left side and move to the bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, October 3, 2012

ROCKITUDNESS





Supplies needed:

I am using the amazing artwork from Very Many for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Eclipse Creations called "Hot Girl" which you can get by going here

Template 375 from Missy which can be found here

Tonya Grunge 1 Mask here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 3, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select frame layer

Select all, float, defloat

Add a new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 50%, Monochrome checked)

Delete/Hide original frame layer

Select Frame Back layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient and delete

Change closeup to Luminence (Legacy)

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effects, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Hide/Delete original frame back layer

Select EC_HG_DiscoBall element

Paste in the center under your frame back square layer

Select Oval Frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original oval frame layer

Select Oval layer

Select all, float, defloat

Paste paper EC_HG_P6

Select invert, delete, select none

Delete/Hide original oval layer

Select Circle 2 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient and delete

Change closeup to Hard Light

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of gradient

Apply Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Circle 1 layer

Repeat above steps/settings

Select Rectangles layer

Select all, float, defloat

Paste paper EC_HG_P7

Select invert, delete, select none

Delete/Hide original rectangles layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select EC_HG_Musicnotes element - resize by 80%

Paste on bottom left side and move to the bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Grunge 1 Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, October 2, 2012

WICKED DEMONA




Supplies needed:

I am using an Exclusive artwork from Celine Pinups for this tutorial, which you can find here

Scrapkit: I am using a wicked kit from Amy Marie called "Skulls N Roses" which you can get by going here

Template 171 from Tami which can be found here

Tonya Grunge 2 Mask here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 2, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Attitude Word Art layers and delete if you want your own wording

Change your palette to gradient or color of choice

Select your text tool and type out wording of choice

Convert wording to raster layer

Select all, float, defloat

Selections, Modify, Expand by 4

Add a new raster layer and flood-fill with color of choice

Select none

Move layer behind your wording

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select your top wording layer again

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 25%, Monochrome checked)

Apply Eyecandy - Glass at default settings

Select Square Frame Raster 10 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 60%, Monochrome checked)

Select Square Raster 7 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient and delete

Change closeup to Hard Light

Drop the opacity on close-ups down to about 60%

Apply dropshadow and merge down on top of paper

Hide/Delete original square layer

Select Square Raster 1 layer

Select all, float, defloat

Paste paper pp017

Select invert, delete, select none

Delete/Hide original square layer

Select Circle frame Raster 11 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select Circle Raster 6 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient and delete

Change closeup to Hard Light

Drop the opacity on close-ups down to about 60%

Apply dropshadow and merge down on top of paper

Hide/Delete original circle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper pp9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square Raster 2 layer

Select all, float, defloat

Paste paper pp8

Select invert, delete, select none

Delete/Hide original square layer

Select SkullSpider element - resize by 30%

Paste and reposition on top of paper 8 layer

Select Circle Raster 5 layer

Select all, float, defloat

Paste paper pp9

Select invert, delete, select none

Delete/Hide original circle layer

Select Oval Raster 12 layer

Select all, float, defloat

Paste paper pp014

Select invert, delete, select none

Delete/Hide original oval layer

Select Circle Raster 4 layer

Select all, float, defloat

Paste paper pp015

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Grunge 2 Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif