I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo SCDblnk_byangelsdesignz.gif
 photo PPPBlinkie2_zps90ae120a.gif
 photo KKfan_byevolangel_zpsyiycjybi.gif

Blog Archive

Facebook

Thursday, February 28, 2013

SWEET CHOCOLATE AND COFFEE





Supplies needed:

I am using the amazing art from Amy Matthews for this tutorial, which you can find here

Scrapkit: I am a gorgeous kit from Soxsational Scraps called "Cassatta Coffee! Sweet and Wild" which you can get by going here

DBV Mask 130 from Designs by Vaybs which you can find here

Beauty of Autumn Mask by Tonya with you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Porcelain, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 28, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 800 x 650 blank canvas (we can resize it later)

Select Frame 2 and paste in the center of the canvas

Select your magic wand tool and click in the center of your original frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Copy and paste close-up tube of choice on top of paper layer to the left

Select invert, delete, select none

Change close-up to Luminence (Legacy)

Drop opacity on close-up down to 70%

Paste tube of choice where desired on top of frame

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Now Select your Eclipse tool (Color Pallet - Foreground: #000000
X out your Backgroud color, Stroke Witdth 4)

Draw a circle over/around your frame layer

If it’s too big or small resize or pick it smaller.

Move your mouse/cursor over the top center of the circle you just made. When you see a Rocking A click your mouse. A text box will open.

Type Chocolate and Coffee or whatever words you choose.

In your layers pallet click on the + sign.

Close or X out the New Eclipse layer as shown

Now highlight vector 1 layer and right click/convert to Raster layer.

Apply Eyecandy Gradient Glow at fat default setting (Glow Width 3)

Select Harp Element - resize by 80%

Image, mirror and paste on right side of frame

Select Chocolate Pop Element - resize by 54%

Paste and position on right side above harp element

Select Chocolate Cookie Element - resize by 35%

Image, Free Rotate Left by 15%

Paste and position on left side

Select Chocolate Rose Element - resize by 20%

Paste and position on bottom left above cookie element

Select Cup1 Element - resize by 25%

Paste and position on bottom left above rose element

Select Chocolate 1 Element - resize by 45%

Paste and position on bottom right side above harp element

Select Ice Cream2 Element - resize by 40%

Paste and position on bottom right side next to chocolate 1 element

Select paper 5 and paste onto canvas and move to the bottom layer

Move layer to the bottom of the template

Apply Beauty of Autumn Mask and merge group

Select paper 6 and paste/move to bottom layer of canvas

Apply Mask 130 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

IRISH EMO ROCK





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using stunning matching kit from Bibi's Collections called "Irish Emo Rock" which you can get by going here

Template 154 from Pooker which can be found here

Mask 54 from Simone which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 28, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 750 (you can resize later)

Select Dotted Square layer

Add new raster layer and flood-fill with color of choice

Reselect dotted square

Select all, float, defloat

Go back to color layer you just filled

Select invert, delete, select none

Delete/Hide original dotted square layer

Select Pink Square layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original square layer

Select Lt. Pink Square layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, weave (Gap size 2, Width 4, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original square layer

Select Black Squares layer

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeup to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-ups down to 85%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original squares layer


Select Pink Rectangles layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original squares layer

Select Lt. Pink Rectangles layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangles layer

Select Pink Circles layer

Select all, float, defloat

Paste paper 18

Select invert, delete, select none

Delete/Hide original circles layer

Select White Circles layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original circles layer

Select Element 30 - resize by 50%

Paste and position on top left side above white circles layer

Select Strips layer

Apply Effects, Texture Effects, weave (Gap size 2, Width 6, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Select Element 24 - resize by 85%

Paste and position on top right corner

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 75%

Select Element 96 - resize by 50%

Paste and position on bottom right side

Select Element 92 - resize by 40%

Paste and position on bottom left side

Select Element 26 - resize by 60%

Paste and position on bottom left above cupcake element

Select Element 61 - resize by 90%

Paste and position on bottom left side below tube layer

Apply Eyecandy - Gradient Glow at fat default settings (Glow width 3)

Paste and position on bottom behind tube layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 54

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, February 26, 2013

LUCKY DAYS





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using stunning matching kit from Bibi' Collections called "Lucky Night" which you can get by going here

Template 183 from Tamie which can be found here

Mask 288 from Trese which you can find here

Plugins used: Alien Skin Eycandy 5 - Impact - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 26, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 750 (you can resize later)

Select Wordart 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy, Impact - Glass at default settings

Delete/Hide original wordart layer

Select Wordart 10 back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Rectangle 8 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Element 58 and paste on top of rectangle 8 layer

Select Element 102 - resize by 28%

Paste and position on left side above element 58

Select Square Raster 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, weave (Gap size 3, Width 7, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original square layer

Select Square Copy of Raster 2 layer and repeat above steps

Select Rectangle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 85%

Apply dropshadow and merge down on top of gradient layer

Apply Effects, Texture effect, Blinds at Width 2, Opacity 15

Delete/Hide original rectangle layer


Select Copy of Raster 7 layer and repeat above steps

Select Oval Raster 4 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original oval layer

Select Circle Raster 3 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Copy of Circle Raster 3 layer and repeat above steps

Select Rectangle 6 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 5 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Copy of Raster 5 layer and repeat above steps

Select Element 42 - resize by 85%

Paste and position on top of Circle 5

Image, duplicate and mirror

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 64 - resize by 85%

Paste and position on left right side behind tube layer

Select Element 80 - resize by 30%

Paste and position on top right side

Select Element 24 - resize by 70%

Paste and position on bottom left side

Select Element 82 - resize by 40%

Paste and position on bottom left side above element 24

Select Element 57 - resize by 45%

Paste and position on bottom right side

Select Element 14 - resize by 60%

Paste and position on right side below element 57

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 288

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LIVING THE LIFE




Supplies needed:

I am using the amazing art from Arthur Crowe for this tutorial, which you can find here

Scrapkit: I am using the matching kit from Rissa's Designs called "Sencitive" which you can get by going here

Template 192 from Millie which can be found here

Dead Sexy Mask from Candy Treats which I think you can find here

Plugins used: Alien Skin Eycandy 5 - Impact - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 25, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Stars 8 and 10 layers and apply Eyecandy Impact Glass at default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Wordart 9 layer and move if desired

Select Rectangle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeups to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 85%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original rectangle layer

Select Rectangle 6 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 5 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Apply Eyecandy, Impact - Glass at default settings

Delete/Hide original rectangle layer

Select Circle 4 layer

Select DiscoBall Element - resize by 55%

Paste and position on top of circle 4 layer

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Cityscape Element and paste in the center on top of rectangle 2 layer

Select Square 1 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select PunkSock Element - resize by 65%

Paste and position on left side

Select Guitar Element - resize by 65%

Paste and position on left side above sock element

Select FlamePop Element - resize by 75%

Paste and position on right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply DeadSexy Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, February 25, 2013

MAGICALLY DELICIOUS





Supplies needed:

I am using the amazing art from Ismael Rac for this tutorial, which you can find here

Scrapkit: I am using the matching kit from Broken Sky Dezine called "Sexy Drink" which you can get by going here

Collab Template from Dee and Kandi, which can be found here

St. Patrick's Day Mask from Crys which you can find on the Misfits Blog here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 25, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Orange Circle layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Green Squares layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 75%

Apply dropshadow and merge down on top of gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original squares layer


Select Yellow Oval layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original oval layer

Select Orange Square layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Orange Circle layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer
Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 35 - resize by 78%

Paste and position in upper left corner behind shamrock

Select Element 31 - resize by 35%

Paste and position on bottom right

Select Element 19 - resize by 40%

Paste and position on bottom right next to element 31

Select Element 10 - resize by 40%

Paste and position on bottom left

Select Element 34 - resize by 22%

Paste and position on bottom left above element 10

Select Element 21 - resize by 30%

Paste and position on the left above shamrock

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Crys Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, February 23, 2013

SWEET LOLITA





Supplies needed:

I am using the amazing art from Sarafairy for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Misty Lynn's Creations called "Lolita" which you can get by going here

Template 448 from Missy, which can be found here

Mask 21 from Gina Gem which you can find here

Plugins used: Penta - Color Dot, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Frame 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original frame layer

Select Frame 3 and remaining Frame layers and repeat above steps

Select Frame back 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-ups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 75%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original frame back layer

Select Select Frame Back 3 layer and repeat above steps

Select Thin Rectangle 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta Color Dot with the following settings:


Delete/Hide original rectangle layer

Select Thin Rectangle 2 layer and repeat above steps

Select Double Frame Back layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original frame back layer

Select Rounded Edge Rect layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rounded Edge Rect2 layer and repeat above steps

Select Circle Frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original circle frame layer

Select Circle layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original Circle layer

Select Circle back layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original circle back layer

Select Thin Rectangle 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Daze Texture with the following settings:



Delete/Hide original rectangle layer

Select Thin Rectangle 4 and Thin Rectangle 5 and repeat above steps

Select Square layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Rainbow Element - resize by 70%

Image, Free Rotate Right by 15%

Paste in upper right corner below tube layer

Select Flower Sucker 2 Element - resize by 50%

Image Free Rotate Left by 20%

Paste on upper left side below frame back layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 21

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, February 22, 2013

Celtic Knot Extra's





These Extra's were made using the amazing art by Samuel Silva, which you can find at Indie-Zine here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.

ROCKIN NIGHTS






Supplies needed:

I am using the amazing art from Verymany for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Amy Marie called "Rockin Nights" which you can get by going here

Template 239 from Denz Designz, which can be found here

Mask 46 which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 22, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Pink Strip layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Weave (Gap size 3, Width 5, Opacity 5, Fill gaps checked)

Delete/Hide original strip layer

Select Black Shape layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original shape layer

Select White Rectangles layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangles layer

Select Pink Circles layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 80%

Apply dropshadow and merge down on top of gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Select none

Delete/Hide original circles layer


Select Black Square 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Black Square 2 layer and repeat above steps

Select White Shapes layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original shapes layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 2 layer and repeat above steps

Select Element 27 - resize by 40%

Paste and position on top of circle 2 layer

Select Strip 1 layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original strip layer

Select Strip 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original strip layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 32 and paste on the right side behind tube layer

Select Element 7 - resize by 70%

Image, Free Rotate Right by 10%

Paste and position on the bottom of tube layer

Select Element 8 - resize by 80%

Paste and position on right side

Select Element 23 - resize by 50%

Paste and position on right side next to element 8

Select Element 66 - resize by 40%

Image, mirror and paste on right side

Select Element 21 - resize by 80%

Image, Free Rotate Left by 20%

Paste and move to the bottom layer where desired

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply DMask 6

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, February 20, 2013

SKULL*A*TUDE





Supplies needed:

I am using the amazing art from Lady Mishka for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Toxic Desirez called "Skullette" which you can get by going here

Template 128 from Punky Butts, which can be found here

DMask 06 which you can find here

Plugins used: Penta - Jeans, Eyecandy 4000 - Gradient Glow, Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 20, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Delete/Hide original wordart layer

Select Skull Line layer

Add new raster layer and flood-fill with color of choice

Reselect Skull line layer

Select all, float, defloat

Select color layer you just filled

Select invert, delete, select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original skull line layer

Select Star layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original star layer

Select 3 stars layer and repeat above steps

Select Circle right frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original circle layer

Select Circle Left frame layer and repeat above steps

Select Circle Right layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Left layer and repeat above steps

Select Rectangle layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Large Square layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 70%

Apply dropshadow and merge down on top of gradient layer

Select your Selections tool and select half the square

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Select none

Delete/Hide original square layer


Select Strip 2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original strip layer

Select Strip 1 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original strip layer

Select Large Circle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Right Bottom Circle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Left Square layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Jeans with the following settings:


Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select String Element - resize by 75%

Paste and position behind tube layer

Select Flame Element - resize by 50%

Paste and position on bottom left side

Image, duplicate, mirror

Select Cupcake Element - resize by 26%

Paste and position on bottom left above flame element

Select Spiked Heart Element - resize by 25%

Image, Free Rotate Right by 15%

Paste and position on bottom right side

Select Lips Element - resize by 42%

Image, Free Rotate Left by 15%

Paste and position on top left

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply DMask 6

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, February 19, 2013

KISS MY SHAMROCKS






Supplies needed:

I am using the amazing art from Elias Chatzoudis for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Niqui's Designs called "Lucky Me" which you can get by going here

Template 200 from Millie, which can be found here

Mask 03 from Uchy which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Gradient Glow, Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select deco's 7 and 8 layers and delete

Select Wordart 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Delete/Hide original wordart layer

Select Wordart "Kiss My" 10 layer and move if desired

Select Circle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Overlay

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 65%

Apply dropshadow and merge down on top of gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Element 60 - resize by 25%

Paste and position on right side on top of circle layer

Select Circle 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original circle layer

Select Square 4 layer

Select all, float, defloat

Paste nq-paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Square 3 layer and repeat above steps

Select Rectangle 2 layer

Select all, float, defloat

Paste nq-paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Element 42 - resize by 30%

Image, Free Rotate Left by 10%

Paste and position on top left above rectangle layer

Select Element 41 - resize by 30%

Image flip, mirror and paste on top left above rainbow element

Select Circle 1 layer

Select all, float, defloat

Paste nq-paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 5 - resize by 55%

Paste and position below tube layer towards left side

Select Element 9 - resize by 35%

Paste and position on bottom left

Select Element 16 - resize by 25%

Paste and position on left side above element 9

Select Element 43 - resize by 50%

Paste and position on bottom right side

Select Element 21 - resize by 30%

Paste and position on bottom right side next to element 43

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 3

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LITTLE RED






Supplies needed:

I am using the amazing art from Victoria Star for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Irish Bitch Designs called "Ruby & the Wolf " which you can get by going here

Mask 4 from Butterfly Flutterby which you can find here

Plugins used: Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Gramma's House element and paste in the center of the canvas - resize by 65%

Select Tree1 Element - resize by 65%

Paste and position on left side below house layer

Select Fence Element - resize by 65%

Paste and position above house layer

Select Picnic Blanket Element - resize by 55%

Paste and position below fence layer

Select Rock2 Element - resize by 50%

Paste and position on right side above fence layer

Duplicate, mirror

Select Lantern Element - resize by 45%

Paste and position on right side above rock layer

Paste tube of choice on top where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Wolf Element - resize by 25%

Paste and position on left side

Select Deer2 Element - resize by 24%

Paste and position on right side

Select IBD_paper 5 as a new layer and move to the bottom layer

Apply Mask 4 and merge group

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, February 16, 2013

TOXIC BIATCH





Supplies needed:

I am using the amazing art from Arthur Crowe for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Soxsational Scraps called "Toxic Biatch" which you can get by going here

Collab Template 1 from Millie and Scrap Rebellion,which can be found here

Mask 4 from Butterfly Flutterby which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 16, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Rectangle 10 layer

Select all, float, defloat

Paste paper 4

Select invert, delete

Now select Broken Glass element and paste on top of paper and delete

Select none

Delete/Hide original rectangle layer

Select Rectangle 7 layer and repeat above steps

Select Dotted Square 9 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original square layer

Select Dotted Square 8 layer and repeat above steps

Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 70%

Apply dropshadow and merge down on top of gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Rectangle 5 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 4 layer and repeat above steps.

Select BiatchCity2 Element - resize by 85%

Paste and position in the center above rectangles 4 and 5 layers

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer and repeat above steps

Select Rectangle 1 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select BiatchMesh Element - resize by 65%

Paste and position in the center above the gradient layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Toxic-Drums Element - resize by 55%

Paste and position on bottom right

Select Chainsaw Element - resize by 55%

Image, mirror, Free Rotate Right by 20%

Paste and position on bottom left

Select Mesh Element

Paste and position in the center of the canvas and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 4

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Thursday, February 14, 2013

WAITING FOR YOUR LOVE






Supplies needed:

I am using the amazing art from Bonnies Creations for this tutorial, which you can find here

Scrapkit: I am using a gorgeous kit from Bibi's Collections called "Sabina Love" which you can get by going here

Template 3 from Millie which can be found here

M4 Mask from Kylie which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 14, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Hearts 12 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Apply Eyecandy 4000 - Glass at default settings

Delete/Hide original hearts layer

Select Square 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 1)

Paste close-up tube of choice on top of gradient and delete

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 90%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original square layer

Select Squares 8, 9, and 10 layers and repeat above steps

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 5 layer and repeat above steps

Select Rectangle 6 layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 4 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Select Square 3 layer and repeat above steps

Select Double Circle 2 layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original circles layer

Select Double Circles 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 41 - resize by 65%

Paste and position on top right corner

Select Element 10 - resize by 65%

Paste and position on right side

Select Element 43 - resize by 40%

Paste and position on bottom left side

Select Element 98 - resize by 55%

Paste and position on bottom left behind element 43

Select Element 81 - resize by 55%

Select Element 44 - resize by 35%

Paste and position on bottom right above element 44

Image, mirror and paste on bottom right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply M4 Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, February 13, 2013

WICKED VALENTINE







Supplies needed:

I am using the amazing art from Malberri for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Annaica's Place called "Vicious Valentine" which you can get by going here

Template 190 from Millie which can be found here

SG Heart Burst Mask from Essex Girl which you can find here

Plugins used: Eyecandy 4000- Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 13, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Resize template canvas to 750 x 650 (we can resize later)

Select Wordart 10 layer and move to the bottom if you desire

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice

Select none

Apply Eyecandy 4000 - Glass at default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Hearts 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-ups down to 75%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original hearts layer


Select Hearts 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 3, Width 7, Opacity 5, Fill gaps checked)

Apply Eyecandy Glass with same default settings

Delete/Hide original hearts layer

Select Squares 7 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original squares layer

Select Squares 5 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original squares layer

Select Hearts Circle 4 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Apply Eyecandy Glass at default settings

Delete/Hide original circle layer

Select Circle 3 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Frame Element 38 - resize by 75%

Paste and position on top of Circle 3 layer

Select Circle 2 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangles 1 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangles layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 28 - resize by 30%

Paste and position on bottom right

Select Element 27 - resize by 25%

Paste and position on bottom left

Select Element 16 - resize by 30%

Paste and position on bottom left behind element 27 layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Heart Burst Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, February 12, 2013

WINTER LOLITA





Supplies needed:

I am using the amazing art from Sarafairy for this tutorial, which you can find here

Scrapkit: I am using the matching kit from Hania's Design called "Winter Lolita" which you can get by going here

Template 129 from Millie which can be found here

Fall Fling Mask from Tonya which you can find on the Misfits Blog here

Plugins used: Alien Skin Xenofex 2 - Burnt Edges, Penta - Dot and Cross, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 12, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart 10 layer

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Snowflake 8 and 9 layer and delete

Select Circle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 60%

Apply dropshadow and merge down on top of gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Apply Eyecandy Gradient Glow at fat default settings (Glow width 5)

Delete/Hide original circle layer

Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Dot and Cross with the following settings:


Delete/Hide original rectangle layer

Select Square 5 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Crumpled Paper Texture with the following settings:


Apply Xenofex 2 - Burnt Edges with the following settings:


Delete/Hide original square layer

Select Circle 3 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 2 layer and repeat above steps

Select Square 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, weave (Gap size 3, Width 7, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide square layer

Select Element 29 - resize by 90%

Paste and position on top of Square 1 layer

Copy and paste tube of choice and position where desired

Apply Xero Bad Dream at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 45%

Paste and position on top left below square 4 layer

Select Element 42 - resize by 70%

Paste and position on bottom left

Select Element 40 - resize by 45%

Paste and position on bottom left above element 40

Select Element 70 - resize by 45%

Image, mirror and paste on bottom right

Select Element 50 - resize by 35%

Image, Free Rotate Right by 20%

Paste and position on bottom left above element 70

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Fall Fling Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, February 11, 2013

NAUTICAL RETREAT




Supplies needed:

I am using the amazing art from Legends Art (Danny Drake) for this tutorial, which you can now find here. Unfortunately, this specific artwork isn't available yet for purchase.

Scrapkit: I am using a beautiful kit from Scrappin Krazy Designs called "Nautical Retreat" which you can get by going here

Mask 451 by Vix which you can find here

Mask 11 by HorsePlay's Pasture which you can find here

Sand pattern here

Plugins used: Xero-Porcelain, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 11, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 800 x 700 blank canvas (we can resize it later)

Select Frame 1 and paste in the center of the canvas

Select your magic wand tool and click in the center of your frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 4

Paste paper 4

Select invert, delete, select none

Move paper below frame layer

Select Net2 Element

Paste and position on top of paper layer

Paste tube of choice on top of frame

Duplicate tube and move original below frame

Select copy of tube above the frame and erase any overhanging bits

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select Wave element and paste on top of tube where desired

Add the Sand jpeg I provided to your pattern palette as shown


Select your lasso (freehand selection wand)

Draw a selection on the bottom where you want your sand

Add new raster layer and flood-fill with sand color

Select none

You should now have something that looks like this


Select Driftwood1 Element - resize by 90%

Paste and position on the bottom of frame towards the right

Select Cupofshells Element - resize by 50%

Paste and position on bottom right

Select Leaves Element - resize by 40%

Paste and position behind cup element

Select Boat1 Element - resize by 60%

Paste and position on bottom left

Select Ring2 Element - resize by 30%

Paste and position on top of boat to the right

Paste Paper 3 on bottom layer

Apply Mask 11 from Horseplay and merge group

Select New raster layer and flood fill with color or gradient of choice

Apply Vix Mask 451 and merge group

Apply Effects, Texture Effects, Mosaic - Antique with the following settings:


Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, February 9, 2013

GOTHIC HEART




Supplies needed:

I am using the amazing art from Zindy S.D. Nielsen for this tutorial, which you can find here

Scrapkit: I am a gorgeous kit from Amy Marie called "Angelica" which you can get by going here

Mask M3 from Kylie which you can find on the Misfits Blog here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 8, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 800 x 700 blank canvas (we can resize it later)

Select Frame 33 and paste in the center of the canvas

Move frame down towards the bottom (about and inch from bottom)

Duplicate frame and flip

Move copy of frame up a bit so you have something like this:

Select your magic wand tool and click in the center of your original frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete, select none

Move background below frame layer

Select your magic wand and click in the center of the top frame

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with gradient of choice

Copy and paste close-up tube of choice on top of gradient layer

Select invert, delete, select none

I added Element 34 and pasted to the right of the close-up tube - resize by 80% and hit delete

Select none

Change close-up and clock element to Hard Light

Drop opacity on close-up down to 85%

Paste tube of choice where desired on top of frames

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 78 (tree) - Image mirror

Paste and position to the left on top of frames

Select Element 62 (fan) - resize by 60%

Image, Free Rotate Right by 20%

Select Element 64 (bird) - resize by 50%

Paste and position on top right

Select Element 54 - resize by 65%

Paste and position on right side behind frames layers

Select Element 23

Image, mirror and paste on the bottom

Select Element 27 - resize by 55%

Paste and position on right side

Select Element 39 - resize by 55%

Paste and position on bottom right

Select Element 35 - Image, mirror

Paste and position on top right side - move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply M3 Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, February 8, 2013

EMOFIED




Supplies needed:

I am using the amazing art from Lady Mishka for this tutorial, which you can find here

Scrapkit: I am using a stunning matching kit from Toxic Desirez called "Emofied" which you can get by going here

Collab Template 1 from Missy which can be found here

Mask 22 by Gina Gem which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 8, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Frame 3 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select your magic wand and click in the center of the frame

Selections, Modify, Expand by 2

Add new raster layer and flood-fill with gradient of choice
(Linear style, Angle 45, Repeat 1)

Paste close-up tube of choice on top of gradient

Select invert, delete, select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 90%

Apply dropshadow and merge down on top of gradient layer

Move layer below frame layer

Select Frame 1 and 2 and repeat above steps except change close-up on frame 2 to screen

Select Square 3 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Select Square 2 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original square layer

Select Circle 2 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Wordart Element - resize by 65%

Paste and position on top of Circle 2 layer

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Circle layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 3, Width 7, Opacity 5, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/Hide original rectangle layer

Select Splatter Element

Paste and position on top left side above rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Car Element - resize by 45%

Image, mirror and paste on bottom right below tube layer

Select Heart Element - resize by 40%

Image, Free Rotate Right by 20%

Paste and position on bottom right below car element

Select Beaded String Element - resize by 55%

Paste and position on bottom right above car element

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SWEET TOOTH CUTIE





Supplies needed:

I am using the amazing art from Celineart Pinup for this tutorial, which you can find here

Scrapkit: I am using a gorgeous kit from Niqui's Designs called "Love Cupcakes" which you can get by going here

Template 344 from Missy which can be found here

Mask 80 by Simone which you can find on the Misfits blog here

Plugins used: Alien Skin Eyecandy 5 - Impact/Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 7, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select glittered sweet tooth wordart layer

Add new raster layer and flood-fill with color of choice

Select none

Reselect your wordart layer

Select all, float, defloat

Click on the color layer you just filled

Select invert, delete, select none

Delete/Hide original wordart layer

Select your sweet tooth wordart, thin rectangle and dotted line layers

Group all of these layers together and move down a bit if you desire

Select your Sweet Tooth wordart layer

Add new raster layer and flood-fill with color of choice

Reselect wordart layer

Select all, float, defloat

Select your color layer you just filled

Select invert, delete, select none

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Delete/Hide original sweet tooth wordart

Select Thin Rectangle layer

Select all, float, defloat

Paste nq-paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Small Circle Right layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice
(Linear style, Angle 45, Repeat 1)

Select none

Paste close-up tube of choice on top of gradient and delete

Change closeups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 75%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original circle layer


Select Small Circle Left layer and repeat above steps

Select Small glittered Circle Right layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original circle layer

Select Small Glittered Circle Left layer and repeat above steps

Select Centre Frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Alien Skin Eyecandy 5 - Impact/Glass at factory default settings

Delete/Hide original frame layer

Select Centre Circle layer

Select all, float, defloat

Paste nq-paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Right layer

Select all, float, defloat

Paste nq-paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Left layer and repeat above steps

Select Glittered Circle Right layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original circle layer

Select Glittered Circle Left layer and repeat above steps

Select Element 32 - resize by 45%

Paste and position on top of Circle Left

Image, duplicate, mirror and flip

Select Rectangle Left layer

Select all, float, defloat

Paste nq-paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Right layer and repeat above steps

Select Glittered Rectangle Left layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original rectangle layer

Select Glittered Rectangle Right layer and repeat above steps

Select Hearts layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original hearts layer

Select Square 2 layer

Select all, float, defloat

Paste nq-paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer

Select all, float, defloat

Paste nq-paper 7

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 50%

Paste and position on top behind tube layer

Select Element 15 - resize by 25%

Paste and position on top right - image, free rotate right by 20%

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 80

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif