I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Friday, March 29, 2013

TATTOO CHICK





Supplies needed:

I am using the amazing art from Sarafairy for this tutorial, which you can find here

Scrapkit: I am using a matching kit from Hanna's Designs called "Gothic Sara" which you can get by going here

Mask 129 from Aqua which you can find on the Misfits Blog here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 29, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 80 and paste in the center of the canvas

Select your magic wand tool and click in the center of your original frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 1)

Copy and paste close-up tube of choice on top of gradient layer

Select invert, delete, select none

Change close-up to Hard Light

Drop opacity on close-up down to 80%

Merge tube down onto gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Paste tube of choice where desired on top of frame

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 46 - resize by 60%

Paste and position under tube layer

Select your magic wand and select the blue seat cover

Adjust, Hue and Saturation - I recolorized it with the following settings:


Select Element 47 (Corset) - resize by 50%

Image, Free Rotate Right by 15% and paste on right side below tube layer

Select Element 61 - resize by 50%

Paste and position on bottom right

Select Element 41 - resize by 40%

Paste and position on bottom right

Select Element 62 - resize by 55%

Paste and position on bottom left side

Select Element 78 - resize by 60%

Paste on bottom left side

Select Element 1 - resize by 50%

Image mirror and paste on bottom left side

Select Element 26 - paste and position in the center and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom

Apply Mask 129

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

TOXIC EASTER





Supplies needed:

I am using the amazing art from Lady Mishka for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Toxic Desirez called "Toxic Easter" which you can get by going here

Template 225 from Millie which can be found here

Mask 305 by Terese which you can find here

Plugins used: Eyecandy 4000 - Marble, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 29, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 750 x 600 (you can resize later)

Select Wordart 8 layer and move to the bottom if you desire

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 40%, Monochrome checked)

Apply Eyecandy Gradient Glow on fat default settings

Delete/Hide original wordart layer

Select Rectangle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Marble with the following settings:

Delete/Hide original rectangle layer

Select Frame 3 Element - resize by 95%

Paste and position on top of rectangle layer

Select Circle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Crumpled Paper Texture with the following settings:


Delete/Hide original circle layer

Select Frame 2 Element - resize by 97%

Paste and position on top of circle layer

Select Circle 5 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 3 layer and repeat above steps

Select Square 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Select Square 10 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Sick Bunny Element - resize by 25%

Paste and position on bottom right side

Select Egg 2 Element - resize by 22%

Paste and position on bottom right side

Select Marshmellow Element - resize by 25%

Image mirror and paste on the bottom right side

Select Cupcake Element - resize by 35%

Paste and position on bottom left side

Select Shoe Element - resize by 25%

Paste and position on bottom left side

Select Egbert Element - resize by 25%

Paste and position on bottom left side
Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 305

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, March 26, 2013

CRAZY BUNNY





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collections called "Easter Bunny" which you can get by going here

Template 228 from Millie which can be found here

Spring Mask by Sabine which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Gradient Glow, Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 26, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 750 x 600 (you can resize later)

Select Wordart 12 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Apply Eyecandy Glass at default settings

Delete/Hide original wordart layer

Select Wordart 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Gradient Glow at fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Circle 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 80%

Apply dropshadow and merge down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Circle 8 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 7 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 5 layer and repeat above steps

Select Element 136 - resize by 80%

Paste and position under top Circle 7 layer

Image, Duplicate, mirror and flip

Select Circle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 3, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original circle layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 50%

Paste and position on bottom left side

Select Element 69 - resize by 55%

Paste and position on bottom left side below element 36

Select Element 40 - resize by 50%

Paste and position on bottom left side behind element 69

Select Element 107 - image mirror and paste on right side

Select Element 71 - resize by 35%

Paste and position on bottom right side

Select Element 66 - resize by 60%

Paste and position on bottom right side below element 71

Select Element 53 - resize by 45%

Paste and position on top left side below tube layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Spring Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, March 25, 2013

SPRING RAINBOW





Supplies needed:

I am using the amazing art from Elias Chatzoudis for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Soxsational Scraps called "Spring Rainbow" which you can get by going here

Template 212 from Millie which can be found here

Mask 8 from Candy Treats which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 25, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 750 x 650 (you can resize later)

Select Wordart 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Delete/Hide original wordart layer

Select Wordart 9 back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Frame 8 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Circle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 85%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original circle layer

Select Square 6 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original square layer

Select Square 4 layer and repeat above steps

Select Circle 5 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Tulips Element - resize by 50%

Paste and position on bottom right side

Select Watering Can Element - resize by 40%

Image mirror and paste on bottom right side above tulips

Select Blanket 1 Element and paste on the bottom under tube layer

Select Drink2 Element - resize by 40%

Paste and position on bottom left side

Select Drink1 Element - resize by 40%

Paste and position on bottom left side above Drink 2 Element

Select Balloons1 Element - resize by 75%

Paste and position on top left

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 8

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, March 23, 2013

VERYLICIOUS





Supplies needed:

I am using the amazing Exclusive art from Very Many for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collections called "Verylicious" which you can get by going here

Template 417 from Missy which can be found here

Mask 191 from Insatiable Dreams which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 700 (you can resize later)

Select Star 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original star layer

Select Star 2 layer and repeat above steps

Select Rectangle layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Element 1 - resize by 35%

Paste and position on top of the rectange layer to the right

Change the opacity on the element to Hard Light

Select Rectangle Back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Frame layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Frame Background layer

Select all, float, defloat

Paste close-up tube/tubes of choice on top of background and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 80%

Apply dropshadow and merge down on top of background layer

Select Circle layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Back layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Delete/Hide original circle back layer

Select Thin Rectangle Center layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 4, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original rectangle layer

Select Center Rectangle layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Small Rectangle layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 75 - resize by 70%

Paste and position on bottom right side

Select Element 77 - resize by 45%

Paste and position on bottom right side below shoe element

Select Element 79 - resize by 45%

Paste and position on bottom left side

Select Element 9 - resize by 75%

Paste and position on bottom left side below tube layer

Select Element 45 and paste on top right side

Move element to bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 191

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, March 22, 2013

EASTER CHICK





Supplies needed:

I am using the amazing art from Alex Prihodko for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Amy Marie called "Easter Chick" which you can get by going here

Template 217 from Millie which can be found here

Mask 52 from Myth which you can find on the Misfits Blog here

Plugins used: Penta - Jeans, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 22, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 700 (you can resize later)

Select Wordart 10 layer and move where desired

Add new raster layer and flood-fill with color of choice

Reselect wordart layer

Select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 70%, Monochrome checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Circle 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 85%

Apply dropshadow and merge down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Circle 8 layer and repeat above steps without adding a close-up

Select Circle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 3, Width 5, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original circle layer

Select Circle 6 layer and repeat above steps

Select Circle 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Oval 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Daze Texture with the following settings:


Delete/Hide original oval layer

Select Square 3 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Square 2 layer and repeat above steps

Select Circel 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Jeans with the following settings:

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 61 - resize by 85%

Image, mirror and paste on the bottom left side behind tube layer

Select Element 30 - resize by 75%

Paste and position on bottom left below tube layer

Select Element 48 - resize by 40%

Paste and position on bottom right side

Select Element 15 - resize by 35%

Paste and position on bottom right side

Select Element 8 - resize by 55%

Image, mirror and paste on the bottom right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 52

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, March 20, 2013

SEXY SONDRA





Supplies needed:

I am using the amazing art from Jose Cano for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Rissa's Designs called "Sondra" which you can get by going here

Template 50 from Rissa which can be found here

Mask 111 from Designs By Vaybs which you can find here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 20, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select "Sexy" Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy 4000 Glass at default settings

Delete/Hide original wordart layer

Select Sexy Wordart back 8 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Circle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Hard Light

Drop opacity on tube down to 65%

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 8 - change colors if you desire)

Delete/Hide original circle layer

Select Rectangle 5 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 4 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide circle layer

Select Square 3 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 1 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Hummingbird Element - resize by 35%

Paste and position on top right

Select Fan Element - resize by 45%

Image, Free Rotate Right by 20%

Paste and position on bottom left side behind tube layer

Select Cupcake 1 Element - resize by 25%

Paste and position on bottom left side below tube layer

Select Lipstick Element - resize by 40%

Paste and position on bottom right side

Select Gumball Machine Element - resize by 40%

Paste and position on bottom right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 111

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, March 19, 2013

GRUNGE PRINCESS





Supplies needed:

I am using the amazing art from Anna Marine for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Irish Princess Designs called "Princess Grunge" which you can get by going here

Template 172 from Tamie which can be found here

Mask 247 from Trese which you can find here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 800 (you can resize later)

Select Circle Frame Raster 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy 4000 Glass at default settings

Delete/Hide original frame layer

Select Circle Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on tube down to 75%

Apply dropshadow and merge down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 10 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide circle layer

Select Rectangle Raster 5 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 7 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Square Raster 4 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 3 layer and repeat above steps

Select Circle Raster 6 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select GlitterMat Element

Paste and position on top of Circle Paper 3 layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Corset Element - resize by 55%

Image, Free Rotate Right by 15%

Paste and position on right side

Select Full Rose Element - resize by 45%

Image, Free Rotate Right by 15%

Paste and position on the right side above corset element

Select Purse Element - resize by 30%

Paste and position on bottom right side

Select Cupcake Element - resize by 40%

Paste and position on bottom left side

Select Lipstick Element - resize by 40%

Paste and position on bottom left side above cupcake element

Select Shoe Element - resize by 40%

Paste and position on bottom left side above lipstick element

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 247

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SUGAR GIRL





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using the matching kit from Bibi's Collections called "Sugar Girl" which you can get by going here

Template 188 from Kristin which can be found here

Mask 249 from Trese which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 700 (you can resize later)

Select Copy of Raster 1 Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Copy (2) Back Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 70%, Monochrome checked)

Delete/Hide original circle layer

Select Rectangle Raster 9 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide rectangle layer

Select Rounded Rectangle Raster 4 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square Raster 5 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Square Copy of Raster 5 layer and repeat above steps

Select Square Raster 6 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Select Square Copy of Raster 6 layer and repeat above steps

Select Square Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Crumpled Paper Texture with the following settings:


Delete/Hide original square layer

Select Square Copy of Raster 7 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 65 - resize by 80%

Paste and position on right side behind tube layer

Select Element 6 - resize by 80%

Image, Free Rotate Left by 20%

Paste and position on left side

Select Element 63 - resize by 35%

Paste and position on bottom right side

Select Element 68 - resize by 55%

Paste and position on bottom left side

Select Element 17 - resize by 50%

Paste and position on bottom left side

Select Element 30 - resize by 45%

Paste and position on top right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 249

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, March 13, 2013

PRINCESSE





Supplies needed:

I am using the amazing art from Celineart Pinup for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collections called "Princesse" which you can get by going here

Template 214 from Millie which can be found here

Mask 22 from Gina Gems and which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 13, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Square 8 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 85%

Apply dropshadow and merge close-up down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Rectangle 7 layer and repeat above steps

Select Square 5 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original square layer

Select Square 4 layer and repeat above steps

Select Circel 2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 3 layer and repeat above steps

Select Circle 1 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 35 and paste on top of circle 1 layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 70 - resize by 40%

Image, Free Rotate Left by 15%

Paste and position on top left

Select Element 22 - resize by 35%

Paste and position on bottom right side

Select Element 36 - resize by 40%

Paste and position on bottom right above cross element

Select Element 28 - resize by 55%

Paste and position on bottom right side

Select Element 34 - resize by 45%

Image, Free Rotate Left by 15%

Paste and position on bottom left side

Select Element 48 - resize by 55%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SWEET BUNNY





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collections called "Easter Bunny" which you can get by going here

Spring Template 1 from Melissa which can be found on the Misfits Blog here

Becky Mask 22 here

Spring Mask 134 from Aqua and which you can find on the Misfits Blog here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 13, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 750 x 700 (you can resize later)

Select Merged Doodles layer

Add new raster layer and flood-fill with color of choice

Reselect Doodles layer

Select all, float, defloat

Select color layer you just filled

Select invert, delete, select none

Delete/Hide original doodle layer

Select Merged Frames layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 50%, Monochrome checked)

Delete/Hide original frames layer

Select Frame Background 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 75%

Apply dropshadow and merge close-ups down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original background layer

Select Merged Strips layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original strips layer

Select Circle Frames layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Delete/Hide original frames layer

Select Raster 2 Circles layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original circles layer

Select Circle Raster 5 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 17 - Image, mirror and paste on bottom right side

Select Element 48 - resize by 45%

Paste and position on bottom right

Select Element 83 - resize by 25%

Paste and position on bottom right above element 48

Select Element 101 - resize by 30%

Paste and position on bottom left

Select Element 87 - resize by 45%

Paste and position on bottom left side

Select Element 90 - resize by 40%

Paste and position on bottom left side above element 87

Select Element 66 - resize by 55%

Image, mirror and paste/position on bottom left above element 90

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Spring Mask 134

Merge group

Select New Raster layer and flood-fill with color of choice

Move layer to the bottom of template

Apply Becky Mask 22

Merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, March 12, 2013

EASTER BLISS





Supplies needed:

I am using the amazing art from Ismael Rac for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Scrappin Krazy Designs called "Easter Bliss" which you can get by going here

Spring Template 2 from Melissa which can be found on the Misfits Blog here

Mask 250 from Trese and which you can find here

Plugins used: Eyecandy - 4000 Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 12, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 750 x 700 (you can resize later)

Select Raster Frame 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original frame layer

Select Merged Eggs layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Apply Eyecandy Glass at default settings

Delete/Hide original eggs layer

Select Frame Background 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Sunburst style, Angle 0, Repeat 3)

Paste close-up tubes of choice on top of gradient and delete

Change close-ups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 65%

Apply dropshadow and merge close-ups down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original background layer

Select Merged Strips layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original strips layer

Select Circle Frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Delete/Hide original frame layer

Select Raster 5 Circle layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original circle layer

Select Raster 3 strip layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original strip layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 18 - resize by 40%

Paste and position on bottom right side

Select Element 29 - resize by 35%

Paste and position on bottom right behind chick element

Image, Duplicate and resize by 80%

Reposition where desired

Select Element 15 - resize by 40%

Image mirror and paste on bottom left side

Select Element 28 - resize by 50%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 250

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, March 10, 2013

WILD LITTLE GOTH





Supplies needed:

I am using the amazing art from Bonnies Creations for this tutorial, which you can find here

Scrapkit: I am a gorgeous kit from Amy Marie called "Wild One" which you can get by going here

Mask 279 from Trese which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 10, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 800 x 800 blank canvas (we can resize it later)

Select Frame 5 and paste in the center of the canvas

Select your magic wand tool and click in the center of each frame (hold shift) (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 2

Paste paper 7

Select invert, delete

Paste Close-up tube on top of paper where desired and delete

Select none

Change close-up to Hard Light

Drop opacity on close-up down to 70%

Apply Dropshadow on tube and merge down on top of paper

Move paper below frame layer

Paste tube of choice where desired on top of frame

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 45%

Image Free Rotate Right by 15%

Paste and position on top right side

Select Element 26 - Image Free Rotate Right by 20%

Paste and position on right side below tube layer

Select Element 8 - resize by 70%

Paste and position on bottom right side

Select Element 37 - resize by 50%

Image mirror and paste on the bottom right above element 8

Select Element 32 - resize by 50%

Paste and position on bottom left side

Select Element 35 - resize by 45%

Paste and position on bottom left side

Select Element 67 - resize by 90%

Paste in the center of canvas and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 279

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LADY FLAVORS





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using a matching kit from Designs by Joan called "Flavors" which you can get by going here

Template 143 from Pooker which can be found here

Mask 126 from Trese and which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 10, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 800 (you can resize later)

Select White Square layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Pink Square layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original square layer

Select Black Circle 1 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Black Circle 2 layer and repeat above steps

Select White Shape 1 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original shape layer

Select White Shape 2 layer and repeat above steps

Select Lt. Pink Shape 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original shape layer

Select Lt. Pink Shape2 layer and repeat above steps

Select White Circle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Pink Circle 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 45%, Monochrome checked)

Delete/Hide original circle layer

Select Pink Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 1)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Delete/Hide original circle layer


Select Pink Circle 3 layer and repeat above steps

Select Lt. Pink Circle 1 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Lt. Pink Circle 2 layer and repeat above steps

Select Pink Strips layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original strips layer

Select Lt. Pink Boxes layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original boxes layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Flavors17 Element

Paste and position on top right side below tube layer

Select Flavors54 Element - resize by 85%

Paste and position on top right above element 17

Select Flavors10 Element - resize by 45%

Image mirror and paste on bottom left side

Select Flavors36 Element - resize by 45%

Paste and position on bottom left side

Image, mirror and reposition on right side

Select Flavors19 Element - resize by 85%

Image Free Rotate Right by 15%

Paste and position on bottom right side

Select Flavors11 Element - resize by 55%

Paste and position on bottom right side

Select Flavors18 Element - resize by 50%

Paste and position on bottom right side above element 19

Select Flavors74 Element - resize by 85%

Paste and position on top left below Black Circle 3 layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 126

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, March 9, 2013

JUST DANCE





Supplies needed:

I am using the amazing art from VeryMany for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collections called "Just Dance" which you can get by going here

Template 332 from Missy which can be found here

Mask 112 from Trese and which you can find here

Plugins used: Xero-Radiance,Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 9, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Trouble Wordart layer and delete if you desire

Select Frame 2 layer

Select your magic wand tool and select the middle of your frame (Add (Shift), RGB Value, Tolerance 20, Contiguous checked, Feather 0)

Add new raster layer and flood-fill with color of choice

Select none and merge down

Select Frame 1 layer and repeat above steps

Select Frame 1 background layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 1)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge close-up down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original frame background layer

Select Frame 2 background layer and repeat above steps

Select Rectangle Center 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Glittered Rectangle Center layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original rectangle layer

Select Circle 3 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Glittered Circle Center3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Delete/Hide original circle layer

Select Circle2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Glittered Circle Center 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Delete/Hide original circle layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select Glittered Circle Center layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Delete/Hide original circle layer

Select Glittered Circle Left layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Select Glittered Circle Right layer and repeat above steps

Select Rectangle Left layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Right and repeat above steps

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 28 - resize by 35%

Paste and position on bottom right

Select Element 70 - resize by 45%

Paste and position on bottom right above element 28

Select Element 71 - resize by 45%

Paste and position on bottom left side below tube layer

Select Element 40 - resize by 18%

Image, Free Rotate by 15%

Paste and position on bottom left

Select Element 68 - resize by 40%

Paste and position on bottom left side above element 40

Select Element 17 - resize by 80%

Paste and position on bottom and move layer down to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 112

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, March 6, 2013

HAPPY SPRING





Supplies needed:

I am using the Exclusive art from Lady Mishka for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Niqui's Designs called "Blessed Easter" which you can get by going here

Template 8 from Angie which can be found on the Misfits Blog here

Easter/Spring Mask From Sabine and which you can find on the Misfits Blog here

Plugins used: Xero-Fritillary, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 6, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 750 (you can resize later)

Select Happy Spring Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 40%, Monochrome checked)

Delete/Hide wordart layer

Select Wordart Back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Select Wordart Green Back and delete

Select Center Circle layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Center Circle Back layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 40%, Monochrome checked)

Delete/Hide original Circle Back layer

Select Bottom Right Rectangle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Overlay

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge close-up down on top of gradient layer

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Top Left Rectangle layer and repeat above steps

Select Center Square layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Apply Xero-Fritillary with the following settings:



Delete/Hide original square layer

Select Center Angled Square layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Top Right Textured Rectangle layer

Paste paper 9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Bottom Left Textured Rectangle layer and repeat above steps

Select Top Left Circle

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Select Bottom Right Circle layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 50%

Paste and position on bottom right side

Select Element 8 - resize by 20%

Paste and position on top of basket element

Select Elements 6 and 7 and repeat above step

Select your Lasso tool and make a selection around basket as shown:


Select Egg Elements and delete

Select Element 1 - resize by 35%

Paste and position on bottom left side

Select Element 26 - resize by 25%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Sabine's Mask or Mask of Choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, March 5, 2013

RABBIT TALEZ





Supplies needed:

I am using the amazing art from Danny Lee for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collections called "Sweet Emo" which you can get by going here

Template 58 from Kandi Kissez which can be found here

Easter/Spring Mask From Sabine and Easter/Spring Mask from Aqua which you can find on the Misfits Blog here

Plugins used: Alien Skin-Eyecandy 5- Impact/Glass, Eyecandy 4000 - Fur, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 5, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Black Tabs layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy - Fur with the following settings:



Delete/Hide original tabs layer

Select Kandi Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy Impact - Glass at default settings

Delete/Hide original wordart layer

Select Wordart back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select Dark Pink Circle Bottom layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Dark Pink Circle Top layer and repeat above steps

Select Bottom Black Rounded Rectangle layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Top Black Rounded Rectangle layer and repeat above steps

Select Bottom Light Pink Circle

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change close-up to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-ups down to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Delete/Hide original circle layer


Select Top Light Pink Circle layer and repeat above steps

Select Middle Black Rounded Rectangle layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Arrow Circles layer

Add new raster layer and flood-fill with color of choice

Reselect arrow circles layer

Select all, float, defloat

Select color layer you just filled

Select invert, delete, select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original arrows layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 41 - resize by 45%

Image mirror and paste on top left side

Select Element 80 - resize by 40%

Image mirror and paste on right side

Select Element 66 - resize by 45%

Paste and position on bottom right side

Select Element 55 - resize by 40%

Paste and position on bottom right side above element 80

Select Element 44 - resize by 35%

Paste and position on bottom left side below tube layer

Select Element 75 - resize by 65%

Paste and position on bottom left above element 44

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Sabine's Mask or Mask of Choice

Merge group and move to the bottom

Add new raster layer and flood-fill with color of choice

Apply Aqua's 315 Mask and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

STRIKE A POSE





Supplies needed:

I am using the amazing art from Lady Mishka for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Toxic Desirez called "Skulltastic Candy" which you can get by going here

Template 454 from Missy which can be found here

Mask 22 from Beth here

Plugins used: Alien Skin-Eyecandy 5- Impact/Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 5, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust Canvas Size by 800 x 650 (you can resize later)

Select Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy Impact - Glass at default settings

Delete/Hide original wordart layer

Select Wordart back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select Frame layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select Frame Back layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change 2 closeups to Hard Light and 2 close-ups to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-ups down to 85%

Apply dropshadow and merge close-ups down on top of gradient layer

Effects, Texture Effect, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original frame back layer

Select Square 1 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Circle 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Mosaic - Antique with the following settings:


Delete/Hide original circle laye

Select Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Rounded Edge Rect2 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rect layer

Select Rounded Edge Rect layer and repeat above steps

Select Copy of Small Circle 1 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle frame layer

Select Small Circle 1 layer and repeat steps with same paper

Select Rectangle Left layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Right Rectangle layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Ribbon Element

Image, Free Rotate Right by 25% and paste/position behind tube layer

Select Gumball Machine Element - resize by 35%

Paste and position on bottom right side

Select Skullie Bat Element - resize by 22%

Paste and position on bottom right side above gumball machine element

Select Cupcake Element - resize by 28%

Paste and position on bottom left side

Select Cotton Candy Element - resize by 32%

Image, Free Rotate Left by 25%

Paste and position on bottom left side behind cupcake element

Select Splatter Element - resize by 50%

Paste and position on bottom left side where desired and move to the bottom layer

Image, Duplicate, Mirror and Flip

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22 or Mask of Choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif