I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Saturday, November 30, 2013

TRUTH EXISTS





Supplies needed:

I am using the amazing art from Enys Guerrero for for this tutorial, which you can find here

Scrapkit: I am using a beautiful matching kit from WDDesignz "IB-EnysGuerrero-8-1" which you can get by going here

Mask 53 from Moonbeams and Spiderwebs which you can find here

Plugins used: Mura Meister - Copies, Eyecandy-Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 30, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 24 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 2

Paste paper 4

Select invert, delete,

Paste a close-up tube of choice on the top of paper where desired and delete, select none

Change close-up to Overlay

Apply Bad Dream on default settings of choice

Apply dropshadow and merge tube down on top of paper layer

Move paper/tube layer below frame

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 30%

Paste and position on top left

Select Element 14 - resize by 25%

Paste and position on bottom right

Select Element 17 - resize by 20%

Paste and position on bottom right

Select Element 19 - resize by 25%

Paste and position on bottom right

Select Element 7 - resize by 12%

Paste and position on bottom right

Select Element 12 - resize by 15%

Paste and position on bottom right

Select Element 22 - resize by 25%

Paste and position on bottom left

Select Element 13 - resize by 25%

Paste and position on bottom left

Select Element 18 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 21 - resize by 25%

Paste and position on bottom left

Select Element 12 - resize by 12%

Paste and position on bottom left

Select Element 3 - resize by 50%

Paste and position on bottom left

Select Element 1 - resize by 50%

Paste and position on bottom where desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 10 - resize by 30%

Apply Mura Meister - Copies with the following Encircle setting:

Move to the bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 53 and merge group

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BREATH OF AUTUMN





Supplies needed:

I am using the amazing art from Gaetano DiFalco for for this tutorial, which you can find here

Scrapkit: I am using a beautiful matching kit from Babycake Scraps "IB-GaetanoDiFalco-11-2" which you can get by going here

Fall Mask 12 from Dee which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 30, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 35 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 29 - resize by 85%

Paste and position on right side below tube layer

Select Element 8 - resize by 65%

Paste and position on top right

Select Element 28 - resize by 40%

Paste and position on top right

Select Element 16 - resize by 65%

Paste and position on top left

Select Element 23 - resize by 50%

Paste and position on bottom right

Select Element 11 - resize by 55%

Paste and position on bottom right

Select Element 10 - resize by 30%

Paste and position on bottom right

Select Element 30 - resize by 50%

Paste and position on bottom left

Select Element 31 - resize by 40%

Paste and position on bottom left

Select Element 2 - resize by 55%

Paste and position on bottom left

Select Element 27 - resize by 90%

Paste and position on bottom where desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 12 - resize by 55%

Paste and position on right side

Select Element 36 - resize by 30%

Paste and position on right side

Select Element 15 - resize by 55%

Paste and position on top left

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 12 and merge group

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, November 29, 2013

ANGEL OF DEATH




Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial, which you can find here

Scrapkit: I am using a wicked kit from AmyMarie called "Angel of Death" which you can get by going here

GrungeMask from Boundless Bliss which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 29, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 90%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste a close-up tube of choice on the top of paper where desired and delete, select none

Change close-up to Luminance (Legacy)

Drop opacity on tube down to 35%

Apply Bad Dream on default settings of choice

Apply dropshadow and merge tube down on top of paper layer

Move paper/tube layer below frame

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Coffin Element and paste on bottom right side below tube layer

Select Jar Element - resize by 45%

Paste and position on bottom right

Select Bottle Element - resize by 30%

Paste and position on bottom right

Select Bottle 3 Element - resize by 30%

Paste and position on bottom right

Select Book Element - resize by 30%

Paste and position on bottom right

Select Rosepetals1 Element - resize by 25%

Paste and position on bottom right

Select Spiderweb Element - resize by 50%

Paste and position on bottom right

Select Cat Element - resize by 30%

Paste and position on bottom right

Select Candle4 Element - resize by 50%

Paste and position on bottom left side

Select Clock Element - resize by 40%

Paste and position on bottom left

Select Rose2 Element - resize by 20%

Paste and position on bottom left

Select Deadtree1 Element - resize by 80%

Image mirror and paste on left side and move below frame layer

Select Moon Element - resize by 40%

Paste and position on top left below tree layer

Select Vampteeth Element - resize by 40%

Image Free Rotate Left by 15% and paste on right side

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Grunge Mask and merge group

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

STEAMERED





Supplies needed:

Scrapkit: I am using an awesome kit from Mistylynn's Creations called "Steamered" which you can get by going here

Heart Mask 2 from Babs Bitzy Designs which you can find here

Masl 291 from Trese which you can find here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 29, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 13 and paste in the center of the canvas

Resize by 85%

Select your Freehand Selections tool and Select the aread around the Frame (Add (Shift), Feather 0, Smoothing 4, Anti-alias checked)

Selections, Modify, Expand by 3

Paste paper 7

Select invert, delete, select none

Move paper layer below frame

Paste Tube Element 19 and paste where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 8 - resize by 35%

Paste and position on top right

Selecct Element 6 - resize by 25%

Paste and position on top right

Select Element 14 - resize by 40%

Paste and position on top right

Select Element 48 - resize by 30%

Image Free Rotate Left by 15% and paste on top left

Select Element 26 - resize by 40%

Paste and position on bottom right

Select Element 52 - resize by 25%

Paste and position on bottom right

Select Element 29 - resize by 30%

Paste and position on bottom right

Select Element 11 - resize by 20%

Paste and position on bottom right

Select Element 23 - resize by 25%

Paste and position on bottom right

Select Element 50 - resize by 35%

Image mirror and paste on left side

Add new raster layer and flood-fill with color of choice

Apply Mask 291 and merge group

Move to bottom layer

Add new raster layer and flood-fill with color of choice

Apply Heart Mask 2 and merge group

Move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Thursday, November 28, 2013

VAMPRIESS




Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Vampire" which you can get by going here

Template 438 by Millie which can be found here

Mask 180 from Insatiable Dreams which you can find here

Plugins used: Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 28, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Square 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Drop opacity down to 75% on tubes

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 10, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Square 7 layer and repeat above steps

Select Square 5 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/hide original square layer

Select Element 117 - resize by 80%

Paste and position on top of square 5 where desired

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 3 layer and repeat above steps

Select Square 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Texture with the following Plant Leave texure settings:



Delete/Hide original square layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 38 and paste on top of circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 126 - resize by 35%

Paste and position on the center of template where desired

Select Element 99 - resize by 65%

Paste and position on right side

Select Element 121 - resize by 75%

Paste and position on the bottom center below tube layer

Select Element 132 - resize by 25%

Paste and position on bottom right

Select Element 6 - resize by 20%

Paste and position on bottom right

Select Element 10 and paste on bottom right

Select Element 107 - resize by 30%

Paste and position on bottom left

Select Element 28 - resize by 50%

Paste and position on bottom left

Select Element 115 - resize by 30%

Paste and position on bottom left

Select Element 34 - resize by 20%

Paste and position on botton left

Select Element 83 - resize by 45%

Paste and position on bottom left

Select Element 128 - resize by 25%

Paste and position on bottom left

Select Element 61 - resize by 45%

Paste and position on top right

Select Element 46 - resize by 45%

Paste and position on top left

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 180

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

GOBBLE GOBBLE





Supplies needed:

I am using the amazing artwork from Charles Bristow for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Scrappin Krazy Designs called "Gobble Gobble" which you can get by going here

Mask 260 by Vix which can be found here

Mask 117 by Weescottslass which can be found here

Template from Dee which you can find here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 28, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Pixel words and apply Eyecandy Graident Glow on medium default settings (Glow Width 3)

Select "Gravy" Wordart layer

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient glow on fat default settings (Glow Width 3)

Select "the next best thing" Wordart layer

Apply same Gradient Glow

Select Blue Inside Frames layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 0, Repeat 2)

Select none

Effect, Texture Effects, Blinds (Width 2, Opacity 25, Horizontal and Light from left/top checked)

Delete/Hide original frames layer

Select Rust Strip layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original strip layer

Select Brown Scalloped Shape layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original scalloped layer

Select Small Blue Square layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Drop opacity down to 75% on tube

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Creme Circle layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Brown Strip layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original strip layer

Select Rust Circle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Creme Strip layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original strip layer

Select Blue Rectanlge layer

Select all, float, defloat

Paste paper 9

Select all, float, defloat

Select none

Delete/Hide original rectangle layer

Select Brown Square layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original square layer

Select Creme Square layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 41 - resize by 85%

Paste and position on right side where desired

Select Element 50 - resize by 55%

Paste and position on top right

Select Element 13 - resize by 30%

Paste and position on bottom right below wordart

Select Element 29 - resize by 35%

Image mirror and paste on bottom right

Image Free Rotate Right by 10%

Select Element 27 - resize by 30%

Paste and position on bottom right

Select Element 30 - resize by 45%

Paste and position on bottom

Select Element 42 - resize by 45%

Image Free Rotate Right by 10% and paste on bottom

Select Element 37 - resize by 35%

Image mirror and paste on bottom left

Select Element 51 - resize by 40%

Paste and position on bottom left

Select Element 35 - resize by 20%

Paste and position on bottom left

Select Element 36 - resize by 16%

Paste and position on bottom left

Select Element 3 - resize by 25%

Paste and position on top right

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 117

Merge group and move to the bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 260

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, November 27, 2013

SANTA'S HELPER





Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Bibi's Collections called "Xmas Mess" which you can get by going here

Masks 35 & 90 by Trese which can be found here

Template 43 from Cakes which you can find here

Plugins used: Xero - Fritillary, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 27, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart 1 layer

Select your selections tool and select "favorite helper" wording

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings and merge down

Select Half Circle 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 0, Repeat 2)

Select none

Apply Xero- Fritillary with the following settings:

Delete/Hide original circle layer

Select Red Circle 5 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/hide original circle layer

Select Square 6 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangles 7 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangles layer

Select Circle 8 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 9 layer and repeat above steps

Select Rectangle 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 4, Opacity 5, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/Hide original rectangle layer

Select Rectangle 11 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 12 layer and repeat above steps

Select Rectangle 13 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 14 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square 15 layer and repeat above steps

Select Circle 16 layer

Select all, float, defloat

Paste paper 8

Select all, float, defloat

Select none

Delete/Hide original circle layer

Select Element 46 - resize by 45%

Paste and position on left side above template

Select Element 36 - resize by 55%

Paste and position on top of template

Select Element 52 - resize by 40%

Paste and position on top of Element 36

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 33 - resize by 65%

Paste and position on right side

Select Element 50 - resize by 45%

Paste and position on bottom right

Select Element 1 - resize by 35%

Paste and position on bottom right

Select Element 6 - resize by 35%

Paste and position on bottom right

Select Element 34 - resize by 40%

Paste and position on bottom left

Select Element 51 - resize by 45%

Paste and position on bottom left

Select Element 18 - resize by 45%

Paste and position on bottom left

Select Element 53 - resize by 30%

Paste and position on bottom left

Select Element 24 - resize by 35%

Paste and position on bottom left

Select Element 39 - resize by 60%

Paste and position on bottom left

Select Element 44 - resize by 25%

Paste and position on bottom left

Select Element 59 - resize by 40%

Paste and position on top left

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 90

Merge group and move to the bottom

Add new raster layer and flood-fill with color of choice

Apply Mask 35

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, November 25, 2013

FAIRY FANTASY





Supplies needed:

I am using the amazing artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Bibi's Collections called "Fairy Fantasy" which you can get by going here

Template by Adele which can be found on the Creative Addictions Blog here

Mask 16 from Gina Gems which you can find here

Plugins used: Penta - Color dots, Eyecandy 4000 - Marble, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 25, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust/resize canvas 750 x 650

Select Copy of Raster 2 layer

Select all, float defloat

Add new raster layer and flood-fill with color of choice

Paste and position Element 12 on top of layer where desired

Select invert, delete, select none

Delete/Hide original shape layer

Select Raster 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original shape layer

Select Raster 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Apply Penta - colordots with the following settings:

Delete/Hide original shape layer

Select Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Raster 5 Strip layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy - Marble with the following settings:

Delete/Hide original strip layer

Select Copy (3) of Raster 4 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/hide original rectangle layer

Select Copy (2) Raster 4 layer and repeat above steps

Select Raster 4 Rectangle layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Copy of Raster 4 Rectangle layer and repeat above steps

Select Raster 3 Rectangle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Copy of Raster 3 Rectangle layer and repeat above steps

Select Raster 6 Strip layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original strip layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 30%

Paste and position on bottom right side

Select Element 58 - resize by 35%

Paste and position on bottom right side

Select Element 26 - resize by 30%

Image mirror and paste on bottom right

Select Element 13 - resize by 88%

Paste and position on left side

Select Element 35 - resize by 40%

Paste and position on bottom left

Select Element 22 - resize by 20%

Image mirror and paste on bottom left

Select Element 28 - resize by 25%

Paste and position on bottom left

Select Element 62 - resize by 25%

Paste and position on bottom left

Select Element 29 - resize by 30%

Paste and position on bottom left

Select Element 2 - resize by 45%

Paste and position on bottom left

Select Element 18 - resize by 50%

Paste and position on top right

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 16

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, November 23, 2013

WITCHCRAFT





Supplies needed:

I am using the amazing art from Tiffany Toland Scott for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "WitchCraft" which you can get by going here

Mask 96 from Trese which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Doorway Element and paste in the center of the canvas

Resize by 55%

Select your Select tool and select the area around the empty door Frame (Selection type - rectangle, (Add (Shift) Feather 0, Anti-alias checked)

Paste paper 4

Select invert, delete, select none

Move paper layer below frame

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Tree3 Element - resize by 85%

Paste and position on left side and move to bottom layer

Select Moon Element - resize by 30%

Paste and position on top left and move to bottom layer

Colorize with the following settings if you desire:

Select Grass Element - resize by 50%

Paste and position on bottom right

Select Broom Element - resize by 65%

Paste and position on right side

Select AgateStones Element - resize by 35%

Paste and position on bottom left

Select Leaves2 Element - resize by 15%

Paste and position on bottom left

Select Cauldron Element - resize by 35%

Paste and position on bottom left

Select Pumpkins Element - resize by 35%

Paste and position on bottom left

Select Razor Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Candle1 Element - resize by 25%

Paste and position on bottom left

Select Calice Element - resize by 20%

Paste and position on bottom left (remember to sharpen element)

Select Potion Element - resize by 15%

Paste and position on bottom left

Select SandsOfTime Element - resize by 25%

Paste and position on bottom left

Select DriedFloral Element - resize by 15%

Paste and position on bottom left

Select Feather Element - resize by 20%

Paste and position on bottom left

Select Book1 Element - resize by 20%

Paste and position on bottom

Select Raven2 Element - resize by 25%

Paste and position on top left

Select Wordart2 Element - resize by 45%

Paste and position on left side

Apply Eyecandy Gradient Glow on fat default settings

Select Mesh Element - resize by 70%

Paste on canvas and move to the bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 96 and merge group

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

AUTUMN SUNSET





Supplies needed:

I am using the amazing artwork from Renee Biertempfel for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from HorsePlay's Pasture Designs called "Autumn Sunset" which you can get by going here

Harvest Template by Dee which can be found here

Mask 1 from Rieka Rafita which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart White layer

Apply Eyecandy Gradient Glow on fat default settings

Select Green Squares layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Drop opacity down to 75% on tubes

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 10, Horizontal and Light from left/top checked)

Delete/Hide original sqaures layer

Select White Squares layer layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Small Yellow Circle layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/hide original circle layer

Select White oval frame layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Orange Oval layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original oval layer

Select Left Red Square layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original square layer

Select Green Square layer and repeat above steps

Select Top Yellow Circle layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Right Large Yellow Circle layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original circle layer

Select Top Red Square layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original square layer

Select Yellow Square layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Bottom Red Square layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 55 and paste on right side where desired below tube layer

Select Element 74 - resize by 50%

Paste and position on bottom right

Select Element 68 - resize by 45%

Paste and position on bottom right

Select Element 15 - resize by 40%

Paste and position on bottom left side

Select Element 23 - resize by 55%

Paste and position on bottom left side

Select Element 45 - resize by 45%

Image mirror and paste on bottom left

Select Element 22 - resize by 45%

Paste and position on bottom left

Select Element 67 - resize by 30%

Paste and position on bottom left

Select Element 17 - resize by 25%

Paste and position on bottom left

Select Element 18 - resize by 35%

Paste and position on top left

Select Element 35 - resize by 45%

Paste and position on top left

Select Element 53 - resize by 30%

Paste and position on top right

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 1

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, November 11, 2013

WITCHES DEN





Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial, which you can find here

Scrapkit: I am using a stunning FTU kit from Vaybs Designs called "The Witches Den" which you can get by going here

Mask 249 from Trese which you can find here

Plugins used: Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 11, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 and paste in the center of the canvas

Select your magic wand tool and click in each of the center square of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete

Paste a close-up tube of choice on the top of paper on the right side where desired and delete, select none

Change close-up to screen

Drop opacity on tube down to 85%

Apply dropshadow and merge tube down on top of paper layer

Move paper/tube layer below frame

Select Element 80 - resize by 80%

Paste and position on bottom center of frame

Select Element 57 - resize by 45%

Paste and position on top left

Effects, Texture Effects, Emboss

Select Element 75 - resize by 45%

Image Free Rotate Left by 20% and paste on top left

Select Element 34 - resize by 55%

Paste and position on top right below frame layer

Colorize with the following settings if desired:

Select Element 77 and paste on top right

Select Element 39 - resize by 75%

Paste and position on top right below frame layer

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 55%

Paste and position on bottom left

Select Element 33 - resize by 40%

Paste and position on left side

Select Element 76 - resize by 40%

Paste and position on bottom left

Select Element 38 - resize by 55%

Paste and position on bottom left

Select Element 3 - resize by 45%

Paste and position on bottom left

Select Element 20 - resize by 55%

Paste and position on bottom right

Select Element 65 - resize by 55%

Paste and position on bottom right

Select Element 37 - resize by 55%

Paste and position on bottom right

Select Element 81 - resize by 80%

Paste and position on bottom right

Select Element 12 - resize by 65%

Paste and position on top right

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 249 and merge group

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, November 8, 2013

BEYOND DARKNESS





Supplies needed:

I am using the amazing art from Shining Star Art for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Scrappin Krazy Designs called "Raven" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins used: Xero-Radiance, Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 8, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 12 and paste in the center of the canvas

Select your magic wand tool and click in each of the center of the left square (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper layer below frame

Select your magic wand tool and click in each of the center of the top and bottom right squares (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 16

Select invert, delete, select none

Move paper layer below frame

Select Element 60 - resize by 65%

Paste and position on bottom of frame

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 50%

Paste and position on top right

Recolor with the following settings if desired:

Select Element 25 - resize by 85%

Paste and position on right side

Select Element 40 and paste on top where desired

Select Element 41 - resize by 60%

Paste and position on bottom right

Select Element 19 - resize by 45%

Paste and position on bottom right

Select Element 47 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 43 - resize by 35%

Image mirror and paste on bottom right

Select Element 36 - resize by 30%

Paste and position on bottom right

Select Element 3 - resize by 40%

Image mirror and paste on bottom left

Select Element 28 - resize by 15%

Paste and position on bottom left

Select Element 33 - resize by 40%

Paste and position on top left

Select Element 30 - resize by 50%

Paste and position on top left

Apply Eyecandy Gradient Glow on fat default settings

Select Element 35 and paste in the center of canvas

Move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 20 and merge group

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif