I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo SCDblnk_byangelsdesignz.gif
 photo PPPBlinkie2_zps90ae120a.gif
 photo KKfan_byevolangel_zpsyiycjybi.gif

Blog Archive

Facebook

Wednesday, April 30, 2014

KATRINA






Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Katrina" which you can get by going here

Template 210 from Pooker which you can find here

Mask 53 from Moonbeams and Spiderwebs which you can find here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Green Circle layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original circle layer

Select White Circle layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select Blue Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Red Circle layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original circle layer

Select 2 Black Circles1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 80%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circles layer

Select 2 Blue Circles layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original circles layer

Select 2 White Circles layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original circles layer

Select 2 Green Circles layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circles layer

Select 2 White Circles 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circles layer

Select 2 Red Circles layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original circles layer

Select Blue Circle 2 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 33 - resize by 55%

Image mirror and paste on top of the center circle

Select Element 65 - resize by 35%

Paste and position on top left

Image duplicate, mirror and reposition on bottom right

Select Element 123 - resize by 30%

Paste and position on bottom right

Select Element 95 - resize by 15%

Paste and position on bottom right

Select Element 46 - resize by 25%

Paste and position on bottom right

Select Element 75 - resize by 20%

Paste and position on bottom right

Select Element 129 - resize by 40%

Paste and position on bottom right

Select Element 113 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 32 - resize by 25%

Paste and position on bottom left

Select Element 89 - resize by 30%

Paste and position on bottom left

Select Element 120 - resize by 25%

Paste and position on bottom left

Select Element 72 - resize by 9%

Paste and position on bottom left

Select Element 56 - resize by 45%

Image flip and postion on left side where desired and move to bottom layer

Image duplicate, mirror and reposition where desired

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 53

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, April 29, 2014

NAUGHTY ANGEL





Supplies needed:

I am using the amazing artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Pink Paradox Productions called "Fallen Angel" which you can get by going here

Template 233 from Millie which you can find here

Mask 179 from Insatiable Dreams which you can find here

Plugins used: Alien Skin Xenofex 2 - Constellation, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 775 x 550

Select Star 20 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original star layer

Select Star 19 layer and repeat above steps

Select Wordart 18 layer

Apply Eyecandy Gradient Glow on fat default settings

Select Wordart 17 layer and repeat above step

Select Circle 16 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Circle 15 layer and repeat above steps

Select Circle 14 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Circle 13 layer and repeat above step

Select Circle 12 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Circle 11 layer and repeat above steps

Select Rectangle 10 layer

Select all, float, defloat

Paste paper 25

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 9 layer and repeat above steps

Select Rectangle 8 layer

Select all, float, defloat

Paste paper 36

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 28

Select invert, delete, select none

Delete/Hide orignal rectangle layer

Select Square 6 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original square layer

Select Square 5 layer and repeat above steps

Select Square 4 layer

Apply Effects, Texture effects, weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, Change Gap Color to color of choice)

Select Square 3 layer and repeat above step

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 19

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 1 layer

Select all, float, defloat

Paste paper 33

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 117 - resize by 50%

Paste and position on top where desired

Apply Xenofex - Constellation with the following settings (optional):

Select Element 12 - resize by 25%

Image Free Rotate Right by 15% and paste on top right

Select Element 18 - resize by 25%

Paste and position on bottom right

Select Element 26 - resize by 25%

Paste and position on bottom right

Select Element 21 - resize by 18%

Paste and position on bottom right

Select Element 29 - resize by 15%

Paste and position on bototm right

Select Element 14 - resize by 25%

Paste and position on bottom where desired

Select Element 25 - resize by 20%

Paste and position on bottom left

Select Element 99 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 22 - resize by 15%

Paste and position on bottom left

Select Element 2 - resize by 25%

Paste and position on bottom left

Select Element 39 - resize by 20%

Paste and position on bottom left

Select Element 147 - resize by 20%

Paste and position on bottom left

Select Element 55 - resize by 15%

Paste and position on bottom left

Select Element 64 - resize by 25%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 179

Merge group and move to the bottom layer

Apply Cybia Screenworks - Chainlink on the following settings:

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, April 28, 2014

CAMO CAKES





Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Camo Cakes" which you can get by going here

Template 10 from Scrapity Scrap which you can find here

Mask 133 from Weescotlass which you can find here

Plugins used: Cybia - Screenworks, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 700 x 550

Select Frame Copy of Vector 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select remaining frames and repeat above steps

Select Rectangle Raster 6 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square Raster 5 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangle Raster 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Circle Raster 2 layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 58 - resize by 50%

Paste and position on bottom right

Select Element 25 - resize by 50%

Image mirror and paste on bottom right

Select Element 49 - resize by 45%

Paste and position on bottom right

Select Element 50 - resize by 35%

Pasate and position on bottom right

Select Element 7 - resize by 25%

Image mirror and paste on bottom right

Select Element 46 - resize by 25%

Paste and position on bottom right

Select Element 31 - resize by 45%

Paste and position on bototm right

Select Element 96 - resize by 25%

Paste and postion on bottom

Select Element 74 - resize by 20%

Paste and position on bottom

Select Element 76 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom

Select Element 55 - resize by 50%

Paste and position on bottom left

Select Element 59 - resize by 25%

Paste and positon on bottom left

Select Element 23 - resize by 50%

Paste and position on bottom left

Select Element 26 - resize by 45%

Paste and position on bottom left

Select Element 16 - resize by 25%

Paste and position on bottom left

Select Element 48 - resize by 45%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 4 - resize by 35%

Image Free Rotate Right by 15% and paste on right side

Select Element 85 - resize by 90%

Paste and position in the center of canvas and move to bottom layer

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 133

Merge group and move to the bottom layer

Apply Cybia Screenworks - Chainlink on the following settings:

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, April 27, 2014

SPRING ON MY MIND





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Designs by Joan called "Spring" which you can get by going here

Spring Template 3 from Millie which you can find here

Mask 30 from Millie which you can find here

Plugins used: Eyecandy 4000 - Marble, Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero - Radiance, VM Extravaganza - Transmission, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 27, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 750 x 550

Select Dotted Circle 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original dotted circle

Select Circle 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 85%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Wordart 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings of choice

Apply Eyecandy Gradient Glow on fat default setting (Glow Width 3)

Delete/Hide original wordart layer

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 6 layer

Apply Eyecandy Marble with the following settings:

Select Circle 5 layer and repeat above step

Select Square 4 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original square layer

Select Square 3 layer and repeat above steps

Select Circle 2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Strip 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply VM Transmission with the following settings:

Delete/Hide original strip layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 18 - resize by 70%

Paste and position on top right where desired

Select Element 54 - resize by 40%

Paste and position on right side below tube layer

Image duplicate and mirror

Select Element 56 - resize by 20%

Paste and position on bottom right

Select Element 63 - resize by 40%

Paste and position on bottom right

Select Element 37 - resize by 20%

Paste and position on bottom right

Select Element 28 - resize by 30%

Paste and position on bottom right

Select Element 55 - resize by 25%

Paste and position on top left

Select Element 42 - resize by 30%

Paste and position on bottom left

Select Element 69 - resize by 40%

Paste and position on bottom left

Select Element 67 - resize by 35%

Paste and position on bottom left

Select Element 29 - resize by 30%

Paste and position on bottom left

Select Element 13 - resize by 20%

Image mirror and paste on bottom left

Select Element 70 - resize by 22%

Paste and position on bottom left

Select Element 71 - resize by 35%

Image Rotate Left by 15% and paste on top left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 30

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, April 24, 2014

CANDYLAND FAIRY





Supplies needed:

I am using the amazing bonus tube from Enys Guerrero for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Candyland Fairy" which you can get by going here

Mask 126 from Trese which you can find here

Plugins: Xero- Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 24, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Resize by 70%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 8

Paste paper 21

Select invert, delete, select none

Move paper below the frame

Select Element 84 - resize by 35%

Paste and position on right side

Paste tube of choice where desired

Apply Xero Bad Dream with the following settings:

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 25%

Paste and position on top right

Select Element 124 - resize by 20%

Paste and position on right side

Select Element 48 - resize by 22%

Paste and position on bottom right

Select Element 49 - resize by 25%

Paste and position on bottom right

Select Element 13 - resize by 15%

Paste and position on bottom right

Select Element 113 - resize by 50%

Paste and position on bottom right

Select Element 21 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 12 - resize by 40%

Paste and position on bottom right

Select Element 31 - resize by 25%

Image Free Rotate Right by 5% and paste on bottom right

Select Element 2 - resize by 45%

Paste and position on bottom

Select Element 43 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom

Select Element 114 - resize by 20%

Paste and position on bottom left

Select Element 118 - resize by 12%

Paste and position on bottom left

Select Element 19 - resize by 15%

Paste and position on bottom left

Select Element 37 - resize by 25%

Image Free Rotate by 15% and paste on bottom left

Select Element 20 - resize by 15%

Paste and position on bottom left

Select Element 65 - resize by 20%

Paste and position on top left

Select Element 71 - resize by 85%

Paste and position in the center of canvas and move to bottom layer

Apply Eyecandy Gradient Glow on fat default settings

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 126 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SKULL BABE





Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Lizquis Scraps called "Skull Bebe" which you can get by going here

Template 3 from Chas which you can find here

Mask 112 from Trese which you can find here

Plugins used: Eyecandy 4000 - Marble, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 750 x 700

Select Half Moon Raster 12 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original layer

Select Half Moon Raster 10 layer and repeat above steps

Select Circle Raster 11 layer

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Frame 3 Element - resize by 65%

Paste and position on top of circle layer

Select Rectangle frame Raster 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select Rectangle Raster 8 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 5 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Raster 4 layer and repeat above steps

Select Strip Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 0, Repeat 4)

Select none

Delete/Hide original strip layer

Select Square Raster 1 layer

Apply Eyecandy Marble with the following settings:

Select Rectangle Raster 2 layer and repeat above step

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Cross 1 Element - resize by 40%

Paste and position on top right

Select Bag Element - resize by 50%

Paste and position on bottom right

Select Letter Element - resize by 30%

Image Free Rotate Left by 15% and paste on bottom right

Select Drink Element - resize by 35%

Paste and position on bottom right

Select Rose Element - resize by 25%

Paste and position on bottom right

Select Ring Candy Element - resize by 20%

Image mirror and paste on bottom right

Select Cranial Heart Element - resize by 40%

Image mirror, Free Rotate Left by 15% and paste on bottom left

Select Cassette Player Element - resize by 45%

Paste and position on bottom left

Select Knuckles Element - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Shoe Element - resize by 35%

Paste and position on bottom left

Select Bear Element - resize by 35%

Paste and position on bottom left

Select Potion Element - resize by 35%

Paste and position on bottom left

Select Ice Cream Element - resize by 40%

Paste and position on bottom

Select Branch Element - resize by 45%

Paste and position on top left

Select Butterfly Element - resize by 30%

Image Free Rotate Left by 15% and paste on top left

Select Netting Element - resize by 55%

Paste and position on top left and move to bottom layer

Image duplicate, mirror, flip and reposition where desired

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 112

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, April 22, 2014

DEPLOYMENT





Supplies needed:

I am using the amazing artwork from Michael Landefeld for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Horseplay's Pasture Desigsn called "Deployment" which you can get by going here

Template 30 from Scrapity Scrap and More which you can find here

Mask 53 from Moonbeam and Spiderwebs which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 750 x 600

Select Stars Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original stars layer

Select Border Copy of Vector 5

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Half Circle Raster 6 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original half circle layer

Select Copy of Vector 1 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Strip Raster 5 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original strip layer

Select Copy of Vector 2 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Strip Raster 4 layer and repeat same steps for Raster 5

Select Copy of Vector 4 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 2 layer

Select all, float, defloat

Paste paper 17

Select invert, delete, select none

Delete/Hide original circle layer

Select Frame Element 19 - resize by 88%

Paste and position on top of circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 12 - resize by 50%

Paste and position on bottom right

Select Element 22 - resize by 35%

Paste and position on bottom right

Select Element 26 - resize by 40%

Image Free Rotate Left by 5% and paste on bottom right

Select Element 13 - resize by 30%

Paste and position on bottom where desired

Select Element 14 - resize by 35%

Paste and position on bottom where desired

Select Element 4 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom

Select Element 23 - resize by 50%

Paste and position on bottom

Select Element 15 - resize by 35%

Paste and postion on bottom left

Select Element 46 - resize by 40%

Paste and position on bottom left

Select Element 55 - resize by 80%

Paste and position on left side

Select Element 13 - resize by 45%

Paste and position on top left

Seelct Element 17 - resize by 40%

Image mirror and paste on top left

Select Element 25 - resize by 75%

Paste and position on bottom where desired

Apply Eyecandy Gradient Glow on Medium default settings

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 53

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

s
Saturday, April 19, 2014

TOXIC PUNK





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Bio-Hazard" which you can get by going here

Toxic Template from Sandra which you can find here

Mask 36 from Millie which you can find here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 700 x 550

Select Words layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Large Circle layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original circle layer

Select Rounded Rectangle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 85%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/hide original rectangle layer

Select Rounded Rectangle 1 layer and repeat above steps

Select Sqaure 2 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Select Small Circle 2 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Small Circle 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 14 - resize by 80%

Paste and position on left side below tube layer

Select Element 8 - resize by 35%

Paste and position on bottom left

Select Element 58 - resize by 25%

Image mirror and paste on left side - image free rotate left by 5%

Select Element 39 - resize by 25%

Paste and position on bottom left

Select Element 92 - resize by 20%

Paste and position on bottom left

Select Element 75 - resize by 12%

Paste and position on bottom left

Select Element 33 - resize by 30%

Paste and position on top right

Select Element 23 - resize by 60%

Paste and position on top right

Select Element 53 - resize by 25%

Paste and position on top right

Select Element 44 - resize by 25%

Paste and positio on bottom right

Select Element 25 - resize by 40%

Paste and position on bottom right

Select Element 21 - resize by 25%

Paste and position on top left

Select Element 10 - resize by 55%

Paste and position on top left and move to bottom layer

Image duplicate, mirror and flip (reposition where desired)

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 36

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BEWARE THE WOLF





Supplies needed:

I am using the amazing art from Elias Chatzoudis for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Beware the Wolf" which you can get by going here

Mask 39 from Millie which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 19, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 16 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center on both sides of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 18

Select invert, delete, select none

Move paper below the frame

Select Frame Element 6 - resize by 25%

Image Free Rotate Left by 15% and paste on top right where desired

Image duplicate, mirror and repositon copy on bottom right

Select your magic wand tool and click in the center of the top Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 85%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Move gradient/tube layer below frame

Select the copy of frame and repeat above steps

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 93 - paste and positon on bottom where desired

Select Element 105 - resize by 35%

Paste and position on top left

Select Element 95 - resize by 35%

Paste and position on bottom left

Select Element 9 - resize by 45%

Paste and position on left side behide tube layer

Select Element 37 - resize by 20%

Paste and position on bottom left

Select Element 13 - resize by 22%

Paste and position on bottom left

Select Element 47 - resize by 15%

Paste and position on bottom left

Select Element 18 - resize by 15%

Paste and position on bottom left

Select Element 23 - resize by 15%

Paste and position on bottom left

Select Element 49 - resize by 20%

Paste and position on bottom left

Select Element 26 - resize by 22%

Paste and position on bottom right

Select Element 5 - resize by 25%

Paste and position on bottom right

Select Element 50 - resize by 25%

Paste and position on bottom right

Select Element 21 - resize by 20%

Paste and paste on bottom right

Select Element 42 - resize by 20%

Paste and position on bottom right

Select Element 19 - resize by 23%

Paste and position on top right

Select Element 144 - resize by 45%

Paste and position on top where desired

Apply Eyecandy Gradient Glow on fat default settings

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 39 and merge group and move to bottom layer

Resize by 110%

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Thursday, April 17, 2014

DESPERADO





Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "West Babe" which you can get by going here

Template from Stylelicious Twinky which you can find here

Mask 249 from Trese which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 700 x 550

Select Wordart Raster 9 layer

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Square Raster 7

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/hide original square layer

Select Square Raster 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 6 layer and repeat above steps

Select Circle Raster 4 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Raster 3 layer and repeat above steps

Select Square Raster 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 1 layer and repeat above steps

Select Oval Raster 8 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original oval layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 91 - resize by 75%

Paste and position on bottom where desired

Select Element 88 - resize by 30%

Paste and position on top left

Select Element 80 - resize by 45%

Paste and position on bottom left

Select Element 50 - resize by 25%

Paste and position on bottom left

Select Element 5 - resize by 50%

Image mirror and paste on bottom left

Select Element 72 - resize by 25%

Paste and position on bottom left

Select Element 98 - resize by 30%

Paste and position on bottom left

Select Element 71 - resize by 28%

Image mirror and paste on bottom right

Select Element 16 - resize by 28%

Paste and position on right side

Select Element 82 - resize by 20%

Paste and position on bottom right

Select Element 101 - resize by 75%

Image mirror and paste on right side

Select Element 102 - resize by 40%

Paste and position on bottom right

Select Element 13 - resize by 25%

Paste and position on bottom right

Select Element 38 - resize by 35%

Paste and position on bottom

Select Element 15 - resize by 22%

Paste and position on top right

Select Element 51 - resize by 40%

Image Free Rotate Right by 15% and paste on top right

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 249

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

HAPPY EASTER





Supplies needed:

I am using the amazing artwork from Pinup Toons for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Icy Blue Mystic Designs called "Easter Morning" which you can get by going here

Template 177 from Punky Butts which you can find here

Easter Mask from Aqua which you can find on the Misfits Blog here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 750 x 650

Select Right Frame Rec layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original frame layer

Select Center and Left Frames and repeat above steps

Select Right Rec layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/hide original rect layer

Select Left Rec layer and repeat above steps

Select Center Rec layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rec layer

Select Center Outer Circle layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Left and Right Ourter Circles and repeat above steps

Select Dots Circle Center layer

Add new raster layer and flood-fill with color of choice

Reselect Dots Circle - select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Delete/Hide original dots circle layer

Select remaining dots circle layers and repeat above steps

Select Center Innter Circle layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original Circle layer

Select Center Scallop layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Scallop Left and Right layers and repeat above steps

Select Right Inner Circle layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Left Inner Circle layer and repeat above steps

Select Element 89 - paste and position on bottom where desired

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 21 - resize by 85%

Paste and position towards the right side behind tube layer

Select Element 20 - resize by 40%

Paste and position on bottom left behind tube layer

Select Element 44 - resize by 40%

Paste and position on bottom left below tube layer

Select Element 75 - resize by 25%

Paste and position on bottom left

Select Element 72 - resize by 35%

Paste and position on bottom left

Select Element 53 - resize by 30%

Paste and position on bottom right - image duplicate and mirror

Select Element 46 - resize by 30%

Image mirror and paste on bottom right

Select Element 58 - resize by 15%

Paste and position on bottom right

Select Element 33 - resize by 25%

Paste and position on bottom right

Select Element 3 - resize by 30%

Paste and position on bottom right

Select Element 50 - resize by 30%

Image Free Rotate Left by 15% and paste on top left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Easter Mask

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, April 15, 2014

STEAMPUNK DOLL





Supplies needed:

I am using the amazing Exclusive artwork from Scraps N Company for this tutorial which you can free with purchase here

Scrapkit: I am using a stunning kit from Mistylynn's Creations called "Steampunk Doll" which you can get by going here

Template 44 from Scrapity Scrap and More which you can find here

Mask 124 from Bitzy Beez Designz which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 785 x 650

Select Circle Raster 15

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/hide original circle layer

Select Circle Raster 7 and repeat above steps

Select Circle Raster 17 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Circle Raster 9 layer and repeat above steps

Select Raster 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original strip layer

Select Strip Raster 14 and repeat above steps

Select Strip Raster 8 layer

Select all, float, defloat

Add new raster and flood-fill with color of choice

Select none

Delete/Hide original strip layer

Select Strip Raster 13 layer and repeat above steps

Select Rectangle 16 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 12 layer and repeat above steps

Select Rectangle Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide Rectangle layer

Select Rectangle Raster 6 and repeat above steps

Select Rectangle Raster 10 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original rectangle layer

Select Oval Raster 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original oval layer

Select Oval Raster 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original oval layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 18 - resize by 55%

Paste and position on top left

Select Element 13 - resize by 25%

Select Element 15 - resize by 65%

Paste and position on bottom right

Select Element 27 - resize by 40%

Paste and position on bottom right

Select Element 39 - resize by 40%

Paste and position on bottom right

Select Element 11 - resize by 40%

Image Free Rotate Right by 15% and position on bottom right

Select Element 34 and paste on bottom where desired

Select Element 20 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 23 - resize by 45%

Paste and position on bottom left

Select Element 25 - resize by 40%

Paste and position on bottom left

Select Element 31 - resize by 35%

Paste and position on bototm left

Select Element 22 - resize by 40%

Paste and position on bottom left

Select Element 8 - resize by 40%

Paste and position on top left

Select Element 12 - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 124

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

IF YOU LOVE SOMETHING




Supplies needed:

I am using the amazing art from Enys Guerrero for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "If You Love Something" which you can get by going here

Floral Mask 2 from Dee which you can find here

Plugins: Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame layer

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Berries Element - resize by 30%

Paste and position on top right

Select Butterfly Element - resize by 30%

Paste and position on right side

Select Bow1 Element - resize by 40%

Paste and position on bottom right

Select Hat Element - resize by 30%

Paste and position on bottom right

Select Wing Element - resize by 20%

Image mirror and paste on bottom right

Select Key Element - resize by 20%

Paste and position on bottom right

Select Stone Element - resize by 50%

Paste and position on bottom

Select WaxRose Element - resize by 20%

Image mirror and paste on bottom

Select CrystalBall Element - resize by 25%

Paste and position on bottom

Select Book Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Bird Element - resize by 25%

Paste and position on bottom left

Select Broach Element - resize by 18%

Image Free Rotate Right by 5% and paste on bottom left

Select Candle1 Element - resize by 30%

Paste and position on left side

Select MoonPhases Element - resize by 30%

Image mirror and paste on top left

Select Smudged3 Element - paste and position on left side where desired and move to bottom layer

Image duplicate, mirror and reposition on right side

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 2 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, April 14, 2014

BLACK SWAN





Supplies needed:

I am using the amazing art from Verymany for for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Pink Paradox Productions called "Black Swan" which you can get by going here

Mask 8 from Zuzzanna which you can find here

Plugins: Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Resize by 60%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 25

Select invert, delete

Select Close-up tube of choice and paste on top of paper where desired and delete

Select none

Change opacity on tube to Luminence (Legacy) and drop down to 65%

Apply Dropshadow and merge on top of paper

Move paper/tube below frame layer

Select Element 91 - resize by 50%

Image Free Rotate Right by 5% and paste on right side

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 5 - resize by 25%

Paste and position on top right

Select Element 105 - resize by 55%

Paste and position on right side

Image duplicate and mirror

Select Element 52 - resize by 20%

Paste and position on bottom right

Select Element 90 - resize by 25%

Paste and position on bottom right

Select Element 12 - resize by 22%

Paste and position on bottom right

Select Element 40 - resize by 25%

Paste and position on bottom right

Select Element 9 - resize by 22%

Paste and position on bottom right

Select element 44 - resize by 20%

Paste and position on bottom right

Select Element 68 - resize by 15%

Paste and position on bottom

Select Element 63 - resize by 20%

Paste and position on bottom

Select Element 13 - resize by 20%

Paste and position on bottom

Select Element 28 - resize by 45%

Paste and position on bottom left

Select Element 69 - resize by 25%

Paste and position on bottom left

Select Element 15 - resize by 25%

Paste and position on bottom left

Select Element 66 - resize by 25%

Paste and position on bottom left

Select Element 36 - resize by 20%

Paste and position on bottom left

Select Element 32 - resize by 25%

Paste and position on bottom left

Select Element 124 - resize by 10%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 8 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, April 13, 2014

KISS THIS





Supplies needed:

I am using the amazing artwork from Ted Hammond for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Kiss This" which you can get by going here

Template 3 from Rosesblack which you can find here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 650 x 600

Select Diamond Copy Raster 5 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original diamond layer

Select Diamonds Copy Raster 12 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/hide original diamonds layer

Select Shape Rsater 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original shape layer

Select Raster 7 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original raster 7 layer

Select Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original Raster 8 layer

Select Shape Raster 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Delete/Hide original shape layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 49 - resize by 65%

Paste and position on top where desired

Image duplicate and flip - reposition on bottom where desired

Select Element 65 - resize by 50%

Paste and position on bottom right

Select Element 58 - resize by 30%

Paste and position on bottom right

Select Element 66 - paste and position on bottom where desired

Select Element 56 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 33 - resize by 35%

Paste and position on bottom left

Select Element 15 - resize by 30%

Past and position on bottom left

Select Element 41 - resize by 45%

Paste and positon on bottom left

Select Element 9 - resize by 30%

Paste and position on bottom left

Select Element 10 - resize by 30%

Paste and position on top left

Select Element 38 - resize by 45%

Image Free Rotate Right by 15% and paste on top right

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

DARE TO BE DIFFERENT





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Disturbed Scraps called "Dangerous Babe" which you can get by going here

Template 297 from Minxy which you can find here

Grunge Mask 2 from Tonya which you can find here

Plugins used: Alien Skin Xenofex 2 - Constellation (optional), Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 650 x 600

Select "Different" Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Eyecandy Glass on default settings

Delete/Hide original wordart layer

Select Glittered Different wordart layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Element 88 - resize by 90%

Paste and position on right side below wordart layer

Apply Alien Skin Constellation with the following settings if desired:

Select Pixel words layer

Add new raster layer and flood-fill with color of choice

Reselect pixel layer

Select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Delete/Hide original pixel layer

Select "Dare to be" wordart layer

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Thin Rectangle 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Half Circle layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Thin Rectangle 1 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Thin Rectangle 3 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 47 - resize by 80%

Paste and position on left side where desired

Select Element 25 - resize by 35%

Image Free Rotate Left by 15% and paste on top left

Select Element 75 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 64 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 58 - resize by 40%

Paste and position on bottom left

Select Element 28 - resize by 30%

Paste and position on bottom left

Select Element 65 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 29 - resize by 35%

Paste and position on bottom left

Select Element 7 - resize by 30%

Paste and position on bottom left

Select Element 15 - resize by 20%

Paste and position on bottom left

Select Element 44 - resize by 45%

Paste and position on bottom

Select Element 16 - resize by 35%

Paste and position on bottom right

Select Element 21 - resize by 25%

Paste and position on bottom right side

Select Element 61 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 66 - resize by 40%

Paste and position on bottom right

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 30

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, April 10, 2014

YOU SWEETEN MY COFFEE





Supplies needed:

I am using the amazing artwork from Trinita for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Mint Mocha Latte" which you can get by going here

Template 567 from Millie which you can find here

Mask 30 from Millie which you can find here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust the canvas size to 700 x 600

Select Wordart 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Wordart 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Apply Eyecandy Gradient Glow on medium default settings

Delete/Hide original wordart layer

Select Strip 8 layer

Select all, float, defloat

Paste paper 32

Select invert, delete, select none

Delete/Hide original strip layer

Select Rounded Rectangle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/hide original rectangle layer

Select Circle 6 layer

Select all, float, defloat

Paste paper 36

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 5 layer

Select all, float, defloat

Paste paper 30

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 3 layer

Select all, float, defloat

Paste paper 26

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 and repeat above steps

Select Square 2 layer

Select all, float, defloat

Paste paper 23

Select invert, delete, select none

Delete/Hide original square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 70 - resize by 20%

Image Free Rotate Left by 15% and paste bottom left

Select Element 62 - resize by 25%

Paste and position on bottom left

Select Element 3 - resize by 30%

Image Free Rotate Right by 15% and paste on top right

Select Elmeent 71 - resize by 25%

Paste and position on bottom right

Select Element 4 - resize by 20%

Paste and position on bottom right

Select Element 10 - resize by 45%

Paste and position on bottom right

Select Element 35 - resize by 12%

Paste and position on bottom right

Select Element 42 - resize by 15%

Paste and position on bottom right

Select Element 123 - resize by 12%

Paste and position on bottom right

Select Element 65 - size by 15%

Paste and position on bottom

Select Element 27 - resize by 12%

Paste and position on bottom

Select Element 31 - resize by 12%

Paste and position on bottom

Select Element 37 - resize by 15%

Paste and position on bottom

Select Element 77 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom

Select Element 11 - resize by 30%

Paste and position on bottom

Select Element 32 - resize by 12%

Paste and position on bottom

Select Element 146 - resize by 25%

Image Free Rotate Right by 15% and paste on top right

Select Element 127 - resize by 20%

Paste and position on top right

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 30

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif