I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Wednesday, May 28, 2014

SUMMER AMELIA





Supplies needed:

I am using the amazing artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Cyber Goth Summer" which you can get by going here

Template 584 from Millie which you can find here

Mask 2 from Country Gal which you can find on the Misfits Blog here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 650

Select Rectangle 12 layer

Select all, float, defloat

Paste paper 28

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tubes to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Circle 10 layer and repeat above steps

Select Square 9 layer

Select all, float, defloat

Paste paper 38

Select invert, delete, select none

Delete/Hide original square layer

Select Square 8 and repeat above steps

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 6 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 5 and repeat above steps

Select Rectangles 4 layer

Select all, float, defloat

Paste paper 37

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 3 layer and repeat above steps

Select Circle 2 layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 88 - resize by 35%

Paste and position on top

Select Element 65 - resize by 50%

Paste and position on right side where desired

Select Element 105 - resize by 25%

Paste and position on top right

Select Element 103 - resize by 25%

Paste and position on bottom right

Select Element 2 - resize by 25%

Paste and position on bottom right

Select Element 27 - resize by 15%

Paste and position on bottom right

Select Element 20 - resize by 20%

Paste and position on bottom right

Select Element 19 - resize by 20%

Paste and position on bottom right

Select Element 37 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 30 - resize by 20%

Paste and position on bottom right

Select Element 39 - resize by 25%

Paste and position on bottom

Select Element 1 - resize by 20%

Paste and position on bottom

Select Element 89 - resize by 40%

Paste and position on bottom left

Select Element 32 - resize by 30%

Paste and position on bottom left

Select Element 41 - resize by 25%

Paste and position on bottom left

Select Element 51 - resize by 25%

Paste and position on bottom left

Select Element 53 - resize by 15%

Paste and position on bottom left

Select Element 104 - resize by 20%

Paste and position on top left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Monday, May 26, 2014

CYBER PUNK




Supplies needed:

I am using the amazing artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Lizquis Scraps called "Cyberpunk" which you can get by going here

Template 48 from RoseBlack Creation which you can find here

Mask 74 from Trese which you can find here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D)

duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 600 x 600

Select Circles Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change tubes to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 80%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circles layer

Select Rectangle Copie de Raster 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Strip Raster 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original strips layer

Select Circle Frame Copie Raster 5 layer and repeat above steps

Select Circle Copie de Copie Raster 5

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Circles Copie (2) sur Raster 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original circles layer

Select Circles Copie de Raster 5 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circles layer

Select Rectangles Raster 6 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rectangles layer

Select Stars Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 25%, Monochrome checked)

Delete/Hide original stars layer

Select Strips Raster 1 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original strips layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Wire 1 Element - resize by 85%

Paste and position on top where desired

Select City Element - resize by 68%

Paste and position on top where desired

Select Barrel Element - resize by 30%

Paste and position on bottom right

Select Knuckles Element - resize by 20%

Image mirror and paste on bottom right

Select Bear Element - resize by 30%

Image mirror and paste on bottom right

Select Roseheart Element - resize by 25%

Paste and position on bottom right

Select Spiked Heart Element - resize by 35%

Paste and position on bottom left

Select Mask 2 Element - resize by 25%

Paste and position on bottom left

Select Speakers Element - resize by 35%

Paste and position on bottom left

Select Shoe Element - resize by 25%

Paste and position on bottom left

Select Fire Element - resize by 40%

Paste and position on top right

Select Lips Element - resize by 25%

Image Free Rotate Left by 15% and paste on top left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 74 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!



Saturday, May 24, 2014

GOTHIC ROSE





Supplies needed:

I am using the amazing artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Gothic Rose" which you can find here

Collab Template from Missy and Rose which you can find here

Mask 249 from Becky which you can find here

Plugins used: Eyecandy 4000 - Glass, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 600

Select Wordart Raster 13 layer and delete

Select Circle Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default setting

Delete/Hide original circle layer

Select Circle Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tubes to Luminence - Legacy

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 85%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Square Frame Raster 1 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Square Copy of Raster 9 layer and repeat above steps

Select Square Frame Raster 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Delete/Hide orginal square layer

Select Square Raster 10 and Copy of Raster 10 and repeat above steps

Select Dotted Line Raster 12 layer

Add new raster layer and flood-fill with color of choice

Reselect dotted line - select all, float, defloat

Go back to color layer you just filled

Select invert, delete, select none

Delete/Hide original dotted line

Select Dotted Line Copy of Raster 12 and repeat above steps

Select Square Raster 11

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Select none

Delete/Hide original square layer

Select Square Copy of Raster 11 and repeat above steps

Select Circle Raster 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original circle layer

Select Rectangle Promoted Selection layer

Select Element 63 - resize by 30%

Paste and position on top of promoted selection layer

Image duplicate, mirror and reposition over the Copy of promoted selection layer

Select Circles Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circles layer

Select Circles Raster 5 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circles layer

Select Strip Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effect, Texture Effects, Blinds (Width 3, Opactity 35, Horizontal and Light from left/top checked, Color #ffffff)

Delete/Hide original strip layer

Select Strip Copy of Raster 8 layer and repeat above steps

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Promoted Selection 1 and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 64 - resize by 50%

Paste and position on top left

Select Element 22 - resize by 85%

Paste and position on left side where desired

Select Element 19 - resize by 55%

Paste and position on left side

Select Element 15 - resize by 40%

Paste and position on bottom left

Select Element 75 - paste and position on bottom left

Select Element 69 - resize by 50%

Paste and position on left side

Select Element 18 - resize by 55%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 50 - resize by 60%

Image mirror and paste on bottom left

Select Element 40 - resize by 40%

Paste and position on bottom

Select Element 9 - resize by 50%

Paste and position on right side

Select Element 66 - resize by 25%

Paste and position on top right

Select Element 43 - resize by 40%

Paste and position on bottom right

Select Element 44 - resize by 40%

Paste and position on bottom right

Select Element 32 - resize by 50%

Paste and position on bottom right

Select Element 53 - resize by 55%

Paste and position on bottom right

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 249 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


HAREM DANCER





Supplies needed:

I am using the amazing art from Angelica Sellers for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Harem Dancer" which you can get by going here

Mask 112 from Trese which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 81 - resize by 55%

Paste in the center of the canvas

Select Element 61 - resize by 20%

Paste and position on top right

Select Element 78 - resize by 75%

Paste and position on bottom below tent layer

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Element 49 - resize by 20%

Paste and position on bottom left

Select Element 92 - resize by 20%

Image mirror and paste on bottom left

Select Element 33 - resize by 20%

Paste and position on bottom left

Select Element 6 - resize by 40%

Paste and position on left side

Select Element 37 - resize by 25%

Paste and position on bottom left

Select Element 23 - resize by 25%

Paste and position on bottom

Select Element 24 - resize by 25%

Paste and position on bottom

Select Element 22 - resize by 22%

Paste and position on bottom

Select Element 41 - resize by 25%

Paste and position on bottom

Select Element 21 - resize by 15%

Paste and position on bottom

Select Element 28 - resize by 25%

Paste and position on bottom right

Select Element 50 - resize by 15%

Paste and position on bottom right

Select Element 39 - resize by 20%

Paste and position on bottom right

Select Element 56 - resize by 8%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 46 - resize by 15%

Paste and position on bottom right

Select Element 12 - resize by 22%

Paste and position on top left

Paste paper 23 on canvas

Apply Mask 119 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, May 23, 2014

PUMPED UP EMO





Supplies needed:

I am using an Exclusive artwork from Picsfordesign for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Pumped Up Kicks" which you can get by going here

Template 82 from Addictive Pleasures which you can find here

Mask 363 from Weescottlass which you can find here

Plugins used: Eyecandy 4000 - Glass, Xero - Radiance, VM Extravaganza - Transmission, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 700

Select Stars Raster 13 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original stars layer

Select "Emo and Star" wording and delete

Select Stars Raster 11, 12 and Copy of Raster 11 and 12 layers and repeat above steps from previous stars and apply Eyecandy Glass on default settings if desired

Select Circle Raster 4 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Oval Raster 7 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original oval layer

Select Strip Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original strip layer

Select Strip Copy of Raster 8 layer and repeat above steps

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Appy VM Transmission with the following settings:

Delete/Hide original circle layer

Select Circle Copy of Raster 5 and repeat above steps

Select Square Raster 3 layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/Hide original square layer

Select Shape Raster 5 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original shape layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 17 and paste on top where desired

Select Element 63 - resize by 40%

Image Free Rotate Right by 15% and paste on top right

Select Element 66 - resize by 55%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 57 - resize by 45%

Paste and position on bottom left

Select Element 52 - resize by 30%

Paste and position on bottom left

Select Element 1 - resize by 45%

Paste and position on bottom left

Select Element 14 - resize by 55%

Paste and position on bottom right

Select Element 19 - resize by 50%

Paste and position on bottom right

Select Element 68 - resize by 85%

Paste and position on bottom right

Select Element 23 - resize by 45%

Paste and position on bottom right

Select Element 40 - resize by 55%

Paste and position on bottom where desired

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, May 21, 2014

DARK MOMENTS





Supplies needed:

I am using the amazing art from Zindy Nielsen for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Tiny Moments 5" which you can get by going here

Mask 119 from Designs by Vaybs which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete

Paste close-up tube of choice on top of paper and delete

Select none

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-up down on top of paper layer

Move layer below frame

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Berries Element - resize by 35%

Paste and position on top left

Select Butterfly Element - resize by

Image Free Rotate Left by 15% and paste on top left

Select Doll Element - resize by 30%

Paste and position on bottom left

Select Book Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Jewels Element - resize by 65%

Paste and position on bottom below tube layer

Select Skull Element - resize by 40%

Paste and position on bottom left

Select Key Element - resize by 25%

Paste and position on bottom left

Select Feather Element - resize by 30%

Paste and position on bottom right

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Pillow2 Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Flower3 Element - resize by 30%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 119 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

CAT LOVER





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning matching Collab kit from Designs by Joan called "Cat Lover" which you can get by going here

Template from Stylicious Twinky which you can find here

Mask 22 from Becky which you can find here

Plugins used: Eyecandy 4000 - Marble, Alien Skin Eyecandy 5 - Texures (Animal Fur), Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 700 x 600

Select your magic wand and select the inner portion of the "Meow" wording

Apply Eyecandy Marble with the following settings:

Select Square Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tubes to Luminence - Legacy

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Circle Raster 7 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Square Raster 6 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 5 layer and repeat above steps

Select Strip Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Apply Eyecandy Fur with the following settings:

Delete/Hide original strip layer

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square Raster 1 layer

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 85%

Paste and position in the bottom center below tube layer

Select Element 19 - resize by 80%

Paste and position in the center below tube layer

Select Element 46 - resize by 35%

Image mirror and paste on bottom right

Select Element 32 - resize by 30%

Paste and position on bottom right

Select Element 20 - resize by 30%

Image mirror and paste on bottom right

Select Element 14 - resize by 35%

Paste and position on bottom left

Select Element 28 - resize by 30%

Paste and position on bottom left

Select Element 33 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 20%

Paste and position on bottom left

Select Element 30 - resize by 15%

Paste and position on bottom left

Select Element 44 - resize by 25%

Paste and position on right side

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, May 18, 2014

LITTLE RED





Supplies needed:

I am using the amazing art from Zlata M for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Beware the Wolf" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 91- resize by 66%

Paste and position in the center of the canvas

Select Element 81 - resize by 22%

Paste and position on top right

Change color saturation as follows if desired:

Select Element 11 - resize by 25%

Paste and position on top right

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Element 92 - resize by 85%

Paste and position on bottom below tube layer

Select Element 105 - resize by 20%

Paste and position on top left

Image duplicate, mirror and reposition on right

Select Element 3 - resize by 22%

Paste and position on bottom right

Select Element 112 - resize by 15%

Paste and position on bottom right

Sleect Element 23 - resize by 15%

Paste and position on bottom right

Select Element 18 - resize by 15%

Paste and position on bottom right

Select Element 21- resize by 15%

Paste and position on bottom right

Select Element 15 - resize by 16%

Paste and position on bottom right

Select Element 65 - resize by 20%

Paste and position on bottom right

Select Element 111 - resize by 15%

Paste and position on bottom right

Select Element 28 - resize by 18%

Paste and position on bottom below tube layer where desired

Select Element 38 - resize by 18%

Paste and position in basket element

Select your eraser tool and erase any overhanging bits to make it blend into the basket

Select Element 55 - resize by 18%

Paste and position on bottom below tube layer where desired

Select Element 63 - resize by 20%

Paste and position on bottom where desired

Select Element 12 - resize by 18%

Paste and position on bottom

Select Element 54 - resize by 17%

Paste and position on bottom where desired

Select Element 60 - resize by 18%

Image Free Rotate Left by 20% and paste on bottom

Select Element 46 - resize by 25%

Paste and position on bottom left

Select Element 16 - resize by 20%

Paste and position on bottom left

Select Element 39 - resize by 15%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 20 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, May 17, 2014

CUTE FLIRT




Supplies needed:

I am using the amazing artwork from Vi Nina for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Naughty Girls" which you can get by going here

Template from Stylicious Twinky which you can find here

Mask 249 from Trese which you can find here

Plugins used: Alien Skin 5 - Textures (Noise), Alien Skin Xenofex 2 - Constellation, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 600

Select "Cute Flirt" Wordart Raster 11 layer

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Wordart Raster 10 layer and repeat above step

Select Square Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tubes to Luminence - Legacy

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 85%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Square Raster 7 and repeat above steps

Select Square Raster 6 layer

Select all, float, defloat

Add new layer and flood-fill with color of choice

Select none

Apply Eyecandy Texture Noise on default settings

Delete/Hide original square layer

Select Square Raster 5 layer and repeat above steps

Select Square Raster 4 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 3 layer and repeat above steps

Select Square Raster 2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 40 - resize by 60%

Paste and position on top below tube layer

Apply Alien Skin Constellation with the following settings:

Select Element 57 - resize by 35%

Paste and position on bottom where desired

Select magic wand and select center squares on the film

Selections, modify, expand by 3

Paste paper 5

Select invert, delete, select none

Move paper below frame

Select Element 53 - resize by 60%

Paste and position in the center below tube layer

Select Element 60 - resize by 30%

Paste and position on bottom left

Select Element 34 - resize by 25%

Past and position on bottom left

Select Element 32 - resize by 40%

Paste and position on bottom left

Select Element 76 - resize by 35%

Paste and position on bottom left

Select Element 21 - resize by 40%

Paste and position on bottom left

Select Element 52 - resize by 35%

Paste and postion on bottom left

Select Element 54 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 40%

Paste and position on bottom

Select Element 46 - resize by 65%

Paste and postion on bottom left

Select Element 65 - resize by 35%

Paste and position on bottom

Select Element 74 - resize by 40%

Paste and position on bottom right

Select Element 22 - resize by 50%

Paste and postion on bottom right

Select Element 18 - resize by 55%

Paste and position on bottom right

Select Element 36 - resize by 22%

Pate and position on bottom right

Select Element 49 - resize by 25%

Paste and position on bottom right

Select Element 28 - resize by 30%

Paste and position on top left and move to bottom layer

Image duplicate, mirror, flip and reposition on top right

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 16 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, May 15, 2014

SWEET TEMPTATION





Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Precious" which you can get by going here

Template from Stylicious Twinky which you can find here

Mask 16 from Gina Gems which you can find here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 600

Select Wordart layer

Select your magic wand and select the "S"

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Rectangles Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change tubes to Luminence - Legacy

Apply Xero Radiance at default settings or random setting of choice

Drop opacity down on tubes to 75%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original rectangles layer

Select Circle Raster 4 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Raster 3 layer and repeat above steps

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 39 - resize by 55%

Paste and position on bottom below tube layer

Select Element 84 - resize by 55%

Paste and position on left side below tube layer

Select Element 107 - resize by 25%

Paste and position on bottom right

Select Element 12 - resize by 30%

Paste and position on bottom right

Image duplicate and mirror

Select Element 68 - resize by 15%

Paste and position on bottom right

Select Element 45 - resize by 30%

Paste and position on bottom left

Select Element 22 - resize by 22%

Paset and position on bottom left

Select Element 75 - resize by 40%

Paste and position on bottom left

Select Element 63 - resize by 20%

Paste and position on bottom left

Select Element 42 - resize by 30%

Paste and position on bottom left

Select Element 23 - resize by 30%

Paste and position on bottom left

Select Element 59 - resize by 75%

Paste and position on top where desired

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 16 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Tuesday, May 13, 2014

LOVELY LAVENDAR





Supplies needed:

I am using the amazing artwork from Verymany for this tutorial which you can find here

Scrapkit: I am using a stunning kit from PinkParadox Productions called "Lovely Lavendar" which you can get by going here

Template from Stylicious Twinky which you can find here

Mask 44 from Moonbeams and Spiderwebs which you can find here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 700

Select Wordart layer

Select your magic wand and select he areas you want to change the color

Add new raster layer and flood-fill with color of choice

Select none

Select Squares Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change tubes to Luminence - Legacy

Apply Xero Radiance at default settings or random setting of choice

Drop opacity down to 75%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original squares layer

Select Rectangle Raster 5 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 4 layer

Select all, float, defloat

Paste paper 27

Select invert, delete, select none

Delete/Hide original circle layer

Select Frame Element 12 - resize by 60%

Paste and position on top of circle layer

Select Rectangle Raster 3 layer

Apply Texture, Texture Effects, Weave (Gap size 3, Width 5, Opactity 10, Fill gaps checked)

Select Rectangle Raster 2 and repeat above step

Select Rectangle Raster 1

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 18 - resize by 20%

Image mirror and paste on top right

Select Element 5 - resize by 25%

Image mirror and paste on top left

Select Element 78 - resize by 22%

Paste and position on bottom left

Select Element 19 - resize by 20%

Paste and position on top of basket element and erase any excess to blend in

Select Element 101 - resize by 12%

Paste and position on bottom left

Select Element 30 - resize by 18%

Paste and position on bottom left

Select Element 109 - resize by 25%

Paste and position on bottom left

Select Element 56 - resize by 35%

Paste and position on bottom right

Select Element 9 - resize by 22%

Paste and position on bottom right

Select Element 15 - resize by 12%

Paste and position on bottom right

Select Element 29 - resize by 25%

Paste and position on bottom right

Select Element 39 - resize by 20%

Paste and position on bottom right

Select Element 13 - resize by 20%

Paste and position on bottom right

Select Element 130 - resize by 30%

Paste and postion on right side

Image duplicate, mirror and flip - reposition where desired

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 44 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Monday, May 12, 2014

EVIL ANGEL





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Hania's Designs called "Angel Eyes" which you can get by going here

Template 159 from Toxic Desirez which you can find here

Mask 111 from Designs by Vaybs which you can find here

Plugins used: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 12, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 700

Select Wordart layer

Select your Change to Target brush as shown:

Change color on palette to #7b3724 and brush over purple areas of the wordart

Select the Pixel Words layer and repeat for the "Angel" wording

Select Right Star layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original star layer

Select Left Star layer and repeat above steps

Select Large Circle 2 layer

Paste paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Select Glitter Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original circle layer

Select Right Square 2 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Left Square 1 layer and repeat above steps

Select Dotted Circle and Dotted Squares layer and delete

Select Left Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence - Legacy

Apply Xero Radiance at default settings or random setting of choice

Drop opacity down to 60%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Right Circle 2 and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 31 - resize by 50%

Paste and position on top where desired

Select Element 78 - resize by 55%

Paste and position on top where desired

Select Element 83 - resize by 50%

Paste and position on top where desired

Select Element 81 - resize by 90%

Paste and position on left side

Select Element 84 - resize by 50%

Paste and position on top left

Select Element 1 - resize by 50%

Paste and positon on bottom right

Select Element 80 - resize by 25%

Paste and positio non bottom right

Select Element 42 - resize by 40%

Paste and position on bottom right

Select Element 51 - resize by 40%

Paste and position on bottom right

Select Element 3 - resize by 35%

Paste and position on bottom right

Select Element 63 - resize by 45%

Paste and position on bottom left

Select Element 34 - resize by 40%

Paste and position on bottom left

Select Element 79 - resize by 50%

Paste and position on bottom left

Select Element 25 - resize by 35%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 111 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Saturday, May 10, 2014

MAD ALICE






Supplies needed:

I am using the amazing artwork from Ninaste for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mistylynn's Creations called "Alice" which you can get by going here

Collab Template from Dee and Kandee which you can find here

Mask 176 from Aqua which you can find here

Plugins used: Eyecandy 4000 - Marble, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 700 x 700

Select Wordart layer

Take your selection tool and select the "Mad" portion

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Merge down

Select Dark Salmon Circle layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Brown Square 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Medium Salmon Oval layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original oval layer

Select Brown Square 2 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Pink Circles layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original circles layer

Select Brown Rectangle 1 layer

Apply Eyecandy Marble on the following settings:

Select Left Peach Rectangle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Medium Salmon Circles

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circles layer

Select Large Dark Salmon Circle layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 36 - paste and position on right side

Select Element 3 - resize by 50%

Paste and position on top where desired

Select Element 23 - resize by 65%

Paste and position on bottom right

Select Element 15 - resize by 45%

Image mirror on bottom right

Select Element 38 - resize by 30%

Paste and position on bottom right

Select Element 27 - resize by 25%

Paste and position on bottom right

Select Element 5 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom

Select Element 37 - resize by 25%

Paste and position on bottom

Select Element 13 - resize by 20%

Paste and position on bottom

Select Element 35 - resize by 35%

Paste and position on bottom left

Select Element 16 - resize by 30%

Paste and position on bottom left

Select Element 55 - resize by 30%

Paste and position on bottom left

Select Element 62 - resize by 30%

Paste and position on bottom left

Select Element 50 - paste and position in the center

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 176 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


MERMAID PRINCESS





Supplies needed:

I am using the amazing artwork from Trinita for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Mermaid Princess" which you can get by going here

Template 313 from Millie which you can find here

Mask 59 from Weescotslass which you can find here

Plugins used: Alien Skin Nature - Ripples, Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 700

Select Wordart 14 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Square 13 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient

Select invert, delete, select none

Change tube to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 90%

Apply dropshadow and merge close-up down on top of gradient

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Square 12 layer and repeat above steps

Select Circle 11 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Apply Eyecandy Glass on default settings of choice

Delete/Hide original circle layer

Select Circle 10 layer and repeat above steps

Select Circle 9 layer

Select Frame Element 7 - resize by 42%

Paste and position on top of circle 9 layer

Image duplicate, mirror and reposition over circle 8 layer

Select Cirlce 7 layer

Select all, float, defloat

Paste paper 21

Select invert, delete, select none

Delete/Hide original circle layer

Select Frame Element 3 - resize by 60%

Paste and position on top of circle 7 layer

Select Oval 5 layer

Select all, float, defloat

Paste paper 34

Select invert, delete, select none

Delete/Hide original oval layer

Select Square 4 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Nature - Ripple with the following settings:

Delete/Hide original rectangle layer

Select Rectangle 3 and repeat above steps

Select Rectangle 1 layer

Select all, float, defloat

Paste paper 36

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Element 79 - resize by 45%

Paste and position on bottom

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 25%

Paste and position on right side where desired

Select Element 94 - resize by 30%

Paste and position on bottom right

Select Element 61 - resize by 25%

Paste and position on bottom right

Select Element 68 - resize by 15%

Paste and position on bottom right

Select Element 37 - resize by 20%

Paste and position on bottom right

Select Element 11 - resize by 20%

Paste and position on top of chest

Select Element 47 - resize by 20%

Paste and position on bottom right

Select Element 33 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 14 - resize by 25%

Image mirror and paste on bottom left

Select Element 53 - resize by 15%

Paste and position on bottom left

Select Element 59 - resize by 15%

Paste and position inside clam shell

Select Element 110 - resize by 15%

Paste and position on bottom left

Select Element 31 - resize by 20%

Paste and position on bottom left

Select Element 66 - resize by 15%

Paste and position on bottom left

Select Element 114 - resize by 25%

Paste and position on bottom left

Select Element 32 - resize by 25%

Paste and position on bottom where desired

Select Element 25 - resize by 20%

Image Free Rotate Left by 15% and paste on top right

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 39 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Friday, May 9, 2014

TINY MOMENTS





Supplies needed:

I am using the an Exclusive tube from Picsfordesign for for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Chili Designz called "Tiny Moments 3" which you can get by going here

Floral Grunge Frame from Essex Girl which you can find here

Plugins: Xero - Porcelain, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 9, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 90%

Apply dropshadow and merge close-up down on top of gradient layer

Move layer below frame

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Paste tube of choice where desired

Apply Xero Porcelain with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Feather Element - resize by 32%

Paste and position on top right

Select Butterfly Element - resize by 30%

Paste and position on top right

Select Pott Element - resize by 35%

Paste and position on bottom right

Select Jewel 4 Element - resize by 85%

Paste and position on bottom right

Select Jewel 3 Element - resize by 75%

Paste and position on bottom right

Select Flower 4 - resize by 40%

Paste and position on bottom right

Select Bottle Element - resize by 25%

Paste and position on bottom right

Select Parasol Element - resize by 40%

Paste and position on bottom left

Select Flower Element - resize by 30%

Paste and position on bottom left

Select Flower 3 Element - resize by 30%

Paste and position on bottom left

Select Berries Element - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Floral Mask 1 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, May 8, 2014

BAD BOYS






Supplies needed:

I am using the amazing artwork from Vi Nina for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Designs by Joan called "Dempsey" which you can get by going here

Bad Boy Template from Stylicious Twinky which you can find here

Mask 39 from Moonbeams and Spiderwebs which you can find here

Plugins used: Penta - Jeans, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 8, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 750 x 650

Select Wordart Raster 9 layer

Select your Change to Target brush as shown:

Change color on palatte to #b76a5b and brush over "Bad Boys" portion of the wordart

Select Circle Raster 8 layer

Select all, float, defloat

Paste close-up tube of choice on top of circle

Select invert, delete, select none

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 80%

Apply dropshadow and merge close-up down on top of circle

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Select Element 4 - resize by 90%

Paste and position on top of circle layer

Select Rectangle Raster 7 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Jeans with the following settings:

Delete/Hide original rectangle layer

Select Square Raster 5 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 4 and repeat above steps

Select Rectangle Raster 3 layer

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Select Square Raster 2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 57 - resize by 45%

Image Free Rotate Right by 15% and paste on top right

Select Element 35 - resize by 30%

Paste and position on right side

Select Element 19 - resize by 35%

Paste and position on bottom right

Select Element 40 - resize by 20%

Paste and position on bottom right

Select Element 38 - resize by 50%

Paste and position on bottom right

Select Element 30 - resize by 25%

Paste and position on bottom left

Select Element 68 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 29 - resize by 45%

Paste and position on bottom left

Select Element 70 - resize by 30%

Paste and position on bottom left

Select Element 39 - resize by 40%

Paste and position on bottom left

Select Element 16 - resize by 25%

Paste and position on bottom left

Select Element 28 - resize by 40%

Paste and position on bottom left

Select Element 10 - resize by 40%

Paste and position on top left

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 39 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!



Tuesday, May 6, 2014

PRINCESS





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Princess Collab" which you can get by going here

Template 247 from Toxic Desirez which you can find here

Flower Mask which you can find here

Plugins used: Eyecandy 4000 - Marble, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 6, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas 775 x 650

Select Oval Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original oval layer

Select Star Raster 6 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original star layer

Select Star Copy of Raster 6 and repeat above steps

Select Strip Raster 5 layer

Apply Eyecandy Marble with the following settings:

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square Raster 8 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square Copy of Raster 8 and repeat above steps

Select Circle Raster 7 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Copy of Raster 7 layer and repeat above steps

Select Rectangle Raster 9 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Oval Raster 10 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original oval layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 1 - resize by 55%

Paste and position on bottom right

Select Element 60 - resize by 75%

Paste and position on top right

Select Element 36 - resize by 25%

Paste and position on top right

Select Element 70 - resize by 20%

Paste and position on bottom right

Select Element 48 - resize by 25%

Paste and position on bottom right

Select Element 43 - resize by 35%

Paste and position on bottom right

Select Element 53 - resize by 55%

Paste and position on left side where desired

Select Element 13 - resize by 45%

Paste and position bottom left

Select Element 66 - resize by 35%

Paste and position on bottom left

Select Element 81 - resize by 55%

Paste and position on bottom left

Select Element 54 - resize by 40%

Paste and position on bottom where desired

Select Element 50 - resize by 32%

Paste and position on bottom where desired

Select Element 77 - resize by 50%

Paste and positon on bottom

Select Element 3 - resize by 55%

Paste and position on bottom

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Flower Mask or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!



Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif