I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Thursday, July 31, 2014

CIRCUS





Supplies needed:

I am using the amazing art from Danny Lee for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching Collab kit from Bibi's Collections called "Circus" which you can get by going here

Mask 147 from Weescottlass which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 31, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 21 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 10

Select invert, delete, select none

Move paper below frame layer

Select Element 126 - resize by 50%

Paste and position on top of frame where desired

Select Element 153 - resize by 25%

Paste and position on top of frame

Apply Eyecandy Gradient Glow on fat defaults settings (Glow Width 3)

Select Element 71 - resize by 35%

Paste and position on top right

Select Element 65 - resize by 22%

Paste and position in the center of one of the hoops

Image duplicate and reposition on second hoop of choice

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 154 - resize by 80%

Paste and position on left side

Select Element 2 - resize by 25%

Paste and position on top left

Select Element 137 - resize by 25%

Image Free Rotate Left by 15% and paste on left side

Select Element 92 - resize by 20%

Paste and position on left side

Select Element 61 - resize by 25%

Paste and position on left side

Select Element 95 - resize by 40%

Paste and position on left side

Select Element 38 - resize by 55%

Paste and position on the top center of the frame

Select Element 101 - resize by 50%

Paste and position in the center of the frame where desired

Select Element 68 - reisze by 40%

Paste and position on bottom left

Select Element 63 - resize by 30%

Paste and position on bottom left

Select Element 9 - resize by 40%

Paste and position on bottom left

Select Element 96 - resize by 45%

Paste and position on bottom left

Select Element 17 - resize by 25%

Paste and position on bottom

Select Element 66 - resize by 40%

Paste and position on bottom

Select Element 97 - resize by 30%

Paste and position on bottom

Select Element 74 - resize by 30%

Paste and position on bottom left

Select Element 100 - resize by 40%

Paste and position on bottom left below tube

Select Element 123 - resize by 20%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 147 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, July 29, 2014

IN THE RAIN





Supplies needed:

I am using the amazing art from The Hunter for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Kizzed by Kelz called "In The Rain" which you can get by going here

Mask 52 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 18 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add

(Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 1

Select invert, delete

Select Close-up tube of choice and paste on top of paper and delete

Select none

Change tube to Overlay

Drop opacity down to 45%

Apply dropshadow and merge down on top of paper

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light

from left/top checked)

Move paper/tube below frame layer

Move paper below frame layer

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 25 - resize by 65%

Paste and position on top left

Select Element 92 - resize by 25%

Paste and position on top left

Select Element 91 - resize by 20%

Paste and position on top right

Select Element 68 - resize by 40%

Paste and position on right side

Select Element 19 - resize by 65%

Image mirror and paste on bottom left

Select Element 71 - resize by 25%

Paste and position on bottom left

Select Element 58 - resize by 50%

Paste and position on bottom left

Select Element 41 - resize by 20%

Paste and position on bottom left

Select Element 70 - resize by 25%

Paste and position on bottom

Select Element 46 - resize by 15%

Paste and position on bottom

Select Element 5 - resize by 25%

Paste and position on bottom right

Select Element 16 - resize by 20%

Paste and position on bottom right

Select Element 96 - resize by 22%

Paste and position on bottom right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 52 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, July 28, 2014

ART OF CALM





Supplies needed:

I am using the amazing artwork from Trinita for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from MellieBeans called "The Art of Calm which you can get by going here

Template 599 from Millie which you can find here

Mask 41 from Millie which you can find here

Plugins used: Xero - Bad Dream, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 650

Select Squares 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminance (Legacy)

Apply Xero - Bad Dream on settings of choice

Drop opacity down on tube to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original squares layer

Select Rectangle 6 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 5 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Element 3 - resize by

Paste and position on right above rectangle 3 layer

Drop opacity down to 55%

Select Square 2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Select Element 9 - resize by 55%

Image mirror and paste on bottom where desired

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 22%

Paste and position on top right

Select Element 4 - resize by 65%

Paste and position on left side

Select Element 23 - resize by 20%

Paste and position on bottom left

Select Element 24 - resize by 25%

Paste and position on bottom left

Select Element 25 - resize by 15%

Paste and position on bottom left

Select Element 22 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 28%

Paste and position on bottom right

Select Element 10 - resize by 12%

Paste and position on bottom right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 41 or mask of choice

Merge group and move to the bottom layer

Resize mask by 112%

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


MELANCHOLIA





Supplies needed:

I am using the amazing art from Enamorte for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Carpe Diem Designs called "Melancholia" which you can get by going here

Mask 22 from Moonbeams and Spiderwebs which you can find here

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Lace Frame 1 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 9

Select invert, delete

Select Close-up tube of choice and paste on top of paper and delete

Select none

Change tube to Luminance (Legacy)

Drop opacity down to 80%

Apply dropshadow and merge down on top of paper

Effects, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Move paper/tube below frame layer

Select Pluiesaphirs Element - resize by 35%

Paste and position on top right below frame layer

Move paper below frame layer

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Vine 1 Element - resize by 75%

Paste and position on top left

Select Bow2 Element - resize by 40%

Paste and position on top left

Select Cross 4 Element - resize by 65%

Image Free Rotate Left by 15% and paste on bottom left

Select Leaves Element - resize by 40%

Paste and position on bottom left

Select Accordian Flower Element - resize by 35%

Paste and position on bottom left

Select Bottle 1 Element - resize by 45%

Paste and position on bottom left

Select Scroll 3 Element - resize by 50%

Paste and position on bottom left

Select Flower 3 Element - resize by 30%

Paste and position on bottom left

Select Candle Element - resize by 30%

Paste and position on bottom

Select Old Key Element - resize by 40%

Image Free Rotate Left by 15% and paste on bottom

Select Candles Element - resize by 65%

Paste and position on right side below tube layer

Select Tag 2 Element - resize by 30%

Paste and position on bottom right

Select Flower 1 - resize by 40%

Paste and position on bottom right

Select Glass Element - resize by 45%

Paste and position on bottom right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 22 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, July 27, 2014

SAFARI EXPEDITION





Supplies needed:

I am using the amazing art from Very Many for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Safari Expedition" which you can get by going here

Mask 4 from ButterflyFlutterby which you can find here

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 9 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 16

Select invert, delete, select none

Move paper below frame layer

Select Element 111 - resize by 55%

Paste and position on top of frame where desired

Select Element 107 - resize by 20%

Paste and position on top right

Select Element 117 - resize by 20%

Paste and position on top where desired

Select Element 21 - resize by 22%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 66 - resize by 30%

Paste and position on bottom left

Select Element 73 - resize by 25%

Paste and position on bottom left

Select Element 103 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 20%

Paste and position on bottom left

Select Element 69 - resize by 18%

Paste and position on bottom left

Select Element 50 - resize by 15%

Paste and position on bottom left

Select Element 98 - resize by 15%

Paste and position on bottom left

Select Element 11 - resize by 20%

Paste and position on top left

Select Element 131 - resize by 22%

Paste and position on bottom

Sleect Element 86 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 36 - resize by 22%

Paste and position on bottom right

Select Element 55 - resize by 20%

Paste and position on bottom right

Select Element 15 - resize by 20%

Paste and position on bottom right

Select Element 148 - resize by 50%

Paste on canvas and move to bottom layer

Paste paper 28

Apply Mask 4 and merge group and move to bottom layer

Resize by 110%

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


WICKED WAYS





Supplies needed:

I am using the amazing artwork from Spazz for this tutorial which you can find here

Scrapkit: I am using a wicked matching kit from Whisper In the Wind called "Wicked" which you can get by going here

Wicked Template from Styelicious Twinky which you can find here

Mask 125 which you can find here. Not sure who created this mask but will provide credit once I find out.

Plugins used: Penta - Jeans, Xero - Bad Dream, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 25, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 500

Select Rectangle Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminance (Legacy)

Apply Xero - Bad Dream on settings of choice

Drop opacity down on tube to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Rectangle Raster 5 and repeat above steps

Select Shape Raster 4 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original shape layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 1 layer

Apply Penta - Jeans with the following settings:

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 30%

Paste and position on top right

Select Element 36 - resize by 15%

Paste and position on top right

Select Element 26 - resize by 25%

Image mirror and paste on top right

Select Element 51 - resize by 25%

Paste and position on bottom right

Select Element 74 - resize by 25%

Paste and position on bottom right

Select Element 64 - resize by 15%

Paste and position on bottom right

Select Element 48 - resize by 30%

Image Free Rotate Left by 15% and paste on left side where desired

Select Element 75 - resize by 22%

Paste and position on bottom left

Select Element 76 - resize by 25%

Paste and position on bottom left

Select Element 61 - resize by 12%

Paste and position on bottom left

Select Element 47 - resize by 25%

Paste and position on bottom left

Select Element 5 - resize by 20%

Paste and position on bottom left

Select Element 62 - resize by 25%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 125 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, July 24, 2014

JUNGLE FEVER





Supplies needed:

I am using the amazing art from Jose Cano for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Sophisticat Simone called "Jungle Fever" which you can get by going here

Mask 43 from Moonbeams and Spiderwebs which you can find here

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 75%
Select your magic wand tool and click in the center of each frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete, select none

Move paper layer below frame

Select your magic wand tool and click in the center of the Left Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Element 2 - resize by 80%

Select invert, delete, select none

Move Element below frame

Select your magic wand tool and click in the center of the top right frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Select Element 18 - resize by 75%

Select invert, delete, select none

Move Element below frame layer

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 23 - resize by 50%

Select Element 30 - resize by 75%

Paste and position in center below tube where desired

Paste and position on bottom below tube layer

Select Element 1 - resize by 50%

Paste and position on top left

Select Element 24 - resize by 22%

Paste and position on top center box

Select Element 13 - resize by 55%

Paste and position on bottom right

Select Element 7 - resize by 25%

Paste and position on bottom right

Select Element 41 - resize by 30%

Paste and position on bottom right

Select Element 40 - resize by 40%

Paste and position on bottom right

Select Element 21 - resize by 40%

Paste and position on bottom right below tube layer

Select Element 20 - resize by 45%

Paste and position on bottom left

Select Element 10 - resize by 25%

Paste and position on bottom left

Select Element 39 - resize by 40%

Paste and position on bottom left

Paste paper 1 on canvas

Apply Mask 43 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, July 23, 2014

LOVELY LAURA





Supplies needed:

I am using the amazing artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a beautiful from Bibi's Collections called "Tina Love" which you can get by going here

Template 73 from Drama Bomb Designs which you can find here

Mask 22 from Gina Gems which you can find here

Plugins used: Eyecandy 4000, HSB - Noise, - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 800 x 750

Select Square 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminance (Legacy)

Drop opacity down on tube to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Square 5 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Select none

Apply Eyecandy HSB Noise with the following settings:

Delete/Hide original square layer

Select Square 3 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 6 - resize by 55%

Paste and position on left side

Select Element 14 - resize by 30%

Paste and position on bottom left

Select Element 24 - resize by 38%

Paste and position on bottom left

Select Element 10 - resize by 30%

Paste and position on bottom left

Select Element 12 - resize by 40%

Paste and position on bottom left

Select Element 11 - resize by 30%

Paste and position on bottom left

Select Element 64 - resize by 30%

Paste and position on bottom left

Select Element 66 - resize by 40%

Paste and position on bottom left

Select Element 39 - resize by 22%

Paste and position on bottom left

Select Element 29 - resize by 45%

Paste and position on right side

Select Element 58 - resize by 40%

Paste and position on bottom right

Select Element 76 - resize by 35%

Paste and position on bottom right

Select Element 54 - resize by 45%

Paste and position on bottom right

Select Element 20 - resize by 40%

Paste and position on bottom right

Select Element 46 - resize by 30%

Paste and position on bottom right

Select Element 16 - resize by 40%

Paste and position on top right

Select Element 63 - resize by 75%

Paste and position on top right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Tuesday, July 22, 2014

SUNSHINE GIRL





Supplies needed:

I am using the amazing artwork from Arthur Crowe for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Wick3d Creationz called "Pixel Sun Girl" which you can get by going here OR here

Template 628 from Millie which you can find here

Mask 7 from Rieka Rafita which you can find here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 575

Select Wordart 12 layer

Add new raster layer and flood-fill with color of choice

Reselect wordart - select all, float, defloat

Go back and select layer you just filled - select invert, delete, select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Rectangle 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminance (Legacy)

Drop opacity down on tubes to 80%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Rectangles 8, 9 and 10 layers and repeat above steps

Select Square 7 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Square 6 layer and repeat above steps

Select Circle 5 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 27 - resize by 80%

Paste and position on top of circle layer

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 20%

Paste and position in the center behind tube layer

Select Element 1 - resize by 65%

Image Free Rotate Left by 15% and paste on top right

Select Element 9 - resize by 85%

Paste and position on bottom right

Select Element 8 - resize by 40%

Paste and position on bottom left

Select Element 12 - resize by 35%

Paste and position on bototm left

Select Element 6 - resize by 45%

Paste and position on bottom left

Select Element 4 - resize by 25%

Paste and position on bottom left

Select Element 18 - resize by 35%

Paste and position on bottom

Select Element 13 - resize by 7%

Paste and position on bottom

Select Element 17 - resize by 48%

Image Free Rotate Left by 15% and paste on top left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 7 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, July 20, 2014

APOCALYPSE





Supplies needed:

I am using the amazing artwork from Wendy Gerber for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Freek's Creations called "Apocalypse" which you can get by going here

Template 635 from Millie which you can find here

Mask 122 from Designs by Vaybs which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any

version will do).

This tutorial was written by me on July 20, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard

(SHIFT+D) duplicate the template as a new image. Close the original and

delete the copywrite layer.

Adjust canvas to 750 x 575

Select Square Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45,Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Luminance (Legacy)

Drop opacity down on tubes to 65%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Square 7 layer and repeat above steps

Select Stripes 6 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original stripes layer

Select Square 4 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Downed Wires Element and paste on top right above square 4 layer

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer and repeat above steps

Select Square 1 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Blood Splatter Element - paste and position on left side where desired

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Warning Sign Element - resize by 35%

Image Free Rotate Left by 15% and paste on top right

Select Handprint Element - resize by 25%

Paste and position on top right

Select Toxic Barrel Element - resize by 45%

Paste and position on bottom right

Select Skull Element - resize by 25%

Paste and position on bottom right

Select Virus Element - resize by 30%

Paste and position on bottom right

Select Chainsaw Element - resize by 45%

Paste and position on bottom right

Select Hand Element - resize by 25%

Paste and position on bottom right

Select Cupcake Element - resize by 25%

Paste and position on bottom right

Select Survival Kit Element - resize by 25%

Paste and position on bottom left

Select Gas Mask Element - resize by 25%

Paste and position on bottom left

Select Food Can Element - resize by 25%

Paste and position on bottom left

Select Ribs Element - resize by 22%

Image Free Roate Left by 15% and paste on bottom left

Select Lips Element - resize by 25%

Paste and position on bottom left

Select Bee Element - resize by 25%

Paste and position on top left

Select your text tool and apply or type any wording you prefer

Apply Eyecandy Gradient Glow to wording on fat default settings

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 122 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Friday, July 18, 2014

SAILOR DREAMS





Supplies needed:

I am using the amazing artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collection called "Sailor Dreams" which you can get by going here

Template 31 from Scrapity Scrap and More which you can find here

Exclusive Mask 1 from Witchys Heart which you can find on the Misfits Blog here

Plugins used: Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 500

Select Star Raster 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tube to Screen

Drop opacity down on tubes to 65%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original star layer

Select Shapes Raster 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original shapes layer

Select Half Circle Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, weave (Gap size 2, Width 6, Opacity 10, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original circle layer

Select Copy of Vector 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original layer

Select Strip Raster 4 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original strip layer

Select Copy of Vector 2 and Copy of Vector 1 layers and repeat same steps that you did did for Vector 3 layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle laye

Select Element 9 - resize by 50%

Paste and position on top center above rectangle layer

Select Rectangle Raster 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 114 - resize by 40%

Paste and position on top right

Image duplicate, mirror and reposition on left side where desired

Select Element 75 - resize by 22%

Paste and position on top right

Select Element 104 - resize by 75%

Paste and position on bottom below half circle layer

Select Element 81 - resize by 15%

Paste and position on bottom right

Select Element 61 - resize by 40%

Paste and position on bottom right

Select Element 89 - resize by 30%

Paste and position on bottom right

Select Element 73 - resize by 25%

Paste and position on bottom right

Select Element 2 - resize by 15%

Paste and position on bottom right

Select Element 47 - resize by 20%

Paste and position on bottom right

Select Element 72 - resize by 50%

Paste and position on top left

Select Element 62 - resize by 18%

Paste and position on bottom left

Select Element 113 - resize by 22%

Paste and position on bottom left

Select Element 108 - resize by 20%

Paste and position on bottom left

Sleect Element 7 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 25 - resize by 30%

Paste and position on bottom left

Select Element 45 - resize by 15%

Paste and position on bottom left

Select Element 13 - resize by 20%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, July 17, 2014

BLOOD LUST





Supplies needed:

I am using the amazing art from Designs by Norella for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissed by Kelz called "Blood Lust" which you can get by going here

Mask 179 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 59 and paste in the center of the canvas

Resize by 175%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 22

Select invert, delete, select none

Move paper below frame layer

Select Element 16 and past on bottom left side under frame layer

Change tube to Luminance (Legacy) and drop opacity down to 50%

Select Frame Element 87 - resize by 80%

Paste and position on bottom right

Image duplicate, mirror and reposition on top right under original frame

Select your magic wand tool and click in the center of your original frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with gradient of choice

Copy and paste close-up tube of choice on top of gradient layer

Select invert, delete, select none

Change close-up to Luminance (Legacy)

Merge tube down on gradient layer and drop down under frame

Select Frame copy and repeat above steps

Select Element 52 - resize by 55%

Paste and position on right side of small frames

Select Element 56 - resize by 40%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 127 - resize by 48%

Paste and position on top left

Select Element 104 - resize by 40%

Paste and position on bottom left

Select Element 47 - resize by 85%

Paste and position on bottom left

Select Element 141 - resize by 40%

Paste and position on bottom left

Select Element 120 - resize by 40%

Paste and position on bottom left

Select Element 82 - resize by 60%

Paste and position on bottom left

Select Element 140 - resize by 35%

Paste and position on bottom left

Select Element 54 - resize by 50%

Paste and position on bottom

Select Element 75 - resize by 40%

Paste adn position on bottom right

Select Element 150 - resize by 50%

Paste and position on bottom right

Select Element 78 - resize by 65%

Paste and position on bottom right

Add new raster layer and flood-fill with gradient of choice

Apply Mask 179 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, July 16, 2014

A 'LIL GOTH





Supplies needed:

I am using the amazing art from Anna Marine for for this tutorial which you can find here

Scrapkit: I am using a beautiufl kit from Mellie Beans called "A Lil Goth" which you can get by going here

Mask 3 from Melissaz Creationz which you can find here

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 16, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 11

Select invert, delete, select none

Move paper below frame layer

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 20%

Paste and position on bottom center of the frame

Select Element 7 - resize by 15%

Paste and position on top left on frame where desired

Image duplicate and mirror and repeat step to add element to bottom of frame if desired

Select Element 45 - resize by 15%

Paste and position on left side below frame layer

Image duplicate, mirror and reposition on bottom right where desired

Select Element 4 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 3 - resize by 25%

Paste and position on bottom left

Select Element 35 - resize by 20%

Paste and position on bottom left

Select Element 28 - resize by 25%

Paste and position on bottom left

Select Element 41 - resize by 12%

Paste and position on bottom right

Select Element 34 - resize by 30%

Paste and position on bottom right

Select Element 1 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 21 - resize by 15%

Paste and position on bottom right

Select Element 23 - resize by 15%

Paste and position on bottom right

Select Element 37 - resize by 22%

Paste and position on bottom right

Select Element 46 - resize by 15%

Paste and position on top left

Paste paper 12

Apply Mask 3 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ROLLER GIRL





Supplies needed:

I am using the amazing art from Scott Blair for for this tutorial. The tube is no longer for sale but you can view his artwork here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Roller Girl" which you can get by going here

Blinds Mask that I have uploaded here. I do not know who created this mask but if I find out I will appropriately link to them.

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 12 and paste in the center of the canvas

Resize by 72%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 8

Paste Paper 22

Select invert, delete

Select Element 89 (resize by 38%) and paste on left side of paper and delete

Select none

Apply dropshadow and merge down

Move paper below frame layer

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Element 106 - resize by 15%

Paste and position on top left where desired

Select Element 45 - resize by 25%

Paste and position on left side

Select Element 2 - resize by 25%

Paste and position on top right

Select Element 30 - resize by 25%

Paste and position on bottom right

Select Element 33 - resize by 25%

Paste and position on bottom right

Select Element 47 - resize by 22%

Paste and position on bottom right

Select Element 6 - resize by 20%

Paste and position on bottom right

Select Element 23 - resize by 15%

Paste and position on bottom right

Select Element 44 - resize by 25%

Paste and position on bottom right

Select Element 13 - resize by 20%

Paste and position on bottom below tube layer

Select Element 51 - resize by 15%

Paste and position on bottom

Select Element 10 - resize by 18%

Paste and position on bottom left

Select Element 12 - resize by 18%

Paste and postition on bottom left

Select Element 41 - resize by 25%

Paste and position on bottom left

Select Element 16 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 11 - resize by 15%

Paste and position on bottom left

Paste paper 6 on canvas

Apply Mask and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, July 15, 2014

PROFANITY LACED





Supplies needed:

I am using the amazing art from Zlata_M for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called Profanity Laced" which you can get by going here

Mask 236 from Weescottlass which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 90%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 8

Paste Smudged 1 Element - resize by 65%

Select invert, delete

Select Close-up tube of choice and paste on top of paper and delete

Select none

Change tube to Luminance (Legacy)

Drop opacity down to 50%

Apply dropshadow and merge down

Move paper/tube below frame layer

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Sconce Element - resize by 30%

Paste and position on right side of frame

Select LipstickKisses Element - resize by 50%

Paste and position on top right

Select Ribbon 3 Element - resize by 30%

Paste and position on bottom right

Select Flowers 2 Element - resize by 50%

Paste and position on bottom right (erase bottom of stem if it overhangs)

Select Flower 2 Element - resize by 22%

Paste and position on bottom right

Select TimeBomb Element - resize by 25%

Paste and position on bottom right

Select Teddy Element - resize by 25%

Paste and position on bottom right

Select Bottle Element - resize by 20%

Paste and position on bottom

Select Foilage1 Element - resize by 25%

Paste and position on bottom

Select Martini Element - resize by 25%

Paste and position on bottom

Select Goggles Element - resize by 25%

Image mirror and paste on the bottom

Select Lipstick Element - resize by 30%

Paste and position on bottom

Select Wordart 8 - resize by 40%

Paste and position on bottom

Select Brad1 Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Wordart 11 Element - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Apply Eyecandy Gradient Glow on medium default settings

Select Mask Element - resize by 75%

Paste on canvas and move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 236 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LAURA'S REALM





Supplies needed:

I am using the amazing artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Whisper in the Wind called "Laura's Realm" which you can get by going here

Template 241 from Toxic Desirez which you can find here

Folkvangar's Fantasy Background here

Mask Dmsk 0006 which you can find here

Plugins used: Eyecandy 4000 - Marble, VM - Transmission, Xero - Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 800 x 650

Select Circle 4 layer

Select all, float, defloat

Paste Folkvangar's Fantasy Background of choice

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change tubes to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tubes to 75%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Circle Raster 5 layer

Apply Eyecandy Marble with the following settings:

Select Circle Copy of Raster 5 and repeat marble settings

Select Rectangle Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, weave (Gap size 2, Width 6, Opacity 10, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original rectangle layer

Select Rectangle Copy of Raster 6 and repeat above steps

Select Rectangle Raster 7 layer

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Copy of Raster 7 layer and repeat above steps

Select Rectangle Raster 8 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 9 layer

Apply VM Transmission with the following settings:

Select Rectangle Copy of Raster 9 layer and repeat VM settings

Select Element 26 - resize by 75%

Paste and position on top center circle

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 40%

Paste and position on top left - colorize with following settings if desired:

Select Element 22 - resize by 40%

Paste and position on top left

Select Element 30 - resize by 25%

Paste and position on top left

Select Element 7 - resize by 30%

Paste and position on top right

Select Element 52 - resize by 25%

Paste and position on top right

Select Element 69 - resize by 20%

Paste and position on top right

Select Element 48 - resize by 30%

Paste and position on bottom right

Select Element 56 - resize by 20%

Paste and position on bottom right

Select Element 45 - resize by 20%

Paste and position on bottom right

Select Element 39 - resize by 35%

Paste and position on bottom right

Select Element 31 - resize by 15%

Paste and position on bottom right

Select Element 40 - resize by 20%

Paste and position on bottom right

Select Element 23 - resize by 25%

Paste and position on bottom left

Select Element 15 - resize by 22%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 18 - resize by 35%

Paste and position on bottom left

Select Element 4 - resize by 20%

Paste and position on bottom left

Select Element 19 - resize by 45%

Paste and position on bottom left

Select Element 43 - resize by 25%

Paste and position on bottom left

Select Element 46 - resize by 25%

Paste and position on bottom left

Select Element 47 - resize by 25%

Paste and position on bottom left

Select Element 38 - resize by 20%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 6 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, July 13, 2014

ENCHANTING





Supplies needed:

I am using the amazing artwork from DiHalm for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Sophisticat Simone called "Enchanting" which you can get by going here

Template 176 from HorsePlay's Pasture which you can find here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins used: Eyecandy 4000 - Marble, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 600

Select Lines Raster 14 layer and delete

Select Strips Raster 13 and 12 and delete

Select Circle Raster 11 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle Raster 9 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 7 layer

Apply Eyecandy Marble with the following settings:

Select Circle Raster 5 and repeat marble settings

Select Rectangle Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original rectangle layer

Select Rectangle Raster 1 and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 49 - resize by 30%

Paste and position on top right

Select Element 10 - resize by 50%

Paste and position on top right

Select Element 41 - resize by 50%

Paste and position on top right

Select Element 6 - resize by 50%

Paste and position on top left

Select Element 7 - resize by 45%

Paste and position on top left

Select Element 28 - resize by 35%

Image mirror and paste on top left

Select Element 42 - resize by 40%

Paste and position on bottom right

Select Element 2 - resize by 40%

Paste and position on bottom right

Select Element 4 - resize by 50%

Paste and position on bottom left

Select Element 29 - resize by 30%

Paste and position on bottom left

Select Element 52 - resize by 30%

Image mirror and paste on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Saturday, July 12, 2014

SUMMER MADNESS





Supplies needed:

I am using the amazing bonus artwork from Picsfordesign for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Backyard Summer" which you can get by going here

Template 607 from Millie which you can find here

Summer Mask 4 from Rabid Bunny which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero - Radiance, Xero - Bad Dream Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 12, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 550

Select Wordart Raster 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Wordart Raster 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Select none

Apply Eyecandy Glass on default settings

Delete/Hide original wordart layer

Select Circle 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tubes to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity down on tube to 75%

Apply dropshadow and merge close-up down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Circle 7 layer and repeat above steps

Select Circle 8 layer and repeat gradient steps

Select Circle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original circle layer

Select Circle 5 layer and repeat above steps

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circlde 3 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 2 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/hide original circle layer

Select Circle 1 and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 54 - resize by 85%

Paste and position on bottom below tube layer

Select Element 73 - paste and position on right side

Select Element 74 - resize by 35%

Paste and position on top right

Select Element 16 - resize by 35%

Paste and position on bottom right

Select Element 14 - resize by 25%

Paste and position on bottom right

Select Element 29 - resize by 25%

Paste and position on bottom right

Select Element 37 - resize by 25%

Paste and position on bottom right

Select Element 71 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 32 - resize by 50%

Paste and position on bottom left below tube layer

Select Element 31 - resize by 50%

Image mirror and paste on bottom left

Select Element 5 - resize by 40%

Paste and position on bottom left

Select Element 17 - resize by 30%

Paste and position on bottom left

Select Element 72 - resize by 30%

Paste and position on bottom left

Select Element 39 - resize by 30%

Image mirror and paste on top left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Friday, July 11, 2014

ROCKIN CUTIE





Supplies needed:

I am using the amazing artwork from DiHalm a stunning matching kit from Bibi's Collections called "Rokeritos". You can get the tube and mini match here

Template 66 from Drama Bomb Designs which you can find here

Mask 242 from Trese which you can find here

Plugins used: Penta - Jeans, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 500

Select Shape 15 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original shape layer

Select Shape 14 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Jeans with the following settings:

Delete/Hide original shape layer

Select Circle 13 layer

Select all, float, defloat

Paste spotlight paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 11 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/hide original circle layer

Select Circle 5 and repeat above steps

Select Circle 8 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 2 layer and repeat above steps

Select Element 24 - resize by 65%

Paste and position on right side - image duplicate and mirror

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 22 - resize by 50%

Paste and position on top left

Select Element 3 - resize by 10%

Paste and position on top left

Select Element 50 - resize by 50%

Paste and position on top right

Select Element 17 - resize by 40%

Paste and position on bottom right

Select Element 6 - resize by 85%

Paste and position on bottom right

Select Element 10 - resize by 55%

Image mirror and paste on bottom right

Select Element 48 - resize by 50%

Paste and position on bottom left

Select Element 46 - resize by 30%

Paste and position on bottom left

Select Element 53 - resize by

Paste and position on bottom left

Select Element 55 - resize by 30%

Image mirror and paste on bottom left

Select Element 49 - resize by 45%

Paste and position on bottom left

Select Element 30 - resize by 35%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 242 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, July 10, 2014

MOMENT IN TIME





Supplies needed:

I am using the amazing art from Angela Newman for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Chili Designz called "Tiny Moments 7" which you can get by going here

Mask 113 from Trese which you can find here

Plugins: Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 7 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 8

Paste paper 8

Select invert, delete

Paste close-up tube of choice on top of paper layer and delete, select none

Change close-up to Luminance (Legacy) and drop opacity down to 50%

Apply dropshadow and merge close-up down on top of paper layer

Move paper layer below frame

Select Chandalier Element - resize by 35%

Paste and position on top center where desired

Paste tube of choice where desired

Apply Xero Radiance with the default settings of choice

Apply Lokas 3D Shadow at default settings

Select Necklace 2 Element - resize by 50%

Paste and position on top right

Select Leaves 4 Element - resize by 40%

Paste and position on bottom left

Select Clock Element - resize by 50%

Paste and position on bottom left

Select Chair Element - resize by 40%

Paste and position on bottom left

Select Keys Element - resize by 30%

Paste and position on bottom left

Select Doll Element - resize by 30%

Paste and position on bottom left

Select Butterfly Element - resize by 50%

Paste and position on top left

Select Apple Element - resize by 40%

Paste and position on bottom right

Select Bottle Element - resize by 40%

Paste and position on bottom right

Select Flower 3 Element - resize by 25%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 113 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif