I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo SCDblnk_byangelsdesignz.gif
 photo PPPBlinkie2_zps90ae120a.gif
 photo KKfan_byevolangel_zpsyiycjybi.gif

Blog Archive

Facebook

Sunday, August 31, 2014

STEAMPUNK VAMPIRE





Supplies needed:

I am using the amazing art from Danny Lee for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Kissing Kate called "Steampunk Vampire" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 31, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Hard Light and drop opactiy down to 65%

Merge down on paper layer

Move paper below frame

Select Element 13 - resize by 35%

Paste and position on top right

Paste and position on top left

Select Element 57 - resize by 30%

Paste and position on top left

Select Element 27 - resize by 22%

Paste and position on top left

Select Element 15 - resize by 15%

Paste and position on top left

Image duplicate and resize by 80%

Reposition on top left where desired

Select Element 30 - resize by 25%

Paste and position on top right

Select Element 18 - resize by 40%

Paste and position on bottom left

Select Element 21 - resize by 40%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 50%

Paste and position on bottom left

Select Element 22 - resize by 20%

Paste and position on bottom left

Select Element 17 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 41 - resize by 20%

Paste and position on bottom left

Select Element 49 - resize by 40%

Paste and position on bottom left

Select Element 23 - resize by 15%

Paste and position on bottom left

Select Element 12 - resize by 20%

Paste and position on bottom left

Select Element 34 - resize by 25%

Paste and position on bottom

Select Element 16 - resize by 25%

Paste and position on bottom left

Select Element 11 - resize by 20%

Paste and position on bottom left

Select Element 59 - resize by 20%

Paste and position on bottom right

Select Element 56 - resize by 30%

Paste adn position on bottom right

Select Element 63 - resize by 22%

Paste and position on bottom right

Select Element 2 - resize by 20%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask and merge group - move to bottom layer

Add new raster layer and flood-fill with color of choice

Apply Mask 20 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, August 29, 2014

GLAMOROUS AMELIA



Supplies needed:

I am using the amazing art from Spazz for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Whisper In the Wind called "Amelia" which you can get by going here

Floral Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 17 and paste in the center of the canvas

Resize by 85%

Select Element 23- resize by 20%

Paste and position on top left

Image duplicate and mirror

Select Element 36 - resize by 40%

Paste and position in the center of canvas

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 48 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 73 - resize by 22%

Paste and position on bottom right

Select Element 25 - resize by 12%

Paste and position on bottom right

Select Element 7 - resize by 20%

Paste and position on bottom right

Select Element 13 - resize by 9%

Paste and position on bottom right

Select Element 27 - resize by 15%

Paste and position on bottom right

Select Element 14 - resize by 15%

Paste and position on bottom right

Select Element 69 - resize by 25%

Paste and position on bottom

Select Element 76 - resize by 15%

Paste and position on bottom

Select Element 52 - resize by 15%

Paste and position on bottom

Select Element 78 - resize by 10%

Paste and position on bottom

Select Element 80 - resize by 20%

Paste and position on bottom left

Select Element 34 - resize by 20%

Paste and position on bottom left

Select Element 39 - resize by 15%

Paste and position on bottom left

Select Element 30 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 32 - resize by 25%

Paste and position on bottom left

Select Element 15 - resize by 30%

Paste and position on bottom left

Select Element 90 - resize by 30%

Paste and position on left side

Add new raster layer and flood-fill with gradient of choice

Apply Floral Mask 4 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, August 27, 2014

GOTHIC SKULL




Supplies needed:

I am using the amazing art from Anna Marine for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Gothic Ashley" which you can get by going here

Mask 134 from Designs by Vaybs which you can find here

Plugins: Alien Skin Xenofex 2, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 27, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 and paste in the center of the canvas

Resize by 90%

Select your magic wand tool and click in the center of the window frames (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame

Select Element 67 - resize by 105%

Paste and position on center of the canvas

Image Free Rotate Right by 15%

Apply Xenofex 2 Burnt Edges with the following settings:

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 4 - resize by 30%

Paste and position on top left

Select Element 25 - resize by 40%

Paste and position on bottom left

Select Element 30 - resize by 25%

Paste and position on bottom left

Select Element 38 - resize by 25%

Paste adn position on bottom left

Select Element 19 - resize by 35%

Paste and positon on bottom left

Select Element 6 - resize by 15%

Paste and position on bottom left

Select Element 44 - resize by 30%

Paste and position on bottom left

Select Element 65 - resize by 35%

Paste and position on bottom left

Select Element 13 - resize by 30%

Paste and position on bottom

Select Element 42 - resize by 35%

Paste and position on bottom right

Select Element 16 - resize by 30%

Image mirror and paste on bottom right

Select Element 27 - resize by 25%

Paste and position on bottom right

Select Element 9 - resize by 25%

Paste and position on bottom right

Paste paper 8

Apply Mask 134 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, August 26, 2014

PURPLE STEAMPUNK




Supplies needed:

I am using the amazing art from Danny Lee for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Bibi's Collections called "Purple Steam" which you can get by going here

Mask 22 from Becky which you can find here

Mask 291 from Trese which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 67 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper below frame

Select Element 66 - resize by 25%

Paste and position on top right

Image duplicate and mirror

Select Element 31 - resize by 65%

Paste and position on bottom of frame

Select Element 71 - resize by 25%

Paste and position on bottom right

Select Element 27 - resize by 45%

Paste and position on bottom left

Select Element 72 - resize by 15%

Image Free Rotate Left by 15% and paste on left side

Select Element 47 - resize by 30%

Paste and position on bottom center of frame

Select Element 94 - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Select Element 8 - resize by 75%

Paste and position on canvas where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 40%

Paste and position on bottom right

Select Element 11 - resize by 30%

Paste and position on bottom right

Select Element 26 - resize by 55%

Paste and position on bottom right

Select Element 19 - resize by 35%

Paste and position on bottom

Select Element 4 - resize by 20%

Paste and position on bottom

Select Element 25 - resize by 20%

Paste and position on bottom left

Select Element 81 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 6 - resize by 20%

Paste and position on bottom left

Select Element 2 - resize by 25%

Paste and position on bottom left

Select Element 64 - resize by 15%

Paste and position on bottom left

Paste paper 8

Apply Mask 291 and merge group - move to bottom layer

Add new raster layer and flood-fill with color of choice

Apply Mask 22 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

EVOL CARNEY



Supplies needed:

I am using the amazing art from Enys Guerrero for for this tutorial which you can find here

Scrapkit: I am using an awesome from Freek's Creation called "Evol Carney" which you can get by going here

Halloween Mask from Vix which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Roller Coaster Element and paste in the center of the canvas

Resize by 80% and move to top of canvase

Select Tent Element and paste in the center of the canvas

Select Strength Game Element - resize by 65%

Paste and position on left side behind tent element

Select Ticket Booth Element - resize by 65%

Paste and position on right side

Select Entrance Element - resize by 55%

Paste and position in the bottom center above tent element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Balloons Element - resize by 40%

Paste and position on top right

Select Clown Cluster Element - resize by 22%

Paste and position on bottom right above booth element

Select Poster Element - resize by 15%

Image Free Rotate Right by 15% and paste on top of booth element

Select Megaphone Element - resize by 25%

Paste and position on bottom right

Select Tickets Element - resize by 25%

Paste and position on bottom right

Select Clown Element - resize by 35%

Paste and position on bottom right

Select Top Hat Element - resize by 25%

Paste and position on bottom

Select Pumpkin Element - resize by 30%

Paste and position on bottom where above entrance element

Select Milk Bottles Element - resize by 30%

Paste and position on bottom left

Select Lion Element - resize by 35%

Paste and position on bottom left

Select Flower Element - resize by 25%

Paste and position on bottom left

Select Word Art 2 Element - resize by 80%

Paste and position on top where desired

Paste paper 5 on canvas

Apply Mask 2 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, August 25, 2014

THE NILE




Supplies needed:
I am using the amazing art from Zlata_M for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Sophisticat Simone called "The Nile" which you can get by going here

Mask 22 from Gina Gems which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 25, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 775 x 700 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Resize by 90%

Select Element 48 - resize by 75%

Paste and position in the center of canvas above frame element

Select Element 2 - resize by 25%

Paste and position on bottom

Select Element 52 - resize by 35%

Paste and position on bottom

Select Element 24 - resize by 28%

Image mirror and paste on bottom above table element

Paste tube of choice where desired

Apply Xero - Radiance on default setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 48%

Paste and position on bottom right

Image duplicate and mirror

Select Element 61 - resize by 25%

Paste and position on bottom left

Image duplicate and mirror

Select Element 65 - resize by 25%

Paste and position on bottom rigth

Image duplicate and mirror

Select Element 21 - resize by 20%

Paste and position on bottom right

Select Element 49 - resize by 45%

Paste and position on bottom right

Select Element 14 - resize by 40%

Paste and position on bottom right

Select Element 60 - resize by 15%

Paste and position on bottom right

Select Element 12 - resize by 30%

Paste and position on bottom right

Select Element 25 - resize by 30%

Paste and position on bottom left

Select Element 50 - resize by 40%

Paste and position on bottom left

Select Element 20 - resize by 35%

Paste and position on bottom left

Select Element 47 - resize by 65%

Paste and position on top left

Select Element 46 - resize by 32%

Image Free Rotate Left by 15% and paste on top right

Paste paper 11

Apply Mask 22 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, August 24, 2014

Autumn Winds




Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Whisper In the Wind called "Autumn Winds" which you can get by going here

Floral Mask 2 from Dee which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 70%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper below frame

Select Element 79 - resize by 55%

Paste and position on right side

Select Element 48 - resize by 30%

Image mirror and paste on top right

Select Element 82 - resize by 65%

Select Element 81 - resize by 40%

Paste and position on bottom left

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 5 - resize by 20%

Paste and position on bottom left

Select Element 73 - resize by 20%

Paste and position on bottom left

Select Element 88 - resize by 15%

Paste and position on bottom left

Select Element 44 - resize by 20%

Paste and position on bottom left

Select Element 13 - resize by 20%

Paste and position on bottom left

Select Element 17 - resize by 15%

Paste and position on bottom left

Select Element 66 - resize by 15%

Paste and position on bottom left

Select Element 39 - resize by 15%

Paste and position on bottom left

Select Element 36 - resize by 10%

Paste and position on bottom

Select Element 93 - resize by 20%

Paste and position on bottom right

Select Element 68 - resize by 15%

Paste and position on bottom right

Select Element 31 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 63 - resize by 20%

Paste and position on bottom right

Select Element 90 - resize by 15%

Paste and position on bottom right

Select Element 50 - resize by 15%

Paste and position on bottom right

Select Element 35 - resize by 15%

Image Free Rotate Right by 15% and paste on top right

Select Element 49 - resize by 10%

Paste and position on top left

Select Element 6 - resize by 20%

Paste and position on top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 22 - resize by 55%

Paste and position on center left where desired

Add new raster layer and flood-fill with color of choice

Apply Mask 2 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, August 23, 2014

VAMPIRE BRIDE




Supplies needed:

I am using the amazing art from Pandora Creations for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Vampire Bride" which you can get by going here

Mask 179 from Insatiable Dreams which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the each Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 19

Select invert, delete, select none

Move paper below frame

Select Element 143 - resize by 22%

Paste and position on top left of paper

Colorize with the following settings if desired:

Select Element 4 - resize by 25%

Paste and position on top left above paper layer

Select Element 15 - resize by 25%

Paste and position on left side of paper layer

Select Element 142 - resize by 25%

Paste and position on bottom left above paper layer

Select Element 123 - resize by 20%

Paste and position on bottom left above paper layer

Select Element 178 - resize by 25%

Paste and position on top left above frame

Image duplicate, mirror

Select Frames Element 19 - resize by 5%

Paste and position on top right where desired

Image duplicate and repositon frame copy on bottom right where desired

Select your magic wand tool and click in the center of the original Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Add new raster layer and flood-fill with color or gradient of choice (style, Angle 45, Repeat 0)

Add Close-up tube of choice and paste on top of gradient layer

Select invert, delete, select none

Apply Xero Radiance on default setting of choice

Change close-up to Luminace (Legacy) and drop opactiy down to 60%

Merge close-up down onto gradient layer

Effect, Texture Effects, Blinds (Width 2, Opacity 15, Horizontal and Light from left/top checked)

Move gradient/tube layer below frame

Select Copy of Frame Element and repeat above steps

Select Element 33 - resize by 15%

Paste and position in the center between circle frames

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 158 - resize by 35%

Paste and position on bottom right side of frame

Image duplicate, mirror and paste on top left

Select Element 50 - resize by 25%

Paste and position on bottom right

Select Element 43 - resize by 20%

Paste and position on bottom right

Select Element 36 - resize by 15%

Paste and position on bottom right

Select Element 37 - resize by 15%

Paste and position on bottom right

Select Element 58 - resize by 10%

Paste and position on bottom right

Select Element 149 - resize by 10%

Paste and position on bottom right

Select Element 12 - resize by 18%

Paste and position on bottom right

Select Element 14 - resize by 30%

Paste and position on bottom

Select Element 156 - resize by 15%

Paste and position on left side

Select Element 27 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 65 - resize by 30%

Paste and position on bottom left

Select Element 73 - resize by 10%

Paste and position on bottom left

Select Element 42 - resize by 22%

Paste and position on bottom left

Select Element 25 - resize by 20%

Paste and position on bottom left

Select Element 41 - resize by 20%

Paste and position on bottom left

Select Element 55 - resize by 15%

Paste and position on bottom left

Select Element 31 - resize by 20%

Paste and position on bottom left

Select Element 181 - resize by 18%

Paste and position on top where desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Add new raster layer and flood-fill with color of choice

Apply Mask 179 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, August 22, 2014

RISE AND SHINE





Supplies needed:

I am using the amazing art from Feeline for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "Rise and Shine" which you can get by going here

Mask 37 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Cluster 3 Element and paste in the center of the canvas

Resize by 80%

Select Frames Element - resize by 55%

Paste and position on top right where desired

Select your magic wand tool and click in the center of the each Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice (style, Angle 45, Repeat 0)

Add Close-up tubes of choice and paste on top of gradient layer

Select invert, delete, select none

Change close-ups to Luminace (Legacy) and drop opactiy down to 75%

Merge close-ups down onto gradient layer

Move gradient/tubes layer below frame

Select Cloud Element - resize by 50%

Image Free Rotate Right by 15% and paste on top right

Select Sun Element - resize by 30%

Paste and position on top right and drop opacity down to 80%

Select Butterfly Element - resize by 20%

Image mirror and paste on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Grass Element - resize by

Paste and position on bottom below tube layer

Select Ribbon 3 - resize by 45%

Paste and position in the center of canvas below tube layer

Select Clock Element - resize by 35%

Paste and position on bottom left

Select Pillow Element - resize by 25%

Paste and position on bottom left

Select Sands of Time Element - resize by 25%

Paste and position on bottom left

Select Flower 2 Element - resize by 30%

Paste and position on bottom left

Select Newspaper Element - resize by 25%

Paste and position on bottom left

Select Coffee Element - resize by 20%

Paste and position on bottom left

Select Flowers 2 Element - resize by 25%

Paste and position on right side of the frame where desired

Select Little Bug Element - resize by 40%

Paste and position on right side

Select Books Element - resize by 20%

Paste and position on bottom right

Select Flower 4 Element - resize by 22%

Paste and position on bottom right

Select Heart Element - resize by 55%

Image Free Rotate Right by 15% and paste on bottom right

Select Pencils Element - resize by 25%

Paste and position on bottom right

Select Muffin Element - resize by 22%

Paste and position on bottom right

Select Thread Element - resize by 25%

Paste and position on bottom right

Select EggShells Element - resize by 25%

Image mirror and paste on bottom right

Select WA7 Element - resize by 45%

Paste and position on bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Add new raster layer and flood-fill with color of choice

Apply Mask 37 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, August 21, 2014

SCHOOL IS IN




Supplies needed:

I am using the amazing artwork from Ismael Rac for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Sophisticat Simone called "School Is In" which you can get by going here or here

You can also find her awesome matching animation here

Collab Template from Missy and Rosey which you can find here

Mask 242 from Trese which you can find here

Plugins used: VM Extravaganza - Transmission, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 550

Select Square Frame Raster 9 layer

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Add Close-up tube of choice and paste on top of frame layer

Select invert, delete, select none

Change tube to Luminance (Legacy) and drop opacity down to 70%

Move below frame layer

Select Rectangle Raster 5 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 12 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Square Raster 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply VM Transmission with the following settings:

Delete/Hide original square layer

Select Rectangle Raster 1 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 8 layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Raster 2 layer

Select all, float, defloat

Paste paper 19

Select invert, delete, select none

Delete/Hide original circle layer

Select Square Raster 10 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original square layer

Select Bottom Left Copy of Square Raster 10 and repeat above steps

Select Top Left Copy of Square Raster 10 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original square layer

Select Bottom Right Square layer and repeat above steps

Select Circle Raster 13 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/Hide original circle layer

Select Circle Copy of Raster 13 and repeat above steps

Select Rectangle Raster 11 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 14 layer

Select all, float, defloat

Paste paper 22

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 21 - resize by 35%

Paste and position on top left

Select Element 8 - resize by 50%

Paste and position on bottom left

Select Element 47 - resize by 40%

Paste and position on bottom left

Select Element 35 - resize by 25%

Paste and position on bottom left

Select Element 3 - resize by 28%

Paste and position on bottom left

Select Element 30 - resize by 40%

Paste and position on bottom left

Select Element 6 - resize by 30%

Paste and position on bottom

Select Element 39 - resize by 15%

Paste and position on bottom

Select Element 14 - resize by 35%

Paste and position on bottom right

Select Element 20 - resize by 30%

Paste and position on bottom right

Select Element 27 - resize by 20%

Paste and position on bottom right

Select Element 37 - resize by 40%

Paste and position on bottom right

Select Element 9 - resize by 25%

Paste and position on bottom right

Select Element 26 - resize by 30%

Paste and position on top right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 242 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!



STEAMPUNK ALICE





Supplies needed:

I am using the amazing art from Designs by Norella for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Steampunk" which you can get by going here

Mask 54 from Millie which you can find here

Mask 291 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 20, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 108 and paste in the center of the canvas

Resize by 45%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 1

Select invert, delete

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Luminace (Legacy) and drop opactiy down to 55%

Merge down on paper layer

Move paper below frame

Select Element 125 - resize by 35%

Paste and position on left side below frame

Select Element 90 - resize by 40%

Paste and position on top right

Select Element 62 - paste and position on left side of frame

Select Element 32 - resize by 25%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 140 - resize by 65%

Image mirror and paste on bottom left

Select Element 19 - resize by 25%

Paste and position on bottom left

Select Element 131 - resize by 25%

Paste and position on bottom left

Select Element 80 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 30 - resize by 25%

Paste and position on bottom left

Select Element 12 - resize by 40%

Paste and position on bottom left

Select Element 36 - resize by 50%

Paste and position on bottom

Select Element 13 - resize by 30%

Paste and position on bottom

Select Element 126 - resize by 22%

Image mirror, flip and reposition on bottom right

Select Element 9 - resize by 80%

Paste and position on bottom right

Select Element 26 - resize by 30%

Paste and position on bottom right

Select Element 7 - resize by 30%

Paste and position on bottom right

Select Element 70 - resize by 55%

Paste and position on bottom

Select Element 89 - resize by 60%

Paste and position on bottom

Add new raster layer and flood-fill with color of choice

Apply Mask 54 and merge group - move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 291 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, August 18, 2014

VOODOO VICKY




Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Whisper in the Wind called "Voodoo Vicky" which you can get by going here

Mask 34 from Gina Gems which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 80%

Select your magic wand tool and click in the center of the Frame (Add

(Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 5

Select invert, delete,

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Overlay and merge down on paper layer

Move paper below frame

Select Element 8 - resize by 45%

Paste and position on right side of frame

Select Element 41 - resize by 55%

Paste and position on top left

Select Element 81 - resize by 15%

Paste and position on left side of frame

Image duplicate, mirror

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 30%

Paste and position on bottom right

Select Element 2 - resize by 18%

Paste and position on bottom right

Select Element 77 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 86 - resize by 25%

Paste and position on bottom left

Select Element 69 - resize by 25%

Paste and position on left side

Select Element 35 - resize by 40%

Paste and position on bottom left

Select Element 9 - resize by 30%

Paste and position on bottom left

Select Element 19 - resize by 15%

Paste and position on bottom

Select Element 84 - resize by 15%

Paste and position on bottom

Select Element 38 - resize by 10%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 34 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

GRAVEYARD TEA PARTY





Supplies needed:

I am using the amazing art from Lady Mishka for for this tutorial which is included in the kit I used from Pink Paradox Productions.

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Graveyard Tea Party" which you can get by going here

Mask which you can find here. Not sure where this mask came from but will credit if I find out.

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 12 and paste in the center of the canvas

Resize by 70%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 28

Select invert, delete, select none

Move paper below frame

Select Element 114 - resize by 48%

Paste and position on left side of frame

Select Element 70 - resize by 25%

Paste and position on top left

Select Element 65 - resize by 30%

Paste and position on top right

Select Element 135 - resize by 20%

Paste and position on top right

Select Element 117 - resize by 25%

Paste and position on center paper where desired

Select Element 7 - resize by 40%

Paste and position on center paper where desired

Select Element 124 - resize by 40%

Paste and position on bottom where desired

Select Element 161 - resize by 20%

Paste and position on top left below stairs

Select Element 82 - resize by 22%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 137 - resize by 30%

Paste and position on bottom right

Select Element 89 - resize by 30%

Paste and position on bottom right

Select Element 43 - resize by 20%

Paste and position on bottom right

Select Element 52 - resize by 20%

Image mirror and paste on bottom right

Select Element 27 - resize by 15%

Paste and position on bottom right

Select Element 130 - resize by 10%

Paste and position on bottom right

Select Element 30 - resize by 12%

Paste and position on bottom right

Select Element 131 - resize by 10%

Paste and position on bottom right

Select Element 73 - resize by 20%

Paste and position on left side above stairs

Select Element 77 - resize by 15%

Paste and position on bottom left

Select Element 26 - resize by 15%

Paste and position on bottom left

Select Element 44 - resize by 13%

Paste and position on bottom left

Select Element 46 - resize by 15%

Paste and position on bottom left

Select Element 53 - resize by 12%

Paste and position on bottom left

Select Element 164 - resize by 10%

Paste and position on top where desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Paste paper 23

Apply Mask and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, August 17, 2014

HULA HAVEN




Supplies needed:

I am using the amazing artwork from Alex Prihodko for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Wick3d Creationz called "Hula Haven" which you can get by going here

Template 639 from Millie which you can find here

Mask 22 from Gina Gems which you can find here

Plugins used: Penta - Jeans, Xero - Radiance, Eyecandy 4000 - Marble, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 550

Select Rectangle 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Add Close-up tube of choice and paste on top of gradient layer

Select invert, delete, select none

Change close-up to Luminance Legacy and drop opacity down to 75%

Apply dropshadow and merge down on top of gradient

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Rectangle 10 layer and repeat above steps

Select Rectangle 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Penta - Jeans with the following settings:

Delete/Hide original rectangle layer

Select Rectangle 8 and repeat above steps

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/Hide original rectangle layer

Select Circle 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 4 and repeat above steps

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 2 layer

Apply Eyecandy Marble with the following settings:

Delete/Hide original rectangle layer

Select Rectangle 1 and repeat above steps

Select Element 20 - resize by 50%

Image mirror and paste on bottom center

Select Element 17 - resize by 110%

Paste and position on bottom

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 24 - resize by 45%

Image Free Rotate Left by 15% and paste on top left

Select Element 19 - resize by 40%

Image Free Rotate Right by 15% and paste on top left

Select Element 10 - resize by 18%

Paste and position on top left

Select Element 6 - resize by 25%

Paste and position on top right

Select Element 7 - resize by 22%

Paste and position on right side

Select Element 1 - resize by 20%

Paste and position on bottom right

Select Element 2 - resize by 25%

Paste and position on bottom right

Select Element 9 - resize by 20%

Paste and position on bottom right

Select Element 27 - resize by 20%

Paste and position on bottom right

Select Element 12 - resize by 15%

Paste and position on bottom right

Select Element 8 - resize by 30%

Paste and position on bottom left

Select Element 25 - resize by 25%

Paste and position on bottom left

Select Element 16 - resize by 12%

Paste and position on bottom left

Selct Element 5 - resize by 20%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Friday, August 15, 2014

PRACTICE SAFE HEX





Supplies needed:

I am using the amazing artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from MellieBeans called "Witchy" which you can get by going here

Halloween Template from Leah which you can find here

Mask 25 from Witchyheart which you can find on the Misfits Blog here

Plugins used: Xero - Radiance, Eyecandy 4000 - Marble, Eyecandy 4000 - HSB Noise, Eyecandy 4000 - Glass, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 500

Select Words 1 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Select Words 1 back layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original back layer

Select Words 2 layer and repeat above steps - add Eyecandy Glass on default settings if desired

Select Circle 1 layer

Apply Eyecandy Marble with the following settings:

Apply Eyecandy Glass on default settings

Select Circle 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Luminance Legacy and drop opacity down to 25%

Select Circle 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply HSB Noise with the following settings:

Delete/Hide original circle layer

Select Circle 4 and repeat above steps

Select Element 1 - resize by 23%

Paste and position on top of circle 3 layer

Select Rectangle 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 6 layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 8 and repeat above steps

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 9

Apply Eyecandy Marble with the following settings:

Select Rectangle 10 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Apply VM Tranmission with the following settings:

Delete/Hide original rectangle layer

Select Rectangle 11 layer

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Select Rectangle 12 and repeat weave settings

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 11 - resize by 55%

Paste and position on top left

Select Element 16 - resize by 25%

Paste and position on bottom left

Select Element 25 - resize by 15%

Paste and position on bottom left

Select Element 20 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 17 - resize by 15%

Paste and position on bottom left

Select Element 6 - resize by 40%

Image Free Rotate Left by 15% and paste on left side

Select Element 23 - resize by 10%

Paste and position on bottom left

Select Element 13 - resize by 15%

Paste and position on bottom left

Select Element 21 - resize by 30%

Paste and position on bottom right

Select Element 27 - resize by 20%

Paste and position on bottom right

Select Element 4 - resize by 25%

Paste and position on bottom right

Select Element 9 - resize by 22%

Paste and position on top right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 25 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, August 14, 2014

VAMPIRE HEARTS





Supplies needed:

I am using the amazing art from The Hunter for for this tutorial which you can find here

Scrapkit: I am using a wicked kit from Carpe Diem called "Vampire Hearts" which you can get by going here

Mask 180 from Insatiable Dreams which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 and paste in the center of the canvas

Resize by 90%

Image Free Rotate Left by 15%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 7

Select invert, delete, select none

Move paper below frame

Select Frame 6 - resize by 45%

Paste and position on left side where desired

Image duplicate, mirror and reposition on bottom left under original frame

Select your magic wand tool and click in the center of your original top frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with gradient of choice

Copy and paste close-up tube of choice on top of gradient layer

Select invert, delete, select none

Change close-up to Screen

Drop opactity down to 80%

Merge tube down on gradient layer and drop down under frame

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Select Frame copy and repeat above steps

Select Dark Twine Element - resize by 40%

Image mirror and paste in the center of both circle frames

Select Cherry Blossom 1 Element - resize by 50%

Image mirror and paste on top right of frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Coffin 1 Element - resize by 80%

Paste and position on bottom right

Select Vamp Mouth Element - resize by 65%

Paste and position on bottom right

Select Hearts Element - resize by 50%

Paste and position on bottom right

Select Brad 2 Element - paste and position on bottom right

Select Flower 3 Element - resize by 30%

Paste and position on bottom right

Select Winged Skull Element - resize by 55%

Paste and position on top right

Select Spiked Heart Element - resize by 50%

Paste and position on bottom

Select Candle 1 Element - paste and position on bottom

Select Wordart1 Element - resize by 25%

Image Free Rotate Right by 15% and paste on bottom

Select Blood Glass Element - resize by 40%

Paste and position on bottom

Select Clock Element - resize by 80%

Paste and position on bottom left

Select Flower 2 Element - resize by 30%

Image mirror and paste on bottom left

Select Flower 1 - resize by 25%

Paste and position on bottom left

Select Barbed Wire Element - resize by 65%

Paste and position on bottom

Select Wordart 3 - resize by 55%

Paste and position on top left

Apply Eyecandy Gradient Glow on fat default settings

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 180 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

KIMONO





Supplies needed:

I am using the amazing art from Andy Cooper for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Bibi's Collections called "Kimono" which you can get by going here

Mask 276 from Weescotlass which you can find here

Plugins: Penta - Color dot, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 80 and paste in the center of the canvas

Resize by 55%

Select Element 32 - resize by 75%

Paste and position in the center below element 80

Select Element 15 - resize by 35%

Paste and position on top right

Select Element 71 - resize by 65%

Paste and position on right side

Select Element 104 - resize by 45%

Paste and position in the center of screen element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 23 - resize by 40%

Paste and position on bottom right

Select Element 22 - resize by 35%

Paste and position on bottom right

Select Element 67 - resize by 25%

Paste and position on bottom right

Select Element 58 - resize by 35%

Paste and position on bottom right

Select Element 91 - resize by 15%

Paste and position on bottom right

Select Element 72 - resize by 16%

Paste and position on top left

Select Element 81 - resize by 50%

Paste and position on bottom left

Select Element 60 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 82 - resize by 30%

Paste and position on bottom left

Select Element 9 - resize by 20%

Paste and position on bottom

Select Element 49 - resize by 20%

Paste and position on bottom left

Select Element 63 - resize by 30%

Paste and position on bottom left

Select Element 1 - resize by 15%

Paste and position on bottom left

Select Element 29 - resize by 35%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 276 and merge group and move to bottom layer

Apply Penta Colordot with the following settings:

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, August 12, 2014

NIGHTSHADE




Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Freeks Creations called "Nightshade" which you can get by going here

Mask 32 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 12, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 2 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 3

Select invert, delete, select none

Move paper below frame

Select Smoke Element - resize by 50%

Paste and position on bottom below frame layer

Select Butterfly Element - resize by 45%

Paste and position on top left

Select Branch - resize by 40%

Paste and position on top right

Paste tube of choice where desired

Apply Xero Radiance on default setting of choice

Apply Lokas 3D Shadow at default settings

Select Cross Element - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Candle Element - resize by 35%

Paste and position on bottom left

Select Clock Element - resize by 25%

Paste and position on bottom right

Select Books Element - resize by 35%

Paste and position on bottom right

Select Drink Element - resize by 17%

Paste and position on bottom right

Select Hourglass Element - resize by 30%

Paste and position on bottom right

Select Flower 2 Element - resize by 25%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 32 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BELLA'S GOTHIC STYLE





Supplies needed:

I am using the amazing art from Pandora Creations for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Disturbed Scraps called "Bellas Goth Style" which you can get by going here

Mask 248 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 12, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 88 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the 2 left sqaures and 2 right squares of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Paper 2

Select invert, delete, select none

Move paper below frame

With your magic wand again select the 2 center squares of the frame

Selections, Modify, Expand by 5

Paste Paper 14

Select invert, delete, select none

Move paper below frame

Select Element 34 - resize by 40%

Paste and position on top right

Select Element 48 - resize by 45%

Paste and position on top left

Select Element 22 - resize by 30%

Paste and position on top center of frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 33 - resize by 75%

Paste and position on left side of frame

Select Element 54 - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Select Element 2 - resize by 40%

Paste and position on right side

Select Element 66 - resize by 40%

Image mirror and paste on bottom left

Select Element 7 - resize by 25%

Paste and position on left side on chair element

Select Element 5 - resize by 45%

Paste and position on bottom left

Select Element 4 - resize by 35%

Paste and position on bottom left

Select Element 71 - resize by 15%

Paste and position on bottom left

Select Element 29 - resize by 25%

Paste and position on bottom left

Select Element 80 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 25 - resize by 40%

Paste and position on bottom right

Select Element 60 - resize by 40%

Paste and position on bottom right

Select Element 1 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 51 - resize by 25%

Paste and position on bottom right

Select Element 30 - resize by 30%

Paste and position on bottom right

Select Element 32 - resize by 25%

Paste and position on bottom right
Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 248 and merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif