I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Tuesday, September 30, 2014

VOODOO LOVE





Supplies needed:

I am using the amazing artwork from Wendy Gerber for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Carpe Diem Designs called "Voodoo Doll" which you can get by going here

Template 155 from Horseplay's Pasture Designs which you can find here

Mask 119 from Designs by Vaybs which you can find here

Plugins used: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 700 x 600

Select Rectangle Raster 11 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle Raster 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Add Close-up tube of choice and paste on top of gradient layer

Select invert, delete, select none

Change close-up to Luminance Legacy and drop opacity down to 80%

Apply Xero Bad Dream on default setting of choice

Apply dropshadow and merge tube down on top of gradient

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Frame 1 Element and paste on top of circle layer

Select Circle Raster 9 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Select Rectangle Raster 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original rectangle layer

Select Rectangle Raster 7 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/hide original rectangle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Tag 1 Element - resize by 50%

Paste and position on top right

Select Knoted Ribbon Element - resize by 75%

Paste and position on top right

Select Castle Element - resize by 65%

Image mirror and paste on bottom right

Select Medallion Element - resize by 25%

Paste and position on bottom right

Select Gravestone Element - resize by 30%

Paste and position on bottom right

Select Greenery 2 Element - resize by 50%

Paste and position on bottom right

Select Bottle Element - resize by 65%

Paste and position on bottom right

Select Envelope Element - resize by 30%

Image Free Rotate Left by 15% and paste on bottom right

Select Flower 1 Element - resize by 25%

Paste and position on bottom right

Select Orchids Element - resize by 60%

Image Free Rotate Left by 15% and paste on bottom left

Select Heart 3 - resize by 65%

Image Free Rotate Right by 15% and paste on bottom left

Select Brad1 - resize by 75%

Paste and position on bottom left

Select Butterfly1 Element - resize by 45%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 119 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, September 28, 2014

TRICKS & TREATS





Supplies needed:

I am using the amazing art from Graphfreaks for for this tutorial whice you can find here

Scrapkit: I am using a stunning kit from Whisper in the Wind called "Tricks & Treats" which you can get by going here

Mask 126 from Trese here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 27 and paste in the center of the canvas

Resize by 90%

Select Frame 1 Element and paste on canvas - resize by 80%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper below frame

Select Frame Element 90 - resize by 70%

Paste and position on canvas and move under circle frame

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Select Frame Element 2 - resize by 75%

Paste and position on top of canvas

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 50%

Paste and position on bottom right

Select Element 59 - resize by 40%

Paste and position on left side

Select Element 81 - resize by 40%

Paste and position on top left

Select Element 54 - resize by 22%

Paste and position on bottom left

Select Element 56 - resize by 25%

Paste and position on bottom left

Select Element 18 - resize by 20%

Paste and position on bottom left

Select Element 45 - resize by 15%

Paste and position on bottom left

Select Element 48 - resize by 25%

Paste and position on bottom left

Select Element 26 - resize by 12%

Paste and position on bottom left

Select Element 88 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 66 - resize by 25%

Paste and position on bottom right

Select Element 70 - resize by 10%

Paste and position on bottom right

Select Element 65 - resize by 35%

Paste and position on bottom right

Select Element 71 - resize by 15%

Paste and position on bottom right

Select Element 82 - resize by 25%

Paste and position on top right

Select Element 63 - resize by 45%

Paste and position on top below tube layer

Select Element 14 - resize by 50%

Paste and position on top right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 126 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, September 26, 2014

KICKS AND CASHMERE





Supplies needed:

I am using the amazing art from Verymany for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Kicks & Cashmere" which you can get by going here

Mask 113 from Trese here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 9 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Screen - drop opacity down to 80%

Apply dropshadow and merge down on paper layer

Move paper below frame

Select Frame Element 13 - resize by 30%

Paste and position on top right

Duplicate frame and move copy on bottom right where desired

Reselect Original top right frame

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice

Paste Close-up of choice on top of gradient layer

Select invert, delete, select none

Change close-up to Luminance (Legacy)

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Move paper below frame

Select copy of bottom frame

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Select Element 164 - resize by 20%

Paste and position in the middle of frames

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 151 - resize by 50%

Paste and position on left side of frame

Select Element 162 - resize by 40%

Paste and position on top left

Select Element 80 - resize by 30%

Paste and position on bottom left

Select Element 89 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 66 - resize by 22%

Paste and position on bottom left

Select Element 145 - resize by 15%

Paste and position on bottom left

Select Element 56 - resize by 15%

Paste and position on bottom left

Select Element 72 - resize by 15%

Paste and position on bottom left

Select Element 39 - resize by 15%

Paste and position on left side on top of speaker element

Select Element 37 - resize by 20%

Paste and position on left side above speaker element

Select Element 31 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 150 - resize by 15%

Paste and position on right side

Select Element 104 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 63 - resize by 22%

Paste and position on bottom right

Select Element 88 - resize by 15%

Paste and position on bottom right

Select Element 48 - resize by 15%

Paste and position on bottom right

Select Element 45 - resize by 20%

Paste and position on bottom right

Select Element 83 - resize by 25%

Paste and position on bottom right

Select Element 90 - resize by 12%

Paste and position on bottom right

Select Element 36 - resize by 20%

Paste and position on bottom right

Select Element 2 - resize by 20%

Paste and position on bottom right

Select Element 134 - resize by 15%

Paste and position on bottom right

Select Element 32 - resize by 20%

Paste and position on top right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 113 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, September 24, 2014

SEXIEST WITCH




Supplies needed:

I am using the amazing artwork from ViNina for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collection called "Salem" which you can get by going here

Template 676 from Millie which you can find here

Halloween Mask from Kylie which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 600

Select Wordart 9 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Apply Gradient Glow on fat default settings (glow width 3)

Delete/Hide original wordart layer

Select Wordart 8 layer

Add new raster and flood-fill with color of choice

Reselect wordart layer

Select all, float, defloat

Go back and select the color layer you just filled

Select invert, delete, select none

Apply Eyecandy Gradient Glow on Medium default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Square 7 layer

Select all, float, defloat

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Element 96 - resize by 60%

Paste and position on the center of the canvas

Select Square 6 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Shape 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original shape layer

Select Shape 4 and repeat above steps

Select Square 3 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Select Square 2 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 and repeat above steps

Select Element 39 - resize by 50%

Image mirror and paste on bottom left below wordart

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 65 - resize by 30%

Paste and position on top right

Select Element 95 - resize by 25%

Paste and position on bottom right

Select Element 74 - resize by

Paste and position on bottom right

Select Element 60 - resize by 20%

Paste and position on bottom right

Select Element 29 - resize by 25%

Paste and position on bottom right

Select Element 7 - resize by 25%

Paste and position on bottom right

Select Element 75 - paste and position on top left

Select Element 88 - resize by 40%

Paste and position on bottom left

Select Element 27 - resize by 40%

Paste and position on bottom left

Select Element 6 - resize by 50%

Paste and position on bottom left

Select Element 36 - resize by 30%

Paste and position on bottom left

Select Element 66 - resize by 40%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, September 21, 2014

GOTHICAL AUTUMN





Supplies needed:

I am using the amazing art from Sweet-PinUp for for this tutorial which is no longer available. You can find the artist here

Scrapkit: I am using a stunning kit from MMeliCrea Designz called "Gothical Autumn" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 5 and paste in the center of the canvas

Select Frame Element 8 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame

Select Element 64 - resize by 40%

Paste and position on top of the frame

Select Frame Element 4 - resize by 50%

Paste and position on right side

Select your magic wand tool and click in the center of each square (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste tube(s) of choice where desired and delete

Select none

Change close-up(s) to Luminance (Legacy)

Merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Move paper below frame

Select Element 48 - resize by 55%

Paste and position in the center of the frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 39 - resize by 25%

Paste and position on top left

Select Element 58 - resize by 30%

Image mirror and paste on top right

Select Element 60 - resize by 50%

Paste and position on left side

Select Element 9 - resize by 25%

Paste and position on bottom left

Select Element 71 - resize by 30%

Paste and position on bottom left

Select Element 75 - resize by 20%

Paste and position on bottom left

Select Element 9 - resize by 15%

Paste and position on bottom left

Select Element 50 - resize by 30%

Paste and position on bottom right

Select Element 22 - resize by 25%

Paste and position on bottom right

Select Element 61 - resize by 40%

Saturday, September 20, 2014

GIRLS WANNA HAVE FUN





Supplies needed:

I am using the amazing artwork from Wendy Gerber for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Whisper In the Wind called "Julia" which you can get by going here

Template 682 from Millie which you can find here

Mask 21 from Gina Gems which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 20, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 600

Select Wordart 7 layer

Add new raster layer and flood-fill with color of choice

Reselect wordart layer

Select all, float, defloat

Go back and select the color layer you just filled

Select invert, delete, select none

Apply Eyecandy Gradient Glow on Medium default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Wordart 6 layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Delete/Hide original wordart layer

Select Rectangle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (style, Angle 45, Repeat 2)

Add Close-up tubes of choice and paste on top of gradient layer

Select invert, delete, select none

Change close-ups to Luminance Legacy and drop opacity down to 75%

Apply Xero Bad Dream on default setting of choice

Apply dropshadow and merge tubes down on top of gradient

Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Square 4 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Square 2 layer and repeat above steps

Select Circle 3 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 76 - resize by 85%

Paste and position in the center of canvas above circle layer

Select Element 79 - resize by 30%

Paste and position on top left

Select Element 13 - resize by 30%

Paste and position on right side

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 38 - resize by 25%

Paste and position on top left

Select Element 43 - resize by 20%

Paste and position on bottom left

Select Element 89 - resize by 15%

Paste and position on bottom left

Select Element 39 - resize by 12%

Paste and position on bottom left

Select Element 31 - resize by 20%

Paste and position on bottom left

Select Element 63 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 57 - resize by 20%

Paste and position on bottom

Select Element 37 - resize by 25%

Paste and position on bottom

Select Element 3 - resize by 6%

Paste and position on bottom

Select Element 94 - resize by 20%

Paste and position on bottom

Select Element 96 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 45 - resize by 15%

Paste and position on bottom right

Select Element 35 - resize by 20%

Paste and position on bottom right

Select Element 48 - resize by 12%

Paste and position on bottom right

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 21 mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, September 18, 2014

EMO LOVE




Supplies needed:

I am using the amazing artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning kit from MellieBeans called "Emo Love" which you can get by going here

Template 378 from Missy which you can find here

Mask 16 from Gina Gems which you can find here

Plugins used: VM Extravaganza - Transmission, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 650

Select Heart 1 & 2 layers

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Square 3 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Element 25 - resize by 80%

Paste and position on top of circle layers

Select Sqaure 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Select Thin Rectangle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply VM Transmission with the following settings:

Delete/Hide original rectangle layer

Select Square 5 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original square layer

Select Square 4 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 20%

Paste and position on top right

Select Element 21 - resize by 30%

Paste and position on top right

Select Element 26 - resize by 18%

Paste and position on right side

Select Element 35 - resize by 30%

Paste and position on bottom right

Select Element 12 - resize by 25%

Paste and position on bottom right

Select Element 14 - resize by 22%

Paste and position on top left

Select Element 42 - resize by 20%

Paste and position on left side

Select Element 23 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 43 - resize by 25%

Paste and position on bottom left

Select Element 17 - resize by 20%

Paste and position on bottom left

Select Element 9 - resize by 22%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 34 - resize by 20%

Paste and position on bottom left

Select Element 7 - resize by 30%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 16 mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, September 17, 2014

WITCHING HOUR




Supplies needed:

I am using the amazing artwork from Jessica Dougherty for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Halloweenie" which you can get by going here

Template from Stylelicious Twinky which you can find here

Mask 1 from Melissaz Creationz which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Eyecandy 4000 - Glass, Xero - Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 550

Select Wordart Raster 9 layer

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Square Raster 7 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Element 14 - resize by 85%

Paste and position in the center of canvas

Apply Gradient Glow with fat default settings

Select Square Raster 6 layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 5 layer and repeat above steps

Select Circle 4 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Raster 3 layer and repeat above steps

Select Square Raster 2 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 1 layer and repeat above steps

Select Oval Raster 8 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original oval layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 55 - resize by 65%

Paste and position on right side

Select Element 60 - resize by 25%

Paste and position on right side

Select Element 9 - resize by 30%

Image mirror and paste on top left

Select Element 47 - resize by 50%

Select Element 43 - resize by 25%

Paste and position on top left

Select Element 40 - resize by 40%

Paste and position on bottom right

Select Element 49 - resize by 55%

Paste and position on bottom right below wordart

Select Element 27 - resize by 40%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 24 - resize by 50%

Paste and position on bottom right

Select Element 46 - resize by 20%

Paste and position on bottom

Select Element 42 - resize by 20%

Paste and position on bottom

Paste and position on right side below wordart

Select Element 48 - resize by 35%

Paste and position on bottom left below wordart

Select Element 52 - resize by 40%

Paste and position on bottom left below wordart

Select Element 23 - resize by 55%

Paste and position on bottom left

Select Element 28 - resize by 35%

Paste and position on bottom left

Select Element 44 - resize by 25%

Paste and position on bottom left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, September 14, 2014

SASSY STEAMPUNK




 Supplies needed:

I am using the amazing art from Feeline for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from MMeliCrea Designz called "Steampunk" which you can get by going here

Mask 122 from Bitzy Beez Designz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 and paste in the center of the canvas

I shifted in over to the right about an inch

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Luminance (Legacy)

Merge down on paper layer

Move paper below frame

Select Element 74 - resize by 55%

Paste and position on top right

Select Element 78 - resize by 20%

Paste and position right side where desired

Select Element 24 - resize by 25%

Paste and position on bottom right

Select Element 41 - resize by 20%

Paste and position on bottom right

Select Element 49 - resize by 28%

Image mirror and paste on bottom right

Select Element 65 - resize by 22%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 28 - resize by 30%

Paste and position on bottom right

Select Mask Element - resize by 55%

Paste and position on bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 55 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 72 - resize by 20%

Paste and position on bottom left

Select Element 64 - resize by 15%

Paste and position on bottom left

Select Element 62 - resize by 20%

Paste and postion on bottom left

Select Element 44 - resize by 50%

Paste and position on bottom left

Select Element 35 - resize by 20%

Image Free Rotate Left by 15% and paste on top left

Select Element 1 - resize by 85%

Paste and position on canvas and move to bottom layer

Apply Mask 122 - merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, September 13, 2014

CAMP BLOOD





Supplies needed:

I am using the amazing art from Ed Mironiuk for for this tutorial which you can find here

Scrapkit: I am using a wicked kit from Creative Scraps by Crys called "Camp Blood" which you can get by going here

Mask 111 from Designs by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 21 and paste in the center of the canvas

Resize by 70%

Select Element 18- resize by 95%

Paste and position on bottom

Select Element 20 - resize by 40%

Paste and position on bottom left

Select Element 3 - resize by 45%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 12 - paste and position on bottom

Select Element 23 - resize by 40%

Image mirror and paste on bottom left

Select Element 5 - resize by 40%

Paste and position on bottom left

Select Element 22 - resize by 25%

Paste and postion on bottom left

Select Element 2 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 4 - resize by 20%

Paste and position on bottom left

Select Element 13 - resize by 20%

Paste and position on bottom

Select Element 35 - resize by 35%

Paste and position on bottom right

Select Element 7 - resize by 30%

Paste and position on bottom right

Select Element 37 - resize by 20%

Paste and position on bottom right

Select Element 33 - resize by 35%

Paste and position on top right

Select Element 32 - paste and position on the center of canvas and move to bottom layer

Paste paper 1 on canvas

Apply Mask 111 - merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, September 12, 2014

GRECCA





Supplies needed:

I am using the amazing art from Toriya for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Bibi's Collection called "Grecca" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 12, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 2 - resize by 65%

Paste and position on canvas

Select Frame Element 95 and paste in the center of the canvas

Resize by 55%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete, select none

Change paper to Overlay

Move paper below frame

Select Element 66 - resize by 10%

Paste and position on right side of paper layer

Select Element 73 - resize by 22%

Paste and position on top right of paper

Select Element 134 - resize by 15%

Paste and position on bottom left above paper

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 33 - resize by 30%

Paste and position on left side

Select Element 43 - resize by 30%

Paste and position on left side

Select Element 104 - resize by 20%

Paste and position on bottom left

Select Element 8 - resize by 22%

Paste and position on bottom left

Select Element 100 - resize by 18%

Paste and position on bottom left

Select Element 128 - resize by 30%

Paste and position on bottom left

Select Element 120 - resize by 25%

Paste and position on bottom left

Select Element 141 - resize by 40%

Paste and position on bottom right

Select Element 96 - resize by 35%

Image mirror paste and position on right side

Select Element 109 - resize by 40%

Paste and position on bottom right

Select Element 93 - resize by 15%

Paste and position on bottom right

Select Element 46 - resize by 35%

Paste and position on bottom right

Select Element 44 - resize by 24%

Paste and position on bottom right

Select Element 38 - resize by 25%

Paste and position on top right

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, September 11, 2014

RUBBER BLACK




Supplies needed:

I am using the amazing art from Andy Cooper for for this tutorial which you can find here

Scrapkit: I am using a stunning matching kit from Whisper In the Wind called "Rubber Black" which you can get by going here

Mask 29 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 11, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 54 - resize by 75%

Paste and position on the center of the canvas

Select Frame Element 1 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper below frame

Select Element 80 - resize by 55%

Paste and position on right side

Select Element 73 - resize by 20%

Paste and position on top right

Select Element 46 - resize by 65%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 66 - resize by 15%

Paste and position on bottom right

Select Element 51 - resize by 25%

Paste and position on bottom right

Select Element 108 - resize by 25%

Paste and postion on bottom right

Select Element 64 - resize by 10%

Paste and position on bottom right

Select Element 85 - resize by 8%

Paste and position on bottom right

Select Element 22 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 9 - resize by 30%

Paste and position on bottom right

Select Element 100 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 90 - resize by 20%

Paste and position on bottom left

Select Element 21 - resize by 20%

Paste and position on bottom left

Select Element 75 - resize by 15%

Paste and position on bottom left

Add new raster layer and flood-fill with color of choice

Select Element 43 - resize by 12%

Paste and position on bottom left

Select Element 113 - paste and position on top where desired

Apply Mask 29 - merge group and move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, September 10, 2014

ROMANTIQUE WITCH





Supplies needed:

I am using the amazing art from Very many for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Pink Paradox Productions called "Vampire Romantique - Silver" which you can get by going here

Sparkle Mask from Witchysheart which you can find on the Misfit Blog here

Mask 1 from Kissing Kate which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 7 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame

Select Element 99 - resize by 43%

Paste and position on top of paper layer

Select Element 128 - resize by 20%

Paste and position on top right

Layers duplicate and mirror

Select Element 13 - resize by 30%

Paste and position on top center above frame

Select Element 149 - resize by 22%

Paste and position on top of frame

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 12 - resize by 10%

Paste and position on center left where desired

Layers duplicate and mirror

Select Element 152 - resize by 75%

Paste and position on left side where desired

Erase any overhanging bits on element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 25%

Paste and position on top left

Select Element 124 - resize by 25%

Image mirror and psate on bottom left

Select Element 28 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 36 - resize by 20%

Paste and position on bottom left

Select Element 55 - resize by 20%

Paste and position on bottom left

Select Element 70 - resize by 10%

Paste and position on bottom left

Select Element 61 - resize by 20%

Paste and position on bottom left

Select Element 46 - resize by 45%

Paste and position on bottom right

Select Element 59 - resize by 25%

Paste and position on bottom right

Select Element 52 - resize by 20%

Paste and position on bottom right

Select Element 49 - resize by 20%

Paste and position on bottom right

Select Element 44 - resize by 15%

Paste and position on bottom right

Select Element 3 - resize by 15%

Paste and position on bottom right

Select Element 25 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom right

Add new raster layer and flood-fill with color of choice

Apply Witchyheart mask, merge group and move to bottom layer

Paste paper 7

Apply Mask 1 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, September 8, 2014

LIGHT ANGEL




Supplies needed:

I am using the amazing art from Pandora Creations for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Pink Paradox Productions called "Beautiful Angel" which you can get by going here

Mask from Kissing Kate which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 8, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 60%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper below frame

Select Element 112 - resize by 65%

Paste and position on top of frame

Select Frame Element 8 - resize by 22%

Paste and position on top right

Select Element 108 - resize by 55%

Paste and position on right side

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 2

Paste paper 18

Select invert, delete

Add Close-up tube of choice and paste on top of paper layer

Delete, select none

Change close-up to Burn and drop opacity down to 65%

Merge down on top of paper

Move paper below frame

Select Element 129 - resize by 18%

Paste and position on top left

Layers duplicate and mirror

Select Element 116 - resize by 30%

Image Free Rotate Left by 15% and paste on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 86 - resize by 45%

Paste and position on left side

Select Element 34 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 80 - resize by 20%

Image mirror and paste on bottom left

Select Element 52 - resize by 15%

Paste and position bottom left

Select Element 12 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 59 - resize by 20%

Paste and position on bottom left

Select Element 65 - resize by 20%

Paste and position on bottom right

Select Element 33 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 73 - resize by 15%

Paste and position on bottom right

Select Element 72 - resize by 18%

Paste and position on bottom right

Select Element 74 - resize by 15%

Paste and position on bottom right

Select Element 68 - resize by 15%

Paste and position on bottom right

Select Element 44 - resize by 25%

Paste and position on bottom

Select Element 131 - resize by 15%

Paste and position on bottom

Select Element 27 - resize by 25%

Paste and position on bottom right

Paste paper 8

Apply Mask and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, September 7, 2014

ANGEL WITH AN ADDY





Supplies needed:

I am using the amazing art from Danny Lee for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching collab kit from Bibi's Collection called "Dark Angel" which you can get by going here

Mask from Kissing Kate which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 7, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 48 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame

Select Element 31 and paste on top of lace element

Resize by 65%

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 40%

Paste and position on top left

Select Element 62 - resize by 65%

Paste and position on bottom right

Select Element 1 - resize by 20%

Paste and position on bottom right

Select Element 56 - resize by 25%

Paste and position on bottom right

Select Element 29 - resize by 40%

Paste and position on bottom right

Select Element 33 - resize by 25%

Paste and position on bottom right

Select Element 59 - resize by 30%

Paste and position on bottom right

Select Element 17 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 42 - resize by 25%

Paste and position on bottom left

Select Element 25 - resize by 30%

Paste and position on bottom left

Select Element 26 - resize by 15%

Paste and position on bottom left

Select Element 36 - resize by 20%

Paste and position on bottom left

Select Element 24 - paste and position on bottom left

Select Element 30

Paste and position on top left and move to bottom layer

Layers duplicate, mirror and flip

Paste paper 11 on canvas

Apply Mask and merge group - move to bottom layer

Add new raster layer and flood-fill with color of choice

Apply Mask 20 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, September 6, 2014

TRICK OR TREAT




Supplies needed:

I am using an Exclusive artwork from Picsfordesign for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Wick3d Creationz called "When Death Had No Name" which you can get by going here

Template 636 from Millie which you can find here

Mask 1 from Vix which you can find here

Plugins used: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 5, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 600

Select Square 9 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original square layer

Select Squares 7 and 8 and repeat above steps

Select Rectangle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply VM Transmission with the following settings:

Delete/Hide original rectangle layer

Select Square 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 5, Opacity 10, Fill gaps checked, change Gap and Weave color to one of choice)

Delete/Hide original square layer

Select Square 4 layer and repeat above steps

Select Square 3 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original square layer

Select Element 22 - resize by 53%

Paste and position on top center of square 3 where desired

Select Element 20 - resize by 50%

Paste and position on right side where desired

Select Circle 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 25%

Paste and position on bottom left

Select Element 4 - resize by 22%

Paste and position on bottom left

Select Element 9 - resize by 20%

Paste and position on bottom left

Select Element 16 - resize by 15%

Paste and position on bottom right

Select Element 17 - resize by 20%

Paste and position on bottom right

Select Element 5 - resize by 20%

Paste and position on bottom right

Select Element 15 - resize by 20%

Paste and position on bottom right

Select Element 13 - resize by 60%

Paste and position on top where desired

Select Element 12 - resize by 30%

Paste and position on top left

Select new raster layer and flood fill with color or gradient of choice

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, September 4, 2014

MAGICAL MESS



Supplies needed:

I am using the amazing art from Alex Prihodko for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Sophisticat Simone called "Magic Mess" which you can get by going here

Mask 3 from Kissing Kate which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 4, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Image Free Rotate Left by 5% and move to the top of the canvas

Layers duplicate, mirror and move toward the bottom of canvas

Select your magic wand tool and click in the center of the original Frame Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete, select none

Move paper below frame

Repeat steps for duplicate frame

Select Element 41 - resize by 65%

Paste and position on left side

Select Element 24 - resize by 35%

Paste and position on left side above tree element (erase any overhanging bits)

Select Element 17 - resize by 65%

Paste and position on top where desired below tube layer

Apply Eyecandy Gradient Glow on fat default settings

Select Element 51 - resize by 50%

Image Free Rotate Right by 10% and paste on bottom left

Select Element 64 - resize by 50%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 30%

Paste and position on bottom left

Select Element 11 - resize by 55%

Paste and position on bottom left

Select Element 35 - resize by 30%

Paste and position on bottom left

Select Element 43 - resize by 25%

Image mirror and paste on bottom left

Select Element 72 - resize by 30%

Paste and position on bottom left

Select Element 56 - resize by 55%

Paste and position on bottom left

Select Element 3 - resize by 55%

Paste and position on bottom left

Select Element 7 - resize by 30%

Paste and position on bottom right

Select Element 9 - resize by 50%

Paste and position on bottom right

Select Element 14 - resize by 25%

Paste and position on bottom right

Select Element 1 - resize by 30%

Paste and position on bottom right

Select Element 16 - resize by 22%

Paste and position on bottom right

Select Element 38 - resize by 35%

Paste and position on right side

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 3 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

COME AUTUMN





Supplies needed:

I am using the amazing art from Anna Marine for for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from MellieBeans called "Come Autumn" which you can get by going here

Fall Mask from Tonya which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 4, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 28 and paste in the center of the canvas

Resize by 80%

Select your magic wand tool and click in the center of the Frame Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper below frame

Select Element 47 - resize by 55%

Paste and position on of canvas

Select Element 48 - resize by 40%

Paste and position on top left

Select Element 44 - resize by 20%

Image Free Rotate Right by 15% and paste on top right
Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 50 - resize by 15%

Paste and position on left side

Select Element 46 - resize by 20%

Paste and position on bottom left

Select Element 26 - resize by 35%

Paste and position on bottom left

Select Element 15 - resize by 20%

Paste and position on bottom

Select Element 23 - resize by 20%

Paste and position on bottom

Select Element 31 - resize by 25%

Paste and position on bottom right

Select Element 4 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 21 - resize by 25%

Paste and position on bottom right

Select Element 33 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 11 - resize by 15%

Paste and position on bottom right

Select Element 32 - resize by 30%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Fall Mask and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, September 3, 2014

DIA DE LOS MUERTOS





Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Autumn Gothique" which you can get by going here

Mask 275 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 3, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 10 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 23

Select invert, delete, select none

Move paper below frame

Select Element 31 - resize by 22%

Paste and position on top left below frame layer

Select Element 94 - resize by 35%

Image mirror and paste on bottom left below frame

Select Element 49 - resize by 25%

Paste and position on top left

Select Element 4 - resize by 25%

Paste and position on left side below frame

Select Element 158 - resize by 30%

Paste and position on top left

Image duplicate and mirror - reposition on top right

Select Element 157 - resize by 15%

Paste and position on top left

Image duplicate and mirror - reposition on top right

Select Element 89 - resize by 20%

Paste and position on left side

Image duplicate and mirror on right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 1 - resize by 30%

Paste and position on bottom left

Select Element 55 - resize by 15%

Paste and position on bottom left

Select Element 85 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 90 - resize by 18%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 63 - resize by 25%

Paste and position on bottom left

Select Element 99 - resize by 20%

Image mirror and paste on bottom left

Select Element 77 - resize by 12%

Paste and position on bottom left

Select Element 161 - resize by 12%

Paste and position on bottom left

Select Element 46 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom

Select Element 38 - resize by 20%

Paste and position on bottom

Select Element 163 - resize by 10%

Paste and position on bottom

Select Element 119 - resize by 20%

Paste and position on bottom

Select Element 92 - resize by 25%

Paste and position on bottom right

Select Element 25 - resize by 50%

Paste and position on bottom right

Select Element 8 - resize by 12%

Paste and position on bottom right

Select Element 103 - resize by 25%

Paste and position on bottom right

Select Element 73 - resize by 15%

Paste and position on bottom right

Select Element 93 - resize by 20%

Paste and postion on bottom right

Select Element 75 - resize by 15%

Paste and position on bottom

Select Element 13 - resize by 25%

Paste and position on top right

Paste paper 40 on canvas

Apply Mask 275 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, September 2, 2014

MOONIEL





Supplies needed:

I am using the amazing art from Pandora Creations for for this tutorial which you can find here

Scrapkit: I am using a beautiful matching kit from Disturbed Scraps called "Mooniel" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 2, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 68 and paste in the center of the canvas

Resize by 75%

Select Element 65 - resize by 80%

Paste and position on top of canvas

Select Element 73 - resize by 60%

Paste and position on top of frame

Select Element 43 - resize by 40%

Paste and position on top center

Select Element 19 - resize by 55%

Paste and position on right side

Select Element 31 - resize by 65%

Paste and position on bottom

Select Element 56 - resize by 22%

Paste and position on bottom right

Select Element 44 - resize by 30%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 20%

Paste and position on bottom right

Select Element 13 - resize by 30%

Paste and position on bottom right

Select Element 50 - resize by 30%

Paste and position on bottom right

Select Element 18 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 46 - resize by 25%

Paste and position on bottom left

Select Element 51 - resize by 25%

Paste and position on bottom left

Select Element 45 - resize by 25%

Paste and position on bottom left

Select Element 10 - resize by 35%

Paste and position on top left

Paste paper 13

Apply Mask 20 and merge group - move to bottom layer

Add any additional elements you like.

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif