I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo PPPBlinkie2_zps90ae120a.gif
 photo KKfan_byevolangel_zpsyiycjybi.gif

Facebook

Thursday, April 30, 2015

POLICE GIRL




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Police" which you can get by going here

Mask 13 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste close-up tube of choice on top of paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity

Apply dropshadow and merge close-up down on paper

Move paper below frame

Select Frame Element 1 - resize by 65%

Paste and position on the center of the canvas

Select Element 7 - resize by 35%

Paste and position on top right

Select Element 14 - resize by 50%

Paste and position towards the bottom of the frame

Select Element 49 - resize by 40%

Paste and position on the bottom of the frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 64 - resize by 35%

Paste and position on bottom right

Select Element 31 - resize by 25%

Paste and position on bottom right

Select Element 21 - resize by 15%

Paste and position on bottom right

Select Element 28 - resize by 25%

Paste and postion on bottom right

Select Element 37 - resize by 25%

Paste and position on bottom right

Select Element 4 - resize by 15%

Paste and position on bottom

Select Element 22 - resize by 22%

Paste and position on bottom

Select Element 50 - resize by 25%

Paste and position on bottom

Select Element 63 - resize by 20%

Paste and position on bottom left

Select Element 57 - resize by 25%

Paste and position on bottom left

Select Element 5 - resize by 25%

Paste and position on bottom left

Select Element 58 - Paste and position on top right

Paste paper 6 on canvas

Apply Mask 13 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, April 29, 2015

PINK STAR




Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Pink Paradox" which you can get by going here

Mask 22 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 123 and paste in the center of the canvas

Resize by 65%

Paste and position in the center of the canvas

Select Element 195- resize by 25%

Paste and position on the top center

Select Element 179 - resize by 35%

Paste and position on top where desired

Select Element 116 - resize by 35%

Paste and position on bottom center

Select Element 109 - resize by 25%

Paste and position on bottom right

Select Element 72 - resize by 15%

Paste and position on bottom right

Select Element 46 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 51 - resize by 15%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 78 - resize by 20%

Paste and position on bottom

Select Element 148 - resize by 15%

Paste and position on bottom

Select Element 5 - resize by 12%

Paste and position on bottom

Select Element 47 - resize by 15%

Paste and postion on bottom

Select Element 49 - resize by 12%

Paste and position on bottom

Select Element 67 - resize by 18%

Paste and position on bottom left

Select Element 15 - resize by 15%

Paste and position on bottom left

Select Element 24 - resize by 12%

Paste and position on bottom left

Select Element 56 - resize by 15%

Paste and position on bottom left

Select Element 33 - resize by 15%

Paste and position on bottom left

Select Element 43 - resize by 20%

Paste and position on bottom left

Select Element 28 - resize by 20%

Paste and position on bottom left

Select Element 57 - resize by 20%

Paste and position on bottom left

Select Element 62 - resize by 15%

Paste and position on bottom left

Select Element 37 - resize by 12%

Paste and position on bottom left

Select Element 1 - resize by 12%

Paste and position on fountain element where desired

Select Element 10 - resize by 12%

Paste and position on top right

Paste paper 34 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


SOLDIER GIRL




Supplies needed:

I am using the stunning artwork from ViNina for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Soldier" which you can get by going here

Mask 311 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 64 and paste in the center of the canvas

Resize by 45%

Paste and position on left side where desired

Select Element 76 - resize by 40%

Paste and position on top right below building element

Select your magic wand tool and click in the center of each square in the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Paste paper 11

Select invert, delete

Paste close-up tubes of choice on top of paper layer where desired and delete

Select none

Change close-ups to Luminance (Legacy)

Apply dropshadow and merge close-ups down on paper

Select Element 57- resize by 20%

Paste and position on bottom right

Select Element 93- resize by 50%

Paste and position on left side above building element

Select Element 125 - resize by 75%

Paste and position on bottom where desired

Select Element 135 - resize by 40%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 89 - resize by 25%

Paste and position on bottom where desired

Select Element 4 - resize by 25%

Paste and position on bottom right

Select Element 124 - resize by 45%

Paste and position on bottom right

Select Element 44 - resize by 12%

Paste and postion on bottom right

Select Element 84 - resize by 25%

Paste and position on bottom right

Select Element 113 - resize by 40%

Paste and position on bottom right

Select Element 123 - resize by 30%

Paste and position on top of barrel element

Select Element 5 - resize by 25%

Paste and position on top of barrel element

Select Element 114 - resize by 20%

Paste and position on barrel element

Select Element 129 - resize by 25%

Paste and position on bottom

Select Element 108 - resize by 20%

Paste and position on bottom

Select Element 101 - resize by 20%

Paste and position on bottom

Select Element 111 - resize by 40%

Paste and position on bottom left

Select Element 68 - resize by 35%

Paste and position on bottom left

Select Element 105 - resize by 20%

Paste and position on bottom left

Select Element 6 - resize by 18%

Paste and position on top where desired

Select Element 92 - resize by 45%

Paste and position on canvas and move to the bottom layer

Add new raster and flood-fill with color or gradient of choice

Apply Mask 311 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, April 28, 2015

WESTERN COWGIRL




Supplies needed:

I am using the stunning artwork from Ted Hammond for this tutorial which you can find here

Scrapkit: I am using a stunning kit from MMeliCrea Designz called "Western Girl" which you can get by going here

Mask 4 from Butterfly Flutterby which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 21 and paste in the center of the canvas

Resize by 65%

Move Element up about 2 inches from the top of canvas

Select Element 8 - resize by 55%

Paste and position on bottom of barn element

Select Element 87- resize by 15%

Image Free Rotate Left by 15% and paste on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 4 - resize by 15%

Paste and position on left side behind tube layer

Select Element 68 - resize by 20%

Paste and position on left side behind tube layer

Select Element 72 - resize by 15%

Paste and position on left side

Select Element 79 - resize by 25%

Paste and postion on left side

Select Element 80 - resize by 20%

Paste and position on bottom left

Select Element 23 - resize by 15%

Paste and position on bottom left

Select Element 76 - resize by 12%

Paste and position on bottom

Select Element 70 - resize by 15%

Paste and position on bottom

Select Element 86 - resize by 12%

Paste and position on bottom

Select Element 67 - resize by 25%

Paste and position on right side

Select Element 29 - resize by 20%

Paste and position on right side below tube layer

Select Element 39 - resize by 10%

Image Free Rotate Left by 15% and paste on right side

Select Element 16 - resize by 25%

Paste and position on bottom right

Select Element 74 - resize by 15%

Paste and position on bottom right

Select Element 45 - resize by 20%

Paste and position on bottom right

Add new raster and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Monday, April 27, 2015

ALICE MADNESS




Supplies needed:

Scrapkit: I am using a stunning kit from Niqui's Designs called "Alice Madness 2" which you can get by going here

Mask 21 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 27, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 19 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste close-up tube of choice on top of paper layer and delete

Select none

Change close-up to Overlay

Apply dropshadow and merge close-up down on paper

Move paper below frame

Select Element 59 - resize by 22%

Image Free Rotate Right by 15% and paste on top left

Select Element 57- resize by 30%

Paste and position on bottom left

Select Element 29- resize by 15%

Paste on top of table element

Select Element 45 - resize by 15%

Paste and position on top of table element

Select Element 18 - resize by 25%

Paste and position on top of table element

Select Element 25 - resize by 30%

Paste and position on right side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 21 - resize by 55%

Paste and position on bottom right

Select Element 30 - resize by 40%

Paste and position on bottom right

Select Element 26 - resize by 15%

Paste and position on bottom right

Select Element 28 - resize by 30%

Paste and postion on bottom left

Select Element 31 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 12 - resize by 15%

Paste and position on bottom left

Select Element 47 - resize by 15%

Paste and position on bottom

Select Element 22 - resize by 15%

Paste and position on bottom left

Add new raster and flood-fill with color or gradient of choice

Apply Mask 21 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, April 26, 2015

ELIZABETH




Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Empire of Elizabeth" which you can get by going here

Mask 5 from Melissaz Creationz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete

Paste close-up tube of choice on top of paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity down to 60%

Apply dropshadow and merge close-up down on paper

Move paper below frame

Select Orchid 3 Element - resize by 35%

Paste and position on top of frame layer

Select Flowerspray Element- resize by 35%

Paste and position on top of frame where desired

Select Ribbon Element- resize by 40%

Paste on bottom above frame where desired

Select Bench Element - resize by 40%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Harp Element - resize by 35%

Paste and position on bottom left

Select Vase 2 Element - resize by 45%

Paste and position on bottom left

Select Jewel 3 Element- resize by 40%

Paste and position on bottom left

Select Watch Element- resize by 40%

Image Free Rotate Right by 15% and paste on bottom where desired

Select Bowl Element - resize by 25%

Paste and postion on bottom

Select Flower 3 Element- resize by 15%

Paste and position on bottom

Select Dove 2 Element - resize by 20%

Paste and position on bottom

Select Ring Element - resize by 35%

Image mirror and paste on bottom left

Select Key Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Flowers 6 Element - resize by 35%

Paste and position on bottom right

Select Lamp Element - resize by 22%

Paste and position on bottom right

Select Sparkle 2 Element - resize by 65%

Paste and position on canvas where desired

Add new raster and flood-fill with color or gradient of choice

Apply Mask 5 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, April 23, 2015

ORIENTAL BEAUTY



Supplies needed:

I am using the stunning artwork from Shining Star Art for this tutorial which you can find here

I am using a gorgeous kit from Scrappin Krazy Designs called "Oriental Beauty" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 23, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 24 and paste on the canvas

Resize by 75%

Select Element 19 - resize by 65%

Paste and position in the center where desired

Select Element 79 - resize by 65%

Paste and position on top left behind element 19

Select Element 60 - resize by 65%

Paste and position on bottom left below element 19

Select Element 9 - resize by 30%

Paste and position on top right

Select Element 78 - resize by 40%

Paste and position on top center where desired

Select Element 100 - resize by 30%

Paste and position on center where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 50 - resize by 45%

Paste and position on bottom right

Select Element 12 - resize by 30%

Paste and position on bottom right

Select Element 23 - resize by 50%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 80 - resize by 40%

Paste and position on bottom right

Select Element 22 - resize by 30%

Paste and position on bottom right

Select Element 57 - resize by 25%

Paste and position on bottom

Select Element 14 - resize by 25%

Paste and position on the bottom

Select Element 82 - resize by 25%

Paste and position on the bottom

Select Element 56 - resize by 30%

Paste and position on bottom left

Select Element 28 - resize by 30%

Paste and position bottom left

Select Element 18 - resize by 20%

Paste and position on bottom left

Select Element 95 - resize by 18%

Paste and position on bottom left

Select Element 96 - resize by 20%

Paste and position on bottom left

Select Element 40 - resize by 20%

Paste and position on bottom left

Select Element 53 - resize by 25%

Paste and position on bottom left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, April 22, 2015

SUGAR SKULL



Supplies needed:

I am using the stunning Exclusive artwork from Lady Mishka for this tutorial which you can find here

I am using a gorgeous kit from Bibi's Collections called "Sugar Skull" which you can get by going here

Mask 22 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 22, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 192 and paste on the canvas

Resize by 80%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 18

Select invert, delete, select none

Move paper below frame

Select Element 177 - resize by 30%

Paste and position on top right

Select Element 147 - resize by 65%

Paste and position on bottom right

Select Element 135 - resize by 15%

Paste and position on bottom left

Select Element 79 - resize by 30%

Paste and position on bottom right

Select Element 132 - resize by 30%

Paste and position on bottom right

Select Element 133 - resize by 45%

Image mirror and paste on bottom right

Select Element 81 - resize by 25%

Paste and position on bottom where desired

Select Element 80 - resize by 25%

Paste and position on bottom left

Select Element 129 - resize by 45%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 161 - resize by 50%

Paste and position on top right

Select Element 157 - resize by 75%

Paste and position on top right

Select Element 107 - resize by 30%

Paste and position on right side

Select Element 198 - resize by 20%

Image Free Rotate Right by 15% and paste on top left

Select Element 167 - resize by 20%

Paste and position on top

Select Element 193 - resize by 12%

Paste and position on top

Select Element 207 - resize by 25%

Paste and position on top left

Select Element 130 - resize by 40%

Paste and position on top left

Select 186 Element - resize by 25%

Paste and position on top left

Select Element 68 - resize by 40%

Paste and position on top center

Select Element 199 - resize by 20%

Paste and position on the top center

Select Element 185 - resize by 30%

Paste and position in the center

Select Element 200 - resize by 25%

Paste and position on left side

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, April 16, 2015

GOTH LOVE



Supplies needed:

I am using the stunning artwork from Arthur Crowe for this tutorial which you can find here

I am using a gorgeous kit from Niqui's Designs called "Gothic Love" which you can get by going here

Mask 4 from ButterflyFlutterby which you can find here

Mask 4 from Melissaz Creations which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 16, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 9 and paste in the center of the canvas

Select Element 26 - resize by 55%

Paste and position above Element 9

Select Element 58 - resize by 25%

Paste and position on top left

Image duplicate and mirror

Select Element 3 - resize by 55%

Paste and position on right side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 8 - resize by 35%

Paste and position on bottom left

Select Element 13 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 70 - resize by 25%

Paste and position on bottom left

Select Element 64 - resize by 25%

Paste and position on bottom left

Select Element 50 - resize by 20%

Paste and position on bottom left

Select Element 56 - resize by 28%

Image mirror and paste on bottom

Select Element 27 - resize by 12%

Paste and position on bottom left

Select Element 51 - resize by 22%

Paste and position on bottom

Select Element 48 - resize by 22%

Paste and position on bottom right

Select Element 47 - resize by 25%

Paste and position on bottom right

Select Element 2 - resize by 30%

Paste and position on bottom right

Select Element 59 - resize by 17%

Paste and position on bottom

Select Element 7 - resize by 95%

Paste and position on canvas and move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add new raster and flood-fill with color of choice

Apply Mask 4 from Melissaz Creations and merge group

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Tuesday, April 14, 2015

EMO CUTE



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

I am using a gorgeous kit from DnScraps called "Emo Cute" which you can get by going here

Mask 4 from Melissaz Creationz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 14, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Grunge Frame Element and paste in the center of the

canvas

Resize by 65%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 13

Select invert, delete

Paste close-up tube of choice on top of paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity down

to 40%

Merge down on paper layer

Move paper below frame

Select Fur Frame Element - resize by 55%

Paste and position above Grunge Frame

Select Wordart Element - resize by 20%

Paste and position on top of frame where desired

Select Music from Heart Element - resize by 25%

Paste and position on top left

Select Music Element - resize by 35%

Paste and position on bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Cute Heart Element - resize by 40%

Image mirror and paste on bottom left

Select Girly Skull Element - resize by 20%

Paste and position on bottom left

Select Cute Cupcake Element - resize by 25%

Paste and position on bottom left

Select Globe Heart 2 Element - resize by 25%

Image Free Rotate Right by 15% and paste on bottom left

Select Phone Element - resize by 16%

Paste and position on bottom left

Select Comb Element - resize by 15%

Paste and position on bottom

Select Lipstick Element - resize by 15%

Paste and position on bottom

Select Emo Boy Element - resize by 35%

Paste and position on bottom right

Select Skull Polish Element - resize by 20%

Paste and position on bottom right

Select Button Element - resize by 25%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


LIONESS



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

I am using a gorgeous kit from FwTags Creations called "Lioness" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 14, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 and paste in the center of the canvas

Resize by 55%

Select your selections tool and select the center of the Frame(Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 1

Select invert, delete, select none

Move paper below frame

Select Element 42 - resize by 45%

Image mirror and paste on left side

Select Element 53 - resize by 45%

Paste and position on right side

Select Element 59 - resize by 30%

Paste and position on bottom right

Select Element 39 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 30%

Paste and position on bottom right

Select Element 48 - resize by 18%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 45 - resize by 25%

Paste and position on bottom left

Select Element 30 - resize by 12%

Paste and position on bottom left

Select Element 52 - resize by 22%

Paste and position on bottom left

Select Element 3 - resize by 20%

Paste and position on left side

Select Element 65 - resize by 12%

Paste and position on bottom right

Select Element 27 - resize by 12%

Paste and position on bottom right

Select Element 62 - resize by 12%

Paste and position on bottom left

Select Element 28 - resize by 12%

Paste and position on bottom

Select Element 17 - resize by 20%

Paste and position on top left

Select Element 31 - resize by 18%

Paste and position on top right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, April 12, 2015

SPRING IS COMING



Supplies needed:

I am using the stunning artwork from Misticheskaya for this tutorial which you can find here

I am using a gorgeous kit from MMeliCrea Designz called "Spring is Coming" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 12, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 and paste in the center of the canvas

Resize by 85%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Select Frame Element 7 - resize by 90%

Paste and position on top of Frame 6

Select Element 20 - resize by 45%

Image Free Rotate Right by 8% and paste on top right

Select Element 104 - resize by 20%

Paste and position on top right

Select Element 76 - resize by 16%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 84 - resize by 35%

Paste and position on bottom right

Select Element 131- resize by 15%

Paste and position on bottom right

Select Element 141 - resize by 15%

Paste and position on bottom right

Select Element 47 - resize by 30%

Paste and position on bottom right

Select Element 140 - resize by 15%

Paste and position on bottom left


Select Element 101 - resize by 25%

Paste and position on bottom left

Select Element 130 - resize by 15%

Image mirror and paste on bottom left

Select Element 53 - resize by 25%

Paste and position on bottom left

Select Element 52 - resize by 15%

Paste and position on bottom left

Select Element 10 - resize by 15%

Paste and position on bottom left

Select Element 48 - resize by 12%

Paste and position on bottom left

Select Element 43 - resize by 22%

Paste and position on bottom below tube layer

Select Element 78 - resize by 22%

Paste and position on bottom left

Select Element 58 - resize by 25%

Paste and position on top left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


DARK & LUXURIOUS



Supplies needed:

I am using the stunning artwork from Zlata_M for this tutorial which you can find here

I am using a gorgeous kit from Kissing Kate called "Dark and Luxurious" which you can get by going here

Mask 16 from Gina Gems which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 12, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 75%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube of choice on right side and delete

Select none

Change close-up tube to screen and add dropshadow

Merge down on paper

Move paper below frame

Select Element 34 - paste and position above paper/close-up layer

Select Element 43 - resize by 30%

Paste and position on top left below frame layer

Select Element 36 - resize by 45%

Paste and position on bottom left

Select Element 44 - resize by 50%

Image Free Rotate Right by 15% and paste on left side below table element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 66 - resize by 50%

Paste and position on bottom above tube layer

Select Element 69 - resize by 45%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 42 - resize by 25%

Paste and position on bottom right

Select Element 32 - resize by 20%

Paste and position on bottom right

Select Element 63 - resize by 25%

Paste and position on bottom right

Select Element 14 - resize by 30%

Paste and position on bottom right

Select Element 28 - resize by 25%

Paste and position on bottom right

Select Element 4 - resize by 15%

Paste and position on bottom

Select Element 29 - resize by 22%

Paste and position on bottom

Select Element 64 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 39 - resize by 25%

Paste and position on bottom left

Select Element 33 - resize by 25%

Paste and position on bottom left

Select Element 37 - resize by 30%

Paste and position on bottom left

Select Element 3 - resize by 20%

Paste and position on bottom left

Select Element 15 - resize by 20%

Paste and position on bottom left

Select Element 45 - resize by 15%

Paste and position on bottom left

Select Element 58 - resize by 30%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 16 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, April 9, 2015

BAD NURSE



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

I am using a gorgeous kit from Bibi's Collections called "Bad Nurse" which you can get by going here

Mask 22 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 9, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 88 and paste in the center of the canvas

Resize by 55%

Select Element 64 - resize by 52%

Paste and position on top of the frame

Select Element 61 - resize by 65%

Paste and position on right side where desired

Select Element 75 - resize by 30%

Paste and position on right side

Select Element 59 - resize by 25%

Paste and position on right side

Select Element 19 - resize by 65%

Paste and position on bottom left

Select Element 109 - resize by 55%

Paste and position on bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 121 - resize by 35%

Paste and position on top right

Select Element 16 - resize by 25%

Paste and position on top right

Select Element 55 - resize by 45%

Paste and position on bottom right

Select Element 86 - resize by 30%

Image mirror and paste on bottom right

Select Element 65 - resize by 50%

Paste and position on bottom right

Select Element 46 - resize by 25%

Paste and position on bottom right

Select Element 4 - resize by 25%

Paste and position on bottom right

Select Element 107 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom

Select Element 28 - resize by 40%

Paste and position on bottom

Select Element 84 - resize by 50%

Paste and position on left side above chair element

Select Element 20 - resize by 30%

Paste and position on chair element

Select Element 119 - resize by 30%

Paste and position on bottom left

Select Element 116 - resize by 35%

Paste and position on bottom left

Select Element 23 - resize by 30%

Paste and position on bottom left

Select Element 130 - resize by 30%

Paste and position on bottom left

Select Element 82 - resize by 40%

Paste and position on bottom

Select Element 120 - resize by 25%

Paste and position oin top left

Paste paper 3 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, April 8, 2015

STICKY SWEET



Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

I am using a gorgeous kit from Pink Paradox Productions called "Sticky Sweet" which you can get by going here

Mask M4 from Kylie which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 8, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 and paste in the center of the canvas

Resize by 55%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 50

Select invert, delete, select none

Move paper below frame

Select Element 117 - resize by 50%

Paste and position on top of the frame

Select Element 19 - resize by 30%

Paste and position on top right where desired

Select Frame Element 11 - resize by 30%

Paste and position on top right above element 19

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 17

Select invert, delete

Paste close-up tube of choice above paper layer and delete

Select none

Change close-up to Luminence (Legacy) and drop opacity down to 65%

Apply dropshadow and merge down on paper layer

Move below frame

Select Element 18 - resize by 35%

Image mirror and paste on left side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 43 - resize by 25%

Paste and position on bottom right

Select Element 122 - resize by 25%

Paste and position on bottom right

Select Element 126 - resize by 15%

Paste and position on bottom right

Select Element 29 - resize by 22%

Paste and position on bottom right

Select Element 74 - resize by 20%

Paste and position on bottom right

Select Element 66 - resize by 15%

Paste and position on bottom right

Select Element 62 - resize by 15%

Paste and position on bottom

Select Element 1 - resize by 20%

Paste and position on bottom

Select Element 39 - resize by 20%

Paste and position on bottom

Select Element 162 - resize by 20%

Paste and position on left side

Select Element 80 - resize by 25%

Paste and position on bottom left

Select Element 63 - resize by 15%

Paste and position on bottom left

Select Element 38 - resize by 20%

Paste and position on bottom left

Select Element 34 - resize by 25%

Paste and position on bottom left

Select Element 31 - resize by 20%

Paste and position on bottom left

Select Element 23 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 25 - resize by 15%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask M4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Monday, April 6, 2015

SPRING WHITE



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

I am using a gorgeous kit from DnScraps called "Spring White" which you can get by going here

Mask 236 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 6, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Flower Frame Element and paste in the center of the canvas

Resize by 65%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 5

Select invert, delete, select none

Move paper below frame

Select Fence 2 Element - resize by 45%

Paste and position on bottom where desired

Select Circle Element - resize by 40%

Paste and position on bottom where desired

Select Waterfall Element - resize by 22%

Paste and position on top left where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Rose Bug Element - resize by 25%

Image mirror and paste on left side

Select Mushroom House Element - resize by 25%

Paste and position on bottom left

Select Gerbera Element - resize by 15%

Paste and position on bottom left

Select Satin Flower Element - resize by 15%

Paste and position on bottom left

Select Key Element - resize by 15%

Paste and position on bottom left

Select Ladibug Element - resize by 15%

Paste and position on bottom left

Select Bee Element - resize by 15%

Paste and position on top right

Select Heart Rose Element - resize by 15%

Paste and position on bottom right

Select Plants Element - resize by 35%

Paste and position on bottom right

Select Hat Element - resize by 22%

Image Free Rotate Right by 15% and paste on bottom right

Select Cherry Element - resize by 10%

Paste and position on bottom right

Select Pearl Element - resize by 12%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 236 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Saturday, April 4, 2015

EASTER TOWN



Supplies needed:

I am using the stunning artwork from Ismael Rac or this tutorial which you can find here

I am using a beautiful kit from Creative Scraps by Crys called "Easter Town" which you can get by going here

Mask 13 from Urban Fairytales which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).
This tutorial was written by me on April 4, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 70%

Move frame over to the right

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on left side of paper and delete, select none

Drop opacity down to 55% and apply dropshadow

Merge close-up down onto paper layer

Move paper below frame

Select Element 9 - resize by65%

Paste and position above oval frame

Select Element 4 - resize by 50%

Paste and position on left side

Select Element 13 - resize by 30%

Paste and position on top left

Select Element 18 - resize by 65%

Paste and position on canvas where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 12 - resize by 45%

Paste and position on bottom left side

Select Element 23 - resize by 35%

Paste and position on bottom left

Select Element 66 - resize by 40%

Paste and position on bottom right

Select Element 19 - resize by 20%

Paste and position on bottom right

Select Element 3 - resize by 20%

Paste and position on bottom right

Select Element 14 - resize by 30%

Image mirror and paste on bottom left

Select Element 5 - resize by 25%

Image mirror and paste on bottom left

Select Element 15 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 30%

Paste and position on bottom left

Select Element 8 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 7 - resize by 12%

Image Free Rotate Right by 15% and paste on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 13 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, April 2, 2015

EBONY



Supplies needed:

I am using the stunning artwork from Souldesigner for this tutorial which you can find here

I am using a gorgeous kit from Niqui's Designs called "Ebony" which you can get by going here

Mask 236 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 2, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 52 - paste and position in the center of the canvas

Select Frame Element 3 and paste in the center of the canvas

Resize by 65%

Select your selections tool and select the center of the Frame

(Add (Shift), RGB Value, Tolerance 25, Contiguous checked,

Feather 0)

Select modify, expand by 5

Paste paper 7

Select invert, delete

Paste close-up tube on left side of paper and delete, select none

Change close-up to Luminance (Legacy) and apply dropshadow

Drop opacity down to 65%

Merge close-up down onto paper layer

Move paper below frame

Select Frame Element 26 - resize by 45%

Paste and position right side above circle frame

Select your selections tool and select the center of each of the

squares (Add (Shift), RGB Value, Tolerance 25, Contiguous

checked, Feather 0)

Select modify, expand by 5

Paste paper 8

Select invert, delete

Paste close-up tubes of choice in each of the squares above

paper and delete, select none

Change tubes to view of preference (I used burn, hard light and

luminance (legacy).

Select Element 2 - resize by 30%

Image Free Rotate Left by 15% and paste on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 22 - resize by 45%

Paste and position on bottom left side

Select Element 23 - resize by 35%

Paste and position on bottom left

Select Element 66 - resize by 40%

Paste and position on bottom left

Select Element 32 - resize by 15%

Paste and position on bottom left

Select Element 47 - resize by 25%

Paste and position on bottom left

Select Element 48 - resize by 25%

Paste and position on right side

Select Element 20 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 60 - resize by 25%

Paste and position on bottom right

Select Element 31 - resize by 30%

Paste and position on bottom right

Select Element 59 - resize by 40%

Paste and position on bottom right

Select Element 4 - resize by 65%

Paste and position on top left and move to bottom layer

Image duplicate, mirror and flip (reposition as needed)

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 236 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, April 1, 2015

BLACK MAGIC WOMAN



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

I am using a stunning kit from CSDesigns called "Black Magic" which you can get by going here

Mask 265 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 1, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 and paste in the center of the canvas

Resize by 60%

Select your selections tool and select the center of each rectangle in the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 7

Select invert, delete, select none

Move paper below frame

Select Element 3 - resize by 70%

Paste and position on top of frame layer - erase any excess on the sides

Select Element 57 - resize by 25%

Paste and position on top left above frame

Select Element 4 - resize by 20%

Paste and position on right side

Select Element 28 - resize by 50%

Paste and position above building element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 22%

Paste and position on bottom left

Select Element 10 - resize by 20%

Paste and position on bottom left

Select Element 9 - resize by 25%

Paste and position on bottom left

Select Element 7 - resize by 22%

Paste and position on bottom left

Select Element 36 - resize by 15%

Paste and position on bottom left

Select Element 49 - resize by 15%

Paste and position on right side

Select Element 5 - resize by 15%

Paste and position bottom right

Select Element 58 - resize by 25%

Paste and position on bottom right

Select Element 39 - resize by 22%

Paste and position on bottom right

Select Element 41 - resize by 20%

Paste and position on bottom right

Paste paper 8 on canvas

Apply Mask 265 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


CORRUPTED NUN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

I am using a wicked kit from Bibi's Collections called "Nun" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 1, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 69 and paste in the center of the canvas

Resize by 60%

Select Element 87 - resize by 50%

Paste and position on right side

Select Element 73 - resize by 20%

Paste and position on bottom right

Select Element 10 - resize by 20%

Paste and position top right above mirror element

Select Element 30 - resize by 15%

Paste and position on right side above mirror element

Select Element 43 - resize by 45%

Paste and position on left side

Select Element 62 - resize by 35%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 111 - resize by 20%

Paste and position on bottom left

Select Element 75 - resize by 30%

Paste and position on bottom left

Select Element 56 - resize by 15%

Paste and position on bottom left

Select Element 15 - resize by 20%

Paste and position on bottom left

Select Element 76 - resize by 30%

Paste and position on top left above chair element

Select Element 90 - resize by 12%

Paste and position on top left above chair element

Select Element 83 - resize by 30%

Paste and position on right side

Select Element 14 - resize by 14%

Paste and position on bottom right

Select Element 52 - resize by 30%

Paste and position on bottom right

Select Element 12 - resize by 25%

Paste and position on bottom

Select Element 107 - resize by 25%

Paste and position on bottom

Select Element 24 - resize by 20%

Paste and position on bottom

Select Element 39 - resize by 35%

Paste and position on top right

Select Element 77 - resize by 30%

Paste and position on top left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif