I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Tuesday, February 24, 2015

HONEY BEAR




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

I am using a beautiful kit from Kissing Kate called "Honey Bear-licious" which you can get by going here

Mask 35 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 24, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Resize by 75%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Select Element 61 - resize by 30%

Paste and position on top of the paper layer

Select Element 36 - resize by 50%

Paste and position on top of frame

Select Element 47 - resize by 50%

Paste and position on top of frame

Image duplicate and flip to bottom of frame

Select Element 12 - resize by 55%

Paste and position on right side

Select Element 45 - resize by 65%

Paste and position on bottom

Select Element 38 - resize by 55%

Paste and position on bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 25 - resize by 30%

Paste and position on bottom right

Select Element 53 - resize by 15%

Paste and position on bottom right

Select Element 20 - resize by 40%

Paste and position on bottom right

Select Element 7 - resize by 25%

Paste and position on bottom right

Select Element 66 - resize by 18%

Paste and position bottom right

Select Element 3 - resize by 20%

Paste and position on bottom left

Select Element 19 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 1 - resize by 18%

Paste and position on bottom left

Select Element 23 - resize by 25%

Paste and position on bottom left

Select Element 37 - resize by 25%

Paste and position on top right

Paste paper 10 on canvas

Apply Mask 35 or mask of choice

Merge group and move to the bottom layer

Resize by 90%

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


ENCHANTING MEADOW



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

I am using a beautiful kit from Scrappin Krazy Designs called "Enchanted Garden" which you can get by going here

Mask 22 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 24, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 17 and paste in the center of the canvas

Resize by 90%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 16

Select invert, delete, select none

Move paper below frame

Select Element 21 - resize by 75%

Paste and position on top of the frame

Select Element 12 - resize by 55%

Paste and position on top of frame

Select Element 30 - resize by 30%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 62 - resize by 45%

Paste and position on bottom right

Select Element 29 - resize by 15%

Paste and position on right side on top of heart basket

Select Element 5 - resize by 25%

Paste and position on bottom right

Select Element 69 - resize by 25%

Paste and position on bottom right

Select Element 14 - resize by 30%

Paste and position on bottom right

Select Element 54 - resize by 30%

Paste and position bottom right

Select Element 26 - resize by 40%

Paste and position on bottom left below tube layer

Select Element 67 - resize by 45%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Resize by 90%

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Monday, February 23, 2015

ANGRY LEPRECHAUN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

I am using a wicked kit from Bibi's Collections called "Angry Leprechaun" which you can get by going here

Mask 288 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 23, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 91 and paste in the center of the canvas

Resize by 90%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 13

Select invert, delete, select none

Move paper below frame

Select Element 45 - resize by 25%

Paste and position on top left below frame

Select Element 114 - resize by 45%

Paste and position on right side above frame

Select Element 147 - resize by 55%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 132 - resize by 30%

Paste and position on bottom left

Select Element 96 - resize by 45%

Paste and position on bottom left below tube layer

Select Element 135 - resize by 25%

Paste and position on bottom left below tube

Select Element 173 - resize by 65%

Paste and position on bottom right

Select Element 140 - resize by 40%

Paste and position on bottom right

Select Element 32 - resize by 25%

Paste and position on bottom right

Select Element 9 - resize by 15%

Paste and position bottom right

Select Element 17 - resize by 10%

Paste and position on bottom right

Select Element 130 - resize by 30%

Paste and position on bottom

Select Element 36 - resize by 25%

Image Free Rotate Right by 15% and paste on top right


Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 288 or mask of choice

Merge group and move to the bottom layer

Resize by 90%

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Saturday, February 21, 2015

GRIEVANCE



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

I am using a wicked kit from FwTags Creations called "Grievance" which you can get by going here

Mask 32 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 21, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 and paste in the center of the canvas

Resize by 60%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 21 - resize by 45%

Paste and position on bottom

Select Element 26 - resize by 45%

Paste and position on left side

Select Element 34 - resize by 22%

Paste and position on bottom left

Select Element 44 - resize by 10%

Paste and position on bottom left

Select Element 43 - resize by 12%

Paste and position on bottom left

Select Element 14 - resize by 15%

Paste and position on right side

Select Element 38 - resize by 15%

Image mirror and paste on bottom right

Select Element 55 - resize by 20%

Paste and position bottom right

Select Element 69 - resize by 15%

Paste and position on bottom

Select Element 7 - resize by 15%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 32 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, February 19, 2015

GIRLY GIRL



Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

I am using a beautiful collab kit from Bibi's Collections called "Amore Amor" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 19, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 51 - resize by 45%

Paste and position on the center of the canvas

Select Element 57 - resize by 50%

Paste and position on canvas

Select Element 10 - resize by 45%

Paste and position on canvas

Select all, float, defloat

Paste close-up of choice on top of element

Select invert, delete, select none

Apply Xero - Bad Dream on default setting of choice

Drop opacity down to 60%

Select Frame Element 7 and paste in the center of the canvas

Resize by 65%

Select your selections tool and select the outside portion on the heart (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 3

Select invert, delete, select none

Move paper below frame

Select Element 28 - resize by 50%

Image Free Rotate Left by 15% and paste on top left

Select Element 46 - resize by 25%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 24 - resize by 15%

Paste and position on bottom right

Select Element 45 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 58 - resize by 12%

Paste and position on bottom right

Select Element 70 - resize by 25%

Paste and position on bottom right

Select Element 2 - resize by 20%

Paste and position on bottom left

Select Element 55 - resize by 14%

Paste and position bottom left

Select Element 34 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 62 - resize by 25%

Paste and position on bottom left

Select Element 9 - resize by 20%

Paste and position on bottom left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, February 18, 2015

DAMON



Supplies needed:

I am using the stunning artwork from The Hunter for this tutorial which you can find here

I am using a beautiful kit from Bibi's Collections called "Vampire Diaries" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 18, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 99 - resize by 55%

Paste and position in the center of the canvas

Select Element 143 - resize by 45%

Paste and position on top of canvas

Select Element 67 - resize by 25%

Paste and position on top left

Select Element 37 - resize by 65%

Paste and position in the center of canvas where desired

Select Element 38 - resize by 70%

Paste and position in the center of the canvas

Select Element 59 - resize by 40%

Image mirror and paste on top left

Select Element 29 - resize by 30%

Adjust, Hue & Saturation and Colorize if desired with the following settings:

Paste and position on top center where desired

Select Element 117 - resize by 35%

Paste and position on bottom left

Select Element 112 - resize by 35%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 46 - resize by 45%

Paste and position on top right

Select Element 10 - resize by 12%

Paste and position on bottom right

Select Element 121 - resize by 15%

Paste and position on bottom right

Select Element 148 - resize by 25%

Paste and position on bottom right

Select Element 150 - resize by 12%

Paste and position on bottom right

Select Element 31 - resize by 15%

Paste and position on bottom right

Select Element 168 - resize by 15%

Paste and position on bottom right

Select Element 141 - resize by 20%

Paste and position on left side

Select Element 136 - resize by 20%

Paste and position on top of coffin element

Select Element 167 - resize by 25%

Image mirror and paste on bottom left

Select Element 170 - resize by 25%

Paste and position on bottom left

Select Element 9 - resize by 30%

Paste and position on bottom left

Select Element 12 - resize by 10%

Paste and position on bottom left

Select Element 7 - resize by 25%

Paste and position on bottom left

Select Element 130 - resize by 15%

Paste and position on bottom left
Paste paper 10 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Monday, February 16, 2015

MYSTERE



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

I am using a beautiful kit from Kissing Kate called "Mystere" which you can get by going here

Mask 20 from Moonbeam and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 16, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 and paste in the center of the canvas

Resize by 80%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 4

Select invert, delete, select none

Move paper below frame

Select Element 7 - resize by 30%

Paste and position on top of paper layer

Select Element 4 - resize by 20%

Paste and position in the center of the canvas

Apply Mura Meister - Copies on the following encircle settings:

Select Element 43 - resize by 45%

Paste and position on right side

Select Element 27 - resize by 20%

Paste and position on right side of frame

Duplicate flower element 2x and reposition copies where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 67 - resize by 55%

Paste and position on top of frame

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 59 - resize by 45%

Paste and position on left side, duplicate and mirror

Select Element 62 - resize by 20%

Image mirror and paste on bottom right

Select Element 65 - resize by 35%

Paste and position on bottom right

Select Element 58 - resize by 15%

Paste and position on bottom right

Select Element 33 - resize by 20%

Paste and position on bottom right

Select Element 13 - resize by 12%

Paste and position on bottom right

Select Element 68 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 51 - resize by 15%

Image mirror and paste on bottom left

Select Element 64 - resize by 22%

Paste and position on bottom left

Select Element 46 - resize by 25%

Paste and position on bottom left

Select Element 26 - resize by 10%

Paste and position on bottom left

Paste paper 10 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


DARK DESIRES



Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

I am using a wicked kit from Pink Paradox Productions called "Dark Desires" which you can get by going here

Mask M4 from Kylie which you can find on the Misfits Bloghere

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 16, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 and paste in the center of the canvas

Resize by 55%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 38

Select invert, delete, select none

Move paper below frame

Select Element 127 - resize by 20%

Paste and position on top right above frame

Select Element 5 - resize by 22%

Paste and position on left side above frame

Select Element 102 - resize by 35%

Paste and position on right side of frame

Select Element 99 - resize by 35%

Paste and position on bottom right

Select Element 67 - resize by 15%

Paste and position on chair element

Select Element 1 - resize by 15%

Paste and position on right side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 63 - resize by 20%

Paste and position on bottom right

Select Element 54 - resize by 15%

Paste and position on bottom right

Select Element 4 - resize by 12%

Paste and position on bottom right

Select Element 55 - resize by 15%

Paste and position on bottom right

Select Element 124 - resize by 30%

Paste and position on bottom left

Image duplicate, mirror and reposition on bottom right where desired

Select Element 2 - resize by 25%

Paste and position on bottom left

Select Element 66 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 49 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 20 - resize by 15%

Paste and position on bottom left

Select Element 91 - resize by 20%

Paste and position on bottom

Select Element 59 - resize by 15%

Paste and position on bottom

Select Element 21 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom

Select Element 151 - resize by 20%

Paste and position on bottom where desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask M4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Sunday, February 15, 2015

ZOMBIE LOVE



Supplies needed:

I am using the stunning artwork from Freya Langford-Sidebottom for this tutorial which you can find here

I am using a wicked Collab kit from MMeliCrea Designz called "Zombie Valentine" which you can get by going here

Mask 112 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 15, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 and paste in the center of the canvas

Resize by 80%

Select your selections tool and select the center of each square in the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 5

Select invert, delete

Paste close-up tube on top right on paper and delete, select none

Change close-up to Luminance (Legacy) and apply dropshadow

Merge close-up down onto paper layer

Move paper below frame

Select Element 111 - resize by 25%

Paste and position on top left above frame

Select Element 26 - resize by 18%

Paste and position on right side above frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 29 - resize by 16%

Image Free Rotate Left by 15% and paste and on left side

Select Element 109 - resize by 30%

Paste and position on bottom left

Select Element 127 - resize by 15%

Paste and position on bottom left

Select Element 119 - resize by 20%

Paste and position on bottom left

Select Element 62 - resize by 20%

Paste and position on bottom left

Select Element 131 - resize by 15%

Paste and position on bottom left

Select Element 17 - resize by 25%

Image mirror and paste on bottom right

Select Element 66 - resize by 20%

Paste and position bottom right

Select Element 94 - resize by 25%

Paste and position on bottom right

Select Element 45 - resize by 15%

Paste and position on bottom right

Select Element 78 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 34 - resize by 15%

Paste and position on bottom

Select Element 121 - resize by 15%

Paste and position on bottom

Select Element 2 - resize by 15%

Paste and position on right side

Select Element 4 - resize by 20%

Paste and position on left side

Paste paper 3 on canvas

Apply Mask 112 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


SAD LOVE



Supplies needed:

I am using the beautiful artwork from Danny Lee for this tutorial which you can find here

I am using a gorgeous kit from Design by Joan called "Sad Love" which you can get by going here

Mask 43 from Chas which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 15, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 30 and paste in the center of the canvas

Resize by 85%

Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Select modify, expand by 5

Paste paper 3

Select invert, delete, select none

Move paper below frame

Select Element 35 - resize by 60%

Paste and position on right side of frame

Select Element 90 - resize by 20%

Paste and position on top right above frame

Select Element 92 - resize by 30%

Paste and position on left side

Select Element 103 - resize by 25%

Paste and position on right side above heart element

Select Element 1 - resize by 40%

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 30%

Paste and position on bottom right

Select Element 69 - resize by 25%

Paste and position on bottom right

Select Element 21 - resize by 25%

Paste and position on bottom right

Select Element 44 - resize by 25%

Paste and position on bottom right

Select Element 83 - resize by 15%

Paste and position on bottom

Select Element 111 - resize by 25%

Paste and position on bottom left

Select Element 76 - resize by 25%

Paste and position on bottom left

Select Element 82 - resize by 25%

Paste and position on bottom left

Select Element 77 - resize by 30%

Paste and position bottom left

Select Element 88 - resize by 15%

Image mirror and paste on bottom left

Select Element 28 - resize by 20%

Paste and position on bottom left

Add new raster layer and flood-fill with color of choice

Apply Mask 43 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Saturday, February 14, 2015

LOVE STINKS




Supplies needed:

I am using the beautiful artwork from Wendy Gerber for this tutorial which you can find here

I am using a wicked kit from Freeks Creations called "Fuck Vday 2" which you can get by going here

Valentines Template from Amy & Leah which you can find here

Plugins: Lokas 3D Shadow, Penta - Jeans, Penta - Dot and Cross, Eyecandy 4000 - Glass, Eyecandy 4000 - HSB Noise
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 14, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas to 750 x 600

Select Broken Heart Shape layer

Apply Eyecandy Glass on clear default settings

Select Rect 1 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rect layer

Select Oval layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (style, Angle 45, Repeat 0)

Add Close-up tube of choice and paste on top of gradient layer

Select invert, delete, select none

Apply Xero Bad Dream on default setting of choice

Change close-up to Luminace (Legacy)

Merge close-up down onto gradient layer

Delete/Hide original oval layer

Select Broken Glass Element - resize by 65%

Paste and position on top of oval/close-up

Select Square 1 layer

Apply Penta Jeans with the following settings:

Select Rect 2 layer

Apply Penta Dot and Cross with the following settings:

Select Square 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy HSB Noise on the following settings

Select Circle layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original circle layer

Select Rect 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/hide original rect layer

Select Rect 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta Jeans with the same previous settings

Delete/Hide original rect layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Skull & Rose Element - resize by 35%

Paste and position on top left

Select Voodoo Heart Element - resize by 25%

Paste and position on right side

Select Claws Element - resize by 20%

Paste and position on top of broken heart

Select Voodoo Doll Element - resize by 25%

Paste and position on bottom left

Select Brass Knuckles Element - resize by 25%

Paste and position on bottom left

Select Shoe Element - resize by 25%

Paste and position on bottom left

Select Splash 2 Element - paste and position on left side

Move to bottom layer - duplicate and mirror

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Friday, February 13, 2015

JULIE LOVE





Supplies needed:

I am using the beautiful artwork from ViNina for this tutorial which you can find here

I am using a gorgeous kit from Bibi's Collections called "Julie Love" which you can get by going here

Mask M4 from Kylie which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 13, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 20 and paste in the center of the canvas

Resize by 55%

Select your selections tool and select the center of the Frame

(Add (Shift), RGB Value, Tolerance 25, Contiguous checked,

Feather 0)

Select modify, expand by 5

Paste paper 1

Select invert, delete, select none

Move paper below frame

Select Element 94 - resize by 45%

Paste and position on top of paper where desired

Select Element 89 - resize by 25%

Paste and position on top right above frame

Select Element 108 - resize by 25%

Paste and position on top right

Select Element 28 - resize by 25%

Paste and position on right side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 40%

Paste and position on bottom center

Select Element 93 - resize by 50%

Paste and position on top left

Select Element 62 - resize by 40%

Paste and position on left side

Select Element 22 - resize by 30%

Paste and position on bottom right

Select Element 23 - resize by 30%

Paste and position on bottom right

Select Element 1 - resize by 40%

Paste and position on bottom right

Select Element 72 - resize by 25%

Paste and position on bottom left

Select Element 84 - resize by 22%

Paste and position bottom left

Select Element 4 - resize by 35%

Image mirror and paste on bottom left

Select Element 8 - resize by 30%

Paste and position on bottom left

Select Element 78 - resize by 15%

Paste and position on bottom left

Select Element 9 - resize by 22%

Paste and position on bottom left

Select Element 18 - resize by 25%

Paste and position on bottom left

Select Element 75 - resize by 25%

Paste and position on bottom

Select Element 77 - resize by 20%

Paste and position on bottom

Select Element 56 - resize by 20%

Paste and position on bottom

Paste paper 6 on canvas

Apply Mask M4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Thursday, February 5, 2015

MIDNIGHT KISS




Supplies needed:

I am using the beautiful artwork from The Hunter for this tutorial which you can find here

I am using a stunning kit from FwTags Creation called "Encadenada" which you can get by going here

Mask 160 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow, Eyecandy Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 5, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 32 and paste in the center of the canvas

Resize by 65%

Select Element 35 - resize by 55%

Paste and position on right side below element 32

Select Element 20 - resize by 35%

Paste and position on top left

Apply Eyecandy Gradient Glow if desired (Glow Width 3)

Select Element 50 - resize by 20%

Paste and position on top where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 35%

Paste and position on bottom left

Select Element 46 - resize by 25%

Paste and position on bottom left side

Select Element 25 - resize by 10%

Paste and position on bottom left

Select Element 88 - resize by 15%

Paste and position on bottom left

Select Element 4 - resize by 15%

Paste and position on bottom left

Select Element 80 - resize by 15%

Paste and position on bottom

Select Element 90 - resize by 15%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 34 - resize by 12%

Paste and position bottom right

Select Element 48 - resize by 25%

Paste and position on bottom right

Select Element 76 - resize by 15%

Paste and position on bottom right

Select Element 22 - resize by 15%

Paste and position on bottom right

Select Element 23 - resize by 15%

Paste and position on top right and move to the bottom layer

Paste paper 2 on canvas

Apply Mask 160 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Wednesday, February 4, 2015

LUCKY CUPID




Supplies needed:

I am using the beautiful artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Lucky Cupid" which you can get by going here

Heart Mask 1 from Kissing Kate which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 4, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 and paste in the center of the canvas

Resize by 60%

Select your selections tool and select the center of the Frame

(Add (Shift), RGB Value, Tolerance 25, Contiguous checked,

Feather 0)

Select modify, expand by 3

Paste paper 17

Select invert, delete, select none

Move paper below frame

Select Element 130 - resize by 35%

Paste and position on top of paper where desired

Select Element 125 - resize by 50%

Paste and position on left side above frame layer - erase any

excess bits on the bottom as desired

Select Element 61 - resize by 20%

Paste and position on top right

Select Element 6 - resize by 16%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 20%

Paste and position on left side

Select Element 69 - resize by 15%

Paste and position on bottom left

Select Element 34 - resize by 15%

Paste and position on bottom left

Select Element 42 - resize by 20%

Paste and position on bottom left

Select Element 3 - resize by 15%

Paste and position on bottom left

Select Element 43 - resize by 15%

Paste and position on bottom left

Select Element 126 - resize by 15%

Paste and position bottom left

Select Element 57 - resize by 20%

Paste and position on right side

Select Element 118 - resize by 25%

Paste and position on bottom right

Select Element 36 - resize by 20%

Paste and position on bottom right

Select Element 13 - resize by 20%

Paste and position on bottom right

Select Element 128 - resize by 15%

Paste and position on bottom right

Select Element 16 - resize by 15%

Paste and position on bottom right

Select Element 18 - resize by 15%

Paste and position on bottom right

Select Element 58 - resize by 15%

Paste and position on bottom right

Paste paper 8 on canvas

Apply Mask M1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif