I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Tuesday, June 30, 2015

XMAS IN JULY



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Xmas in July" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 70 - resize by 55%

Paste and position in the center of the canvas

Select Element 76 - resize by 50%

Paste and position in the center of the canvas

Change to Overlay

Select Element 41 - paste and position in the center of the canvas where desired

Select Element 47 - resize by 45%

Paste and position on the top of the hut element where desired

Select Element 12 - resize by 50%

Paste and position on the top right below hut element

Select Element 27 - resize by 55%

Paste and position on the bottom below palm tree element

Select Element 44 - resize by 80%

Paste and position on the right side where desired

Select Element 31 - resize by 55%

Select Element 35 - resize by 30%

Paste and position on top of hut element where desired

Image duplicate and mirror

Paste and position on the top left

Select Element 58 - resize by 30%

Paste and position on bottom left

Select Element 71 - resize by 50%

Paste and position on the bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 4 - resize by 25%

Paste and position on bottom right side

Select Element 52 - resize by 20%

Paste and position on the right side above boat element

Select Element 54 - resize by 30%

Paste and position on the right side above boat element

Select Element 62 - resize by 30%

Paste and position on the bottom right

Select Element 74 - resize by 20%

Paste and position on the bottom right

Select Element 72 - resize by 25%

Paste and position on the bottom left

Select Element 80 - resize by 15%

Paste and position on the bottom left

Select Element 48 - resize by 25%

Paste and position on the bottom left

Select Element 49 - resize by 35%

Paste and position on the bottom

Select Element 55 - resize by 25%

Paste and position on the bottom

Select Element 9 - resize by 18%

Paste and position on the bottom

Select Element 17 - resize by 55%

Paste and position on the bottom

Select Element 51 - resize by 15%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, June 28, 2015

NERVOUS BREAKDOWN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Nervous Breakdown" which you can get by going here

Mask 7 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 65 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Hard Light

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Element 78 - resize by 55%

Paste and position above paper/close-tube where desired

Select Element 56 - resize by 70%

Paste and position on top right

Select Element 29 - resize by 25%

Image Free Rotate Left and paste on left side

Select Element 60 - resize by 55%

Paste and position on the bottom

Select Element 77 - resize by 45%

Paste and position on the bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 30%

Paste and position on bottom right side

Select Element 8 - resize by 25%

Paste and position on the bottom right

Select Element 33 - resize by 30%

Paste and position on the bottom right

Select Element 19 - resize by 20%

Paste and position on the bottom right

Select Element 13 - resize by 20%

Paste and position on the bottom right

Select Element 37 - resize by 25%

Paste and position on the bottom left

Select Element 5 - resize by 25%

Paste and position on the bottom left

Select Element 53 - resize by 30%

Paste and position on the bottom left

Select Element 49 - resize by 20%

Paste and position on the bottom left

Select Element 26 - resize by 202%

Paste and position on the bottom left

Select Element 4- resize by 30%

Paste and position on the top right

Paste paper 11 on canvas

Apply Mask 7 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

MADDIE HATTER


Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Maddie Hatter" which you can get by going here

Mask 315 from Aqua which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 18

Select invert, delete select none

Move paper layer below window frame layer

Select Frame Element 10 - paste on top of frame 5 and reposition where desired

Select Greenery Element - resize by 20%

Paste and position on top left below frame 10

Select WA2 Element - resize by 45%

Paste and position on top right

Apply Eyecandy 4000 - Gradient Glow on fat default settings (Glow Width 3)

Select Bridge Element - resize by 45%

Paste and position on bottom right

Select Butterly Element- resize by 55%

Paste and position on right side where desired

Select Deco6 Element - resize by 45%

Paste and position on left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Mushroom 2 Element - resize by 25%

Paste and position on the bottom right side

Select Hat 3 Element - resize by 30%

Paste and position on the bottom right

Select Teapot Element - resize by 30%

Paste and position on the bottom right

Select Deco 3 Element - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom

Select Flower 4 Element - resize by 25%

Paste and position on bottom left

Select Bottle Element - resize by 40%

Paste and position on the bottom left

Select Stamp Element - resize by 25%

Paste and position on the bottom left

Select Books 2 Element - resize by 40%

Paste and position on the bottom left

Select Cat Element - resize by 40%

Paste and position on the bottom left

Select Flower 5 Element - resize by 30%

Paste and position on the bottom left

Select Mushroom 4 Element - resize by 35%

Paste and position on the bottom left

Select Brad 3 Element - resize by 75%

Paste and position on the bottom

Select Caterpillar Element - resize by 55%

Paste and position on the bottom

Paste paper 11 on canvas

Apply Mask 315 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, June 24, 2015

GOTHIC DINA


Supplies needed:

I am using the stunning artwork from Ishika Chowdhury for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Whisper In The Wind called "Gothic Dina" which you can get by going here

Mask 11 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 94 - resize by 65%

Paste and position in the center of the canvas

Select Frame 1 Element - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center portion of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete select none

Move paper layer below window frame layer

Select Element 88 - resize by 45%

Paste and position bottom left below the frame layer

Image duplicate, mirror and flip

Colorize element with the following settings:

Select Element 31 - resize by 20%

Paste and position on top left

Select Element 65 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 25%

Paste and position on the right side

Select Element 54 - resize by 15%

Paste and position on the right side

Select Element 95 - resize by 22%

Paste and position on the right side

Select Element 87 - resize by 13%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 62 - resize by 20%

Paste and position on the bottom right

Select Element 63 - resize by 15%

Paste and position on bottom right

Select Element 4 - resize by 22%

Paste and position on the bottom

Select Element 27 - resize by 20%

Paste and position on the bottom left

Select Element 17 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 30 - resize by 22%

Paste and position on the bottom left

Select Element 1 - resize by 12%

Paste and position on the bottom left

Select Element 10 - resize by 15%

Paste and position on the bottom

Select Element 50 - resize by 15%

Paste and position on the bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, June 22, 2015

BLACK BUTTERFLY




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections Productions called "Black Butterfly" which you can get by going here

Mask 11 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 12 - resize by 65%

Paste and position in the center of the canvas and move down about an inch

Select Element 63 - resize by 50%

Paste and position on top left

Select Element 84 - resize by 50%

Paste and position on top right

Select your magic wand tool and select center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete select none

Move paper layer below window frame layer

Select Element 20 - resize by 50%

Paste and position on top left

Select Element 30 - resize by 65%

Paste and position on left side

Select Element 25 - resize by 35%

Paste and position on bottom right

Select Element 77 - resize by 55%

Paste and position on bottom left

Select Element 5 - resize by 50%

Paste and position on the bottom left below the tree element

Select Element 73 - resize by 45%

Paste and position on the bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 45%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 46 - resize by 30%

Image mirror and paste on the bottom right

Select Element 75 - resize by 30%

Paste and position on bottom right

Select Element 71 - resize by 30%

Paste and position on bottom left

Select Element 68 - resize by 15%

Paste and position on the bottom

Select Element 24 - resize by 35%

Paste and position on the bottom

Select Element 79 - resize by 20%

Paste and position on the left side

Select Element 64 - resize by 20%

Image Free Rotate Right by 15% and paste on the top left

Paste paper 2 on canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, June 21, 2015

TURTLE BABE


Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Schnegge called "Turtle" which you can get by going here

Mask 8 from Gina Gems which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 43 - resize by 65%

Paste and position in the center of thee canvas

Select your magic wand tool and select center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete select none

Move paper layer below window frame layer

Select Element 54 - resize by 40%

Paste and position on on the left side below the frame

Select Element 52 - resize by 65%

Paste and position on the bottom of the frame

Select Element 2 - resize by 45%

Paste and position on the bottom right below the frame

Select Element 13 - resize by 45%

Paste and position on the top left above frame

Select Element 28 - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 56 - resize by 35%

Paste and position on left side

Select Element 38 - resize by 25%

Paste and position on left side

Select Element 55 - resize by 55%

Image Free Rotate Right by 15% and paste on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 58- resize by 30%

Paste and position on bottom right

Select Element 35 - resize by 30%

Paste and position on bottom right

Select Element 16 - resize by 25%

Paste and position on bottom right

Select Element 45 - resize by 30%

Paste and position on bottom left above boat element

Select Element 33 - resize by 30%

Paste and position on bottom left

Select Element 47 - resize by 22%

Image mirror and paste on the bottom left

Select Element 60 - resize by 30%

Paste and position on the bottom

Select Element 17 - resize by 30%

Paste and position on the bottom

Select Element 32 - resize by 25%

Paste and position on the bottom

Select Element 42 - resize by 30%

Paste and position in the center above the fence element

Paste paper 1 on canvas

Apply Mask 8 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, June 20, 2015

ROCK STAR LIFE



Supplies needed:

I am using the stunning artwork from Justice Howard for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Freeks Creations called "Rock Star" which you can get by going here

Mask 36 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 20, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete select none

Move paper layer below window frame layer

Select your magic wand tool and select the green color portions of the frame

If desired colorize with the following settings:

Select Broken Glass Element - resize by 75%

Paste and position on top of paper layer

Select Drums Element - paste and position on the bottom of the frame

Select Metal Horns Element - resize by 25%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Splash Element - resize by 22%

Paste and position on the bottom left

Select Guitar Element - resize by 40%

Paste and position on bottom left

Select Shoes Element - resize by 22%

Paste and position on bottom left

Select Speakers 2 Element - resize by 22%

Paste and position on bottom left

Select Cross Element - resize by 30%

Paste and position on the bottom right

Select Record Element - resize by 22%

Paste and position on the bottom right

Select Headphones Element - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right

Select Microphone Element - resize by 20%

Paste and position on the bottom right

Select Flowers 4 Element - resize by 20%

Paste and position on the bottom below tube

Select Body Jewelry 2 Element - resize by 12%

Image Free Rotate Right by 15% and paste on the bottom below tube

Paste paper 6 on canvas

Apply Mask 36 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

GO GO GIRL



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "GoGo" which you can get by going here

Mask 78 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 19, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Cityscape Element - resize by 55%

Paste and position in the center of the canvas and move up towards the top

Select Sparkles 2 Element - resize by 45%

Paste and position on top of cityscape element

Select Bar Element - resize by 75%

Paste and position on the bottom above the cityscape element

Select Music Element - resize by 95%

Paste and position on the canvas and move behind the cityscape where desired

Select WA 2 Element - resize by 65%

Paste and position on top of the cityscape element

Select WA Element - resize by 65%

Paste and position on top of the WA 2 element and stagger it

Select Speaker 2 Element - resize by 55%

Paste and position on the bottom right

Select Heart 2 Element - resize by 55%

Image Free Rotate Right by 15% and paste on the bottom right

Select Flower 3 Element - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Boots Element - resize by 55%

Paste and position on the bottom left

Select Lipstick Element - resize by 50%

Paste and position on bottom left

Select Bracelet Element - resize by 30%

Paste and position on bottom left

Select Bottle Element - resize by 40%

Paste and position on the bottom left

Select Jewel Element - resize by 65%

Paste and position on bottom left

Select Lipgloss Element - resize by 45%

Paste and position on the bottom

Select LP Element - resize by 40%

Paste and position on the bottom

Select Barchair Element - resize by 50%

Paste and position on the bottom

Select Eyelash 2 Element - resize by 40%

Paste and position on the bottom

Select Brush Element - resize by 40%

Paste and position on the bottom

Select Bottle 2 Element - resize by 42%

Paste and position on the bar element

Select Clutch Element - resize by 40%

Paste and position on the bar element

Select Flower 2 Element - resize by 22%

Paste and position on the bar element

Select Glasses Element - resize by 30%

Paste and position on the bar element

Select Lips Element - resize by 55%

Paste and position on the bar element

Paste paper 8 on canvas

Apply Mask 78 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, June 18, 2015

MISS DISGUSTED



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Natasja" which you can get by going here

Grunge Mask 119 from Designs by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Cityscape Element - resize by 65%

Paste and position in the center of the canvas

Select Tree 2 Element - resize by 40%

Paste and position on the top center below cityscape element

Select Bokeh Element - resize by 28%

Paste and position on right side above cityscape element

Select Sparkles Element - resize by 65%

Paste and position on left side above cityscape

Select Cardboard Element - resize by 40%

Paste and position on the bottom left

Select Graffiti 2 Element - resize by 40%

Paste and position on bottom left

Select Car Element - resize by 45%

Paste and position on bottom left

Select Boot Element - resize by 30%

Paste and position on bottom left above car element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Lipstick Element - resize by 40%

Paste and position on the bottom

Select Pants Element - resize by 40%

Image Free Rotate Left by 15% and paste on bottom where desired

Select Clock Element - resize by 40%

Paste and position on the bottom

Select Glasses Element - resize by 40%

Paste and position on the bottom

Select Feather 2 Element - resize by 35%

Paste and position on the bottom right

Select Box 2 Element - resize by 35%

Image Free Rotate Left by 15% and paste on bottom right below tube

Select Belt Element - resize by 30%

Paste and position on the bottom right

Select Bracelet Element - resize by 30%

Paste and position on bottom right

Select Flower Element - resize by 35%

Paste and position on the bottom

Select Butterfly 2 Element - resize by 50%

Paste and position on top left

Select WA3 Element -resize by 65%

Paste and position on left side where desired

Select Net Element - resize by 40%

Paste and position on the left side and move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 119 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, June 17, 2015

POWER GIRL



Supplies needed:

I am using the stunning artwork from The Hunter for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Schnegge Productions called "Power Girl" which you can get by going here

Mask 17 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 2 - resize by 65%

Paste and position in the center of the canvas and move up about 2 inches from top

Select Element 13 - resize by 35%

Paste and position on top right below brick building element

Select Element 27 - resize by 30%

Paste and position on top right

Select Element 36 - resize by 30%

Paste and position on top left

Select Element 63 - resize by 40%

Image Free Rotate Right by 15% and paste on left side

Select Element 12 - resize by 40%

Paste and position on bottom right

Select Element 65 - resize by 40%

Paste and position on right side below barrels element

Select Element 56 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 57 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 55 - resize by 35%

Paste and position on bottom left

Select Element 62 - resize by 30%

Paste and position on bottom left

Select Element 59 - resize by 40%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 53 - resize by 30%

Paste and position on the bottom

Select Element 39 - resize by 35%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 64 - resize by 30%

Paste and position on the bottom

Select Element 61 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 3 - resize by 35%

Paste and position on the bottom

Paste paper 10 on canvas

Apply Mask 17 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, June 16, 2015

SUMMER FANTASY



Supplies needed:

I am using the stunning artwork from Very Many for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Summer Fantasy" which you can get by going here

Mask 111 from Designs by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 16, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 89 - resize by 40%

Paste and position on the right side of the canvas

Select Element 27 - resize by 35%

Paste and position on left side where desired

Select your magic wand tool and select the square window portions of the window frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 24

Select invert, delete select none

Move paper layer below window frame layer

Select Element 178 - resize by 45%

Paste and position on top left below frame

Select Element 191 - resize by 30%

Paste and position on top left below the window frame

Select Element 5 - resize by 18%

Image Free Rotate Left and paste on top left

Select Element 99 - resize by 15%

Image Free Rotate Left by 15% and paste on top right

Select Element 186 - resize by 45%

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 20%

Paste and position on right side

Select Element 168 - resize by 25%

Paste and position on bottom left

Select Element 32 - resize by 12%

Paste and position on bottom left

Select Element 52 - resize by 25%

Paste and position on bottom left

Select Element 112 - resize by 12%

Paste and position on bottom left

Select Element 16 - resize by 15%

Paste and position on the bottom

Select Element 37 - resize by 12%

Paste and position on the bottom

Select Element 36 - resize by 15%

Paste and position on the bottom

Select Element 171 - resize by 12%

Paste and position on the bottom

Select Element 21 - resize by 12%

Paste and position on the bottom

Select Element 169 - resize by 15%

Paste and position on the bottom right

Select Element 2 - resize by 15%

Paste and position on bottom right

Select Element 40 - resize by 20%

Paste and position on bottom right

Select Element 113 - resize by 12%

Paste and position on bottom right

Select Element 50 - resize by 15%

Paste and position on bottom right

Select Element 7 - resize by 15%

Paste and position on bottom right

Paste paper 48 on canvas

Apply Mask 111 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, June 15, 2015

MELODY DE MAYET



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Bibi's Collections called "Melody De Mayet" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 63 - resize by 65%

Paste and position in the center of the canvas

Select Element 23 - resize by 45%

Paste and position in the center of the canvas

Select Element 107 - resize by 45%

Paste and position right side below the bridge element

Select Element 22 - resize by 40%

Image mirror and paste on the right side below bridge element

Select Element 16 - resize by 55%

Paste and position on the left side below bridge element

Select Element 99 - resize by 18%

Paste on right side below bridge element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 65 - resize by 30%

Paste and position on left side

Select Element 24 - resize by 25%

Paste and position on left side

Select Element 89 - resize by 15%

Paste and position on bottom left

Select Element 5 - resize by 25%

Paste and position on bottom left

Select Element 17 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 37 - resize by 35%

Paste and position on bottom left

Select Element 97 - resize by 40%

Paste and position on top right

Select Element 6 - resize by 15%

Paste and position on right side

Select Element 38 - resize by 15%

Paste and position on the bottom right

Select Element 18 - resize by 35%

Paste and position on the bottom right

Select Element 47 - resize by 20%

Paste and position on the bottom right

Select Element 36 - resize by 15%

Paste and position on the bottom below tube layer

Select Element 109 - resize by 25%

Paste and position on the top left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, June 14, 2015

MILITARY BABE



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Military Burlesque" which you can get by going here

Mask 328 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Screen Element 61 - resize by 75%

Paste and position in the center of the canvas

Select Barb Wire Element - resize by 40%

Paste and position in the center of the screen element

Select Tank 3 Element - resize by 75%

Paste and position on the bottom of the screen

Select Plane Element - resize by 30%

Paste and position on top right

Select Lips Element - resize by 65%

Image Free Rotate Left by 15% and paste on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select WA Element - resize by 65%

Paste and position on right side

Select Corset 2 Element - resize by 45%

Image Free Rotate Left by 15% and paste on left side below tank element

Select Rosette Element - resize by 35%

Paste and position on bottom left

Select Bottle Element - resize by 35%

Paste and position on bottom left

Select Granate Element - resize by 35%

Paste and position on bottom left

Select Lipstick Element - resize by 45%

Paste and position on bottom left

Select Cap Element - resize by 40%

Paste and position on bottom left

Select Jewelry Box Element - resize by 25%

Paste and position on the left side above tank element

Select Gun Element - resize by 35%

Paste and position on the right side above tank element

Select Ammobox Element - resize by 35%

Paste and position on the bottom right

Select Jewel Element - resize by 75%

Paste and position on the bottom right above ammo box

Select Boot Element - resize by 35%

Paste and position on the bottom right above the ammo box

Select Bullet Element - resize by 45%

Paste and position on bottom right

Select Compass Element - resize by 40%

Paste and position on bottom right

Select Flowers Element - resize by 30%

Paste and position on right side above tank element

Select Butterfly Element - resize by 50%

Image Free Rotate Left by 15% and paste on top left

Paste paper 2 on canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

AMERICAN BEAUTY



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Schnegge called "Beauty American" which you can get by going here

Patriotic Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 61 - resize by 80%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice

Paste close-up tube of choice on color/gradient layer

Select invert, delete, select none

Change close-up to Luminance (Legacy)

Apply dropshadow and Merge down on color layer

Effect, Texture Effects, Blinds (Width 2, Opacity 20, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 66 - resize by 60%

Paste and position on right side below frame

Select Element 13 - resize by 45%

Paste and position on top right

Select Element 12 - resize by 35%

Paste and position on top right

Select Element 58 - resize by 35%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 59 - resize by 45%

Paste and position on bottom right

Select Element 51 - resize by 35%

Paste and position on bottom right below car element

Select Element 38 - resize by 25%

Paste and position on bottom right

Select Element 46 - resize by 40%

Image Free Rotate Left by 15% and paste on left side

Select Element 64 - resize by 40%

Paste and position on bottom left

Select Element 70 - resize by 35%

Paste and position on bottom left

Select Element 48 - resize by 20%

Paste and position on bottom left

Select Element 69 - resize by 25%

Paste and position on the bottom left

Select Element 54 - resize by 30%

Paste and position on the bottom

Select Element 47 - resize by 30%

Paste and position on the bottom

Select Element 39 - resize by 25%

Paste and position on the bottom

Select Element 45 - resize by 25%

Paste and position on the bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

MERMAID TALES



Supplies needed:

I am using the stunning artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Mermaid Tales" which you can get by going here

Mask 451 from Vix which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Stones Element - resize by 80%

Paste and position in the center of the canvas

Select Deco 5 Element - resize by 40%

Paste and position on top of the stones element

Select Deco Element - resize by 45%

Paste and position on top of stones element

Select Sea Anemone 4 Element - resize by 25%

Paste and position on right side

Select Deco 4 Element - resize by 40%

Paste and position on bottom right

Select Water Element - resize by 55%

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Fish 3 Element - resize by 30%

Paste and position on top where desired

Select Fish 7 Element - resize by 45%

Paste and position on the top right

Select Dolphin Element - resize by 45%

Image Free Rotate Left by 15% and paste on the top left

Select Goble 3 Element - resize by 25%

Paste and position on the top left

Select Plant 2 Element - resize by 30%

Paste and position on bottom where desired

Image duplicate and resize by 75% and move to bottom right

Select Starfish 4 Element - resize by 30%

Paste and position on the bottom right side

Select Shell 11 Element - resize by 18%

Paste and position on the bottom right

Select Crab Element - resize by 35%

Paste and position on the bottom right

Select Stones 2 Element - resize by 35%

Paste and position on the bottom left

Select Sea Anemone 7 Element - resize by 25%

Image mirror and paste on bottom left

Select Shelle 2 Element - resize by 35%

Paste and position on the bottom left

Select Shell 12 Element - resize by 35%

Paste and position on the bottom left

Select Shell 10 Element - resize by 20%

Paste and position on the bottom left

Select Seahorse Element - resize by 30%

Paste and position on the bottom left

Select Wheel Element - resize by 30%

Paste and position on the bottom where desired

Select Crab 2 Element - resize by 40%

Paste and position on the bottom where desired

Select Shell 3 Element - resize by 30%

Paste and position on the bottom where desired

Select Bottle Element - resize by 35%

Paste and position on the bottom where desired

Select Fish 8 Element - resize by 50%

Paste and position on left side

Paste paper 7 on canvas

Apply Mask 451 or mask of choice

Merge group and move to the bottom layer

Select Bubbles Element - resize by 30%

Paste and position on left side

Image duplicate, mirror and resize by 75%

Reposition on top right where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, June 11, 2015

ALFAMERMAID



Supplies needed:

I am using the stunning artwork from Alfadesire for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "AlfaMermaid" which you can get by going here

Mask 79 from Designs by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 11, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 87 - resize by 65%

Paste and position in the center of the canvas

Select Element 17 - resize by 50%

Paste and position on top right

Select Element 41 - paste and position on bottom right

Select Element 88 - resize by 45%

Paste and position on bottom left

Select Element 62 - resize by 45%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 50%

Paste and position on top left

Select Element 89 - resize by 25%

Paste and position on the top where desired

Select Element 22 - resize by 55%

Paste and position on the top right

Select Element 26 - resize by 20%

Paste and position on the bottom left

Select Element 61 - resize by 45%

Paste and position on the right side

Select Element 25 - resize by 20%

Paste and position on the right side

Select Element 90 - resize by 55%

Paste and position on the bottom right

Select Element 67 - resize by 20%

Paste and position on the bottom right

Select Element 24 - resize by 40%

Paste and position on the bottom right

Select Element 16 - resize by 20%

Paste and position on bottom right

Select Element 18 - resize by 25%

Paste and position on the bottom

Select Element 94 - resize by 30%

Paste and position on the bottom

Select Element 18 - resize by 22%

Paste and position on the bottom

Select Element 92 - resize by 20%

Paste and position on the bottom

Select Element 33 - resize by 50%

Paste and position in the center of the canvas where desired

Paste paper 8 on canvas

Apply Mask 79 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SWEET SIREN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designs by Joan called "Sweet Siren" which you can get by going here

Mask 111 from Designs by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 11, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 23 - paste and position in the center of the canvas

Select Element 10 - resize by 75%

Paste and position in the center of the canvas

Select Element 80 - resize by 30%

Paste and position on top where desired

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 35%, Monochrome unchecked)

Select Element 34 - resize by 45%

Paste and position on top right

Select Element 72 - resize by 40%

Paste and position on right side

Select Element 42 - resize by 30%

Paste and position on bottom right

Select Element 9 - resize by 45%

Paste and position on bottom where desired

Select Element 75 - resize by 25%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 30 - resize by 25%

Paste and position on right side

Select Element 14 - resize by 20%

Paste and position on bottom right

Select Element 50 - resize by 25%

Paste and position on bottom right below tube

Select Element 60 - resize by 15%

Paste and position on bottom right below tube

Select Element 69 - resize by 25%

Paste and position on bottom left below anchor element

Select Element 37 - resize by 22%

Paste and position on bottom left

Select Element 52 - resize by 20%

Paste and position on left side

Select Element 41 - resize by 20%

Paste and position on top left

Paste paper 2 on canvas

Apply Mask 111 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, June 10, 2015

TOXIC PINK



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Toxic Pink Babe" which you can get by going here

Mask 36 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 10, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 72 - resize by 125%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center the square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Paste paper 6

Select invert, delete

Paste close-up tube of choice on paper layer

Delete, select none

Change close-up to Luminance (Legacy) and drop opacity down to 75%

Apply dropshadow and Merge down on paper layer

Move paper layer below frame layer

Select Element 74 - resize by 45%

Paste and position on top of frame

Select Element 28 - resize by 22%

Paste and position on top left

Select Element 39 - resize by 40%

Paste and position on bottom left

Select Element 18 - resize by 25%

Paste and position on bottom left

Select Element 38 - resize by 25%

Paste and position on bottom left

Select Element 3 - resize by 35%

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 40%

Paste and position on bottom right

Select Element 36 - resize by 40%

Paste and position on right side below barrel element

Select Element 26 - resize by 25%

Paste and position on top of barrel element

Select Element 53 - resize by 25%

Paste and position on bottom right

Select Element 12 - resize by 25%

Paste and position on bottom right

Select Element 16 - resize by 25%

Paste and position on bottom right

Select Element 27 - resize by 22%

Paste and position on bottom right

Select Element 33 - resize by 15%

Paste and position on the bottom right

Select Element 13 - resize by 35%

Paste and position on left side of barrel element

Select Element 65 - resize by 50%

Image mirror and paste on top right - move to bottom layer

Image duplicate, mirror and flip

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 36 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, June 8, 2015

STEAMPUNK GWEN



Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Celine" which you can get by going here

Mask 124 from Bitzy Beez Designz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 8, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 120%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center the square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 14

Select invert, delete

Paste close-up tube of choice on paper layer

Delete, select none

Change close-up to Luminance (Legacy) and add dropshadow

Merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Parasol Element - resize by 50%

Paste and position on top left

Select Flower Leaves Element - resize by 45%

Paste and position on top left

Select Flower Deco 2 Element - resize by 30%

Paste and position on top right

Select Butterfly 2 Element - resize by 55%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Cogs Element - resize by 40%

Paste and position on right side

Image duplicate and mirror and flip

Reposition on left side where desired

Select Corset Element - resize by 55%

Image Free Rotate Right by 15% and paste on right side

Select Chair Element - resize by 45%

Paste and position on bottom left

Select Hat 2 Element - resize by 35%

Paste and position on chair element

Select Flower 2 Element - resize by 45%

Paste and position on bottom left

Select Boot Element - resize by 50%

Paste and position on bottom left

Select Books Element - resize by 45%

Paste and position on bottom left

Select Deco 3 Element - resize by 35%

Paste and position on top of books element

Select Jewel 2 Element - resize by 35%

Paste and position on bottom left

Select Button Element - resize by 55%

Image Free Rotate Left by 15% and paste on bottom left

Select Cog 6 Element - resize by 35%

Paste and position on the bottom

Select Flower 7 Element - resize by 25%

Paste and position on the bottom

Select Deco Element - resize by 30%

Paste and position on the bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 124 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, June 7, 2015

SHARON



Supplies needed:

I am using the stunning artwork from Carpe Diem for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags Creations called "Sharon" which you can get by going here

DMask 6 from Gina Gems which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 7, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 2 - resize by 55%

Paste and position in the center of the canvas

Select Element 62 - resize by 55%

Paste and position on top left below bar element

Select Element 7 - resize by 55%

Paste and position on top right below bar element

Select Element 54 - resize by 20%

Paste and position on top right

Select Element 27 - resize by 65%

Paste and position in the center of canvas where desired

Select Element 11 - resize by 50%

Paste and position in the center of canvas

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 65%

Paste and position on the bottom where desired

Select Element 53 - resize by 45%

Paste and position on bottom right

Select Element 26 - resize by 18%

Paste and position on bottom right

Select Element 16 - resize by 20%

Paste and position on bottom right

Select Element 17 - resize by 15%

Image mirror and paste on bottom right

Select Element 41 - resize by 15%

Paste and position on bottom right

Select Element 33 - resize by 12%

Paste and position on bottom right

Select Element 35 - resize by 15%

Paste and position on bottom right

Select Element 43 - resize by 15%

Paste and position on the bottom

Select Element 6 - resize by 20%

Paste and position on bottom left

Select Element 61 - resize by 22%

Paste and position on bottom left

Select Element 45 - resize by 12%

Paste and position on bottom left

Select Element 34- resize by 15%

Paste and position on bottom left

Select Element 38 - resize by 15%

Paste and position on bottom left

Select Element 65 - resize by 15%

Paste and position on bottom left

Select Element 32 - resize by 20%

Paste and position on left side

Select Element 3 - resize by 15%

Paste and position on right side above bar element

Paste paper 1 on canvas

Apply Mask 6 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, June 3, 2015

MIDNIGHT SERENADE



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can get free with a $5.00 purchase here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Patrizia Fairy" which you can get by going here

Mask 252 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on June 3, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 98 - resize by 68%

Paste and position in the center of the canvas

Select Element 43 - resize by 85%

Paste and position on the top left

Select Element 76 - resize by 40%

Paste and position on the right hand side

Select Element 66 - resize by 35%

Paste and position on top right

Select Element 106 - resize by 55%

Paste and position on top right

Select Element 103 - resize by 50%

Paste and position on bottom right above staircase layer

Select Element 30 - resize by 40%

Paste and position on the center right

Select Element 71 - resize by 25%

Paste and position on right side below staircase elememt

Select Element 92 - resize by 40%

Paste and position on center lefthand side

Select Element 37 - resize by 35%

Paste and position on top left

Select Element 38 - resize by 30%

Image Free Rotate Right by 15% and paste on top left

Select Element 107 - resize by 40%

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 68 - resize by 30%

Image mirror and flip and paste on bottom left

Select Element 2 - resize by 35%

Paste and position on bottom left

Select Element 80 - resize by 25%

Paste and position on bottom right

Select Element 85 - resize by 40%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 32 - resize by 40%

Paste and position on bottom right

Select Element 86 - resize by 35%

Paste and position on bottom right

Select Element 111 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 110 - resize by 25%

Paste and position on bottom right

Select Element 105 - resize by 25%

Paste and position on the bottom right

Select Element 104 - resize by 15%

Paste and position on bottom where desired

Paste paper 4 on canvas

Apply Mask 252 or mask of choice

Merge group and move to the bottom layer

Select Element 74 - resize by 40%

Paste and position on bottom right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif