I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Monday, August 31, 2015

EMO LOLLIPOP




Supplies needed:

I am using the stunning artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Bibi's Collections called "Emo Lollipop" which you can get by going here

Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 31, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 51 - resize by 6%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below window frame layer

Select Element 22 - resize by 20%

Paste and position in the center of the canvas

Apply Mura Meister Copies with the following settings:

Select Element 41 - resize by 50%

Paste and position on the top left

Select Element 35 - resize by 45%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 25%

Paste and position on the left above bench element

Select Element 2 - resize by 25%

Paste and position on the left above bench element

Select Element 21 - resize by 55%

Paste and position on the bottom right

Select Element 39 - resize by 50%

Paste and position on the bottom right

Select Element 49 - resize by 40%

Paste and position on the bottom right

Select Element 50 - resize by 35%

Paste and position on the bottom right

Select Element 31 - resize by 40%

Paste and position on the bottom left

Select Element 17 - resize by 25%

Paste and position on the bottom left

Select Element 7 - resize by 25%

Paste and position on the bottom left

Select Element 12 - resize by 20%

Paste and position on the bottom left

Select Element 5 - resize by 25%

Paste and position on the bottom left

Select Element 1 - resize by 25%

Paste and position on the bottom

Paste paper 5 on canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ORANGE AUTUMN



Supplies needed:

I am using the stunning artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Orange Autumn" which you can get by going here

Mask 275 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 31, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Hard Light and drop opacity down to 70%

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Element 56 - resize by 50%

Paste and position on the top left

Select Element 43 - resize by 35%

Paste and position on the top where desired

Select Element 57 - resize by 65%

Paste and position on the right side

Select Element 60 - resize by 65%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 59 - resize by 25%

Paste and position on the left above bench element

Select Element 2 - resize by 25%

Paste and position on the left above bench element

Select Element 21 - resize by 20%

Paste and position on the left above bench element

Select Element 12- resize by 35%

Paste and position on the bottom right below lamp post element

Select Element 41 - resize by 30%

Paste and position on the bottom right

Select Element 42 - resize by 20%

Paste and position on the bottom right

Select Element 46 - resize by 20%

Paste and position on the bottom left

Select Element 19 - resize by 25%

Paste and position on the bottom left

Select Element 9 - resize by 25%

Paste and position on the bottom left

Select Element 31 - resize by 25%

Paste and position on the bottom left

Select Element 15 - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 5 - resize by 25%

Paste and position on the bottom where desired

Select Element 26 - resize by 20%

Paste and position on the bottom

Select Element 65 - resize by 40%

Paste and position on the bottom

Select Element 11 - resize by 30%

Image mirror and paste on right side where desired

Paste paper 5 on canvas

Apply Mask 275 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, August 29, 2015

FAIRY COVE




Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Creative Scraps by Crys called "Fairy Cove" which you can get by going here

Exclusive Mask from Witchysheart which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 29, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 90%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below window frame layer

Select Element 13 - resize by 65%

Paste and position on the bottom

Select Element 6 - resize by 40%

Paste and position on the top right

Select Element 55 - resize by 35%

Paste and position on the bottom right

Select Element 66 - resize by 25%

Paste and position on the bottom right

Select Element 68 - resize by 25%

Paste and position on the bottom right above mushroom element

Select Element 4 - resize by 50%

Paste and position on the bottom left

Select Element 49 - resize by 40%

Paste and position on the bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 14 - resize by 45%

Paste and position on the bottom right

Select Element 67 - resize by 25%

Paste and position on the bottom right

Select Element 44 - resize by 30%

Paste and position on the bottom right

Select Element 50 - resize by 20%

Paste and position on the bottom left

Select Element 36 - resize by 20%

Paste and position on the bottom left

Select Element 18 - resize by 40%

Image Free Rotate Right by 15% and paste on top right

Select Element 65 - resize by 22%

Image Free Rotate Right by 15% and paste on top left

Select Element 1 - resize by 20%

Paste and position on the top right

Select Element 9 - resize by 25%

Image Free Rotate Right by 15% and paste on top right

Add new raster layer and flood-fill with color or gradient of choice

Apply Exclusive Mask or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, August 26, 2015

SHOOTING STARS



Supplies needed:

I am using the stunning artwork from Jasmine Becket-Griffith for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Foxy's Designz called "Shooting Stars" which you can get by going here

Exclusive Mask from Witchysheart which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 26, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice

Select invert

Paste close-up tube on top of color layer where desired and delete

Select none

Change close-up tube to Luminance (Legacy)

Apply drop shadow and merge down on color layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Move layer below window frame layer

Select Element 41 - resize by 20%

Paste and position in the center of the canvas

Apply Mura Meister Copies with the following settings:

Select Element 35 - Paste and position in the center of the canvas above flower circle

If desired apply a thin Gradient Glow on default settings

Select Element 15 - resize by 55%

Paste and position on the top where desired

Select Element 18 - resize by 40%

Image mirror and paste on the bottom right

Select Element 3 - resize by 25%

Paste and position on the right side below bridge element

Select Element 37 - resize by 65%

Image Free Rotate Right by 15% and paste on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 29 - resize by 35%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 31 - resize by 45%

Paste and position on the bottom right

Select Element 34 - resize by 50%

Paste and position on the bottom

Select Element 14 - resize by 30%

Paste and position on the bottom right

Select Element 16 - resize by 45%

Paste and position on the bottom where desired

Select Element 28 - resize by 45%

Image Free Rotate Right by 15% and paste on the top right

Select Element 32 - resize by 80%

Image mirror and paste on the bottom right below tube layer

Paste paper 10 on canvas

Apply Heart Burst Mask or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, August 25, 2015

SENSUAL ANGEL


Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Sensual Angel" which you can get by going here

Mask 22 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 25, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 53 - resize by 60%

Paste and position in the center of the canvas

Select Element 60 - resize by 65%

Image mirror and Paste on the left side below element 53

Select Element 14 - resize by 60%

Paste and position on the right side below element 53

Select Element 47 - resize by 30%

Image mirror and paste on the left side

Select Element 61 - resize by 40%

Paste and position on the bottom

Select Element 70 - resize by 25%

Paste and position on the bottom

Select Element 69 - resize by 30%

Paste and position on the bottom left

Image duplicate and mirror

Select Element 17 - resize by 35%

Paste and position on the top right

Select Element 76 - resize by 40%

Paste and position on the top right

Select Element 27 - resize by 35%

Paste and position on the top right

Select Element 66 - resize by 30%

Image mirror and paste on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 58 - resize by 30%

Paste and position on the bottom right

Select Element 80 - resize by 25%

Paste and position on the bottom right

Select Element 71 - resize by 40%

Paste and position on the bottom right

Select Element 77 - resize by 40%

Paste and position on the bottom left

Select Element 84 - resize by 30%

Image mirror and paste on the bottom left

Select Element 87 - resize by 25%

Paste and position on the bottom left

Select Element 34 - resize by 25%

Paste and position on the bottom left

Select Element 35 - resize by 30%

Paste and position on the bottom left

Select Element 5 - resize by 20%

Paste and position on the bottom left

Select Element 42 - resize by 15%

Paste and position on the top right

Select Element 44 - resize by 25%

Paste and position on the top left

Paste paper 8 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ANGEL DREAMS


Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Angel Dreams" which you can get by going here

Floral Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 25, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Luminance (Legacy) and drop opacity down to 80%

Apply drop shadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Flower Element 2 - resize by 30%

Paste and position in the center of the canvas

Apply Mura Meister Copies with the following settings:

Select Greenery 5 Element - resize by 30%

Paste and position on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Hat Element - resize by 30%

Paste and position on the bottom right

Select Purse Element - resize by 35%

Paste and position on the bottom right

Select Perfume Element - resize by 40%

Paste and position on the bottom right

Select Powder Element - resize by 40%

Paste and position on the bottom right

Select Powderbrush Element - resize by 30%

Paste and position on the bottom right

Select Lipstick Element - resize by 40%

Paste and position on the bottom right

Select Wing Element - resize by 25%

Paste and position on the bottom left

Select Jewel 2 Element - resize by 35%

Paste and position on the bottom left

Select Diamond Element - resize by 50%

Image mirror and paste on the bottom left

Select FurAngel Element - resize by 45%

Paste and position on the bottom

Select Button 2 Element - resize by 65%

Paste and position on the bottom

Select Butterfly Element - resize by 50%

Image Free Rotate Right by 15% and paste on the right side

Add new raster layer and flood-fill with color or gradient of choice

Apply Floral 2 Mask or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, August 23, 2015

THE CHAOS WITHIN

The Chaos Within ~ This Is A CT Inspired Kit Made Especially For Me by my talented friend and designer Jessica from Gothic Inspirations. This Kit is Stunning and a must have to your collection. It comes with 80 Elements-14 Papers and so much more. This Kit Is Personal Use Only And Is Available To Purchase From Gothic Inspirations here


 

 Jessica has also created some gorgeous Clusters for this kit which you can grab here


Here are some gorgeous timelines and tags made by Jessica and Julie






Saturday, August 22, 2015

BRONZE ANGEL



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags Creations called "Bronze Angel" which you can get by going here

Heart Burst Mask from Essex Girl which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 22, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Multiply and drop opacity down to 70%

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Frame Element 3 - resize by 65%

Paste and position on top of Frame 1

Select Element 59 - resize by 30%

Image Free Rotate left by 15% and paste on top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 45 - resize by 18%

Paste and position on the top left

Select Element 25 - resize by 35%

Image Free Rotate Right by 10% and paste on top right below frame element

Select Element 26 - resize by 45%

Paste and position on the right side

Select Element 33 - resize by 25%

Paste and position on the top right

Select Element 23 - resize by 25%

Image mirror and paste on the bottom right below the column element

Select Element 36 - resize by 20%

Paste and position on the bottom right

Select Element 43 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 53 - resize by 15%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 71 - resize by 12%

Paste and position on the bottom right

Select Element 11 - resize by 12%

Paste and position on the bottom right

Select Element 69 - resize by 40%

Paste and position on the bottom left

Select Element 17- resize by 12%

Paste and position on the bottom left below the violin element

Select Element 39 - resize by 20%

Paste and position on the bottom left

Select Element 74 - resize by 15%

Paste and position on the bottom left

Select Element 48 - resize by 20%

Paste and position on the bottom

Select Element 42 - resize by 20%

Paste and position on the bottom

Select Element 3 - resize by 25%

Paste and position on the bottom

Paste paper 3 on canvas

Apply Heart Burst Mask or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, August 18, 2015

CANDY SUE



Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called " Candyland Fairy" which you can get by going here

Mask 35 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 18, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 21

Select invert, delete, select none

Move paper layer below frame

Select Frame Element 15 - resize by 60%

Paste and position above the frame 2 element

Select Element 72 - resize by 40%

Paste and position on top left

Select Element 148 - resize by 50%

Paste and position on the top left

Select Element 7 - resize by 25%

Paste and position on the top left

Select Element 141 - resize by 40%

Image mirror and paste on top where desired

Select Element 5 - resize by 20%

Paste and position on the top

Select Element 91 - resize by 35%

Image mirror and paste on the right side

Select Element 81 - resize by 40%

Paste and position on the bottom

Select Element 70 - resize by 25%

Paste and position on the bottom below bench element

Select Element 80 - resize by 30%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 22%

Paste and position on the bottom right

Select Element 128 - resize by 25%

Paste and position on the bottom right

Select Element 56 - resize by 18%

Paste and position on the bottom right

Select Element 22 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 21 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 107 - resize by 25%

Paste and position on the bottom left

Select Element 106 - resize by 30%

Paste and position on the bottom left

Select Element 48 - resize by 20%

Paste and position on the bottom left

Select Element 12 - resize by 30%

Paste and position on the bottom left

Select Element 65 - resize by 15%

Paste and position on the bottom left

Select Element 2 - resize by 45%

Paste and position on the bottom above bench element

Select Element 20 - resize by 10%

Paste and position on the bottom above bench element

Select Element 13 - resize by 15%

Paste and position on the bottom

Select Element 54 - resize by 13%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 129 - resize by 20%

Paste and position on the bottom below tube layer

Select Element 15 - resize by 15%

Paste and position on the bottom

Select Element 10 - resize by 20%

Paste and position on the bottom

Select Element 43 - resize by 15%

Paste and position on the bottom

Select Element 49 - resize by 20%

Paste and position on the bottom

Select Element 9 - resize by 20%

Paste and position on top left

Select Element 1 - resize by 15%

Paste and position on bottom left above mushroom element

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 35 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, August 16, 2015

SKATER GIRL



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Schnegge called "Green Skate" which you can get by going here

Mask 40 from Becky which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 16, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 48 - resize by 50%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each square window if desired (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select none

Select Element 19 - resize by 50%

Paste and position on the right side

Select Element 31 - resize by 45%

Paste and position on the bottom where desired

Select Element 25 - resize by 50%

Paste and position on the left side

Select Element 52 - resize by 40%

Paste and position on the top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 12 - resize by 45%

Image Free Rotate Right by 15% and paste on top right

Select Element 20 - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 40%

Paste and position on the bottom left

Select Element 34 - resize by 40%

Paste and position on the bottom left

Select Element 56 - resize by 25%

Paste and position on bottom left above element 34

Select Element 53 - resize by 25%

Paste and position on the bottom left

Select Element 57 - resize by 25%

Paste and position on the bottom left

Select Element 58 - resize by 25%

Paste and position on the bottom left

Select Element 45 - resize by 30%

Paste and position on the bottom

Select Element 59 - resize by 25%

Paste and position on the bottom

Select Element 50 - resize by 40%

Paste and position on the bottom

Select Element 61 - resize by 25%

Paste and position on the bottom

Select Element 51 - resize by 25%

Paste and position on the bottom

Select Element 22 - resize by 95%

Paste and position on the top of the canvas and move to the bottom layer

Paste paper 4 on canvas

Apply Mask 40 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, August 13, 2015

BEAUTIFUL ASIAN



Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Bibi's Collections called "Beautiful Asian" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 13, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 24 - resize by 65%

Paste and position on the top left of canvas

Select Element 1 - resize by 60%

Paste and position on the top right below element 24

Select Element 27 - resize by 50%

Paste and position on the bottom right

Select Element 33 - resize by 50%

Paste and position on the bottom left

Select Element 47 - resize by 30%

Paste and position on the right side

Select Element 53 - resize by 50%

Paste and position on the left side

Select Element 78 - resize by 25%

Paste and position on the bottom right

Select Element 89 - resize by 40%

Paste and position on the bottom right

Select Element 11 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 40%

Paste and position on the bottom right

Select Element 59 - resize by 55%

Paste and position on the bottom below tube layer

Select Element 17 - resize by 65%

Paste and position on the bottom below tube layer

Select Element 36 - resize by 30%

Paste and position on the bottom left

Select Element 40 - resize by 55%

Paste and position on the bottom below element 36

Select Element 71 - resize by 25%

Paste and position on the bottom left

Select Element 21 - resize by 35%

Paste and position on the bottom left

Select Element 48 - resize by 30%

Paste and position on the bottom

Select Element 28 - resize by 30%

Image mirror and paste on the top where desired

Select Element 74 - resize by 25%

Paste and position on the top left

Select Element 57 - resize by 20%

Image Free Rotate Left by 15% and paste on top right

Select Element 6 - resize by 40%

Image mirror and paste on the bottom right below grass element

Paste paper 9 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

DARKNESS SPARKLES


Supplies needed:

I am using the wicked artwork from Dark Yarrow for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations "Darkness Sparkles" which you can get by going here

Exclusive Mask 1 from Witchyheart which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 10, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Parchment Element - resize by 85%

Select Deco Element - resize by 80%

Paste and position in the center of the canvas

Select Window Element - resize by 30%

Paste and position on the bottom right below deco element

Select Patterns Element - resize by 70%

Paste and position on top of deco element where desired

Select Tags Element - resize by 20%

Paste and position on the top right

Select Moon Element - resize by 30%

Paste and position on the top right

Select Tree 1 Element - resize by 45%

Paste and position on the top right

Select Owl Element - resize by 25%

Paste and position on the top right

Select Hills Element - resize by 40%

Paste and position on the bottom left

Select Ladder Element - resize by 55%

Paste and position on the left side

Select Flowers 4 Element - resize by 25%

Paste and position below ladder element

Select WA Cluster Element - resize by 40%

Paste and position on the top left

Select Suitcase Element - resize by 40%

Paste and postion on the bottom below ladder element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Rocks Element - resize by 55%

Paste and position on the bottom above tube layer

Select Umbrella Element - resize by 35%

Paste and position on the bottom right

Select Brushed Hearts Element - resize by 20%

Paste and position on the bottom right

Select Rose 2 Element - resize by 15%

Paste and position on the bottom right

Select Shroom 2 Element - resize by 65%

Paste and position on the left side

Select Magical Light Element - resize by 30%

Paste and position on the bottom left

Select Key Element - resize by 20%

Paste and position on the bottom left

Select Wand Element - resize by 30%

Paste and position on the bottom left

Select Butterfly Element - resize by 20%

Paste and position on the top left

Select Leaves 1 Element - resize by 25%

Paste and position on the bottom where desired

Paste paper 3 on canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, August 12, 2015

BROKEN



Supplies needed:

I am using the stunning artwork from Zindy S. Nielsen for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Foxy's Designz called "Broken" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 12, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 13

Select invert, delete, select none

Move paper layer below window frame layer

Select Frame Element 5 - resize by 70%

Paste and position in the center above frame 6

Select Element 17 - resize by 25%

Image Free Rotate Left by 15% and paste on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 40%

Paste and position on the bottom above tube layer

Select Element 53 - resize by 50%

Image Free Rotate Right by 15% and paste on right side

Select Element 28 - resize by 25%

Image Free Rotate right by 15% and paste on the bottom right

Select Element 40 - resize by 25%

Paste and position on the bottom right

Select Element 25 - resize by 25%

Paste and position on the bottom right

Select Element 22 - resize by 45%

Paste and position on the bottom

Select Element 34 - resize by 25%

Paste and position on the bottom

Select Element 29 - resize by 30%

Paste and position on the bottom

Select Element 30 - resize by 15%

Paste and position on the bottom

Select Element 32 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 52 - resize by 30%

Paste and position on the left side

Select Element 13 - resize by 25%

Paste and position on the bottom left

Select Element 45 - resize by 18%

Paste and position on the bottom

Select Element 15 - resize by 30%

Image mirror - Free Rotate Right by 15% and paste on the bottom left

Paste paper 3 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, August 10, 2015

STEAMPUNKD'



Supplies needed:

I am using the stunning artwork from Kate Miller for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Steampunkd" which you can get by going here

Mask 122 from Babs Bitzy Designz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 10, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Screen and drop opactity down to 80%

Apply drop shadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Move paper layer below window frame layer

Select Flower Element - resize by 30%

Paste and position in the center of the canvas

Apply Mura Meister Copies with the following settings:

Select WA Element - resize by 40%

Paste and position on the top left

Select Butterfly 3 Element - resize by 30%

Paste and position on the top left

Select Light Element - resize by 40%

Image mirror and paste on the left side

Select Dress Element - resize by 40%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Clock 4 Element - resize by 35%

Paste and position on the bottom right

Select Nail Laquer Element - resize by 30%

Paste and position on the bottom right

Select Powder Element - resize by 25%

Paste and position on the bottom right

Select Jewelry 7 Element - resize by 25%

Paste and position on the left side

Select Clock 3 Element - resize by 30%

Paste and position on the bottom left

Select Phone Element - resize by 30%

Paste and position on the bottom left

Select Flower 7 Element - resize by 25%

Paste and position on the bottom left

Select Jewelry Element - resize by 40%

Paste and position on bottom left

Select Hat Element - resize by 25%

Paste and position on the bottom

Select Cogs Element - resize by 40%

Paste and position on the bottom

Select Jewelry 3 Element - resize by 35%

Paste and position on the bottom below the cogs

Select Lipstick Element - resize by 30%

Image mirror and paste on the bottom

Paste paper 7 on canvas

Apply Mask 122 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, August 8, 2015

CARNIVAL FREAKSHOW



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Dark Carnival" which you can get by going here

Mask 22 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 8, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 27 - resize by 50%

Paste and position in the center of the canvas

Select Element 58 - resize by 85%

Paste and position on top of the canvas where desired

Select Frame Element 5 - resize by 55%

Paste and position in the center of the canvas

Image Free Rotate Right by 15% and reposition if desired

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Element 32 - resize by 35%

Paste and position on the bottom right

Select Element 25 - resize by 30%

Image mirror and paste on the bottom right

Select Element 106 - resize by 50%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 122 - resize by 15%

Paste and position on the bottom right

Select Element 33 - resize by 20%

Paste and position on the bottom right

Select Element 95 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 43 - resize by 40%

Paste and position on the bottom

Select Element 103 - resize by 30%

Paste and position on the bottom

Select Element 18 - resize by 40%

Image mirror and paste on the bottom left

Select Element 41 - resize by 65%

Paste and position on the bottom left

Select Element 126 - resize by 22%

Paste and position on top of the barrel element

Select Element 37 - resize by 40%

Paste and position on the bottom left

Select Element 99 - resize by 20%

Paste and position on the bottom left

Select Element 2 - resize by 25%

Paste and position on the bottom

Select Element 80 - resize by 18%

Paste and position on the top left

Select Element 118 - resize by 30%

Image mirror and paste on the top left

Paste paper 5 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, August 7, 2015

BLUE MERMAID




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Schnegge called "Mermaid Yellow Blue" which you can get by going here

Mask 10 from Melissaz Creations which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 7, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 59 - resize by 90%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Overlay

Apply drop shadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Move paper layer below window frame layer

Select Element 6 - resize by 40%

Paste and position on the right side above paper layer

Select Element 11 - resize by 40%

Paste and position on the right side

Select Element 68 - resize by 45%

Paste and position on the bottom right

Select Element 49 - resize by 30%

Paste and position on the bottom right

Select Element 47 - resize by 40%

Image mirror and paste on the bottom left

Select Element 25 - resize by 25%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 25%

Paste and position on the bottom right

Select Element 35 - resize by 30%

Paste and position on the right side where desired

Select Element 38 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 34 - resize by 30%

Paste and position on the bottom left

Select Element 40 - resize by 40%

Paste and position on the bottom below the tube layer

Select Element 50 - resize by 35%

Image Free Rotate Left by 15% and paste on the bottom below tube

Select Element 53 - resize by 30%

Paste and position on the bottom below the tube

Select Element 23 - resize by 25%

Paste and position on the bottom

Select Element 63 - resize by 40%

Paste and position on the bottom

Select Element 9 - resize by 30%

Paste and position on the bottom

Select Element 18 - resize by 30%

Paste and position on the left side

Select Element 43 - resize by 55%

Paste and position on the top left

Select Element 71 - resize by 30%

Image mirror and paste on the top right

Paste paper 7 on canvas

Apply Mask 10 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, August 6, 2015

SAMURAI HONOR




Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Samurai's Honor" which you can get by going here

Mask 11 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 6, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 31 - resize by 65%

Paste and position in the center of the canvas and move up about a 1/2 inch

Select Element 60 - resize by 75%

Paste and position in the center of element 31

Move paper layer below Element 31

Select Element 6 - resize by 65%

Paste and position on the top right and move to bottom layer

Select Element 1 - resize by 65%

Paste and position on the bottom

Select Element 83 - resize by 40%

Paste and position on the top right

Apply Eyecandy Gradient glow on fat default settings (Glow Width 3)

Select Element 37 - resize by 25%

Paste and position on the top left

Select Element 81 - resize by 40%

Paste and position on the top left

Apply Eyecandy Gradient glow on fat default settings (Glow Width 3)

Select Element 61 - resize by 40%

Paste and position on the bottom where desired

Select Element 27 - resize by 40%

Paste and position on the bottom where desired

Select Element 34 - resize by 20%

Paste and position on the bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 45%

Paste and position on the bottom right

Select Element 39 - resize by 40%

Paste and position on the right side below element 32

Select Element 73 - resize by 25%

Paste and position on the bottom right

Select Element 19 - resize by 20%

Paste and position on the bottom right

Select Element 67 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 28 - resize by 25%

Paste and position on the bottom right

Select Element 50 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 72 - resize by 25%

Paste and position on the bottom left

Select Element 26 - resize by 18%

Paste and position on bottom left

Select Element 17 - resize by 55%

Paste and position on the bottom left

Select Element 16 - resize by 15%

Paste and position on the bottom left

Select Element 40 - resize by 22%

Paste and position on the bottom

Select Element 49 - resize by 20%

Select Element 59 - resize by 25%

Image Free Rotate Right by 15% and paste on the top right

Paste paper 11 on canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, August 5, 2015

ALONG THE SHORELINE



Supplies needed:

I am using the stunning artwork from Alex Prihodko for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Kissing Kate called "Along the Shoreline" which you can get by going here

Mask 20 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 5, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 10 Element - paste and position in the center of the canvas

Select your freehand tool and select around the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Paste paper 2

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Burn

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Element 26 - resize by 80%

Paste and position on the top right above frame

Select Element 50 - resize by 30%

Paste and position on the top right

Select Element 11 - resize by 85%

Paste and position on the bottom below frame layer

Select Element 19 - resize by 50%

Paste and position on the left side

Select Element 44 - resize by 50%

Paste and position on the bottom right

Select Element 21 - resize by 65%

Image mirror and paste on the bottom right

Image Free Rotate Right by 8%

Select Element 49 - resize by 30%

Paste and position on the bottom right above boat element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 20%

Paste and position on the bottom right

Select Element 28 - resize by 30%

Paste and position on the bottom right

Select Element 18 - resize by 15%

Image mirror and paste on the bottom right

Select Element 12 - resize by 40%

Paste and position on the bottom left

Select Element 24 - resize by 40%

Paste and position on the bottom left

Select Element 42 - resize by 25%

Paste and position on the bottom left

Select Element 39 - resize by 30%

Paste and position on the bottom left

Select Element 9 - resize by 15%

Paste and position on the bottom left

Select Element 37 - resize by 25%

Paste and position on the bottom left

Select Element 2 - resize by 30%

Paste and position on the bottom left

Select Element 23 - resize by 30%

Paste and position on the bottom where desired

Select Element 41 - resize by 30%

Paste and position on the top left

Paste paper 4 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, August 4, 2015

INDIE


Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from CSDesigns called "Indie" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 4, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 30 - resize by 55%

Paste and position in the center of the canvas

Select Element 32 - resize by 20%

Image mirror and paste on top left

Select Element 41 - resize by 15%

Paste and position on the top left

Select Element 6 - resize by 35%

Paste and position on the right side

Select Element 9 - resize by 25%

Paste and position on the bottom center

Select Element 49 - resize by 40%

Paste and position on the bottom left

Select Element 10 - resize by 20%

Paste and position on the bottom center

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 39 - resize by 15%

Paste and position on the left side below bike element

Select Element 38 - resize by 30%

Paste and position on the bottom right

Select Element 5 - resize by 15%

Paste and position on the bottom right

Select Element 3 - resize by 15%

Image mirror and paste on the bottom right

Select Element 26 - resize by 35%

Paste and position on the bottom left

Select Element 20 - resize by 15%

Image mirror and paste on the bottom left

Select Element 7 - resize by 20%

Paste and position on the bottom left

Select Element 42 - resize by 20%

Paste and position on the bottom left

Select Element 50 - resize by 30%

Paste and position on the bottom

Select Element 33 - resize by 12%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif