I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Thursday, October 29, 2015

ZOMBIE DAYS



Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Zombie Days" which you can get by going here

Mask 4 from ButterflyFlutterby which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 29, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 34 - resize by 50%

Paste and position in the center of the canvas

Select Element 14 - resize by 40%

Paste and position on the top center

Select Element 47 - resize by 25%

Paste and position on the top right

Select Element 8 - resize by 50%

Paste and position on the bottom behind element 34

Select Element 33 - resize by 30%

Image Free Rotate Left by 15% and paste on the top left

Select Element 44 - resize by 40%

Paste and position on the bottom right side

Select Element 57 - resize by 405

Image Free Rotate Right by 15% and paste on the bottom right below cemetary element

Select Element 49 - resize by 15%

Paste and position on the mirror element

Select Element 70 - resize by 25%

Paste and position on the bottom right

Select Element 32 - resize by 45%

Paste and position on the left side

Select Element 66 - resize by 30%

Paste and position on the left side above the house element

Select Element 30 - resize by 45%

Paste and position on the bottom left

Select Element 73 - resize by 25%

Paste and position on the bottom left

Select Element 50 - resize by 20%

Paste and position on the house element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 15%

Paste and position on the bottom

Select Element 48 - resize by 30%

Paste and position on the bottom

Select Element 61 - resize by 25%

Paste and position on the bottom

Select Element 62 - resize by 25%

Paste and position on the bottom

Select Element 64 - resize by 25%

Image mirror and paste on the bottom

Select Element 36 - resize by 25%

Paste and position on the bottom left

Select Element 74 - resize by 15%

Paste and paste on the bottom left

Select Element 65 - resize by 30%

Paste and position on the bottom left

Paste paper 1 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, October 25, 2015

CANDY CORN WITCH




Supplies needed:

I am using the stunning artwork from Jasmine Becket Griffith - for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Foxy's Designz called "Jasmine Becket Griffith 19-2" which you can get by going here

Mask 7 from Rieka Rafita which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 25, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper layer below window frame layer

Select Element 8 - resize by 40%

Paste and position on the top left

Select WordArt1 Element - resize by 40%

Paste and position on the top left

Apply Gradient Glow on fat default setting (Glow width 3)

Select Element 19 - resize by 30%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 30%

Paste and position on the bottom right

Select Element 9 - resize by 30%

Paste and position on the bottom right

Select Element 18 - resize by 20%

Paste and position on the bottom right

Select Element 6 - resize by 30%

Paste and position on the bottom right

Select Element 2 - resize by 30%

Paste and position on the bottom

Select Element 7 - resize by 30%

Paste and paste on the bottom

Select Element 4 - resize by 25%

Paste and position on the bottom

Select Element 12 - resize by 40%

Paste and position on the bottom left

Select Element 17 - resize by 20%

Paste and position on the bottom left

Select Element 16 - resize by 20%

Paste and position on the bottom left

Select Element 5 - resize by 30%

Paste and position on the bottom left

Select Element 14 - resize by 30%

Paste and position on the bottom

Paste paper 4 on canvas

Apply Mask 7 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 24, 2015

DEADTIME DOLLY



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Dolly Deadtime" which you can get by going here

Mask 22 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 24, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Houses Element - resize by 65%

Paste and position in the center of the canvas

Select Tree Element - resize by 45%

Paste and position on the right side below houses element

Select Pile Element - resize by 40%

Paste and position on the bottom left

Select SkullgirlLM Element - resize by 25%

Paste and position on the left side above pile element

Select Greenery 4 Element - resize by 30%

Paste and position on the bottom left

Select Moon Element - resize by 35%

Paste and position on top right below houses element

Select Tombstone Element - resize by 30%

Paste and position on the bottom right

Select Candles Element - resize by 30%

Paste and position on the bottom right side

Select Blood Element - resize by 30%

Paste and position on top left

Select Deco 2 Element - resize by 40%

Paste and position on the bottom left

Select Fungis3 Element - resize by 25%

Paste and position on the bottom where desired

Select Eye Element - resize by 65%

Paste and position on the bottom

Select Book Element - resize by 25%

Paste and position on the bottom

Select Spider Element - resize by 25%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Bottles Element - resize by 30%

Paste and position on the bottom right

Select Blade 2 Element - resize by 30%

Paste and position on the bottom right

Select Cat Element - resize by 30%

Paste and position on the bottom right

Select Axe Element - resize by 30%

Paste and position on the bottom left

Select Key 2 Element - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom left

Select Goblet Element - resize by 30%

Paste and position on the bottom left

Select Pumpkin Element - resize by 30%

Paste and paste on the bottom left

Select Doll Element - resize by 35%

Paste and position on the bottom

Select Skull 3 Element - resize by 35%

Paste and position on the bottom

Select Bottle 2 Element - resize by 25%

Paste and position on the bottom

Paste paper 16 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, October 21, 2015

VAMPIRE GHOT



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designs by Joan called "Vampire Ghot" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 21, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Mask Element 40 - resize by 55%

Paste and position in the center of the canvas

Select Element 46 - resize by 65%

Image mirror and paste on the bottom left

Select Element 101 - resize by 60%

Paste and position on the right side

Select Element 110 - resize by 45%

Paste and position on the bottom right

Select Element 36 - resize by 40%

Paste and position on the bottom right

Select Element 9 - resize by 30%

Paste and position on the bottom right

Select Element 20 - resize by 40%

Paste and position on the bottom right

Select Element 88 - resize by 40%

Paste and position on the bottom right

Select Element 33 - resize by 30%

Paste and position on the top where desired

Select Element 89 - resize by 20%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 34 - resize by 15%

Paste and position on the bottom left

Select Element 63 - resize by 35%

Paste and position on the bottom left

Select Element 92 - resize by 30%

Paste and position on the bottom left

Select Element 49 - resize by 25%

Paste and position on the bottom left

Select Element 120 - resize by 20%

Paste and position on the bottom left

Select Element 67 - resize by 15%

Paste and position on the bottom left

Select Element 95 - resize by 15%

Paste and paste on the bottom

Select Element 83 - resize by 40%

Paste and position on the bottom

Select Element 13 - resize by 20%

Paste and position on the bottom

Select Element 28 - resize by 15%

Paste and position on the bottom

Select Element 85 - resize by 25%

Paste and position on the bottom

Select Element 119 - resize by 20%

Paste and position on the bottom

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 10, 2015

EVA'S HALLOWEEN



Supplies needed:

I am using the stunning artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Eva's Halloween" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 10, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Mask 3 Element - resize by 65%

Paste and position in the center of the canvas

Select Element 7 - resize by 45%

Paste and position on the top left

Select Element 8 - resize by 55%

Paste and position on the canvas and off center it to the left a bit

Select Element 4 - resize by 40

Paste and position on the top left below house element

Select Element 17 - resize by 25%

Paste and position on the top left

Select Element 21 - resize by 12%

Image Free Rotate Right by 15% and paste on the bottom right

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 14

Select invert, delete, select none

Move paper below frame layer

Select Element 115 - resize by 25%

Paste and position on the right side

Select Element 88 - resize by 45%

Paste and position on the bottom

Select Element 23 - resize by 15%

Paste and position on the right side

Select Element 32 - resize by 20%

Paste and position on the bottom right

Select Element 33 - resize by 20%

Paste and position on the left side behide witch element

Select Element 6 - resize by 20%

Paste and position on the bottom right

Select Element 11 - resize by 15%

Paste and position on the bottom right

Select Element 16 - resize by 20%

Paste and position on the bottom right

Select Element 85 - resize by 25%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 84 - resize by 25%

Paste and position on the left side

Select Element 107 - resize by 12%

Paste and position on the bottom left

Select Element 89 - resize by 20%

Paste and position on the bottom left

Select Element 42 - resize by 18%

Paste and position on the bottom left

Select Element 5 - resize by 40%

Paste and position on the top where desired

Select Element 18 - resize by 20%

Paste and position on the top right

Select Element 14 - resize by 20%

Paste and paste on the right side

Select Element 58 - resize by 15%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, October 6, 2015

TOUCH OF MAGIC



Supplies needed:

I am using the stunning artwork from Alfadesire for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "A Touch of Magic" which you can get by going here

Mask 7 from Rieka Rafita which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 6, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 14

Select invert, delete, select none

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Frame Element 6 - resize by 40%

Paste and position on the top right

Select your magic wand tool and select the center of each square (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete

Paste tube(s) of choice where desired and delete

Select none

Change close-up(s) to Luminance (Legacy), Overlay and Screen

Merge down on paper layer

Effect, Texture Effects, Blinds (Width 2, Opacity 20, Horizontal and Light from left/top checked)

Move below frame layer

Select FeltBat Element - resize by 25%

Paste and position on the top left

Select FairyCharm Element - resize by 40%

Paste and position on the top left

Select Moth Element - resize by 20%

Paste and position on the top right

Select Lamps Element - resize by 60%

Paste and position on the bottom above the paper layer

Select GroundLeaves Element - resize by 75%

Paste and position on the bottom above frame element

Select BranchwLeaves Element - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Candle Element - resize by 30%

Paste and position on the bottom right

Select Flower 2 Element - resize by 15%

Paste and position on the bottom right

Select Broach Element - resize by 25%

Image Free Rotate Left by 15% and on the bottom right

Select BottlewMagic Element - resize by 20%

Paste and position on the bottom right

Select Book Element - resize by 20%

Paste and position on the bottom

Select Glass Element - resize by 25%

Paste and position on the bottom

Select Ghostie2 Element - resize by 30%

Paste and position on the right side

Select Clock Element - resize by 20%

Paste and paste on the bottom left

Select Mushrooms 1 Element - resize by 25%

Paste and position on the bottom left

Select Flower 3 Element - resize by 15%

Paste and position on the bottom left

Select Spider Element - resize by 15%

Paste and position on the bottom

Select Mask Element - resize by 75%

Paste and position on the canvas and move to the bototm layer

Add new raster layer and flood-fill with gradient or color of choice

Apply Mask 7 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, October 5, 2015

PUMPKIN CARVER


Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kizzed by Kelz called "Carrie Carver" which you can get by going here

Mask 36 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 5, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 115 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 24

Select invert, delete, select none

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Element 1 - resize by 85%

Paste and position on the canvas where desired

Select Element 31- resize by 30%

Paste and position on the top right

Select Element 121 - resize by 55%

Paste and position on the right side

Select Element 24 - resize by 50%

Paste and position on the right side

Select Element 17 - resize by 40%

Paste and position on the top left

Select Element 52 - resize by 25%

Image Free Rotate Left by 15% and paste on the left side

Select Element 10 - resize by 45%

Paste and position on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 117 - resize by 15%

Paste and position on the bottom left

Select Element 38 - resize by 30%

Paste and position on the bottom left

Select Element 86 - resize by 30%

Paste and position on the bottom left

Select Element 55 - resize by 40%

Paste and position on the bottom right

Select Element 9 - resize by 25%

Paste and position on the bottom right

Select Element 107 - resize by 40%

Paste and position on the bottom right

Select Element 14 - resize by 22%

Paste and paste on the bottom right

Select Element 112 - resize by 12%

Paste and position on the bottom right

Paste paper 25 on canvas

Apply Mask 36 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 3, 2015

MONSTER HUNTER



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Monster Hunter" which you can get by going here

Mask 16 from Splitzd which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 3, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 65%

Paste and position in the center of the canvas

Select Frame Element - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Change close-up tube to Screen and drop opacity down to 85%

Apply drop shadow and merge down on paper layer

Move paper layer below window frame layer

Select Moon Element - resize by 40%

Paste and position on the top left

Select Tree 3 - resize by 40%

Paste and position on the left side

Select WA Element - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Bat 3 Element - resize by 35%

Paste and position on the top left

Select Torch Element - resize by 65%

Paste and position on the right side

Select Bottle 2 Element - resize by 30%

Paste and position on the bottom right

Select Locket Element - resize by 30%

Paste and position on the bottom right

Select Candles 2 Element - resize by 30%

Paste and position on the bottom

Select Pumpkin Element - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Rose 3 Element - resize by 20%

Paste and position on the bottom right

Select Bottle Element - resize by 25%

Paste and position on the bottom right

Select Button 2 Element - resize by 65%

Paste and position on the bottom

Select Vase Element - resize by 25%

Paste and position on the bottom

Select Gun Element - resize by 25%

Paste and position on the bottom

Select Monster 2 Element - resize by 40%

Paste and position on the bottom left

Select Bear 2 Element - resize by 30%

Paste and paste on the bottom left

Select Bottle 4 Element - resize by 30%

Paste and position on the bottom left

Select Flair 2 Element - resize by 40%

Paste and position on the bottom left

Select Skull 4 Element - resize by 30%

Paste and position on the bottom

Select Cat Element - resize by 40%

Paste and position on the bottom

Paste paper 10 on canvas

Apply Mask 16 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif