I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Sunday, October 30, 2016

OH MUMMY



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Oh Mummy" which you can get by going here

DmMask 104 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 30, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 54 - resize by 65%

Paste and position on towards the top of the canvas

Select Element 29 - resize by 40%

Paste and position on the bottom left

Select Element 26 - resize by 30%

Paste and position on the bottom right

Select Element 2 - resize by 45%

Paste and position on the left side

Select Element 108 - resize by 25%

Paste and position on the bottom left

Select Element 22 - resize by 30%

Paste and position on the right side

Select Element 53 - resize by 65%

Paste and position on the left side where desired

Select Element 20 - resize by 30%

Paste and position in the center where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 63 - resize by 40%

Paste and position on the right side

Select Element 5 - resize by 40%

Paste and position on the right side

Select Element 27 - resize by 25%

Paste and position on the top right below the fan element

Select Element 56 - resize by 75%

Paste and position on the bottom right

Select Element 89 - resize by 30%

Paste and paste on the bottom right

Select Element 107 - resize by 20%

Paste and position on the bottom right

Select Element 92 - resize by 30%

Paste and position on the bottom right

Select Element 72 - resize by 25%

Paste and position on the right side

Select Element 60 - resize by 25%

Paste and position in the center where desired

Select Element 30 - resize by 25%

Paste and position on the bottom

Select Element 76 - resize by 15%

Paste and position on the bottom

Select Element 19 - resize by 20%

Paste and position on the top left

Select Element 42 - resize by 75%

Paste and position on the top and move to the bottom layer

Paste paper 12 on canvas

Apply Mask 104 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 29, 2016

BOOLIGANS



Supplies needed:

I am using the stunning artwork from Molly Harrison for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Kissing Kate called "Booligans" which you can get by going here

Halloween Mask 4 from Toxic Desirez which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 29, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Select Element 30 - resize by 55%

Paste and position on the left side

Select Element 32 - resize by 30%

Paste and position on the top left

Select Element 13 - resize by 50%

Paste and position on the left side

Select Element 4 - resize by 20%

Paste and position on the top right

Select Element 19 - resize by 30%

Paste and position on the top right

Select Element 40 - resize by 30%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 38 - resize by 15%

Paste and position on the top right

Select Element 8 - resize by 20%

Image Free Rotate Right by 15% and paste on the top right

Select Element 2 - resize by 25%

Paste and position on the bottom right

Select Element 6 - resize by 15%

Paste and position on the right side

Select Element 35 - resize by 20%

Paste and paste on the bottom right

Select Element 43 - resize by 22%

Paste and position on the bottom right

Select Element 9 - resize by 20%

Paste and position on the bottom left

Select Element 44 - resize by 20%

Paste and position on the bottom left

Select Element 45 - resize by 20%

Image mirror and paste on the bottom left

Select Element 17 - resize by 30%

Paste and position on the bottom

Select Element 51 - resize by 50%

Paste and position on the bottom

Select Element 49 - resize by 40%

Paste and position on the bottom left and move to the botto layer

Image duplicate, mirror and flip

Paste paper 7 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, October 28, 2016

WICKED DIABLA



Supplies needed:

I am using the stunning artwork from Lysisange or this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Diabla" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 28, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 16 - paste and position in the center of the canvas

Select Element 41 - resize by 55%

Image mirror and paste in the center of the canvas

Select Frame Element 1 - resize by 65%

Paste and position in the center of the canvas

Select Element 56 - resize by 25%

Paste and position on the right side of the frame

Image duplicate and mirror

Select Element 54 - resize by 80%

Paste and position on the right side below the frame

Select Element 76 - resize by 20%

Paste and position on the bottom right

Select Element 86 - resize by 25%

Paste and position on the bottom right

Select Element 40 - resize by 30%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 39 - resize by 30%

Paste and position on the bottom right

Select Element 88 - resize by 25%

Paste and position on the bottom right

Select Element 30 - resize by 20%

Paste and position on the bottom

Select Element 71 - resize by 30%

Paste and position on the bottom

Select Element 48 - resize by 30%

Paste and paste on the bottom

Select Element 4 - resize by 25%

Paste and position on the bottom

Select Element 73 - resize by 20%

Image Free Rotate Left by 5% and paste on the bottom left

Select Element 65 - resize by 40%

Paste and position on the bottom left

Select Element 78 - resize by 20%

Paste and position on the bottom left

Select Element 72 - resize by 45%

Image mirror and paste on the bottom left

Select Element 82 - resize by 25%

Paste and position on the bottom left

Select Element 70 - resize by 40%

Paste and position on the bottom

Select Element 87 - resize by 30%

Paste and position on the bottom left

Select Element 62 - resize by 20%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, October 26, 2016

WITCHY INES



Supplies needed:

I am using the stunning artwork from Alehandra Vanhek or this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "Ines" which you can get by going here

Halloween Mask 4 from Toxic Desirez which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 26, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 20 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper layer below frame layer

Select Element 3 - resize by 75%

Paste and position on the top of the frame

Select Element 51 - resize by 75%

Paste and position on the top right side

Select Element 27 - resize by 65%

Paste and position on the left side

Select Element 48 - resize by 40%

Paste and position on the top left

Select Element 50 - resize by 45%

Paste and position on the bottom right

Select Element 23 - resize by 75%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 26 - resize by 20%

Paste and position on the bottom right

Select Element 12 - resize by 30%

Paste and position on the bottom right below tube layer

Select Element 46 - resize by 22%

Paste and position on the bottom left

Select Element 28 - resize by 15%

Paste and position on the bottom left

Select Element 1 - resize by 15%

Paste and paste on the bottom left

Select Element 53 - resize by 20%

Paste and position on the bottom left

Select Element 40 - resize by 25%

Paste and position on the bottom

Select Element 52 - resize by 15%

Paste and position on the bottom

Select Element 9 - resize by 35%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with gradient or color of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, October 23, 2016

PUMPKIN BABE



Supplies needed:

I am using the stunning artwork from Fiodorova Maria or this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Pumpkin Babe" which you can get by going here

Mask 21 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 23, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 87 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper layer below frame layer

Select Element 100 - resize by 20%

Paste and position on the top left

Select Element 29 - resize by 35%

Paste and position on the left side

Select Element 113 - resize by 65%

Paste and position on the right side

Select Element 20 - resize by 30%

Image mirror and paste and position on the right side

Select Element 34 - resize by 20%

Paste and position on the right side

Select Element 35 - resize by 20%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 104 - resize by 8%

Paste and position on the bottom right

Select Element 94 - resize by 25%

Paste and position on the bottom right

Select Element 37 - resize by 15%

Paste and position on the bottom right

Select Element 31 - resize by 20%

Paste and position on the bottom right

Select Element 39 - resize by 40%

Paste and paste on the bottom left

Select Element 47 - resize by 15%

Paste and position on the left side

Select Element 90 - resize by 20%

Paste and position on the bottom left

Select Element 45 - resize by 20%

Paste and position on the bottom left

Select Element 65 - resize by 20%

Paste and position on the bottom

Select Element 40 - resize by 25%

Image Free Rotate by 15% and paste on the bottom below the tube layer

Select Element 2 - resize by 22%

Paste and position on the bottom

Select Element 41 - resize by 30%

Paste and position on the bottom

Select Element 54 - resize by 6%

Paste and position on the bottom

Select Element 19 - resize by 15%

Image Free Rotate Left by 15% and paste and position on the top left

Paste paper 8 on canvas

Apply Mask 21 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 22, 2016

DIABLA



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designs by Joan called "Diabla" which you can get by going here

Mask 32 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 22, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 10 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper layer below frame layer

Select Element 62 - resize by 40%

Paste and position on the right side

Select Element 65 - resize by 30%

Paste and position on the top right

Select Element 64 - resize by 40%

Paste and position on the bottom right

Select Element 56 - resize by 40%

Paste and position on the bottom

Select Element 51 - resize by 25%

Paste and position on the bottom

Select Element 42 - resize by 25%

Paste and position on the bottom

Select Element 76 - resize by 20%

Paste and position on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 15 - resize by 30%

Paste and position on the bottom right

Select Element 38 - resize by 25%

Paste and position on the bottom right

Select Element 55 - resize by 25%

Paste and position on the bottom right

Select Element 52 - resize by 20%

Paste and position on the bottom right

Select Element 53 - resize by 20%

Paste and paste on the bottom left

Select Element 44 - resize by 25%

Paste and position on the bottom left

Select Element 72 - resize by 25%

Paste and position on the bottom

Select Element 5 - resize by 30%

Paste and position on the bottom left

Select Element 73 - resize by 25%

Image Free Rotate Right by 15% and paste on the right side

Paste paper 4 on canvas

Apply Mask 32 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, October 19, 2016

GOTH DEMON



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "The Goth Demon" which you can get by going here

Mask 209 from Simone which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 19, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 40

Paste and position in the center of the canvas

Select Element 6 - resize by 75%

Paste and position on the right side below the gate element

Select Element 8

Paste and position on the bottom

Select Element 42 - resize by 30%

Paste and position on the bottom

Select Element 28

Paste and position on the bottom below gate element

Select Element 48 - resize by 30%

Paste and position on the top where desired

Select Element 35 - resize by 25%

Paste and position on the top right

Select Element 33 - resize by 50%

Paste and position on the bottom left

Select Element 24 - resize by 25%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 15 - resize by 40%

Paste and position on the bottom right

Select Element 47 - resize by 20%

Paste and position on the bottom right

Select Element 46 - resize by 15%

Paste and position on the bottom right

Select Element 14 - resize by 20%

Paste and position on the bottom right

Select Element 26 - resize by 30%

Paste and paste on the bottom right

Select Element 34 - resize by 25%

Paste and position on the bottom

Select Element 13 - resize by 30%

Paste and position on the bottom left

Select Element 1 - resize by 20%

Paste and position on the bottom left

Select Element 12 - resize by 45%

Paste and position on the bottom right

Paste paper 7 on canvas

Apply Mask 209 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, October 16, 2016

FORBIDDEN EVIL



Supplies needed:

I am using the stunning artwork from Ismael Rac for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Forbiden Evil" which you can get by going here

Mask 206 from Simone which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 16, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 84 - resize by 40%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper layer below frame layer

Select Element 25 - resize by 45%

Paste and position on the top right

Select Element 34 - resize by 45%

Paste and position on the left side

Select Element 1 - resize by 20%

Paste and position on the left side

Select Element 104 - resize by 40%

Image Free Rotate Left by 15% and paste on the top left

Select Element 22 - resize by 20%

Paste and position on the right side

Select Element 5 - resize by 55%

Paste and position on the bottom

Select Element 42 - resize by 25%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 68 - resize by 20%

Paste and position on the bottom right

Select Element 98 - resize by 35%

Paste and position on the bottom right

Select Element 12 - resize by 15%

Paste and position on the bottom right

Select Element 101 - resize by 25%

Paste and position on the bottom left

Select Element 31 - resize by 30%

Paste and paste on the bottom left

Select Element 113 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 9 - resize by 30%

Paste and position on the bottom left

Select Element 3 - resize by 30%

Paste and position on the bottom left

Select Element 72 - resize by 20%

Paste and position on the bottom

Select Element 85 - resize by 10%

Paste and position on the bottom

Select Element 62 - resize by 15%

Paste and position on the bottom

Select Element 39 - resize by 15%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 100 - resize by 15%

Paste and position in the center where desired

Paste paper 5 on canvas

Apply Mask 206 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 15, 2016

PUMPKINS AND POTIONS



Supplies needed:

I am using the stunning artwork from Vadis for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Pumpkins and Potions" which you can get by going here

Halloween Mask 4 from Toxic Desirez which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 15, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 43 - resize by 65%

Paste and position in the center of the canvas

Select your selection wand tool and select the center of the frame (Rectangle (Add Shift), Feather 0, Anti-alias checked)

Paste paper 3

Select invert, delete, select none

Move paper layer below window element layer

Select Element 44 - resize by 25%

Paste and position on the top left

Select Element 72 - resize by 20%

Paste and position in the center of the window frame where desired

Select Element 25 - resize by 35%

Paste and position on the top left

Select Element 64 - resize by 30%

Paste and position on top left

Select Element 10 - resize by 20%

Paste and position on the top left

Select Element 74 - resize by 15%

Paste and position on the top right

Select Element 58 - resize by 25%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 57 - resize by 30%

Paste and position on the bottom left

Select Element 8 - resize by 15%

Paste and position on the bottom left

Select Element 11 - resize by 40%

Paste and position on the bottom left

Select Element 53 - resize by 20%

Paste and position on the bottom left

Select Element 40 - resize by 20%

Paste and paste on the bottom

Select Element 51 - resize by 250%

Paste and position on the bottom

Select Element 50 - resize by 20%

Paste and position on the bottom

Select Element 39 - resize by 15%

Paste and position on the bottom

Select Element 75 - resize by 25%

Paste and position on the bottom right below tube layer

Select Element 52 - resize by 20%

Paste and position on the bottom right

Select Element 79 - resize by 20%

Paste and position on the bottom right

Select Element 30 - resize by 15%

Paste and position on the bottom below tube layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, October 14, 2016

GOTHIC DE LA MUERTA



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Blissful Designs called "Gothic Skull" which you can get by going here

DmMask 104 from which you can find here

Plugins: Lokas 3D Shadow, Penta - Jeans
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 14, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 30 -

Paste and position on the bottom of the canvas

Select Element 19 - Paste and position in the center where desired

Select Element 46 - resize by 55%

Paste and position on the right side

Select Element 22 - resize by 75%

Paste and position on the right side

Select Element 48 - resize by 55%

Paste and position on the left side

Select Element 8 - resize by 30%

Paste and position in the center above cross element

Select Element 27 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 35 - resize by 30%

Paste and position on the bottom left

Select Element 40 - resize by 25%

Paste and position on the bottom left

Select Element 67 - resize by 40%

Paste and position on the bottom right

Select Element 41 - resize by 40%

Paste and position on the bottom right

Select Element 63 - resize by 15%

Paste and paste on the bottom right

Select Element 72 - resize by 30%

Paste and position on the bottom

Select Element 36 - resize by 30%

Paste and position on the bottom

Select Element 61 - resize by 30%

Paste and position on the bottom

Select Element 43 - resize by 30%

Paste and position on the bottom

Select Element 71 - resize by 20%

Paste and position on the bottom

Select Element 4 - resize by 20%

Paste and position on the bottom

Select Element 79 - resize by 20%

Paste and position on the bottom

Select Element 7 - resize by 25%

Paste and position on the bottom

Select Element 2 - resize by 20%

Paste and position on the right side

Paste paper 2 on canvas

Apply Mask 104 or mask of choice

Merge group and move to the bottom layer

Resize by 95%

Apply Penta - Jeans on default settings

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, October 9, 2016

SAUCY YING



Supplies needed:

I am using the stunning artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kizzed by Kelz called "Ying" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 9, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 97

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 75

Paste paper 10

Select invert, delete, select none

Move paper layer below frame layer

Select Element 51 - resize by 65%

Paste and position on the top of the paper layer

Select Element 39 - resize by 75%

Paste and position on the right side

Select Element 45 - resize by 75%

Paste and position on the top of the frame

Select Element 118 - resize by 55%

Image mirror and paste on the top right

Select Element 60 - resize by 30%

Paste and position on the bottom right

Image, duplicate, mirror and flip

Select Element 8 - resize by 50%

Paste and position on the bottom left

Select Element 62 - resize by 30%

Paste and position on the bottom left

Select Element 41 - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 66 - resize by 55%

Paste and position on the bottom left

Select Element 54 - resize by 15%

Paste and position on the bottom left

Select Element 23 - resize by 20%

Paste and position on the bottom left

Select Element 28 - resize by 15%

Paste and position on the bottom left

Select Element 121 - resize by 25%

Paste and paste on the bottom right

Select Element 71 - resize by 30%

Paste and position on the bottom right

Select Element 127 - resize by 15%

Paste and position on the bottom right

Select Element 103 - resize by 15%

Paste and position on the bottom

Select Element 75 - resize by 25%

Paste and position on the bottom

Select Element 35 - resize by 20%

Paste and position on the bottom

Select Element 11 - resize by 20%

Paste and position on the bottom

Select Element 46 - resize by 25%

Paste and position on the bottom

Select Element 67 - resize by 25%

Paste and position on the bottom

Select Element 56 - resize by 20%

Paste and position on the bottom

Select Element 69 - resize by 20%

Paste and position on the top right

Select Element 4 - resize by 35%

Paste and position on the canvas where desired

Paste paper 2 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

AUTUMN PICKLES



Supplies needed:

I am using the stunning artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Sossy" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 9, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 110 - resize by 52%

Paste and position in the center of the canvas

Select Frame Element 85 - resize by 55%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Element 87 - resize by 20%

Paste and position on the top left above paper layer

Select Element 56 - resize by 25%

Image Free Rotate Left by 15% and paste on the top where desired

Select Element 23 - resize by 40%

Paste and position on the bottom left

Select Element 101 - resize by 30%

Paste and position on the top left

Select Element 12 - resize by 15%

Image Free Rotate left by 15% and paste on the top left

Select Element 37 - resize by 22%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 47 - resize by 25%

Paste and position on the bottom right

Select Element 6 - resize by 10%

Paste and position on the bottom right

Select Element 48 - resize by 25%

Paste and position on the bottom

Select Element 4 - resize by 25%

Paste and paste on the bottom

Select Element 5 - resize by 20%

Paste and position on the bottom

Select Element 22 - resize by 10%

Paste and position on the bottom

Select Element 15 - resize by 8%

Paste and position on the bottom

Select Element 7 - resize by 15%

Paste and position on the bottom left

Select Element 96 - resize by 20%

Image mirror and paste on the bottom left

Select Element 9 - resize by 15%

Paste and position on the bottom left

Select Element 107 - resize by 20%

Paste and position on the bottom left

Select Element 42 - resize by 15%

Paste and position on the left side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, October 2, 2016

PUMPKIN HARVEST


Supplies needed:

I am using the amazing artwork from Natalia NZ for this tutorial which is part of the Halloween Pumpkin Harvest Collab that you can find here

Scrapkit: I am using a stunning kit from Mariel's Designs from the same Collab called "Halloween Pumpkin Harvest" which you can get by going here

Template 2 from BettyCreationz which you can find here

Halloween Mask 6 from Toxic Desirez which you can find here

Plugins used: Penta - Jeans, Eyecandy 4000 - Gradient Glow, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 2, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Rectangle Raster 15 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change tubes to Luminence - Legacy

Apply Xero Radiance at default settings or random setting of choice

Drop opacity down on tubes to 80%

Apply dropshadow and merge close-ups down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Delete/Hide original rectangle layer

Select Rectangle Raster 13 and repeat above steps

Select Rectangle Raster 1 layer

Select all, float, defloat

Paste Element 31 on top

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Oval Raster 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient color of choice

Select none

Delete/Hide original oval layer

Select Rectangle Raster 8 layer

Select all, fload, defloat

Add new raster layer and flood-fill with gradient color of choice

Select none

Apply Effects, Texture Effects, Texture with the following Hatch Lump Texture:

Select Rectangles Raster 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta Jeans with the following settings:

Select Rectangle Raster 10 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/hide rectangle raster 10

Select Element 20 - resize by 40%

Paste and position on the top of the paper layer where desired

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 30%

Paste and position on the top left

Select Element 1 - resize by 40%

Paste and position on left side

Select Element 26 - resize by 25%

Paste and position on left side

Select Element 5 - resize by 25%

Paste and position on bottom left

Select Element 28 - resize by 20%

Paste and position on bottom left

Select Element 38 - resize by 30%

Paste and position on bottom

Select Element 77 - resize by 20%

Paset and position on bottom left

Select Element 67 - resize by 25%

Paste and position on bottom

Select Element 81 - resize by 15%

Paste and position on bottom

Select Element 40 - resize by 20%

Paste and position on right side

Select Element 27 - resize by 25%

Paste and position on right side

Select Element 14 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 18 - resize by 22%

Image mirror and paste on the bottom right

Select Element 70 - resize by 20%

Paste and position on the bottom right

Select Element 83 - resize by 25%

Paste and position on the bottom below tube layer

Select Element 78 - resize by 22%

Paste and position on the bottom

Select Element 84 - resize by 65%

Paste and position on the canvas where desired

Select Bat Raster 17 Element

Apply Eyecandy Gradient Glow on fat default settings

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 6 or mask of choice

Merge group and move to the bottom layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, October 1, 2016

BOOTIFUL NIGHTMARE



Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "BootiFall" which you can get by going here

Halloween Mask 7 from Toxic Desirez which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 1, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 65%

Paste and position in the center of the canvas

Move frame up about 1 inch from the top

Select your magic wand tool and select the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper layer below frame layer

Select Ivy Element - resize by 30%

Image Free Rotate Left by 10% and paste on the top right above frame

Image duplicate, mirror and flip

Reposition ivy where desired on bottom left

Select House Element - resize by 55%

Paste and position on the right side of the frame

Select Lamp Element - resize by 30%

Paste and position on the right side

Select Grass Element - resize by 30%

Paste and position on the bottom right

Select Flower 6 Element - resize by 20%

Paste and position on the bottom right

Select Bottle 3 Element - resize by 30%

Paste and position on the bottom right

Select Skulls Element - resize by 25%

Paste and position on the bottom right below grass element

Select Book Element - resize by 25%

Paste and position on the bottom right

Select Bottle Element - resize by 30%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Sparkles 3 Element - resize by 75%

Paste and position on the canvas where desired

Select Pumpkin Element - resize by 30%

Paste and position on the bottom

Select Balloon Element - resize by 30%

Paste and position on the canvas where desired

Select Ghost Element - resize by 25%

Paste and position on the top right

Select Gem2 Element - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom

Select Cat Element - resize by 25%

Paste and position on the bottom

Select Sparkles Element - resize by 40%

Paste and position on the top left

Select Butterfly 2 Element - resize by 30%

Paste and position on the top left

Select Mushrooms Element - resize by 20%

Paste and position on the bottom left

Select Gem Element - resize by 65%

Paste and position on the bottom left

Select Candle Element - resize by 30%

Paste and position on the bottom left

Select Chest Element - resize by 25%

Paste and position on the bottom left

Select Flower Element - resize by 30%

Paste and position on the bottom below tube layer

Select Element 20 - resize by 15%

Add new raster layer and flood-fill with color of choice

Apply Mask 7 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif