Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Tuesday, December 25, 2018

Christmas Wishes



Supplies needed:

I am using the stunning artwork from Natalia NZ for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Christmas Wish" which you can get by going here

Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 24, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Select Background Element - resize by 55%

Paste and postion above paper layer

Chage the BG to Luminance (Legacy) and drop opacity down to 75%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Frame 3 Element - resize by 75%

Paste and position in the center above frame layer

Select Greenery Element - resize by 40%

Paste and position on the top left

Select Tree 2 Element - resize by 65%

Paste and position on the right side

Select List Element - resize by 40%

Paste and position on the bottom right

Select Berries 2 Element - resize by 50%

Image Free Rotate left by 15% and paste on the bottom

Select CL2 Element - resize by 30%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Sack Element - resize by 40%

Paste and position on the bottom below tube layer

Select Box Element - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom left

Select Deco 2 Element - resize by 40%

Paste and position on the bottom left below tube layer

Select Flake 2 Element - resize by 30%

Paste and position on the bottom right

Select Ball 4 Element - resize by 40%

Paste and paste on the bottom right

Select Bell Element - resize by 40%

Paste and position on the bottom right

Select Choco Element - resize by 40%

Paste and position on the bottom right

Select Snow 2 Element - resize by 50%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with color of choice

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, December 10, 2018

YOUNG PENGUIN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Young Penguin" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on Decemer 10, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Tagbg Element - resize by 65%

Paste and position in the center of the canvas

Select Frame Element 3 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Luminance (Legacy) and drop opacity down to 65%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Deco Element - resize by 55%

Paste and position on the bottom

Select House Element - resize by 65%

Paste and position on the right side

Select Stars 2 Element - resize by 40%

Paste and position on the top where desired

Select Mittens Element - resize by 40%

Paste and position on the top left

Select your eraser tool and erase the middle portion (optional)

Select Bow 2 Element - resize by 30%

Image Free Rotate Left by 15% and paste on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Penguin Element - resize by 40%

Paste and position on the bottom right

Select Clock Element - resize by 40%

Paste and position on the bottom

Select Pine Element - resize by 35%

Image Free Rotate Left by 15% and paste on the bottom left

Select Light Element - resize by 40%

Paste and position on the bottom left

Select Gift Element - resize by 40%

Paste and paste on the bottom left

Select Bird Element - resize by 30%

Paste and position on the bottom left

Select Box Element - resize by 30%

Paste and position on the bottom

Select Leaf Element - resize by 25%

Paste and position on the bottom

Select Cup Element - resize by 25%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, November 18, 2018

XMAS CARNIVAL




Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Xmas Carnival" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 18, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 9 - resize by 60%

paste and position in the center of the canvas

Select Frame Element 19 - resize by 55%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Element 87 - resize by 35%

Paste and position in the center of the canvas above frame layer

Select Element 24 - resize by 40%

Paste and position in the center above frame layer

Select Element 52 - resize by 50%

Paste and position on the left side

Select Element 47 - resize by 12%

Paste and position on the tree element

Select Element 23 - resize by 20%

Image Free Rotate Left by 15% and paste on the top left

Select Element 50 - resize by 12%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 30%

Paste and position on the bottom right below tube layer

Select Element 109 - resize by 15%

Paste and position on the bottom right

Select Element 8 - resize by 30%

Paste and position on the bottom right

Select Element 79 - resize by 15%

Paste and position on the bottom right

Select Element 34 - resize by 20%

Paste and paste on the bottom left

Select Element 72 - resize by 15%

Paste and position on the bottom left

Select Element 56 - resize by 25%

Paste and position on the bottom left

Select Element 111 - resize by 20%

Paste and position on the bottom left

Select Element 62 - resize by 12%

Paste and position on the bottom

Select Element 69 - resize by 10%

Paste and position on the bottom

Select Element 14 - resize by 20%

Paste and position on the bottom

Select Element 118 - resize by 10%

Paste and position on the bottom

Select Element 82 - resize by 12%

Paste and position on the bottom

Select Element 32 - resize by 12%

Paste and position on the bottom

Select Element 31 - resize by 6%

Paste and position on the bottom

Select Element 21 - resize by 15%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

CHRISTMAS BELLES




Supplies needed:

Scrapkit: I am using a stunning kit from Chili's Designz called "Christas Belle" which you can get by going here

Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 18, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete, select none

Move paper layer below frame layer

Select Border Element - resize by 64%

Paste and position on the top of the frame

Select Bow 2 Element - resize by 40%

Mirror image and paste on the top left

Select House 2 Element - resize by 55%

Paste and position in the center of the frame

Select Tree 2 Element - resize by 55%

Paste and position on right side

Select Reindeer Element - resize by 30%

Paste and position on the house element

Select Lights Element - resize by 25%

Paste and position on the house element

Select ElfNZ Element - resize by 65%

Paste and position on the right side where desired

Apply Lokas 3D Shadow at default settings

Select Candles Element - resize by 30%

Paste and position on the bottom left

Select Bucket Element - resize by 40%

Paste and position on the bottom left

Select Ball 3 Element - resize by 30%

Paste and position on the bottom left

Select Belles 2 Element - resize by 55%

Paste and position on the bottom

Select Candy Element - resize by 55%

Paste and paste on the bottom

Select Flower 2 Element - resize by 20%

Paste and position on the bottom

Select Globe Element - resize by 30%

Paste and position on the bottom

Select Santa Element - resize by 30%

Paste and position on the bottom right

Select Snow2 Element - resize by 55%

Paste and position in the center of the canvas

Paste paper 4 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 6, 2018

CAT DANCER



Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from CSDesigns called "Cat Dancer 2" which you can get by going here

Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 6, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change the closeup to Luminance (Legacy)

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 52 - resize by 75%

Paste and position above paper layer

Select Element 6 - resize by 90%

Paste and position in the center above the frame layer

Select Element 33 - resize by 25%

Paste and position on the right side

Select Element 36 - resize by 20%

Paste and position on the bottom right

Select Element 57 - resize by 22%

Paste and position on the bottom right

Select Element 43 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 23 - resize by 20%

Paste and position on the bottom

Select Element 38 - resize by 40%

Paste and position on the bottom right

Select Element 14 - resize by 20%

Paste and position on the bottom

Select Element 45 - resize by 30%

Paste and position on the bottom left

Select Element 58 - resize by 25%

Paste and paste on the bottom left

Select Element 28 - resize by 20%

Paste and position on the bottom left

Select Element 41 - resize by 25%

Paste and position on the bottom

Paste paper 10 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

MEAN QUEEN



Supplies needed:

I am using the stunning artwork from Josephine Sha for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Maleficent" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 6, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Element 111 - resize by 45%

Paste and position on the top left of the canvas

Select Element 132 - resize by 55%

Paste and position in the center of the canvas

Select Element 25 - resize by 40%

Paste and position on the top left below element 132

Select Element 122 - resize by 50%

Paste and position on the top right

Select Element 31 - resize by 40%

Paste and position on the left side

Select Element 117 - resize by 50%

Paste and position on the bottom left

Select Element 76 - resize by 30%

Paste and position on the bottom left

Select Element 28 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 134 - resize by 25%

Paste and position on the bottom left

Select Element 128 - resize by 25%

Paste and position on the bottom left

Select Element 105 - resize by 30%

Paste and position on the bottom left

Select Element 171 - resize by 50%

Paste and position on the bottom left

Select Element 22 - resize by 20%

Paste and paste on the bottom

Select Element 29 - resize by 40%

Paste and position on the bottom

Select Element 160 - resize by 30%

Paste and position on the bottom

Select Element 154 - resize by 20%

Paste and position on the top left

Select Element 140 - resize by 65%

Paste and position on the left side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, April 16, 2018

CUTE PUNK



Supplies needed:

I am using the stunning artwork from Josephine Sha for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Cute Punk" which you can get by going here

Mask 1 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow, Cybia - Screenworks, Eyecandy 4000 Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 16, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 56 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Apply Cybia, Screenworks Chainlink on the following settings:

Move paper layer below frame layer

Select Element 58 - resize by 75%

Paste and position on top in the center of the canvas

Select Element 41 - resize by 80%

Paste and position on the top left

Select Element 24 - resize by 25%

Image Free Rotate Left by 15% and paste on the top left

Select Element 35 - resize by 55%

Paste and position on the right side

Select Element 20 - resize by 30%

Paste and position on the bottom right

Select Element 9 - resize by 25%

Paste and position on the bottom left

Select Element 11 - resize by 25%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 15%

Paste and position on the bottom left

Select Element 27 - resize by 25%

Paste and position on the bottom left

Select Element 10 - resize by 25%

Paste and position on the bottom right

Select Element 60 - resize by 20%

Paste and position on the bottom

Select Element 61 - resize by 65%

Paste and paste on the bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element - resize by 15%

Paste and position on the bottom left

Select Element 12 - resize by 20%

Paste and position on the bottom left

Select Element 65 - resize by 30%

Paste and position on the right side

Paste paper 1 on the canvas

Apply Mask 180 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, April 15, 2018

BEBA LATINA



Supplies needed:

I am using the stunning artwork from Janah Irinya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called " Beba Latina" which you can get by going here

Mask 180 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 62 -

Paste and position in the center of the canvas

Select Frame Element 76 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each rectangle in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Hard Light and drop opacity down to 75%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 66 - resize by 80%

Paste and position on the bottom

Select Element 68 - resize by 30%

Paste and position in the center of the frame

Select Element 67 - resize by 30%

Paste and position on the top right

Select Element 48 - resize by 25%

Paste and position on the top right

Select Element 61 - resize by 30%

Paste and position on the bottom left

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element 9 - resize by 30%

Paste and position on the bottom left

Select Element 39 - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 40%

Paste and position on the bottom right

Select Element 2 - resize by 20%

Paste and position on the bottom right

Select Element 32 - resize by 25%

Paste and position on the bottom

Select Element 27 - resize by 30%

Paste and position on the bottom

Select Element 23 - resize by 20%

Paste and paste on the bottom

Select Element 38 - resize by 15%

Paste and position on the bottom left

Select Element 12 - resize by 20%

Paste and position on the bottom left

Select Element 65 - resize by 30%

Paste and position on the right side

Paste paper 1 on the canvas

Apply Mask 180 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

MILLIE GIRL



Supplies needed:

I am using the stunning artwork from Juisy for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Millie" which you can find here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Tree Element - resize by 50%

Paste and position on the top left

Select Deco 4 Element - resize by 40%

Paste and position on the top of the frame

Select City Element - resize by 55%

Paste and position in the center where desired

Select Greenery Element - resize by 55%

Paste and position on the bottom right

Select Plate Element - resize by 20%

Paste and position on the bottom right

Select Rose 2 Element - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Film Element - resize by 40%

Paste and position on the bottom left

Select Wings Element - resize by 15%

Paste and position on the bottom left

Select Lipstick 2 Element - resize by 50%

Paste and position on the bottom left

Select Pillow Element - resize by 25%

Paste and position on the bottom

Select Pills Element - resize by 25%

Paste and paste on the bottom

Select Perfume 2 Element - resize by 30%

Paste and position on the bottom

Select Polish Element - resize by 30%

Paste and position on the bottom

Select Powder Element - resize by 40%

Paste and position on the bottom

Select Boa Element - resize by 30%

Paste and position on the bottom

Select Jewel 2 Element - resize by 40%

Paste and position on the bottom

Select leaves Element - resize by 30%

Paste and position on the bottom

Select Flower 2 Element - resize by 65%

Paste and position on the top right

Select Sparkles 2 Element - resize by 55%

Paste and position on the canvas where desired

Paste paper 6 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, April 1, 2018

BEAUTIFUL COLORS




Supplies needed:

I am using the stunning artwork from Juisy for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Free Colors" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 1, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Element 23 - resize by 90%

Paste and position in the center of the canvas

Select Element 25 -

Paste and position in the center of the canvas

Select Element 21 - resize by 65%

Paste and position in the center of the canvas

Select Element 44 - resize by 30%

Paste and position on the bottom left

Select Element 7 - resize by 30%

Paste and position on the top left

Select Element 11 - resize by 75%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 15%

Paste and position on the bottom right

Select Element 14 - resize by 15%

Paste and position on the bottom right below the tube layer

Select Element 35 - resize by 25%

Image Free Rotate Right by 15% and paste on the top left

Select Element 12 - resize by 15%

Paste and position in the center where desired

Select Element 27 - resize by 20%

Paste and paste on the bottom left

Select Element 8 - resize by 35%

Paste and position on the bottom left

Select Element 50 - resize by 20%

Paste and position on the bottom left

Select Element 17 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 19 - resize by 25%

Paste and position on the bottom

Select Element 2 - resize by 10%

Paste and position on the bottom

Select Element 20 - resize by 12%

Paste and position on the bottom

Select Element 36 - resize by 40%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, March 31, 2018

UMBRELLA BABE




Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Reineke Designs called "Umbrella Babe" which you can get by going here

Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 31, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Element 15 - paste and position in the center of the canvas

Select Frame Element 45 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Luminance (Legacy) and drop opacity down to 75%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 16 - resize by 25%

Image Free Rotate Left by 15% and paste on the top left

Select Element 4 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 10 - resize by 40%

Paste and position on the bottom right

Select Element 30 - resize by 40%

Paste and position on the bottom left

Select Element 23 - resize by 20%

Paste and position on the bottom left

Select Element 17 - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 30%

Paste and position on the bottom right

Select Element 21 - resize by 30%

Paste and position on the bottom right

Select Element 49 - resize by 30%

Paste and position on the bottom

Select Element 43 - resize by 40%

Paste and position on the bottom right

Select Element 14 - resize by 20%

Paste and paste on the bottom

Select Element 46 - resize by 20%

Paste and position on the bottom

Select Element 24 - resize by 15%

Paste and position on the bottom

Select Element 28 - resize by 50%

Paste and position on the canvas where desired

Paste paper 6 on the canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, February 11, 2018

RED HOT VALENTINE



Supplies needed:

I am using the stunning artwork from Josephine Sha for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Valentine" which you can get by going here

Mask from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 11, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Luminance (Legacy)

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Sparkles 3 Element -

Paste and position in the center of the canvas where desired

Select Butterfly Element - resize by 65%

Paste and position on the top left

Select Leaves Element - resize by 40%

Paste and position on the bottom

Select WA Element - resize by 55%

Image Free Rotate Left by 15% and paste on the top left

Select Branch Element - resize by 40%

Paste and position on the bottom right

Select Heart 2 Element - resize by 65%

Image Free Rotate Right by 15% and paste on the bottom right

Select Blocks Element - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Flower 3 Element - resize by 40%

Paste and position on the bottom left

Select Flower 2 Element - resize by 40%

Paste and position on the bottom left

Select Jar Element - resize by 40%

Paste and position on the bottom left

Select Cake 4 Element - resize by 50%

Paste and position on the bottom left

Select Choco Element - resize by 40%

Paste and position on the bottom left

Select Bird Element - resize by 40%

Paste and paste on the bottom

Select Choco 2 Element - resize by 40%

Paste and position on the bottom

Select Letter Element - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom

Select Rose 2 Element - resize by 30%

Paste and position on the bottom

Paste paper 2 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, February 4, 2018

BLACK ANGEL



Supplies needed:

I am using the stunning artwork from Janah Irinya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Black Angel" which you can get by going here

Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on February 4, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element - resize by 85%

Paste and position in the center of the canvas

Select your selection tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Greenery 2 Element - resize by 30%

Paste and position on the top left

Select Lamp 2 Element - resize by 50%

Paste and position on the bottom right

Select Wings Element - resize by 40%

Paste and position on the right side

Select Sparkles 2 Element -

Paste and position in the center where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Dog Element - resize by 30%

Paste and position on the bottom right

Select Lips Element - resize by 50%

Paste and position on the left side

Select Clock Element - resize by 40%

Paste and position on the bottom left

Select Pillow Element - resize by 40%

Image Free Rotate Right by 15% and paste on the bottom

Select Leaf Element - resize by 30%

Paste and position on the bottom left

Select Keys Element - resize by 30%

Paste and paste on the bottom

Select Lipstick Element - resize by 40%

Paste and position on the bottom

Select Perfume 2 Element - resize by 40%

Imae mirror and paste and position on the bottom

Select Button 2 Element - resize by 75%

Paste and position on the bottom

Select Flower 3 Element - resize by 25%

Paste and position on the bottom

Paste paper 1 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, January 28, 2018

LOVE ANGEL



 Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Tag Catz Designs called "Love Angel" which you can get by going here

Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 28, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 85%

Paste and position in the center of the canvas

Select your selection tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Element 20 - resize by 20%

Image Free Rotate Left by 15% and paste on the top left

Select Element 71 - resize by 30%

Image Free Rotate Left by 15% and paste on the left side

Select Element 53 - resize by 30%

Paste and position on the left side

Select Element 26 - resize by 40%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 47 - resize by 30%

Paste and position on the bottom right

Select Element 44 - resize by 25%

Paste and position on the bottom right

Select Element 19 - resize by 30%

Paste and position on the bottom left

Select Element 76 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 52 - resize by 25%

Paste and position on the bottom left

Select Element 8 - resize by 20%

Paste and paste on the bottom

Select Element 17 - resize by 30%

Paste and position on the bottom

Select Element 22 - resize by 20%

Paste and position on the bottom

Select Element 2 - resize by 25%

Paste and position on the bottom

Select Element 6 - resize by 30%

Paste and position on the bottom

Select Element 75 - resize by 30%

Paste and position on the bottom

Select Element 77 - resize by 65%

Paste and position on the canvas where desired

Paste paper 5 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

OWL KINGDOM



Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Owl Kingdom" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 28, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete, select none

Move paper layer below frame layer

Select Frame Element 5 - resize by 75%

Paste and position in the center of the canvas

Select Net Element - resize by 85%

Paste and position on the left side

Select Tree Element - resize by 55%

Paste and position on the left side

Select Castle 2 Element - resize by 55%

Paste and position in the center where desired

Select Owl 4 Element - resize by 30%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Carriage Element - resize by 45%

Paste and position on the bottom right

Select Flower 5 Element - resize by 20%

Paste and position on the bottom left

Select Grass Element - resize by 40%

Paste and position on the bottom left

Select Statue Element - resize by 30%

Paste and position on the bottom left

Select Deco 5 Element - resize by 40%

Paste and position on the bottom left

Select Flower 6 Element - resize by 40%

Paste and paste on the bottom

Select Deco 4 Element - resize by 40%

Paste and position on the bottom

Select Box Element - resize by 30%

Paste and position on the bottom

Select Pillow Element - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom

Select Shoe 2 Element - resize by 40%

Paste and position on the bottom

Select Pearls Element - resize by 20%

Paste and position on the bottom

Select Tiara 2 Element - resize by 30%

Paste and position on the bottom

Select Broche2 Element - resize by 30%

Paste and position on the bottom right

Paste paper 11 on the canvas

Apply Mask 32 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, January 21, 2018

STEAM CUPID



Supplies needed:

I am using the stunning artwork from Mariel for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel Designs called "Steam Cupidon" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 21, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 7 -

Paste and position in the center of the canvas

Select Frame Element 2 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete, select none

Move paper layer below frame layer

Select Element 79 - resize by 65%

Paste and position on top of the paper layer where desired

Select Element 94 - resize by 30%

Paste and position on the top left

Select Element 89 - resize by 40%

Paste and position on the top right

Select Element 91 - resize by 55%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 24 - resize by 45%

Paste and position on the bottom right

Select Element 33 - resize by 30%

Paste and position on the bottom right

Select Element 31 - resize by 15%

Paste and position on the bottom right

Select Element 83 - resize by 15%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 17 - resize by 20%

Paste and position on the bottom right

Select Element 83 - resize by 15%

Paste and position on the bottom right

Select Element 69 - resize by 15%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 53 - resize by 12%

Paste and position on the bottom left

Select Element 32 - resize by 20%

Paste and paste on the bottom

Select Element 46 - resize by 25%

Paste and position on the bottom

Select Element 42 - resize by 20%

Paste and position on the bottom

Select Element 48 - resize by 20%

Paste and position on the bottom

Select Element 92 - resize by 15%

Paste and position on the bottom

Select Element 81 - resize by 15%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BEAUTY OF THE NIGHT



Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Beauty of the Night" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 21, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper layer below frame layer

Select Element 3 - resize by 80%

Paste and position on the right side

Select Element 17 - resize by 65%

Paste and position on the top left

Select Element 67 - resize by 30%

Paste and position on the top center

Select Element 6 - resize by 85%

Paste and position in the center where desired

Select Element 75 - resize by 40%

Paste and position on the bottom right

Select Element 104 - resize by 75%

Paste and position on the bottom left

Select Element 80 - resize by 25%

Paste and position on the bottom left

Select Element 83 - resize by 15%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 28 - resize by 15%

Paste and position on the bottom right

Select Element 78 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right below tube layer

Select Element 105 - resize by 20%

Paste and position on the bottom right

Select Element 37 - resize by 30%

Paste and position on the bottom below the tube layer

Select Element 19 - resize by 30%

Paste and paste on the bottom

Select Element 87 - resize by 15%

Paste and position on the bottom

Select Element 73 - resize by 15%

Paste and position on the bottom

Select Element 95 - resize by 25%

Paste and position on the right

Paste paper 2 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, January 7, 2018

LITTLE BLACK DRESS



Supplies needed:

I am using the stunning artwork from Janah Irinya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Jenn's Designs called "Black Dress which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 7, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 47 -

Paste and position in the center of the canvas

Select Element 23

Paste and position in the center of the canvas

Select Frame Element 79 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste close-up tube of choice

Select invert, delete, select none

Chage the closeup to Luminance (Legacy) and drop opacity down to 75%

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move below frame layer

Select Element 4 -

Paste and position on the top left

Select Element 40 - resize by 50%

Paste and position on the top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 44 - resize by 40%

Paste and position on the bottom

Select Element 65 - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 35 - resize by 45%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 28 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 60 - resize by 15%

Paste and position on the bottom right

Select Element 17 - resize by 25%

Paste and position on the bottom

Select Element 6 - resize by 30%

Paste and position on the bottom

Select Element 49 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 2 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 53 - resize by 20%

Paste and position on the bottom

Select Element 80 - resize by 20%

Paste and position on the bottom

Select Element 78 - resize by 50%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, January 6, 2018

GOLD NEW YEAR



Supplies needed:

I am using the stunning artwork from Mariel for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel's Designs called "New Year in Gold" which you can get by going here

Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 6, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Move paper layer below frame layer

Select Element 114 - resize by 50%

Paste and position on the top left

Select Element 31 - resize by 40%

Paste and position on the top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 5 - resize by 25%

Paste and position on the top where desired

Select Element 61 - resize by 60%

Paste and position on the left side

Select Element 67 - resize by 60%

Paste and position on the bottom of city element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 20%

Paste and position on the bottom left

Select Element 16 - resize by 20%

Paste and position on the bottom left

Select Element 21 - resize by 25%

Paste and position on the bottom

Select Element 25 - resize by 15%

Paste and position on the bottom

Select Element 39 - resize by 20%

Paste and position on the bottom left

Select Element 14 - resize by 20%

Paste and paste on the bottom

Select Element 2 - resize by 20%

Paste and position on the bottom

Select Element 46 - resize by 15%

Paste and position on the bottom

Select Element 3 - resize by 12%

Paste and position on the bottom

Select Element 10 - resize by 15%

Paste and position on the bottom

Select Element 115 - resize by 75%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with color of choice

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, January 1, 2018

CHRISTMAS EVA



Supplies needed:

I am using the stunning artwork from Toriya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Xmas Eva" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 1, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 90 - resize by 75%

Paste and position in the center of the canvas

Select Frame Element 34 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete, select none

Move paper layer below frame layer

Select Element 46 - resize by 50%

Paste and position on the right side

Select Element 9 - resize by 20%

Paste and position on the right side above tree element

Select Element 23 - resize by 50%

Paste and position on the top

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 25 - resize by 25%

Paste and position on the right side

Select Element 88 - resize by 30%

Paste and position on the top where desired

Select Element 95 -

Paste and position on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 81 - resize by 30%

Paste and position on the bottom left below tube layer

Select Element 36 - resize by 12%

Paste and position on the bottom right

Select Element 10 - resize by 22%

Paste and position on the bottom right

Select Element 85 - resize by 15%

Paste and position on the bottom right

Select Element 4 - resize by 20%

Paste and position on the bottom

Select Element 26 - resize by 15%

Paste and paste on the bottom

Select Element 16 - resize by 20%

Paste and position on the bottom

Select Element 8 - resize by 15%

Paste and position on the bottom

Select Element 49 - resize by 22%

Paste and position on the bottom

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif