Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Wednesday, December 30, 2015

REINDEER DRESS



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Reindeer Dress" which you can get by going here

Winter Mask 12 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 30, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 80 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity down to 72%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 13 - resize by 40%

Paste and position on top of the frame

Select Element 34 - resize by 65%

Paste and position on the left side

Select Element 54 - resize by 20%

Paste and position on the top right

Image duplicate and resize by 80%

Position on the right side where desired and repeat step

Select Element 55 - resize by 40%

Paste and position on the bottom right

Select Element 21 - resize by 40%

Paste and position on the bottom right

Select Element 73 - resize by 20%

Paste and position on the bottom right

Select Element 19 - resize by 40%

Paste and position on the bottom right

Select Element 15 - resize by 20%

Paste and position on the bottom right

Select Element 17 - resize by 20%

Paste and position on the bottom right

Select Element 36 - resize by 20%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 74 - resize by 15%

Paste and position on the bottom left

Select Element 33 - resize by 20%

Paste and position on the bottom left

Select Element 30 - resize by 25%

Paste and position on the bottom left

Select Element 67 - resize by 30%

Paste and position on the bottom left

Select Element 75 - resize by 25%

Paste and position on the bottom

Select Element 56 - resize by 15%

Paste and paste on the bottom

Select Element 72 - resize by 18%

Paste and position on the bottom

Select Element 48 - resize by 20%

Paste and position on the bottom

Select Element 76 - resize by 25%

Paste and position on the bottom

Select Element 41 - paste and position on canvas where desired

Paste paper 3 on canvas

Apply Mask 12 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, December 23, 2015

SANTA BABY



Supplies needed:

I am using the stunning artwork from KiwiBG for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kizzed by Kelz called "Xmas" which you can get by going here

Winter Mask 12 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 23, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 145 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 47

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity down to 72%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 56 - resize by 30%

Paste and position on top right about frame

Image duplicate and mirror

Select Element 9 - resize by 80%

Paste and position on the top of the frame

Select Element 34 - resize by 80%

Paste and position on the top

Select Element 28 - resize by 75%

Paste and position on the right side

Select Element 70 - resize by 30%

Paste and position on the bottom right

Select Element 150 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 73 - resize by 30%

Paste and position on the bottom right

Select Element 18 - resize by 30%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 139 - resize by 20%

Paste and position on the bottom left

Select Element 61 - resize by 30%

Paste and position on the bottom left

Select Element 3 - resize by 20%

Paste and position on the bottom left

Select Element 114 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 24 - resize by 40%

Paste and position on the bottom left

Select Element 89 - resize by 15%

Paste and paste on the bottom left

Select Element 38 - resize by 30%

Paste and position on the bottom below the tube layer

Select Element 136 - resize by 20%

Paste and position on the bottom below the tube

Select Element 77 - resize by 20%

Paste and position on the bottom

Select Element 95 - resize by 30%

Paste and position on the bottom

Select Element 4 - resize by 25%

Paste and position on the bottom

Select Element 31 - resize by 25%

Paste and position on the bottom right

Select Element 40 - resize by 20%

Paste and position on the bottom

Paste paper 5 on canvas

Apply Mask 12 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, December 20, 2015

MAMELUKE



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Mameluke" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 20, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete

Paste close-up tube of choice on top of paper and delete

Select none

Change close-up to Luminenance (Legacy) and drop opacity down to 62%

Apply dropshadow and merge down on top of paper layer

Move paper layer below frame layer

Select Wreath Element - resize by 65%

Paste and position on top of the frame where desired

Select Moon 3 Element - resize by 20%

Paste and position on the top of the frame where desired

Select Stars Element- resize by 25%

Paste and position on the top left

Select Deco Element - resize by 25%

Paste and position on the left side

Select Clouds Element - resize by 30%

Image mirror and paste on the top right

Select Greenery 5 Element - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Box 4 Element - resize by 40%

Paste and position on the bottom right below tube layer

Select Flower 5 Element - resize by 25%

Paste and position on the bottom right below tube layer

Select Heart Element - Image Free Rotate Left by 15%

Paste and position on the bottom where desired

Select Teddy Element - resize by 40%

Paste and position on the bottom

Select Box Element - resize by 35%

Paste and position on the bottom

Select Pillow 6 Element - resize by 25%

Paste and paste on the bottom left

Select Perfume Element - resize by 30%

Paste and position on the bottom left

Select Slippers Element - resize by 40%

Paste and position on the bottom left

Select Flower3 Element - resize by 25%

Paste and position on the bottom

Paste paper 4 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 19, 2015

PRESENTS FOR SANTA



Supplies needed:

I am using the stunning artwork from Verymany for this tutorial which you can find here

Scrapkit: I am using a gorgeous FTU kit from Pink Paradox Productions called "Present for Santa" which you can get by going here

Winter Mask 7 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 19, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 52 - resize by 50%

Paste and position in the center of the canvas

Select Frame Element 7 - resize by 40%

Image Free Rotate Left by 15% and past on the top left below house element

Select Element 56 - resize by 35%

Image Free Rotate Left by 15% and paste on the top where desired

Select Element 76 - resize by 50%

Paste and position on the right side below house element

Select Element 2 - resize by 20%

Image Free Rotate Right by 15% and paste on the top right

Select Element 65 - resize by 20%

Paste and position on the right side of the house

Select Element 31 - resize by 25%

Paste and position on bottom right

Select Element 34 - resize by 15%

Paste and position on the bottom right

Select Element 36 - resize by 15%

Paste and position on the right side

Select Element 8 - resize by 20%

Paste and position on the bottom right

Select Element 13 - resize by 15%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 24 - resize by 15%

Paste and position on the bottom right

Select Element 21 - resize by 20%

Paste and position on the bottom

Select Element 29 - resize by 10%

Paste and position on the bottom

Select Element 11 - resize by 15%

Paste and position on the bottom

Select Element 12 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 61 - resize by 15%

Image mirror and paste on the bottom

Select Element 3 - resize by 30%

Image mirror and paste on the bottom left

Select Element 36 - resize by 15%

Paste and position on the bottom left

Select Element 30 - resize by 25%

Paste and position on the bottom left

Select Element 9 - resize by 20%

Paste and position on the bottom left

Select Element 22 - resize by 30%

Paste and position on the bottom left

Select Element 71 - resize by 20%

Paste and position on the left below the violin elment

Select Element 6 - resize by 18%

Paste and position on the top of the house element where desired

Select Element 19 - resize by 20%

Paste and position on the house element where desired

Paste paper 6 on canvas - I colorize it pink with the following settings:

Apply Mask 7 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ANEIRA'S SNOW



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Kizzed by Kelz called "Aneira" which you can get by going here

Winter Mask 10 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 19, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 48 -paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Paste paper 13

Select invert, delete

Paste close-up tube of choice on top of paper and delete

Select none

Change close-up to Luminence (Legacy) and drop opacity down to 50%

Apply dropshadow and merge down on top of paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 96 - resize by 30%

Paste and position on top left

Select Element 57 - resize by 20%

Paste and position on the top right

Select Element 109 - resize by 25%

Paste and position on the left side

Select Element 111 - resize by 30%

Paste and position on the bottom right

Select Element 75 - resize by 25%

Paste and position on the bottom right

Select Element 121 - resize by 20%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 83 - resize by 30%

Paste and position on the bottom

Select Element 91 - resize by 30%

Paste and position on the bottom

Select Element 1 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 22 - resize by 20%

Paste and position on the bottom

Select Element 71 - resize by 30%

Paste and paste on the bottom left

Select Element 128 - resize by 20%

Image mirror and paste on the bottom left

Select Element 115 - resize by 40%

Paste and position on the bottom left

Select Element 6 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 73 - resize by 22%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 68 - resize by 25%

Paste and position on the bottom

Select Element 14 - resize by 30%

Paste and position on the bottom

Paste paper 5 on canvas

Apply Mask 10 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, December 13, 2015

GOLDEN HOLIDAY



Supplies needed:

I am using the stunning artwork from Trinita for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Foxy's Designz called "Golden Holidays" which you can get by going here

Winter Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 13, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to darken and drop opacity down to 50%

Apply dropshadow and merge down on paper layer

Move paper layer below frame layer

Select Element 2 - resize by 25%

Paste and position on in the center of the canvas

Apply Mura Meister Copies with the following settings:

Select Element 17 - resize by 25%

Paste and position on the top center

Select Element 29 - resize by 30%

Paste and position on the top left

Select Element 32 - resize by 22%

Paste and position on the bottom left

Select Element 37 - resize by 22%

Paste and position on the bottom left

Select Element 6 - resize by 20%

Paste and position on bottom left

Select Element 27 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 25%

Paste and position on the bottom

Select Element 24 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 1 - resize by 40%

Paste and position on the bottom below tube layer

Select Element 8 - resize by 15%

Paste and position on the bottom

Select Element 30 - resize by 25%

Paste and position on the bottom left

Paste paper 6 on canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 12, 2015

FLOATING ON AIR



Supplies needed:

I am using the stunning artwork from Enamorte for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "Floating on Air" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 12, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Window Cluster Element - resize by 55%

Paste and position in the center of the canvas

Select Leave Frame Element - resize by 82%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste Bonus Deco Page Paper on top

Select invert, delete, select none

Move paper layer to the bottom layer

Select FlowerGateway Element - resize by 65%

Paste and position on top in the center of the canvas

Select Flower Buds Element - resize by 40%

Paste and position on the right side

Select Balloons Element - resize by 40%

Image mirror and paste on the top right

Select Butterfly Element - resize by 30%

Paste and position on the right side

Select Light Show - resize by 40%

Paste and position on the bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Cluster Clock Element - resize by 22%

Image Free Rotate Right by 15% and paste on the bottom right

Select BottleAlt Element - resize by 25%

Paste and position on the bottom right

Select Envelope Element - resize by 30%

Paste and position on the bottom

Select Cluster Flower Element- resize by 25%

Paste and position on the bottom

Select Rose Alt Element - resize by 20%

Paste and paste on the bottom left

Select Lantern Alt Element - resize by 25%

Paste and position on the bottom left

Select Locket Element - resize by 22%

Image Free Rotate Right by 15% and paste on the bottom

Select Sparkles Element - resize by 75%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BLUE CHRISTMAS



Supplies needed:

I am using the stunning artwork from Chris Pastel for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Blue Christmas" which you can get by going here

Winter Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow, Eyecandy Gradient Glow (optional)
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 12, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 62 - resize by 55%

Paste and position in the center of the canvas

Select your magic wand tool and select the top and center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete, select none

Move paper layer below frame layer

Select Element 34 - resize by 80%

Paste and position on top of the frame where desired

Select Element 91 - resize by 40%

Paste and position on the left side

Select Element 48 - resize by 20%

Image mirror and paste on the top right

Select Element 43 - resize by 15%

Paste and position on the top left

Select Element 17 - resize by 25%

Paste and position on the top where desired

Apply Eyecandy Gradient Glow if desired on fat default settings (Glow width 3)

Select Element 114 - resize by 30%

Paste and position on top of the frame where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 14 - resize by 18%

Paste and position on the bottom left

Select Element 110 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 106 - resize by 35%

Paste and position on the bottom left

Select Element 26 - resize by 15%

Paste and position on the bottom left

Select Element 79 - resize by 22%

Paste and position on the bottom right

Select Element 112 - resize by 40%

Paste and paste on the bottom right

Select Element 37 - resize by 20%

Paste and position on the bottom right

Select Element 102 - resize by 15%

Paste and position on the right side below bear element

Select Element 8 - resize by 45%

Paste and position on the bottom

Select Element 42 - resize by 25%

Paste and position on the bottom

Select Element 40 - resize by 18%

Paste and position on the bottom

Select Element 1 - resize by 25%

Paste and position on the right side where desired

Paste paper 2 on canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, December 7, 2015

HOME FOR THE HOLIDAYS



Supplies needed:

I am using the stunning artwork from Misticheskaya for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Kissing Kate called "Home for Christmas" which you can get by going here

Winter Mask 10 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 6, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Frame Element 3 - resize by 70%

Paste and position on top of frame 5 where desired

Select Element 6 - resize by 15%

Paste and position on the top left side

Duplicate 3 times and position around the frame where desired

Select Element 19 - resize by 25%

Image Free Rotate Right by 15% and paste on the top left

Select Element 39 - resize by 25%

Paste and position on the right where desired

Select Element 48 - resize by 50%

Paste and position on the top where desired

Select Element 18 - resize by 30%

Paste and position on the right side

Select Element 9 - resize by 25%

Paste and position on the left side (I added gradient glow on fat default)

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 37 - resize by 18%

Paste and position on the left side

Select Element 25 - resize by 20%

Paste and position on the bottom left

Select Element 23 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 8 - resize by 30%

Paste and position on the bottom left

Select Element 34 - resize by 20%

Paste and position on the bottom left

Select Element 36 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 17 - resize by 30%

Paste and position on the bottom

Select Element 4 - resize by 20%

Paste and paste on the bottom

Select Element 44 - resize by 20%

Paste and position on the bottom right

Select Element 45 - resize by 25%

Paste and position on the bottom right

Select Element 24 - resize by 25%

Paste and position on the bottom right

Paste paper 9 on canvas

Apply Mask 10 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif