Labels

I CT For

photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Friday, October 30, 2020

SCHOLARLY WITCH

3:07 PM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Verymany for this tutorial which you can find here
 Scrapkit: I am using a stunning kit by Kizzed by Kelz called "Witch 17" which you can get by going here 
 Halloween Mask 17 from Fecnikek which you can find here 
 Plugins: Lokas 3D Shadow, Eyecandy Gradient Glow
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 30, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 

 Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later)  

Select Paper 1 and paste on the canvas 
 Apply Mask 17 and merge group 

 Select Element 149 - resize by 65% 
 Paste and position on the left side 

 Select Element 130 - resize by 55% 
 Paste and position on the right side

 Select Element 61 - resize by 40%
 Paste and position on the top right 

 Select Element 119 - resize by 40% 
 Paste and position on the right side

 Select Element 13 - resize by 25% 
 Paste and position on the left side 

 Select Element 7 - resize by 30% 
 Paste and position on the left side

 Select Element 128 - resize by 30% 
 Paste and position on the left side

 Select Element 150 - resize by 65% 
 Paste and position in the center 

 Select  Element 49 - resize by 30% 
 Paste and position in the center 

 Select Element 53 - resize by 35% 
 Paste and position on the left side

 Select Element 92 - resize by 30% 
 Paste and position on the top center 

 Select Element 121 - resize by 30%
 Paste and position on the top left 
 Apply Eyecandy Gradient Glow on fat default settings (glow width 3) 

 Paste tube of choice where desired Apply Lokas 3D Shadow at default settings

 Select Element 70 - resize by 20% 
 Image mirror and paste on the left side 

 Select Element 143 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 144 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 109 - resize by 55% 
 Paste and position on the bottom left 

 Select Element 129 - resize by 25% 
 Paste and paste on the bottom left 

 Select Element 106 - resize by 20% 
 Paste and position on the bottom 

 Select Element 14 - resize by 25%
 Paste and position on the bottom below tube layer

 Select Element 88 - resize by 20% 
 Paste and position on the bottom

 Select Element 134 - resize by 40% 
 Paste and position on the bottom below tube layer

 Select Element 151 - resize by 30%
 Paste and position on the bottom left 

 Select Element 29 - resize by 25% 
 Paste and position on the right side 

 Select Element 113 - resize by 30%
 Paste and position on the bottom right 

 Select Element 99 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 27 - resize by 25% 
 Paste and position on the bottom right 

 Select Element 91 - resize by 20% 

 Paste and position on the bottom right 
 Select Element 42 - resize by 40% 

 Paste and position on the top right
 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, October 25, 2020

HALLOWEEN EVE

10:02 AM | Posted by | Edit Post


These CT Tags were made using the amazing kit Halloween Eve by Chili's Designz. You can purchase the kit here

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.
Labels: | 0 comments
Thursday, October 22, 2020

PUMPKIN SPICE

5:07 PM | Posted by | Edit Post
Supplies needed: 
 I am using the gorgeous artwork from Arthur Crowe for this tutorial which you can find here 
Scrapkit: I am using a stunning kit by Happy Pumpkin Studios called "Pumpkin Spice" which you can get by going here and here
 Fall Mask 1 from Fecnikek which you can find here
 Plugins: Lokas 3D Shadow
 ----------------------------

 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 22, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. Ok - let's start and remember to save often. 

 Open up a 750 x 650 blank canvas (we can resize it later) 

Select Paper 25 and paste on the canvas 
 Apply Mask 1 and merge group 

 Select Paper 12 and paste on the canvas 
 Reapply same mask and merge group and change to overlay 

Select Element 96 - resize by 40% 
 Paste and position on the right side 

 Select Element 114 - resize by 40% 
 Paste and position on the top left

 Select Element 125 - resize by 12% 
 Paste and position on the top left

 Select Element 26 - resize by 40%
 Paste and position on the top right

 Select Element 90 - resize by 15% 
 Paste and position on the top right
 
Select Element 13 - resize by 20% 
 Paste and position on the top right 

 Select Element 60 - resize by 20% 
 Paste and position on the right side

 Select Element 97 - resize by 20% 
 Paste and position on the top right

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings

 Select Element 59 - resize by 15% 
Image Free Rotate Right by 15% and paste on the left side

 Select Element 67 - resize by 30% 
 Paste and position on the bottom left

 Select Element 46 - resize by 30% 
 Paste and position on the bottom left 

 Select Element 17 - resize by 15% 
 Paste and position on the bottom left 

 Select Element 112 - resize by 30% 
 Paste and paste on the right side

 Select Element 101 - resize by 20% 
 Paste and position on the left side 

 Select Element 20 - resize by 15% 
 Paste and position on the bottom right 

 Select Element 27 - resize by 20% 
 Paste and position on the bottom 

 Select Element 45 - resize by 15%
 Paste and position on the bottom

 Select Element 121 - resize by 15%
 Paste and position on the bottom

 Select Element 6 - resize by 15%
 Paste and position on the bottom

 Select Element 8 - resize by 40%
 Paste and position on the bottom

 Select Element 11 - resize by 10%
 Paste and position on the bottom 

 Select Element 41 - resize by 12% 
 Paste and position on the bottom 

 Select Element 52 - resize by 12% 
 Paste and position on the bottom 

 Select Element 71 - resize by 15%
 Paste and position on the bottom 

 Select Element 38 - resize by 30% 
 Paste and position on the bottom right

 Select Element 51 - resize by 12%
 Paste and position on the bottom right

 Select Element 62 - resize by 20%
 Paste and position on the bottom right

 Select Element 87 - resize by 10% 
 Paste and position on the bottom right

 Select Element 106 - resize by 50%
 Paste and position on the left side

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial! 
Labels: | 0 comments
Wednesday, October 21, 2020

DARK WINTER PRINCESS

5:45 PM | Posted by | Edit Post



These CT Tags were made using the amazing artwork by Ishika Chowdhury and matching kit by Wicked Diabla Designs. 
 You can purchase the tube Dark Winter Princess Here  
You can purchase the matching kit Dark Winter Princess Here

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.
Labels: | 0 comments

SEDUCTRESS VAMPIRE

2:10 PM | Posted by | Edit Post
Supplies needed:
 I am using the gorgeous artwork from Verymany for this tutorial which you can find here 
 Scrapkit: I am using a stunning kit by Kizzed by Kelz called "Vampire 8" which you can get by going here 
 Mask 71 from Vivienne which you can find here 
 Plugins: Lokas 3D Shadow 
---------------------------- 

 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 21, 2020. 
Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. 
Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 

 Open up a 750 x 650 blank canvas (we can resize it later)
 Select Paper 11 and paste on the canvas 
 Apply Mask 71 and merge group 

 Select Element 72 - resize by 75% 
 Paste and position on the top right 

 Select Element 143 - resize by 40% 
 Image mirror and paste on the left side

 Select Element 123 - resize by 30% 
 Paste and position on the top right 

 Select Element 55 - resize by 50% 
 Paste and position on the right side 

 Select Element 89 - resize by 40% 
 Paste and position on the left side 

 Select your magic wand tool and select the center of the mirror (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0) 
 Selections, Modify, Expand by 3 

 Paste close-up tube in the center 
 Select invert, delete, select none 
 Drop the opacity on the close-up tube to 60% 

 Select Element 71 - resize by 55% 
 Paste and paste on the top left 

 Select Element 138 - resize by 55%
 Paste and position on the top left 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

 Select Element 51 - resize by 30% 
 Paste and position on the left side 

 Select Element 127 - resize by 39%
 Paste and position on the b0ttom left 

 Select Element 44 - resize by 30% 
 Paste and position on the bottom left 

 Select Element 19 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 94 - resize by 20% 
 Paste and paste on the bottom left 

 Select Element 141 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 119 - resize by 15%
 Paste and position on the bottom left

 Select Element 104 - resize by 40% 
 Paste and position on the bottom 

 Select Element 62 - resize by 65% 
 Image mirror and paste on the bottom 

 Select Element 117 - resize by 25% 
 Paste and position on the bottom

 Select Element 150 - resize by 30% 
 Paste and position on the bottom

 Select Element 4 - resize by 25%
 Paste and position on the bottom

 Select Element 86 - resize by 25% 
 Paste and position on the bottom
 Select Element 49 - resize by 20% 

 Paste and position on the bottom 
 Select Element 74 - resize by 20%

 Image mirror and paste on the right side 
 Select Element 16 - resize by 30% 

 Image Free Rotate by 15% and paste on the bottom right  

Select Element 130 - resize by 40% 
 Paste and position on the bottom right 

 Select Element 3 - resize by 25% 
 Paste and position on the bottom right

 Select Element 64 - resize by 20% 
 Paste and position on the bottom right 

 Add any dropshadows you like 
 Sharpen any elements as needed
 Crop and resize as desired
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Tuesday, October 20, 2020

AMELIE DARK NIGHT

12:52 PM | Posted by | Edit Post

These CT Tags were made using the amazing artwork by Charmed Designs. You can purchase the kit "Amelie Dark Night" Here:


These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.
Labels: | 0 comments

SIREN AWAKENING

9:14 AM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Goldwasser for this tutorial which you can find here 
 Scrapkit: I am using a stunning kit by Curious Creative Dreams called "Siren Awakening" which you can get by going Here
 Mask 48 from Vivienne which you can find here 
 Plugins: Lokas 3D Shadow, Eyecandy Gradient Glow 
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 20, 2020. 
Please do not copy or paste on any other forum, website or blog provide link back to tut only.
 Please do not claim as your own. This tutorial is copyrighted to me. 
Any resemblance to any other tutorial is purely coincidental. Ok - let's start and remember to save often.
 Open up a 750 x 650 blank canvas (we can resize it later)  

Select Paper 4 and paste on the canvas 
 Apply Mask 48 and merge group

 Select Element 34 - 
 Paste and position on the top right 

 Select Element 61 - resize by 65% 
 Paste and position on the top left 

 Select Element 14 - resize by 85% 
 Paste and position on the top right 

 Select Element 58 - resize by 75% 
 Paste and position on the right side 

 Select Element 18 - resize by 85% 
 Paste and position on the left side 

 Select Element 59 - resize by 65% 
Image Free Rotate Right by 15% and paste on the left side

 Select Element 31 - resize by 65% 
 Paste and position on the top center 

 Select Element 42 - resize by 75% 
 Paste and position on the bottom

 Paste tube of choice where desired
 Apply Lokas 3D Shadow at default settings 

 Select Element 38 - resize by 40% 
 Paste and position on the bottom left

 Select Element 6 - resize by 50% 
 Image mirror and paste on the bottom left 

 Select Element 36 - resize by 30% 
 Paste and position on the bottom left 

 Select Element 37 - resize by 30% 
 Paste and position on the bottom left 

 Select Element 46 - resize by 50% 
 Paste and paste on the bottom left 

 Select Element 8 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 10 - resize by 30% 
 Paste and position on the top right 

 Select Element 41 - resize by 30% 
 Paste and position on the right side 

 Select Element 45 - resize by 30% 
 Paste and position on the right side 

 Select Element 26 - resize by 55% 
 Paste and position on the bottom right

 Select Element 62 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 57 - resize by 75% 
 Paste and position on the bottom right 

 Select Element 32 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 49 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 25 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 29 - resize by 30%
 Paste and position on the bottom right 

 Select Element 7 - resize by 30%
 Paste and position in the center 

 Select Element 19 - resize by 30% 
 Paste and position on the bottom 
 
Select Element 16 - resize by 30% 
 Paste and position on the bottom

 Select Element 43 - resize by 40% 
 Paste and position on the bottom

 Select Element 66 - resize by 65%
 Paste and position on the top center

 Apply Eyecandy Gradient Glow on fat default settings (Glow width 3) 

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, October 18, 2020

DRAGON WITCH

4:43 PM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Arthur Crowe for this tutorial which you can find here
 Scrapkit: I am using a stunning kit by Mariel Designs called "Dragon Witch" which you can get by going here
 Mask 943 from Rachel Designs which you can find here 
 Plugins: Lokas 3D Shadow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 18, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own.
 This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 

Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later)  

Select Paper 5 and paste on the canvas 
 Apply Mask 943 and merge group 

 Select Element 73 - resize by 85%
Paste and position in the center of the canvas

Select Element 76 - resize by 55% 
 Paste and position on the top left 
 
Select Element 44 - resize by 25% 
 Paste and position on the top left

 Select Element 8 - resize by 50% 
 Paste and position on the right side

 Select Element 70 - resize by 40% 
 Paste and position on the top left 
 
Select Element 27 - resize by 30% 
 Paste and position on the left side 

 Select Element 55 - resize by 55%
 Paste and position on the right side 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

Select Element 31 - resize by 25% 
 Paste and position on the left side

 Select Element 97 - resize by 30% 
 Paste and position on the left side 

 Select Element 86 - resize by 15%
 Image mirror and paste on the bottom left 

 Select Element 58 - resize by 40% 
 Paste and position on the bottom left 

 Select Element 66 - resize by 50% 
 Paste and paste on the bottom left below tube layer 

 Select Element 4 - resize by 20%
 Paste and position on the bottom left 

 Select Element 105 - resize by 20% 
 Paste and position on the bottom left

 Select Element 23 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 3 - resize by 20% 
 Paste and position on the right side 

 Select Element 38 - resize by 40%

 Paste and position on the bottom right 
 Select Element 75 - resize by 40% 

 Paste and position on the bottom right
 Select Element 78 - resize by 20% 

Paste and position on the bottom right 
 Select Element 65 - resize by 25% 

 Paste and position on the bottom right 
 Select Element 48 - resize by 20% 

 Paste and position on the bottom right 
 Select Element 50 - resize by 15% 

 Paste and position on the bottom right 
 Select Element 77 - resize by 15% 

 Paste and position on the bottom right 
 Add any dropshadows you like 
 Sharpen any elements as needed
 Crop and resize as desired
 Add copyright info, license number and name 
 You're done! Thanks for trying my tutorial!
Labels: | 0 comments

Her Wicked Ways

12:00 PM | Posted by | Edit Post

These CT Tags were made using a collaboration between Curious Creative Dreams And Elegancefly**. The Scrapkit Match Liana With the Magnificent Tube Liana by Jenny. You can purchase the tube at Elegancefly  Here. You can purchase the matching scrapkit here 
 **Note: The Tube is NOT included in the kit.

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.
Labels: | 0 comments
Saturday, October 17, 2020

KIRA

8:55 AM | Posted by | Edit Post

These CT Tags were made using the stunning artwork by Ishika Chowdhury.   You can purchase the stunning tube Here . 

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.
Labels: | 0 comments
Thursday, October 15, 2020

SCARY PUMPKIN

1:11 PM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Andy Cooper for this tutorial which you can find here
 Scrapkit: I am using a stunning kit by Chili's Designz called "Scary Pumpkin" which you can get by going here 
 Mask 2 from Fecnikek which you can find here 
 Plugins: Lokas 3D Shadow, Eyecandy Gradient Glow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 15, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 

 Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later) 

 Select Paper 4 and paste on the canvas
 Apply Mask 2 and merge group 

 Paste Paper 10 and reapply mask 2 
 Merge Group and change to Hard Light and drop opacity down to 65% 

 Select Tree Element - resize by 55%
 Paste and position on the top right 

 Select Deco Element - resize by 40% 
 Paste and position on the top left

 Select Bat Element - resize by 30% 
 Paste and position on the top left 

 Select Deco 2 Element - resize by 30%
 Paste and position on the top right

 Select Owl Element - resize by 30% 
 Paste and position on the top right 

 Select Branch 3 Element - resize by 30% 
 Image mirror and paste on the right side 

 Select WA Element - resize by 30% 
 Paste and position on the top right side 
 Apply Eyecandy Gradient Glow on fat default settings (Glow width 3) 

 Select Berries2 Element - resize by 30% 
 Paste and position on the left side 

 Select Flower Element - resize by 25% 
 Paste and position on the left side

 Select Wheel Element - resize by 30% 
 Paste and position on the left side 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

 Select Cauldron2 Element - resize by 40% 
 Paste and position on the left side 

 Select Light Element - resize by 25% 
 Paste and position on the left side 

 Select Flower 3 Element - resize by 25% 
 Paste and position on the bottom left 

 Select Books Element - resize by 30%
 Paste and position on the bottom left 

 Select Spider Element - resize by 25% 
 Paste and paste on the bottom left

 Select Leaves 2 Element - resize by 20%
 Paste and position on the bottom left 

 Select Eye Element - resize by 50% 
 Paste and position on the bottom left 

 Select Stub Element - resize by 40%
 Paste and position on the right side 

 Select Flower 2 Element - resize by 30% 
 Paste and position on the right side 

 Select Stockings Element - resize by 30% 
 Paste and position on the right side

 Select Pumpkin16 Element - resize by 30%
 Paste and position on the right side 

 Select Flowers Element - resize by 25% 
 Paste and position on the bottom right 

 Select Cat Element - resize by 30% 
 Paste and position on the bottom right 

 Select Potion 2 Element - resize by 20%
 Paste and position on the bottom right 

 Select Candle 2 Element - resize by 25%
 Paste and position on the bottom right

 Select Sparkles 3 - resize by 40%
 Paste and position on the left side 

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name 
 You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, October 11, 2020

HALLOWEEN WITCH 9

4:41 PM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Alex Prihodko for this tutorial which you can find here 
 Scrapkit: I am using a stunning kit by Kizzed by Kelz called "Halloween Witch 9" which you can get by going here 
 Mask 4 from Fecnikek which you can find here
 Pugins: Lokas 3D Shadow
 ---------------------------- 

 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 11, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. Ok - let's start and remember to save often. 

Open up a 750 x 650 blank canvas (we can resize it later) 
Select Paper 10 and paste on the canvas 
 Apply Mask 4 and merge group 

 Select Element 125 - resize by 25%
 Paste and position on the top left 

 Select Element 54 - resize by 50% 
 Paste and position on the top right 

 Select Element 88 - resize by 65% 
 Paste and position on the top right 

 Select Element 80 - resize by 40% 
 Paste and position on the top right 

 Select Element 61 - resize by 40% 
 Paste and position on the top left 

 Select Element 153 - resize by 55%
 Paste and position on the left side 

 Select Element 83 - resize by 30% 
 Paste and position on the right side 

 Select Element 5 - resize by 40%
 Paste and position on the right side

 Select Element 112 - resize by 30%
 Image mirror and paste on the left side 

 Select Element 87 - resize by 25% 
 Paste and position on the left side 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

 Select Element 45 - resize by 40%
 Paste and position on the bottom left below tube layer

 Select Element 76 - resize by 20%
 Paste and position on the b0ttom left 

 Select Element 71 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 102 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 69 - resize by 30% 
 Paste and paste on the bottom left 

 Select Element 64 - resize by 25% 
 Paste and position on the bottom left
 Select Element 58 - resize by 40% 

 Paste and position on the right side 
 Select Element 43 - resize by 55% 

 Paste and position on the bottom right
 Select Element 159 - resize by 55%

 Paste and position on the bottom right 
 Select Element 60 - resize by 30% 

 Paste and position on the bottom right 
 Select Element 13 - resize by 25%

 Paste and position on the bottom right 
 Select Element 124 - resize by 20%

 Paste and position on the bottom right 
 Select Element 6 - resize by 20% 

 Paste and position on the bottom right 
 Select Element 49 - resize by 30% 

 Paste and position on the bottom right 
 Select Element 1 - resize by 30%

 Paste and position on the bottom right 
 Select Element 2 - resize by 30% 

 Paste and position on the bottom right 
 Select Element 23 - resize by 30% 

 Paste and position on the bottom 
 Select Element 130 - resize by 50% 

 Paste and position on the bottom
 Select Element 106 - resize by 30% 

 Paste and position on the bottom 
 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name 
 You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Thursday, October 8, 2020

FRANKENSTEIN BRIDE

5:46 PM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Danny Lee for this tutorial which you can find here 
 Scrapkit: I am using a stunning kit by Mariel Designs called "Frankenstein Bride" which you can get by going here
 Mask 304 from Misteeques which you can find here 
 Plugins: Lokas 3D Shadow 
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 8, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. Ok - let's start and remember to save often. 

Open up a 750 x 650 blank canvas (we can resize it later)  
Select Paper 6 and paste on the canvas
 Apply Mask 304 and merge group

 Select Element 61 - resize by 55% 
 Paste and position on the top left 

 Select Element 88 - resize by 55% 
 Paste and position on the top left 

Select Element 8 - resize by 20% 
 Paste and position on the top right 

 Select Element 92 - resize by 25% 
 Paste and position on the top right 

 Select Element 12 - resize by 30%
 Paste and position on the right side 

 Select Element 10 - resize by 35% 
 Paste and position on the right side

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

 Select Element 30 - resize by 40% 
 Paste and position on the left side 

 Select Element 97 - resize by 25% 
 Paste and position on the b0ttom left

 Select Element 41 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 44 - resize by 25%
 Paste and position on the bottom left

 Select Element 36 - resize by 25% 
 Paste and paste on the bottom left

 Select Element 43 - resize by 30%
 Image mirror and paste on the bottom

 Select Element 65 - resize by 25%
 Paste and position on the bottom 

 Select Element 42 - resize by 40% 
 Paste and position on the bottom left 

 Select Element 20 - resize by 15% 
 Paste and position on the bottom left 

 Select Element 54 - resize by 20% 
 Paste and position on the bottom left

 Select Element 94 - resize by 30% 
 Paste and position on the bottom right

 Select Element 96 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 73 - resize by 25% 
 Image mirror and paste on the bottom right 

 Select Element 51 - resize by 15% 
 Paste and position on the bottom right 

 Select Element 40 - resize by 20% 
 Paste and position on the bottom right 

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name 
 You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Wednesday, October 7, 2020

LARVA SPELL

5:35 PM | Posted by | Edit Post

These CT Tags were made using a collaboration between Curious Creative Dreams And Elegancefly**. The Scrapkit Match Larva Spell With JuKirumy Magnificent Tube Larva. You can purchase the tube at Elegancefly Here . You can purchase the matching scrapkit here. 
 **Note: The Tube is NOT included in the kit.

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.
Labels: | 0 comments
Tuesday, October 6, 2020

Wicked Vampiress

7:24 AM | Posted by | Edit Post
Supplies needed: 
 I am using the gorgeous artwork from 
Alehandra Vanhek for this tutorial which you can find here 
 Scrapkit: I am using a stunning kit by Kizzed by Kelz called "Vamp" which you can get by going here 
 Mask 313 from Mizteeques which you can find here
 Plugins: Lokas 3D Shadow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on October 6, 2020.  Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. 
This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. Ok - let's start and remember to save often.

 Open up a 750 x 650 blank canvas (we can resize it later)
 Select Paper 11 and paste on the canvas

 Apply Mask 313 and merge group 
 Select Element 64 - resize by 30% 
 Adjust, Color and Saturatize with the following settings: 



 Select Element 54 - resize by 30% 
 Image mirror and paste on the top right 

 Select Element 126 - resize by 40%
Paste and position on the top right

 Select Element 133 - resize by 50% 
 Paste and position in the center 

 Select Element 58 - resize by 50% 
 Paste and position on the bottom right 

 Select Frame Element 30 - resize by 40%
 Paste and position on the top left 

 Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0) Selections, Modify, Expand by 5
 Paste paper 8 Select invert, delete 
 Paste close-up tube on paper layer and delete
 Select none Change close-up tube to and to Luminance (Legacy)
 Drop opacity down to 90% and merge down on paper layer 
 Move paper and close-up layer below frame element 
 Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)  
Paste tube of choice where desired
 Apply Lokas 3D Shadow at default settings 

 Select Element 95 - resize by 25% 
 Paste and position on the top left 

 Select Element 67 - resize by 30%
 Paste and position on the left side 

 Select Element 44 - resize by 40% 
 Paste and position on the left side 

 Select Element 137 - resize by 30%
 Paste and position on the bottom left

 Select Element 101 - resize by 25% 
 Paste and paste on the bottom left 

 Select Element 45 - resize by 30% 
 Paste and position on the bottom left 

 Select Element 78 - resize by 30% 
 Paste and position on the right side 

 Select Element 25 - resize by 40% 
 Paste and position on the right side 

 Select Element 17 - resize by 15%
 Paste and position on the bottom right 

 Select Element 140 - resize by 15%
 Paste and position on the bottom right 

 Select Element 153 - resize by 20%
 Paste and position on the bottom 

 Select Element 141 - resize by 15% 
 Paste and position on the bottom 

 Select Element 40 - resize by 15% 
 Paste and position on the bottom 

 Select Element 142 - resize by 25% 
 Paste and position on the bottom 

 Select Element 113 - resize by 15%
 Paste and position on the bottom 

 Select Element 2 - resize by 20% 
 Paste and position on the bottom 
 Select Element 130 - resize by 65% 

 Paste and position on the top right Add any dropshadows you like 
 Sharpen any elements as needed Crop and resize as desired
 Add copyright info, license number and name 
 You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Subscribe to: Posts (Atom)

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







photo milliespspmadness_zps1b81d2e9.gif