Lee's Creationz

Sunday, May 6, 2018

CAT DANCER

11:20 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from CSDesigns called "Cat Dancer 2" which you can get by going here

Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 6, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change the closeup to Luminance (Legacy)

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 52 - resize by 75%

Paste and position above paper layer

Select Element 6 - resize by 90%

Paste and position in the center above the frame layer

Select Element 33 - resize by 25%

Paste and position on the right side

Select Element 36 - resize by 20%

Paste and position on the bottom right

Select Element 57 - resize by 22%

Paste and position on the bottom right

Select Element 43 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 23 - resize by 20%

Paste and position on the bottom

Select Element 38 - resize by 40%

Paste and position on the bottom right

Select Element 14 - resize by 20%

Paste and position on the bottom

Select Element 45 - resize by 30%

Paste and position on the bottom left

Select Element 58 - resize by 25%

Paste and paste on the bottom left

Select Element 28 - resize by 20%

Paste and position on the bottom left

Select Element 41 - resize by 25%

Paste and position on the bottom

Paste paper 10 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

MEAN QUEEN

6:59 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Josephine Sha for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Maleficent" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 6, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Element 111 - resize by 45%

Paste and position on the top left of the canvas

Select Element 132 - resize by 55%

Paste and position in the center of the canvas

Select Element 25 - resize by 40%

Paste and position on the top left below element 132

Select Element 122 - resize by 50%

Paste and position on the top right

Select Element 31 - resize by 40%

Paste and position on the left side

Select Element 117 - resize by 50%

Paste and position on the bottom left

Select Element 76 - resize by 30%

Paste and position on the bottom left

Select Element 28 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 134 - resize by 25%

Paste and position on the bottom left

Select Element 128 - resize by 25%

Paste and position on the bottom left

Select Element 105 - resize by 30%

Paste and position on the bottom left

Select Element 171 - resize by 50%

Paste and position on the bottom left

Select Element 22 - resize by 20%

Paste and paste on the bottom

Select Element 29 - resize by 40%

Paste and position on the bottom

Select Element 160 - resize by 30%

Paste and position on the bottom

Select Element 154 - resize by 20%

Paste and position on the top left

Select Element 140 - resize by 65%

Paste and position on the left side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Monday, April 16, 2018

CUTE PUNK

5:45 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Josephine Sha for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Cute Punk" which you can get by going here

Mask 1 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow, Cybia - Screenworks, Eyecandy 4000 Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 16, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 56 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Apply Cybia, Screenworks Chainlink on the following settings:

Move paper layer below frame layer

Select Element 58 - resize by 75%

Paste and position on top in the center of the canvas

Select Element 41 - resize by 80%

Paste and position on the top left

Select Element 24 - resize by 25%

Image Free Rotate Left by 15% and paste on the top left

Select Element 35 - resize by 55%

Paste and position on the right side

Select Element 20 - resize by 30%

Paste and position on the bottom right

Select Element 9 - resize by 25%

Paste and position on the bottom left

Select Element 11 - resize by 25%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 15%

Paste and position on the bottom left

Select Element 27 - resize by 25%

Paste and position on the bottom left

Select Element 10 - resize by 25%

Paste and position on the bottom right

Select Element 60 - resize by 20%

Paste and position on the bottom

Select Element 61 - resize by 65%

Paste and paste on the bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element - resize by 15%

Paste and position on the bottom left

Select Element 12 - resize by 20%

Paste and position on the bottom left

Select Element 65 - resize by 30%

Paste and position on the right side

Paste paper 1 on the canvas

Apply Mask 180 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Sunday, April 15, 2018

BEBA LATINA

2:20 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Janah Irinya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called " Beba Latina" which you can get by going here

Mask 180 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 62 -

Paste and position in the center of the canvas

Select Frame Element 76 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each rectangle in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Hard Light and drop opacity down to 75%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 66 - resize by 80%

Paste and position on the bottom

Select Element 68 - resize by 30%

Paste and position in the center of the frame

Select Element 67 - resize by 30%

Paste and position on the top right

Select Element 48 - resize by 25%

Paste and position on the top right

Select Element 61 - resize by 30%

Paste and position on the bottom left

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element 9 - resize by 30%

Paste and position on the bottom left

Select Element 39 - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 40%

Paste and position on the bottom right

Select Element 2 - resize by 20%

Paste and position on the bottom right

Select Element 32 - resize by 25%

Paste and position on the bottom

Select Element 27 - resize by 30%

Paste and position on the bottom

Select Element 23 - resize by 20%

Paste and paste on the bottom

Select Element 38 - resize by 15%

Paste and position on the bottom left

Select Element 12 - resize by 20%

Paste and position on the bottom left

Select Element 65 - resize by 30%

Paste and position on the right side

Paste paper 1 on the canvas

Apply Mask 180 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

MILLIE GIRL

7:02 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Juisy for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Millie" which you can find here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Tree Element - resize by 50%

Paste and position on the top left

Select Deco 4 Element - resize by 40%

Paste and position on the top of the frame

Select City Element - resize by 55%

Paste and position in the center where desired

Select Greenery Element - resize by 55%

Paste and position on the bottom right

Select Plate Element - resize by 20%

Paste and position on the bottom right

Select Rose 2 Element - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Film Element - resize by 40%

Paste and position on the bottom left

Select Wings Element - resize by 15%

Paste and position on the bottom left

Select Lipstick 2 Element - resize by 50%

Paste and position on the bottom left

Select Pillow Element - resize by 25%

Paste and position on the bottom

Select Pills Element - resize by 25%

Paste and paste on the bottom

Select Perfume 2 Element - resize by 30%

Paste and position on the bottom

Select Polish Element - resize by 30%

Paste and position on the bottom

Select Powder Element - resize by 40%

Paste and position on the bottom

Select Boa Element - resize by 30%

Paste and position on the bottom

Select Jewel 2 Element - resize by 40%

Paste and position on the bottom

Select leaves Element - resize by 30%

Paste and position on the bottom

Select Flower 2 Element - resize by 65%

Paste and position on the top right

Select Sparkles 2 Element - resize by 55%

Paste and position on the canvas where desired

Paste paper 6 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz | 0 comments

Sunday, April 1, 2018

BEAUTIFUL COLORS

9:39 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Juisy for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Free Colors" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 1, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Element 23 - resize by 90%

Paste and position in the center of the canvas

Select Element 25 -

Paste and position in the center of the canvas

Select Element 21 - resize by 65%

Paste and position in the center of the canvas

Select Element 44 - resize by 30%

Paste and position on the bottom left

Select Element 7 - resize by 30%

Paste and position on the top left

Select Element 11 - resize by 75%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 15%

Paste and position on the bottom right

Select Element 14 - resize by 15%

Paste and position on the bottom right below the tube layer

Select Element 35 - resize by 25%

Image Free Rotate Right by 15% and paste on the top left

Select Element 12 - resize by 15%

Paste and position in the center where desired

Select Element 27 - resize by 20%

Paste and paste on the bottom left

Select Element 8 - resize by 35%

Paste and position on the bottom left

Select Element 50 - resize by 20%

Paste and position on the bottom left

Select Element 17 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 19 - resize by 25%

Paste and position on the bottom

Select Element 2 - resize by 10%

Paste and position on the bottom

Select Element 20 - resize by 12%

Paste and position on the bottom

Select Element 36 - resize by 40%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Saturday, March 31, 2018

UMBRELLA BABE

8:47 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Reineke Designs called "Umbrella Babe" which you can get by going here

Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 31, 2018. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Selecte Element 15 - paste and position in the center of the canvas

Select Frame Element 45 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Luminance (Legacy) and drop opacity down to 75%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 16 - resize by 25%

Image Free Rotate Left by 15% and paste on the top left

Select Element 4 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 10 - resize by 40%

Paste and position on the bottom right

Select Element 30 - resize by 40%

Paste and position on the bottom left

Select Element 23 - resize by 20%

Paste and position on the bottom left

Select Element 17 - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 30%

Paste and position on the bottom right

Select Element 21 - resize by 30%

Paste and position on the bottom right

Select Element 49 - resize by 30%

Paste and position on the bottom

Select Element 43 - resize by 40%

Paste and position on the bottom right

Select Element 14 - resize by 20%

Paste and paste on the bottom

Select Element 46 - resize by 20%

Paste and position on the bottom

Select Element 24 - resize by 15%

Paste and position on the bottom

Select Element 28 - resize by 50%

Paste and position on the canvas where desired

Paste paper 6 on the canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Labels

I CT For

Blog Archive

Facebook

CAT DANCER

MEAN QUEEN

CUTE PUNK

BEBA LATINA

MILLIE GIRL

BEAUTIFUL COLORS

UMBRELLA BABE

Search

Followers

My Blinkies

Favorite Blogs