Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Friday, December 30, 2016

KITTYLICIOUS XMAS SNAGS


These Extra's were made using the amazing artwork by Selisan Al-Gaib and kit by Rieneke Designs called "Mishel 2". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.

Sunday, December 18, 2016

CHRISTMAS BOX EXTRAS






These Extra's were made using the amazing artwork by Andy Cooper and kit by TagCatz Designs called "Christmas Box". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.

POLAR BEAR



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Polar Bears" which you can get by going here

Winter Mask 1 from Toxic Desirez which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 18, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Snow 4 Element - resize by 50%

Paste and position on the canvas where desired

Select Lights Element - resize by 50%

Paste and position on the top

Select Berries 3 - resize by 45%

Paste and position on the top left

Select Deco 4 Element - resize by 40%

Image mirror and paste on the top right

Select Tree 3 Element - resize by 40%

Paste and position on the left side

Select Ice 2 Element - resize by 65%

Paste and position on the bottom

Select PomPom Element - resize by 35%

Paste and position on the bottom right

Select Berries Element - resize by 40%

Image mirror and paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Igloo Element - resize by 50%

Paste and position on the bottom left

Select Sledge Element - resize by 40%

Paste and position on the left side above igloo

Select Polarbear Element - resize by 40%

Paste and position on the bottom left

Select Gift Element - resize by 35%

Paste and position on the bottom left

Select Ball 5 Element - resize by 30%

Paste and paste on the bottom left

Select Boots Element - resize by 35%

Paste and position on the bottom

Select Hat Element - resize by 30%

Paste and position on the bottom

Select Ball 8 Element - resize by 30%

Paste and position on the bottom

Select Bonbon 2 Element - resize by 30%

Paste and position on the bottom

Select Flower 3 Element - resize by 20%

Paste and position on the bottom

Select Key Element - resize by 35%

Paste and position on the bottom

Paste paper 3 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 17, 2016

PEPPERMINT KISSES



Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Peppermint Xmas" which you can get by going here

Winter Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 17, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 10 - resize by 55%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper layer below frame layer

Select Element 14 - resize by 65%

Paste and position on the top of the frame layer

Select Element 67 - resize by 20%

Paste and position on the top center

Select Element 45 - resize by 20%

Paste and position on the top right

Select Element 22 - resize by 35%

Paste and position on the bottom center where desired

Select Element 115 - resize by 10%

Paste and position on the house element where desired

Select Element 42 - resize by 15%

Paste and position on the bottom left

Select Element 39 - resize by 12%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 114 - resize by 10%

Paste and position on the bottom right

Select Element 135 - resize by 20%

Paste and position on the bottom right

Select Element 91 - resize by 12%

Paste and position on the bottom

Select Element 49 - resize by 12%

Paste and position on the bottom

Select Element 35 - resize by 20%

Paste and paste on the bottom

Select Element 93 - resize by 35%

Paste and position on the bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 102 - resize by 65%

Paste and position on the left side

Paste paper 4 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, December 11, 2016

WINTER WHITE



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Winter in Silver" which you can get by going here

Winter Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 11, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 1 Element - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper layer below frame layer

Select Wreath Element - resize by 65%

Paste and position on top of frame layer

Select Tree 4 Element - resize by 65%

Paste and position on the right side

Select House Element - resize by 55%

Paste and position on the left side

Select Snow Element - resize by 40%

Paste and position on the bottom

Select Figure 2 Element - resize by 50%

Paste and position on the bottom right

Select Gift 3 Element - resize by 50%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Fox Element - resize by 45%

Paste and position on the bottom

Select Flower 4 Element - resize by 25%

Paste and position on the bottom

Select Berries Element - resize by 30%

Paste and paste on the bottom

Select Orchid Element - resize by 25%

Paste and position on the bottom left

Select Heart Element - resize by 25%

Paste and position on the bottom left

Select Ball 7 Element - resize by 35%

Paste and position on the bottom left

Select Cones Element - resize by 35%

Paste and position on the bottom left

Select Box Element - resize by 30%

Paste and position on the bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

YANNILE



Supplies needed:

I am using the stunning artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "Yannile" which you can get by going here

Grunge Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 11, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Hard Light and drop opacity down to 85%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 20 - paste and position on top of frame layer

Select Element 46 - resize by 85%

Paste and position on the left side

Select Element 43 - resize by 30%

Paste and position on the right side

Select Element 5 - resize by 55%

Paste and position on the bottom right

Select Element 35 - resize by 20%

Paste and position on the bottom right below car element

Select Element 44 - resize by 40%

Image Free Rotate by 10% and paste on the bottom left

Select Element 22 - resize by 25%

Paste and position in the center below car element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 50%

Paste and position in the center of the canvas

Select Element 31 - resize by 25%

Paste and position on the bottom right above car element

Select Element 34 - resize by 40%

Paste and position on the bottom right

Select Element 16 - resize by 40%

Paste and position on the bottom

Select Element 48 - resize by 20%

Paste and paste on the bottom right

Select Element 29 - resize by 20%

Paste and position on the bottom

Select Element 47 - resize by 30%

Image mirror and paste and position on the bottom

Select Element 24 - resize by 20%

Image Free Rotate by 15% and paste and position on the bottom

Select Element 11 - resize by 25%

Paste and position on the bottom left

Select Element 41 - resize by 20%

Paste and position on the bottom left

Select Element 28 - resize by 20%

Paste and position on the bottom left

Select Element 23 - resize by 25%

Paste and position on the bottom left

Paste paper 6 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, December 5, 2016

RED NEW YEAR



These Extra's were made using the amazing artwork by Oky Draft and kit by Bibi's Collections called "Red 2015". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks. 

Sunday, December 4, 2016

KATANA WARRIOR EXTRAS




These Extra's were made using the amazing artwork by Danny Lee and kit by Mariel Designs called "Apocalypse Survivor". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.

GOTHIC WINTER



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Winter Flakes" which you can get by going here

Winter Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 4, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 6 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Luminance (Legacy)

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Deco4 Element - resize by 30%

Paste and position on the top center of the frame

Select Tree Element - resize by 45%

Paste and position on the right side

Select Tree 2 Element - resize by 50%

Paste and position on the right side

Select Star 2 Element - resize by 30%

Paste and position on the top of the tree element

Select Dragonfly Element - resize by 30%

Paste and position on the top left

Select Board Element - resize by 20%

Paste and position on the bottom right

Select Deco 5 Element - resize by 55%

Image flip and paste on the bottom where desired

Select Ribbon 3 Element - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Ball 4 Element - resize by 30%

Paste and position on the bottom right

Select Heart Element - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Flower 5 Element - resize by 25%

Paste and position on the bottom left

Select Bell Element - resize by 30%

Paste and position on the bottom left

Select Bears Element - resize by 40%

Paste and paste on the bottom left

Select Gift 4 Element - resize by 40%

Image mirror Paste and position on the bottom

Select Stars 2 Element - resize by 40%

Paste and position on the bottom left

Select WA2 Element - resize by 35%

Paste and position on the bottom left

Paste paper 9 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 3, 2016

PINKY XMAS



Supplies needed:

I am using the stunning artwork from Oky Draft for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Bibi's Collections called "Pinky Xmas" which you can get by going here

Winter Mask 1 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 3, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 65%

Image Free Rotate Left by 15% and Paste in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper layer below frame layer

Select Element 91 - resize by 25%

Paste and position on the top right corner

Select Element 86 - resize by 30%

Paste and position on the top left

Select Element 35 - resize by 8%

Paste and position on the top left

Select Element 69 - resize by 30%

Paste and position on the left side

Select Element 39 - resize by 10%

Paste and position on top of the tree element

Select Element 93 - resize by 30%

Image mirror and paste and position on the left side

Select Element 51 - resize by 12%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 78 - resize by 20%

Image Free Rotate Left by 15% and paste and position on the bottom right

Select Element 60 - resize by 20%

Paste and position on the bottom right

Select Element 34 - resize by 20%

Paste and position on the bottom left

Select Element 37 - resize by 15%

Paste and position on the left side

Select Element 73 - resize by 20%

Paste and paste on the bottom left

Select Element 50 - resize by 15%

Paste and position on the bottom left

Select Element 57 - resize by 15%

Paste and position on the bottom left

Select Element 49 - resize by 20%

Paste and position on the bottom

Select Element 94 - resize by 30%

Paste and position on the bottom

Select Element 55 - resize by 15%

Paste and position on the bottom

Select Element 44 - resize by 15%

Paste and position on the bottom

Paste paper 3 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif