Labels

I CT For

photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Sunday, December 26, 2021

READY FOR XMAS

8:44 AM | Posted by | Edit Post

Supplies needed:

Scrapkit: I am using a stunning matching kit by Yude's Kreations "Ready to Xmas" which you can get by going here

Winter Mask 1 by Fecnick which you can find here

Winter Brush 3 by Fecnick which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 26,  2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 13 and paste on the canvas

Apply Winter Mask 1 and merge group

Apply Winter Brush 3 to the bottom right

Select Sparkle Element 10  - resize by 40%
Paste and position on the left side

Select Element 31 - resize by 30%
Paste and position on the top left

Select Element 8 - resize by 25%
Paste and position on the top left

Select Element 2 - resize by 40%
Paste and position on the top center

Select Element 14 - resize by 25%
Paste and position on the top right

Select Element 78 - resize by 50%
Paste and position the top right

Select Element 6 - resize by 15%
Paste and position on the bottom left

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 15%
Paste and position on the bottom left

Select Element 34 - resize by 10%
Paste and position on the bottom left

Select Element 10 - resize by 15%
Paste and position on the bottom left

Select Element 85 - resize by 15%
Paste and position on the bottom 

Select Element 102 - resize by 20%
Paste and position on the bottom

Select Element 81 - resize by 20%
Paste and paste on the bottom 

Select Element 100 - resize by 40%
Image mirror and paste on the right side

Select Element 89 - resize by 55%
Paste and position on the bottom right

Select Element 83 - resize by 25%
Paste and position on the bottom right

Select Element 5 - resize by 15%
Paste and position on the bottom right

Select Element 64 - resize by 25%
Paste and position on the bottom right

Select Sparkle 3 - resize by 65%
Paste and position on the left side

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, November 21, 2021

SNOW WHITE ENCHANTED

6:38 AM | Posted by | Edit Post
Supplies needed:

Scrapkit: I am using a stunning kit by Mariel Designs "Snow White White" which you can get by going here

Mask 53 by Vivienne which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 21,  2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 9 and paste on the canvas
Apply Mask 53 and merge group

Select Element 27 - resize by 75%
Paste and position on the top left

Select Element 60 - resize by 55%
Paste and position on the top center

Select Element 19 - resize by 30%
Paste and position on the top left

Select Element 67 - resize by 22%
Paste and position on the top right

Select Element 58 - resize by 30%
Paste and position the bottom left

Select Element 51 - resize by 20%
Paste and position on the bottom left

Select Element 83 - resize by 20%
Image mirror and paste on the bottom left

Select Element 42 - resize by 55%
Paste and position on the bottom

Select Element 20 - resize by 40%
Paste and position on the bottom of the castle element

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 10 - resize by 40%
Paste and position on the bottom left

Select Element 76 - resize by 40%
Paste and position on the right side

Select Element 98 - resize by 15%
Paste and position on the bottom right

Select Element 48 - resize by 25%
Paste and position on the bottom right

Select Element 71 - resize by 30%
Paste and position on the right side

Select Element 6 - resize by 20%
Paste and paste on the bottom right

Select Element 41 - resize by 12%
Paste and position on the bottom

Select Element 13 - resize by 25%
Paste and position on the bottom 

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Tuesday, November 2, 2021

WITCHES EVE

10:58 AM | Posted by | Edit Post
Supplies needed:

Scrapkit: I am using a stunning kit by Yude's Kreationz "Witches Eve" which you can get by going here

Halloween Mask 2 by Fecnikek which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 2, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 12 and paste on the canvas
Apply Mask 2 and merge group

Select Element 69 - resize by 65%
Paste and position on the top left

Select Element 44 - resize by 30%
Paste and position on the top left

Select Element 56 - resize by 40%
Paste and position on the top left

Select Element 54 - resize by 40%
Paste and position on the left side

Select Element 91 - resize by 15%
Paste and position the top left

Select Element 125 - resize by 30%
Image mirror and paste on the right side

Select Element 53 - resize by 25%
Paste and position on the right side

Select Element 46 - resize by 30%
Image mirror and paste on the right side

Select Element 70 - resize by 12%
Paste and position on the right side

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 34 - resize by 75%
Paste and position on the bottom

Select Element 21 - resize by 30%
Paste and position on the top below tube layer

Select Element 86 - resize by 30%
Paste and position on the bottom left

Select Element 128 - resize by 30%
Paste and position on the bottom left

Select Element 88 - resize by 30%
Paste and position on the left side

Select Element 47 - resize by 30%
Paste and position on the bottom left

Select Element 92 - resize by 30%
Paste and position on the bottom left

Select Element 57 - resize by 15%
Paste and paste on the bottom left

Select Element 138 - resize by 30%
Paste and position on the bottom left

Select Element 25 - resize by 25%
Paste and position on the bottom left

Select Element 61 - resize by 15%
Paste and position on the bottom left

Select Element 23 - resize by 15%
Paste and position on the bottom 

Select Element 143 - resize by 30%
Paste and position on the bottom 

Select Element 50 - resize by 30%
Image mirror and paste and on the bottom right

Select Element 90 - resize by 12%
Paste and position on the bottom right

Select Elemenet 49 - resize by 20%
Paste and position on the bottom right

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, October 30, 2021

VIOLET WITCH

5:52 PM | Posted by | Edit Post
Supplies needed:

I am using the gorgeous artwork from Ishika Chowdhury for this tutorial which you can get here

Scrapkit: I am using a stunnin kit by Wicked Diabla "Cherry" which you can get by going here

Mask 76 by Karmalized Scraps which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 30, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 1 and paste on the canvas
Apply Mask 76 and merge group

Select Element 9 - resize by 75%
Paste and position on the top left

Select Element 58 - resize by 40%
Paste and position on the top right

Select Element 115 - resize by 30%
Paste and position on the top right 

Select Element 79 - resize by 20%
Paste and position on the top right

Select Element 78 - resize by 75%
Paste and position the right side

Select Element 51 - resize by 30%
Paste and position on the left side

Select Element 66 - resize by 20%
Paste and position on the top left

Select Element 110 - resize by 25%
Paste and position on the bottom left

Select Element 105 - resize by 15%
Paste and position on the bottom left

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 83 - resize by 30%
Paste and position on the bottom left

Select Element 73 - resize by 25%
Paste and position on the bottom left

Select Element 92 - resize by 25%
Paste and position on the bottom left

Select Element 5 - resize by 40%
Paste and position on the bottom left

Select Element 60 - resize by 20%
Paste and position on the bottom left

Select Element 70 - resize by 20%
Paste and paste on the left side

Select Element 43 - resize by 30%
Paste and position on the bottom right

Select Element 45 - resize by 30%
Paste and position on the right side

Select Element 99 - resize by 25%
Paste and position on the bottom right

Select Element 38 - resize by 30%
Paste and position on the bottom right

Select Element 69 - resize by 20%
Paste and position on the bottom right

Select Element 88 - resize by 25%
Paste and position on the bottom right

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Friday, October 22, 2021

CUTE WITCH

2:55 PM | Posted by | Edit Post

Supplies needed:

I am using the gorgeous artwork from Tarya for this tutorial which you can get here

Scrapkit: I am using a stunning matching kit by Happy Pumpkin Studios "Cute Witch" which you can get by going here

Mask 92 by Vivienne which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 22,  2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 23 and paste on the canvas
Apply Mask 92 and merge group

Select Element 21 - resize by 30%
Paste and position on the top left

Select Element 43 - resize by 30%
Paste and position on the top right

Select Element 23 - resize by 30%
Paste and position on the top right

Select Element 94 - resize by 30%
Image mirror paste and position on right side

Select Element 34 - resize by 25%
Paste and position the left side

Select Element 46 - resize by 40%
Paste and position on the left side

Select Element 42 - resize by 30%
Paste and position on the bottom left

Select Element 96 - resize by 40%
Paste and position on the left side

Select Element 69 - resize by 30%
Paste and position on the bottom left

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 55 - resize by 15%
Paste and position on the left side

Select Element 49 - resize by 20%
Paste and position on the bottom left

Select Element 20 - resize by 15%
Paste and position on the bottom left

Select Element 97 - resize by 15%
Paste and position on the bottom left

Select Element 45 - resize by 25%
Paste and position on the bottom right

Select Element 9 - resize by 25%
Paste and paste on the bottom right

Select Element 70 - resize by 30%
Paste and position on the bottom right

Select Element 62 - resize by 20%
Paste and position on the bottom right

Select Element 53 - resize by 15%
Paste and position on the bottom right

Select Element 98 - resize by 15%
Paste and position on the bottom

Select Element 4 - resize by 20%
Paste and position on the bottom

Select Element 86 - resize by 30%
Paste and position on the bottom 


Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, October 10, 2021

MAGICAL WITCHCRAFT

8:20 AM | Posted by | Edit Post
Supplies needed:

Scrapkit: I am using a stunning kit by Curious Creative Dreams "Magical Witchcraft" which you can get by going here

Halloween Mask 1 by Fecnikek which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 10,  2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 4 and paste on the canvas
Apply Mask 1 and merge group

Select Paper 8
Reapply Mask 1 and merge group and change to Overlay

Select Element 8 - resize by 65%
Paste and position on the top center

Select Element 11 - resize by 75%
Image mirror and paste on the right side

Select Element 48 - resize by 55%
Paste and position on the top right

Select Element 28 - resize by 30%
Paste and position on left side

Select Element 24 - resize by 30%
Paste and position the left side

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 20%
Paste and position on the bottom left

Select Element 30 - resize by 25%
Paste and position on the bottom left

Select Element 42 - resize by 25%
Paste and position on the bottom

Select Element 60 - resize by 25%
Paste and position on the bottom

Select Element 43 - resize by 20%
Paste and position on the bottom 

Select Element 49 - resize by 20%
Paste and paste on the bottom 

Select Element 9 - resize by 30%
Paste and position on the right side

Select Element 34 - resize by 30%
Paste and position on the bottom right

Select Element 19 - resize by 25%
Paste and position on the bottom right

Select Element 22 - resize by 25%
Paste and position on the bottom right

Select Element 29 - resize by 25%
Paste and position on the bottom right

Select Element 41 - resize by 25%
Paste and position on the bottom right

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, September 26, 2021

GOOD WITCH

7:44 AM | Posted by | Edit Post
Supplies needed:

Scrapkit: I am using a stunning kit by Yude's Kreationz "Good Witch" which you can get by going here and here
Mask 367 by Mizteeques which you can find here 
Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).
This tutorial was written by me on September 26,  2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 1 and paste on the canvas
Apply Mask 376 and merge group

Select Element 82 - resize by 30%
Paste and position on the top left

Select Element 11 - resize by 30%
Paste and position on the top right

Select Element 48 - 
Paste and position in the center

Select Element 87 - resize by 20%
Paste and position on the right side

Select Element 23 - resize by 8%

Paste and position the left side
Select Element 86 - resize by 10%

Paste and position on the bottom left
Select Element 19 - resize by 25%

Paste and position on the bottom left
Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings
Select Element 126 - resize by 40%

Paste and position on the bottom left
Select Element 91 - resize by 15%

Paste and position on the bottom left
Select Element 117 - resize by 15%

Paste and position on the bottom left
Select Element 27 - resize by 30%

Image mirror and paste on the right side
Select Element 125 - resize by 30%

Paste and position on the top right
Select Element 120 - resize by 40%

Paste and paste on the right side
Select Element 129 - resize by 15%

Paste and position on the right side
Select Element 21 - resize by 10%

Paste and position on the bottom right
Select Element 130 - resize by 25%

Paste and position on the bottom right
Select Element 98 - resize by 15%

Paste and position on the bottom right
Select Element 115 - resize by 20%

Paste and position on the bottom right
Select Element 97 - resize by 15%

Paste and position on the bottom right
Select Element 102 - resize by 15%

Paste and position on the bottom 
Select Element 65 - resize by 15%

Paste and position on the bottom 
Select Element 3 - resize by 20%

Paste and position on the bottom 
Select Element 75 - resize by 30%

Paste and position on the bottom right
Add any dropshadows you like 

Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!


Labels: | 0 comments
Saturday, September 25, 2021

MAGIC GOTHIC

10:25 AM | Posted by | Edit Post

These CT Tags were made using the amazing kit Magic Gothic by Chili's Designz. You can purchase the kit here

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks!
Labels: | 0 comments
Monday, September 20, 2021

DARK OASIS

12:36 PM | Posted by | Edit Post
Supplies needed:

Scrapkit: I am using a stunning matching kit by Happy Pumpkin Studio "Dark Oasis" which you can get by going here and here

Halloween Mask 3 by Fecnikek which you can find here

Plugins:  Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 19,  2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 10 and paste on the canvas
Apply Mask 3 and merge group

Select Element 71 - resize by 40%
Paste and position on the top right

Select Element 95 - resize by 40%
Paste and position on the top left

Select Element 51 - resize by 30%
Image mirror and paste on the top center

Select Element 134 - resize by 40%
Paste and position on the top left

Select Element 116 - resize by 30%
Paste and position on the right side

Select Element 126 - resize by 30%
Paste and position on the right side

Select Element 15 - resize by 30%
Paste and position on the left side

Select Element 20 - resize by 15%
Paste and position on the top left

Select Element 154 - resize by 25%
Paste and position on the left side

Select Element 34 - resize by 40% 
Paste and position on the left side

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 99 - resize by 30%
Paste and position on the bottom left

Select Element 123 - resize by 15%
Paste and position on the bottom left

Select Element 143 - resize by 40%
Paste and position on the bottom left

Select Element 66 - resize by 30%
Paste and position on the bottom left

Select Element 61 - resize by 10%
Paste and position on the bottom left

Select Element 141 - resize by 20%
Paste and paste on the bottom left

Select Element 64 - resize by 30%
Paste and position on the bottom

Select Element 89 - resize by 15%
Paste and position on the bottom 

Select Element 69 - resize by 10%
Paste and position on the bottom 

Select Element 117 - resize by 20%
Paste and position on the bottom right

Select Element 87 - resize by 10%
Paste and position on the bottom right

Select Element 107 - resize by 15%
Paste and position on the bottom right       

Select Element 110 - resize by 15%
Paste and position on the bottom right

Select Element 118 - resize by 25%
Paste and position on the bottom right

Select Element 9 - resize by 15%  
Paste and position on the top right

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!

Labels: | 0 comments
Thursday, September 9, 2021

LOST GIRL

9:53 AM | Posted by | Edit Post
Supplies needed: 
 I am using the gorgeous artwork from Yuriko Shirou for this tutorial which you can get here
 Scrapkit: I am using a stunning matching kit by Curious Creative Dreams "IB-YurikoShirou 21-3" which you can get by going here
 Mask 50 by Vivienne which you can find here 
 Plugins: Lokas 3D Shadow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on September 9, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often.
 Open up a 750 x 650 blank canvas (we can resize it later)

 Select Paper 2 and paste on the canvas
 Apply Mask 50 and merge group

 Select Frame 1 Element - resize by 65% 
 Paste and position on the top left 
 Select your selections tool and select the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0) 
 Select modify, expand by 5 
 Paste paper 4 
 Select invert, delete 
 Paste close-up tube of choice above paper layer and delete 
 Select none Change close-up to Hard Light 
 Apply dropshadow and merge down on paper layer 
 Move below frame 

 Select Element 15 - resize by 65%
 Paste and position on the left side 

 Select Element 16 - resize by 55% 
 Paste and position on the bottom left

 Select Element 20 - resize by 75% 
 Image Free Rotate Left by 15% and paste on the top right 

 Select Element 14 - resize by 50% 
 Paste and position the bottom 

 Select Element 19 - resize by 55% 
Paste and position on the bottom

Paste tube of choice where desired
Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 40%
Paste and position on the bottom left

Select Element 10 - resize by 50%
Paste and position on the bottom left

Select Element 6 - resize by 50%
Paste and position on the right side

Select Element 4 - resize by 80%
Image Free Rotate Left by 15% and paste on the bottom right

Select W1 Element  - resize by 40%
Paste and position on the bottom 

Select Element 12 - resize by  50%
Paste and paste on the bottom 

Select Element 18 - resize by 30%
Image Free Rotate Right by 15% and paste on the bottom right

Add any dropshadows you like 
Sharpen any elements as needed
Crop and resize as desired
Add copyright info, license number and name
You're done!  Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, September 5, 2021

LADY MACHINERY

12:55 PM | Posted by | Edit Post
Supplies needed:
 I am using the gorgeous artwork from Andy Cooper for this tutorial which you can get here
 Scrapkit: I am using a stunning matching kit by Mariel Designs "Lady Machinery" which you can get by going here
 Mask 261 by Mizteeques which you can find here
 Plugins: Lokas 3D Shadow 
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on September 5, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later)

 Select Paper 6 and paste on the canvas
 Apply Mask 261 and merge group 

 Select Element 42 - resize by 50% 
 Paste and position in the center

 Select Element 61 - resize by 40%
 Paste and position on the top left

 Select Element 99 - resize by 20% 
 Paste and position on the top left

 Select Element 64 - resize by 25%
 Paste and position on the top left 

 Select Element 16 - resize by 20% 
 Paste and position on the top right 

 Select Element 65 - resize by 55% 
 Paste and position the bottom center

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings

 Select Element 95 - resize by 20% 
 Paste and position on the left side

 Select Element 12 - resize by 50% 
 Paste and position on the left side

 Select Element 63 - resize by 30% 
 Paste and position on the right side 

 Select Element 7 - resize by 30% 
 Paste and position on the right side 

 Select Element 54 - resize by 20%
 Paste and paste on the bottom left 

 Select Element 19 - resize by 20% 
 Paste and position on the bottom left

 Select Element 32 - resize by 20% 
 Paste and position on the bottom left

 Select Element 80 - resize by 40% 
 Paste and position on the bottom right 

 Select Element 82 - resize by 20%
 Paste and position on the bottom right

 Select Element 13 - resize by 25% 
 Paste and position on the bottom right 

 Select Element 24 - resize by 20%
 Paste and position on the bottom right

 Select Element 28 - resize by 20% 
 Paste and position on the bottom 

 Add any dropshadows you like 
 Sharpen any elements as needed
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, September 4, 2021

TILDA

1:28 PM | Posted by | Edit Post
Supplies needed: 
 I am using the gorgeous artwork from Tarya for this tutorial which you can get here
 Scrapkit: I am using a stunning matching kit by Yude's Kreationz "Tilda" which you can get by going here
 Mask 91 by Vivienne which you can find here
 Plugins: Lokas 3D Shadow 
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on September 4, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later) 

 Select Paper 1 and paste on the canvas 
 Apply Mask 91 and merge group 

 Select Element 7 - resize by 30% 
 Paste and position on the top right 

 Select Element 82 - resize by 25%
 Paste and position on the top left 

 Select Element 29 - resize by 30%
 Paste and position on the top left 

 Select Element 38 - resize by 30% 
 Paste and position on the top right 

 Select Element 2 - resize by 40% 
 Paste and position on the top left 

 Select Element 34 - resize by 25% 
 Paste and position the top right

 Select Element 41 - resize by 30%
 Paste and position on the top left

 Select Element 9 - resize by 30% 
 Paste and position on the left side

 Select Element 36 - resize by 15% 
 Paste and position on the left side

 Select Element 57 - resize by 30% 
 Paste and position on the left side 

 Select Element 68 - resize by 25%
 Paste and position on the bottom left 

 Select Element 25 - resize by 20% 
 Paste and position on the bottom left

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

 Select Element 67 - resize by 15% 
 Paste and position on the bottom 

 Select Element 46 - resize by 30% 
 Paste and position on the bottom right

 Select Element 11 - resize by 25% 
 Paste and position on the bottom right 

 Select Element 45 - resize by 30% 
 Paste and position on the bottom right

 Select Element 35 - resize by 15% 
 Paste and paste on the bottom right 

 Select Element 23 - resize by 30%
 Paste and position on the bottom right

 Select Element 33 - resize by 12% 
 Paste and position on the bottom right

 Select Element 8 - resize by 40% 
 Paste and position on the left side

 Add any dropshadows you like
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Wednesday, September 1, 2021

PROUD AMERICAN

5:25 PM | Posted by | Edit Post
Supplies needed: I am using the gorgeous artwork from Ishika Chowdhury for this tutorial which you can get here
 Scrapkit: I am using a stunning matching kit by Kizzed by Kelz "Zoe4th" which you can get by going here 
 Patriot Mask 4 by Dee which you can find here
 Plugins: Lokas 3D Shadow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on September 1, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later) 

 Select Paper 27 and paste on the canvas 
 Apply Mask 4 and merge group 

 Select Element 11 - resize by 90% 
 Paste and position in the center 
 Select your magic wand tool and click in the center squares of each Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0) 
 Selections, Modify, Expand by 5 
 Paste paper 29 Select invert, delete, select none
 Move paper below frame layer

 Select Element 79 - resize by 50% 
 Paste and position on the top left 

 Select Element 96 - resize by 50% 
 Paste and position on the top left 
 Apply Eyecandy Gradient Glow on fat default settings (glow width 3) 

 Select Element 34 - resize by 30% 
 Paste and position on the top right 

 Select Element 107 - resize by 40%
 Paste and position on the top right
 Apply Eyecandy Gradient Glow on fat default settings (glow width 3) 

 Select Element 132 - resize by 30%
 Paste and position the left side 
 Duplicate element and resize by 80%
 Image mirror and place on the bottom right 

 Select Element 76 - resize by 80% 
 Image Free Rotate Left by 15% and paste in the center 

 Select Element 39 - resize by 25%
 Paste and position on the left side 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings

 Select Element 64 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 38 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 33 - resize by 25% 
 Paste and position on the bottom left

 Select Element 84 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 24 - resize by 25% 
 Paste and position on the bottom

 Select Element 121 - resize by 30%
 Image Free Rotate Left by 15% and paste on the bottom left 

 Select Element 22 - resize by 25% 
 Paste and position on the bottom right 

 Select Element 91 - resize by 25% 
 Paste and position on the bottom right 

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done!
 Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, August 29, 2021

GOTHIC DARKNESS

12:42 PM | Posted by | Edit Post


These CT Tags were made using the amazing kit  Gothic Darkness by Chili's Designz. You can purchase the kit here

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks
Labels: | 0 comments
Monday, August 23, 2021

THE UNKNOWN

1:23 PM | Posted by | Edit Post
Supplies needed: 
 Scrapkit: I am using a stunning kit by Curious Creative Dreams "The Unknown" which you can get by going here
 Mask 93 by Vivienne which you can find here 
 Plugins: Lokas 3D Shadow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on August 23, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 

 Open up a 750 x 650 blank canvas (we can resize it later) 
 Select Paper 4 and paste on the canvas 
 Apply Mask 93 and merge group 

 Select Element 7 - resize by 40% 
 Paste and position on the top center 
 Duplicate image and reposition on the top right 

 Select Element 10 - resize by 75% 
 Paste and position on the left side 

 Select Element 2 - resize by 30% 
 Paste and position on the top right 

 Select Element 35 - resize by 50%
 Paste and position on the bottom right 

 Select Element 30 - resize by 75%
 Paste and position on the bottom 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings

 Select Element 21 - resize by 50% 
 Paste and position on the bottom left 

 Select Element 22 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 15 - resize by 30% 
 Paste and position on the bottom left 

 Select Element 6 - resize by 20% 
Paste and position on the bottom left 

 Select Element 5 - resize by 25%
 Paste and position on the bottom 

 Select Element 1 - resize by 25% 
 Paste and paste on the bottom 

 Select Element 14 - resize by 25% 
 Image mirror and paste on the right side 

 Select Element 3 - resize by 20% 
 Paste and position on the bottom right

 Select Element 24 - resize by 30%
 Paste and position on the bottom right

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Tuesday, August 10, 2021

FAIRYTALE NIGHTMARES

6:10 PM | Posted by | Edit Post
Supplies needed:
 I am using the gorgeous artwork from Anna Marine for this tutorial which you can get here 
 Scrapkit: I am using a stunning kit by Kizzed by Kelz "Fairytale Nightmares" which you can get by going here
 Halloween Mask by Fecnikek which you can find here
 Plugins: Lokas 3D Shadow 
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on August 10, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later) 

 Select Paper 15 and paste on the canvas 
 Apply Halloween Mask and merge group 

 Select Element 87 - resize by 65%
 Paste and position on the top right 

 Select Element 147 - resize by 55% 
 Paste and position on the top left 

 Select Element 16 - resize by 30% 
 Paste and position on the top right 

 Select Element 112 - resize by 50% 
 Paste and position on the right side 

 Select Element 108 - resize by 25%
 Paste and position the left side

 Select Element 84 - resize by 30% 
 Paste and position on the top left 

 Select Element 5 - resize by 22% 
 Paste and position on the top left 

 Select Element 61 - resize by 65% 
 Paste and position on the left side 

 Select Element 111 - resize by 40% 
 Paste and position on the right side

 Paste tube of choice where desired
 Apply Lokas 3D Shadow at default settings

 Select Element 95 - resize by 30% 
 Paste and position on the bottom left

 Select Element 107 - resize by 30%
 Paste and position on the bottom left 

 Select Element 81 - resize by 30% 
 Paste and position on the bottom 

 Select Element 115 - resize by 40% 
 Paste and position on the bottom

 Select Element 149 - resize by 20%
 Paste and position on the bottom right

 Select Element 1 - resize by 30%
 Paste and paste on the bottom right 

 Select Element 68 - resize by 30%
 Paste and position on the bottom right 

 Select Element 44 - resize by 25% 
 Paste and position on the bottom right 

 Select Element 76 - resize by 30%
 Paste and position on the bottom right 

 Select Element 144 - resize by 25% 
 Paste and position on the top right 

 Select Element 54 - resize by 65% 
 Paste and position on the top left
 Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

 Add any dropshadows you like 
 Sharpen any elements as needed
 Crop and resize as desired
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, July 31, 2021

JAPANESE FESTIVAL

8:18 AM | Posted by | Edit Post
Supplies needed: 
 I am using the gorgeous artwork from Andy Cooper for this tutorial which you can get here
 Scrapkit: I am using a stunning kit by Mariel Designs "Japanese Festival" which you can get by going here
 Mask 313 by Mizteeques which you can find here
 Plugins: Lokas 3D Shadow
 ---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on July 31, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. 
 Ok - let's start and remember to save often. 

 Open up a 750 x 650 blank canvas (we can resize it later) 

 Select Paper 7 and paste on the canvas 
 Apply Mask 313 and merge group

 Select Element 90 - resize by 50%
 Paste and position on the top left

 Select Element 1 - resize by 65%
 Paste and position on the top right

 Select Element 113 - resize by 20% 
 Paste and position on the top right

 Select Element 69 - resize by 40% 
 Paste and position on the top left

 Select Element 7 - resize by 50% 
 Paste and position the top left

 Select Element 99 - resize by 40% 
 Image mirror and paste on the left side 

 Select Element 87 - resize by 65% 
 Paste and position on the left side 

 Select Element 47 - resize by 30%
 Paste and position on the bottom

 Select Element 92 - resize by 30% 
 Paste and position on the bottom right 

 Select Element 21 - resize by 25%
 Paste and position on the bottom right 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings

 Select Element 8 - resize by 40% 
 Paste and position on the top right

 Select Element 65 - resize by 25%
 Paste and position on the bottom left 

 Select Element 52 - resize by 25%
 Paste and position on the bottom left 

 Select Element 66 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 107 - resize by 10% 
 Paste and position on the bottom left

 Select Element 114 - resize by 25% 
 Paste and paste on the bottom 

 Select Element 76 - resize by 15% 
 Paste and position on the bottom

 Select Element 19 - resize by 25%
 Paste and position on the top left 

 Select Element 5 - resize by 25% 
 Paste and position on the bottom right 

 Select Element 15 - resize by 25%
 Paste and position on the bottom 

 Select Element 28 - resize by 20%
 Paste and position on the bottom

 Select Element 112 - resize by 20%
 Paste and position on the bottom

 Add any dropshadows you like 
 Sharpen any elements as needed 
 Crop and resize as desired 
 Add copyright info, license number and name You're done!
 Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, July 24, 2021

GLUTTONY LOVE

7:27 AM | Posted by | Edit Post




These CT Tags were made using the amazing kit Gluttony Love by Chili's Designz. You can purchase the kit here

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks
Labels: | 0 comments
Sunday, July 18, 2021

LIVING DEAD

10:47 AM | Posted by | Edit Post
Supplies needed:
 I am using the gorgeous artwork from Atarika for this tutorial which you can get here
 Scrapkit: I am using a stunning matching kit by Yude's Kreationz "Living Dead" which you can get by going here 
 Mask 836 by Rachel Designs which you can find here 
 Plugins: Lokas 3D Shadow 
---------------------------- 
 This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on July 18, 2021. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental. Ok - let's start and remember to save often. 
 Open up a 750 x 650 blank canvas (we can resize it later) 

 Select Paper 16 and paste on the canvas 
 Apply Mask 836 and merge group 

 Select Paper 2 and paste on the canvas on top of mask layer
 Reapply mask 836 and merge group Change layer to Luminence (Legacy) 

 Select Element 69 - resize by 55%
 Paste and position on the top center 

 Select Element 65 - resize by 40%
 Paste and position on the top left 

 Select Element 111 - resize by 30% 
 Paste and position on the top right 

 Select Element 57 - resize by 25% 
 Paste and position on the top right 

 Select Element 53 - resize by 55% 
 Paste and position the right side

 Select Element 25 - resize by 20% 
 Paste and position on the right side

 Select Element 6 - resize by 30% 
 Paste and position on the bottom right

 Select Element 5 - resize by 30% 
 Paste and position on the left side 

 Paste tube of choice where desired 
 Apply Lokas 3D Shadow at default settings 

 Select Element 18 - resize by 20% 
 Paste and position on the left side 

 Select Element 46 - resize by 25% 
 Paste and position on the bottom left 

 Select Element 8 - resize by 25%
 Paste and position on the left side

 Select Element 63 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 105 - resize by 20% 
 Paste and position on the bottom left 

 Select Element 80 - resize by 50% 
 Paste and paste on the bottom 

 Select Element 109 - resize by 50% 
 Paste and position on the bottom left 

 Select Element 77 - resize by 5% 
 Paste and position on the bottom left 

 Select Element 66 - resize by 15% 
 Paste and position on the bottom

 Select Element 96 - resize by 20%
 Paste and position on the bottom right

 Select Element 97 - resize by 30%
 Paste and position on the bottom right 

 Add any dropshadows you like
 Sharpen any elements as needed
 Crop and resize as desired 
 Add copyright info, license number and name You're done! 
 Thanks for trying my tutorial!
Labels: | 0 comments
Subscribe to: Posts (Atom)

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







photo milliespspmadness_zps1b81d2e9.gif