Labels

I CT For

photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Saturday, November 30, 2019

RED WOOLEN

1:58 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Mariel Designs called "Red Woolen" which you can get by going here

Mask 41 from Kopona which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 30, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 5 and paste on the canvas

Apply Mask 41 and merge group

Select Element 11 - resize by 65%

Paste and position in on the top left

Select Element 69 - resize by 65%

Paste and position on the top left

Select Frame Element 1 - resize by 50%

Paste and position on the top right

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Luminance Legacy

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame element

Select Element 66 - resize by 40%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 23 - resize by 50%

Image mirror and paste on the right side

Select Element 77 - resize by 25%

Paste and position on the bottom right

Select Element 61 - resize by 15%

Paste and position on the bottom right

Select Element 53 - resize by 75%

Paste and position on the right side

Select Element 25 - resize by 40%

Paste and position on the bottom right

Select Element 30 - resize by 15%

Paste and paste on the bottom right

Select Element 83 - resize by 20%

Paste and position on the bottom right

Select Element 44 - resize by 40%

Paste and position on the bottom below tube

Select Element 70 - resize by 40%

Paste and position on the bottom below tube layer

Select Element 82 - resize by 25%

Paste and position on the bottom

Select Element 74 - resize by 15%

Paste and position on the bottom

Select Element 68 - resize by 25%

Paste and position on the bottom left

Select Element 49 - resize by 15%

Paste and position on the bottom left

Select Element 2 - resize by 25%

Paste and position on the bottom left

Select Element 48 - resize by 30%

Paste and position on the left side

Select Element 91 - resize by 50%

Paste and position on the left side

Select Element 84 - resize by 50%

Paste and position on the bottom right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels: | 0 comments

AUTUMN GEAR

7:09 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Chachaz Creationz called "Autumn Gear" which you can get by going here

Mask 66 from Vivienne which you can find here

Plugins: Lokas 3D Shadow, Eyecandy - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 30, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper and paste on the canvas

Apply Mask 66 and merge group

Select Paper 7 and paste on the canvas

Paste paper 5

Select Element 60 - resize by 65%

Paste and position on the top center

Select Element 35 - resize by 40%

Paste and position on the top right

Select Element 49 - resize by 40%

Paste and position on the top right

Select Element 65 - resize by 50%

Paste and position on the top left

Select Element 70 - resize by 50%

Paste and position on the top left

Select Element 10 - resize by 75%

Paste and position in the center

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 54 - resize by 40%

Paste and position on the bottom left

Select Element 22 - resize by 50%

Paste and position on the bottom left

Select Element 30 - resize by 25%

Paste and position on the bottom left

Select Element 72 - resize by 25%

Paste and position on the bottom left

Select Element 17 - resize by 25%

Paste and position on the bottom right

Select Element 23 - resize by 20%

Paste and paste on the bottom right

Select Element 63 - resize by 40%

Paste and position on the bottom right

Select Element 59 - resize by 20%

Paste and position on the bottom right

Select Element 13 - resize by 40%

Paste and position on the bottom

Select Element 4 - resize by 40%

Paste and position on the bottom right

Select Element 52 - resize by 30%

Paste and position on the bottom

Select Element 58 - resize by 40%

Paste and position on the bottom

Select Element 2 -

Paste and position in the center where desired

Select Element 62 - resize by 40%

Paste and position on the top right

Apply Eyecandy Gradient Glow on fat default settings

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Wednesday, November 20, 2019

RASPBERRY CURRANT

6:46 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Bookworm Dezigns called "Raspberry Currant" which you can get by going here

Fall Mask 4 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 20, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 13 and paste on the canvas

Apply Mask 4 and merge group

Select Element 16 - resize by 50%

Paste and position on the top left

Select Element 8 - resize by 25%

Image mirror and paste on the top right

Select Element 9 - resize by 15%

Paste and position on the top left

Select Element 14 - resize by 55%

Paste and position on the bottom

Select Element 56 - resize by 20%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 93 - resize by 15%

Image Free Rotate Right by 15% and paste on the left side

Select Element 35 - resize by 30%

Paste and position on the right side

Select Element 7 - resize by 15%

Paste and position on the bottom right

Select Element 57 - resize by 15%

Paste and position on the bottom right

Select Element 6 - resize by 15%

Paste and position on the top right

Select Element 26 - resize by 15%

Paste and paste on the right side

Select Element 5 - resize by 20%

Paste and position on the bottom right

Select Element 38 - resize by 15%

Paste and position on the bottom right

Select Element 10 - resize by 15%

Paste and position on the bottom

Select Element 23 - resize by 15%

Paste and position on the bottom

Select Element 100 - resize by 15%

Paste and position on the bottom

Select Element 55 - resize by 20%

Paste and position on the bottom right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, November 17, 2019

AUTUMN SCARECROW

4:10 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Chili's Designz called "Scarecrow History" which you can get by going here

Fall Mask 3 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 17, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 9 and paste on the canvas

Apply Mask 3 and merge group

Select Corner Element - resize by 55%

Paste and position on the top left

Select Wheel Element - resize by 40%

Paste and position on the left side

Select Deco Element - resize by 30%

Image mirror and paste on the top right

Select Leaves 3 Element - resize by 40%

Paste and position in the center of the canvas

Select Pumpkin 2 Element - resize by 40%

Paste and position in the center

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Flower 2 Element - resize by 30%

Paste and position on the bottom left

Select Owl Element - resize by 30%

Paste and position on the bottom left

Select Straw Element - resize by 40%

Paste and position on the left side

Select Lamp Element - resize by 40%

Paste and position on the bottom left

Select Bottles 2 Element - resize by 30%

Paste and position on the bottom left

Select Berry Element - resize by 40%

Paste and paste on the right side

Select Scarecrow Element - resize by 40%

Paste and position on the right side

Select Pumpkins Element - resize by 40%

Paste and position on the right side

Select Candles Element - resize by 30%

Paste and position on the bottom right

Select Deco 2 Element - resize by 40%

Paste and position on the bottom right

Select Flower 7 Element - resize by 30%

Paste and position on the bottom right

Select Nuts Element - resize by 30%

Paste and position on the bottom below tube layer

Select Hedge Element - resize by 30%

Paste and position on the bottom

Select Bird Element - resize by 25%

Paste and position on the bottom

Select Butterfly Element - resize by 30%

Image Free Rotate by 15% and paste on the top right

Select Sparkles 4 Element - resize by 50%

Paste and position on left side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Thursday, November 14, 2019

AUTUMN MAGIC

4:58 PM | Posted by | Edit Post

Supplies needed:

Scrapkit: I am using a beautiful kit from Mariel Designs called "Magic Autumn" which you can get by going here

Fall Mask 1 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 14, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2 and paste on the canvas

Apply Mask 1 and merge group

Select Element 106 - resize by 60%

Paste and position on the top right

Select Frame Element 4 - resize by 40%

Paste and position on the left side

Select your magic wand tool and select the center open spaces of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Duplicate close-up, apply Gaussian Blur at 4 and change to Overlay

Move paper layer and closeups below frame element

Select Element 29 - resize by 30%

Paste and position on the top left below fram layer

Select Element 104 - resize by 30%

Paste and position on the top left

Select Element 96 - resize by 25%

Paste and position on the top right

Select Element 9 - resize by 25%

Paste and position on the bottom left

Select Element 23 - resize by 22%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 1 - resize by 20%

Paste and position on the right side

Select Element 8 - resize by 20%

Paste and position on the right side

Select Element 49 - resize by 25%

Paste and position on the right side

Select Element 75 - resize by 40%

Paste and position on the bottom right below tube

Select Element 53 - resize by 40%

Paste and position on the bottom right

Select Element 10 - resize by 20%

Paste and paste on the bottom right

Select Element 13 - resize by 30%

Paste and position on the bottom right

Select Element 59 - resize by 25%

Paste and position on the bottom right

Select Element 35 - resize by 25%

Paste and position on the bottom right

Select Element 49 - resize by 20%

Paste and position on the bottom

Select Element 92 - resize by 20%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Monday, November 11, 2019

HALLOWEEN PARTY

5:43 PM | Posted by | Edit Post

Supplies needed:

Scrapkit: I am using a beautiful kit from Gothic Raven Designs called "Halloween Party" which you can get by going Here, Here and Here

Mask 2 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 11, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 1 and paste on the canvas

Apply Mask 2 and merge group

Select Element 96 - resize by 40%

Paste and position on the top left

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 2

Paste paper 4

Select invert, delete, select none

Select Element 67 - resize by 50%

Paste and position on the top right side

Select Element 28 - resize by 20%

Paste and position on the top

Select Element 92 - resize by 30%

Paste and position on the left side

Select Element 45 - resize by 15%

Image Free Rotate Right by 15% and paste on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 40%

Paste and position on the bottom left

Select Element 43 - resize by 15%

Paste and position on the bottom right

Select Element 107 - resize by 20%

Paste and position on the bottom right

Select Element 77 - resize by 25%

Paste and position on the bottom right

Select Element 94 - resize by 20%

Paste and position on the bottom

Select Element 59 - resize by 15%

Paste and paste on the bottom

Select Element 87 - resize by 15%

Paste and position on the bottom

Select Element 54 - resize by 15%

Paste and position on top of the skull element

Select Element 52 - resize by 30%

Paste and position on the bottom right

Select Element 81 - resize by 20%

Paste and position on the bottom

Select Element 95 - resize by 15%

Paste and position on the bottom

Select Element 15 - resize by 20%

Paste and position in the center of the house element

Select Element 127 - resize by 15%

Image Free Rotate Right by 15% and paste on the top left

Select Element 12 - resize by 30%

Paste and position on the right side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, November 3, 2019

HALLOWEEN MAGIC

5:50 AM | Posted by | Edit Post


Supplies needed:

I am using the stunning artwork from Natalia NZ for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Chachaz Creationz called "Magic Halloween" which you can get by going here

Halloween Mask 1 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 3, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 4 and paste on the canvas

Apply Mask 1 and merge group

Select Element 11 - resize by 65%

Paste and position on the top center of the canvas

Select Element 88 - resize by 55%

Paste and position on top of the tree element

Select Element 53 - resize by 65%

Paste and position on the top left

Select Element 97 - resize by 55%

Paste and position on the right side

Select Element 13 - resize by 45%

Paste and position in the center under tree element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 67 - resize by 40%

Paste and position on the bottom left

Select Element 34 - resize by 25%

Paste and position on the bottom left side

Select Element 10 - resize by 25%

Paste and position on the bottom left

Select Element 72 - resize by 40%

Paste and position on the bottom right of house element

Select Element 58 - resize by 65%

Paste and position on the bottom

Select Element 35 - resize by 20%

Paste and paste on the bottom left

Select Element 30 - resize by 25%

Paste and position on the bottom below tube layer

Select Element 45 - resize by 25%

Paste and position on the bottom

Select Element 51 - resize by 40%

Paste and position on the bottom

Select Element 49 - resize by 30%

Paste and position on the bottom

Select Element 61 - resize by 25%

Paste and position on the bottom right

Select Element 41 - resize by 25%

Paste and position on the door (house element)

Select Element 42 - resize by 20%

Paste and position on the web element

Select Element 63 - resize by 25%

Paste and position on the top left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels: | 0 comments
Subscribe to: Posts (Atom)

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







photo milliespspmadness_zps1b81d2e9.gif