Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Wednesday, December 31, 2014

CALACA




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Calaca" which you can get by going here

Mask 32 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 31, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 38 and paste in the center of the canvas

Resize by 75%

Select your selections tool and select the center portion of the window Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Paste paper 7

Select invert, delete

Add close-up tube of choice on top of paper layer and delete

Select none

Change Close-up to overlay and merge down on paper layer

Move paper below window frame

Select Element 2 - resize by 25%

Paste and position on top left above frame

Select Element 51 - resize by 15%

Paste and position on top of bow element

Select Element 5 - resize by 40%

Paste and position on bottom right

Select Element 58 - resize by 18%

Image Free Rotate Right by 15% and paste on top of chair element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 49 - resize by 35%

Paste and position on right side

Image duplicate and mirror - reposition on left where desired

Select Element 41 - resize by 15%

Paste and position on bottom right

Select Element 55 - resize by 35%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 10 - resize by 15%

Paste and position on bottom right

Select Element 25 - resize by 25%

Paste and position on bottom left

Select Element 21 - resize by 30%

Paste and position on bottom left

Select Element 31 - resize by 30%

Paste and position on bottom left

Select Element 16 - resize by 20%

Paste and position on bottom left

Select Element 40 - resize by 20%

Paste and position on bottom left

Select Element 3 - resize by 20%

Paste and position on bottom left

Select Element 20 - resize by 16%

Paste and position on bottom where desired

Select Element 56 - resize by 90%

Paste and position on center of canvas

Move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 32 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, December 30, 2014

SWEET NEW YEAR



Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Sweet New Year" which you can get by going here

Patriotic Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 78 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of each rectangle frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper below frame

Select Element 85 - resize by 65%

Paste and position on top of paper layer

Select Element 67 - resize by 50%

Paste and position on top left above frame

Select Element 24 - resize by 55%

Paste and position on right side of frame

Select Element 98 - resize by 20%

Paste and position on top right

Erase any excess on the top after you position where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 77 - paste and position on bottom

Select Element 49 - resize by 25%

Paste and position on bottom left

Select Element 61 - resize by 25%

Paste and position on bottom left

Select Element 13 - resize by 55%

Paste and position on bottom left

Select Element 47 - resize by 25%

Paste and position on bottom left

Select Element 48 - resize by 25%

Paste and position on bottom where desired

Select Element 8 - resize by 25%

Paste and position on bottom where desired

Select Element 45 - resize by 40%

Paste and position on bottom

Select Element 2 - resize by 22%

Paste and position on bottom right

Select Element 104 - resize by 22%

Paste and position on bottom right

Select Element 14 - resize by 30%

Paste and position on bottom right

Select Element 103 - resize by 15%

Paste and position on bottom right

Select Element 65 - resize by 80%

Paste and position on top right and move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, December 26, 2014

HATING CHRISTMAS



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kizzed by Kelz called "Hating Christmas" which you can get by going here

Mask 100 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 32 and paste in the center of the canvas

Resize by 90%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper below frame

Select Element 115 - resize by 85%

Paste and position on top of paper layer

Select Element 88 - resize by 85%

Paste and position on top of frame

Select Element 14 - resize by 35%

Paste and position on top of frame

Select Element 13 - resize by 30%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 30%

Paste and position on bottom right

Select Element 2 - resize by 25%

Paste and position on bottom right

Select Element 15 - resize by 15%

Paste and position on bottom right

Select Element 113 - resize by 30%

Paste and position on bottom left

Select Element 10 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 116 - resize by 25%

Paste and position on bottom left

Select Element 44 - resize by 15%

Paste and position on bottom left

Select Element 114 - resize by 25%

Paste and position on bottom left

Paste paper 13 on canvase

Apply Mask 100 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, December 23, 2014

MODERN CHRISTMAS




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags Creations called "Modern Christmas" which you can get by going here

Mask 104 from Millie which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 60%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete

Paste close-up tube on top of paper layer and delete

Select none

Change close-up to screen

Drop opacity on tube down to 90%

Apply dropshadow and merge down on paper layer

Move paper below frame

Select Element 18 - resize by 12%

Paste and position on top of canvas

Apply Mura Meister Copies on the following encircle settings:

Select Element 26 - resize by 45%

Paste and position on right side

Select Element 13 - resize by 15%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 61 - resize by 15%

Paste and position on bottom right

Select Element 40 - resize by 15%

Paste and position on bottom right

Select Element 33 - resize by 15%

Paste and position on bottom right

Select Element 20 - resize by 25%

Paste and position on bottom right

Select Element 7 - resize by 15%

Paste and position on bottom righy

Select Element 37 - resize by 15%

Paste and position on bottom right

Select Element 24 - resize by 15%

Paste and position on bottom right

Select Element 60 - resize by 20%

Paste and position on bottom left

Select Element 62 - resize by 20%

Paste and position on bottom left

Select Element 16 - resize by 13%

Paste and position on bottom left

Select Element 58 - resize by 20%

Paste and position on bottom left

Select Element 59 - resize by 15%

Paste and position on bottom left

Select Element 42 - resize by 12%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 104 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

CELEBRATION




Supplies needed:

I am using the stunning artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Celebration" which you can get by going here

Patriotic Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any
resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on top of paper layer and delete

Select none

Drop opacity on tube down to 70%

Apply dropshadow and merge down on paper layer

Move paper below frame

Select Element 23 - resize by 25%

Paste and position on top left

Select Element 63 - resize by 30%

Paste and position on top right

Select Element 47 - resize by 50%

Paste and position on top right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 49 - resize by 35%

Paste and position on bottom right

Select Element 68 - resize by 22%

Paste and position on bottom right

Select Element 7 - resize by 15%

Paste and position on bottom right

Select Element 16 - resize by 20%

Paste and position on bottom left

Select Element 43 - resize by 25%

Paste and position on bottom left

Select Element 62 - resize by 30%

Paste and position on bottom left

Select Element 20 - resize by 20%

Paste and position on bottom left

Select Element 67 - resize by 25%

Paste and position on bottom left

Select Element 27 - resize by 20%

Paste and position on bottom left

Select Element 24 - resize by 15%

Paste and position on bottom left

Select Element 45 - resize by 25%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

WINTER WONDERLAND




Supplies needed:

I am using the stunning artwork from Wendy Gerber for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Winter Wonderland" which you can get by going here

Mask 251 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 9 and paste in the center of the canvas

Resize by 60%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 14

Select invert, delete, select none

Move paper below frame

Select Element 126 - resize by 26%

Paste and position on top of frame

Select Element 129 - resize by 20%

Paste and position on top left

Image duplicate and mirror

Select Element 180 - resize by 50%

Paste and position on right side

Select Element 64 - resize by 50%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 15%

Paste and position on bottom right

Select Element 60 - resize by 25%

Paste and position on bottom right

Select Element 35 - resize by 30%

Paste and position on bottom right

Select Element 29 - resize by 15%

Paste and position on bottom right

Select Element 141 - resize by 15%

Paste and position on bottom right

Select Element 50 - resize by 12%

Paste and position on bottom right

Select Element 72 - resize by 20%

Image mirror and paste on bottom

Select Element 45 - resize by 15%

Paste and position on bottom

Select Element 82 - resize by 25%

Paste and position on bottom left

Select Element 67 - resize by 20%

Paste and position on bottom left

Select Element 58 - resize by 22%

Paste and position on bottom left

Select Element 71 - resize by 22%

Paste and position on bottom left

Select Element 57 - resize by 20%

Paste and position on bottom left

Select Element 91 - resize by 15%

Paste and position on bottom left

Select Element 5 - resize by 15%

Paste and position on left side

Select Element 145 - resize by 15%

Paste and position on bottom below tube layer

Paste paper 25 on canvas

Apply Mask 251 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, December 18, 2014

CHRISTMAS PUPPIES




Supplies needed:
I am using the stunning artwork from Trinita for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from MMeliCrea Designz called "Christmas Puppies" which you can get by going here

Winter Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).
This tutorial was written by me on December 18, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper below frame

Select Frame Element 7 - resize by 60%

Paste and position on right side

Select your magic wand tool and click in the center of the Frame

(Add (Shift), RGB Value, Tolerance 25, Contiguous checked,

Feather 0)

Selections, Modify, Expand by 2

Add new raster layer and flood-fill each square with color or gradient of choice

Paste close-up tubes on top colored layer where desired

Select invert, delete, Select none

Change tubes to Luminance (Legacy)

Apply dropshadow and merge tubes down on colored layer

Move below frame

Select Element 48 - resize by 15%

Paste and position on top right

Image duplicate and mirror

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 107 - resize by 15%

Paste and position on bottom left

Select Element 61 - resize by 15%

Paste and position on bottom left

Select Element 38 - resize by 15%

Paste and position on bottom left

Select Element 70 - resize by 15%

Paste and position on bottom left

Select Element 55 - resize by 15%

Paste and position on bottom left

Select Element 83 - resize by 15%

Paste and position on bottom

Select Element 3 - resize by 22%

Paste and position on bottom

Select Element 45 - resize by 12%

Paste and position on bottom

Select Element 58 - resize by 15%

Paste and position on bottom right

Select Element 16 - resize by 15%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, December 14, 2014

WINTER BLUES





Supplies needed:
I am using the stunning artwork from Feeline for this tutorial which you can find here

Scrapkit: I am using a beautiful from MellieBeans called "Winter Blues" which you can get by going here

Mask 95 from Millie which you can find here

Plugins: Mura Meister - Copies, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 14, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 12 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame

(Add (Shift), RGB Value, Tolerance 25, Contiguous checked,

Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete

Paste close-up tube on top of paper where desired and delete

Select none

Drop opacity on tube down to 70%

Apply dropshadow and merge down on paper layer

Move paper below frame

Select Element 33 - resize by 25%

Apply Mura Meister on the following encircle settings:

Select Element 1 - resize by 30%

Paste and position on bottom left

Image duplicate, mirror and reposition on top right

Select Element 18 - resize by 60%

Paste and position on bottom of frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 40%

Paste and position on bottom right

Select Element 35 - resize by 15%

Paste and position on bottom right

Select Element 5 - resize by 40%

Image Free Rotate Left by 25% and paste on bottom right

Select Element 34 - resize by 15%

Paste and position on bottom left

Select Element 25 - resize by 25%

Paste and position on bottom left

Select Element 30 - Paste and position on top of canvas where desired

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 95 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 13, 2014

RAVEN




Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Raven" which you can get by going here

Mask 20 from Moonbeams & Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Select Element 61 - paste and position on top of canvas and move below frame layer

Select Element 3 - resize by 30%

Paste and position on top right

Image duplicate, mirror and reposition on bottom left

Select Element 37 - resize by 25%

Paste and position on top right

Select Element 25 - resize by 30%

Paste and position on bottom of frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 34 - resize by 25%

Paste and position on bottom right

Select Element 32 - resize by 22%

Paste and position on bottom right

Select Element 63 - resize by 40%

Paste and position on bottom right

Select Element 57 - resize by 15%

Paste and position on bottom right

Select Element 14 - resize by 30%

Paste and position on bottom

Select Element 60 - resize by 15%

Paste and position on bottom

Select Element 4 - resize by 20%

Image mirror and paste on bottom

Select Element 9 - resize by 20

Paste and position on bottom

Select Element 23 - resize by 30%

Paste and position on bottom

Select Element 26 - resize by 25%

Paste and position on bottom left

Paste paper 5 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, December 11, 2014

GOLDEN GIRL





Supplies needed:

I am using the stunning artwork from Tammy Welt for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags Creations called "Golden Dance" which you can get by going here

Mask 39 from Moonbeams & Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 11, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 31 and paste in the center of the canvas

Resize by 65%

Image Free Rotate Left by 15%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste Close-up tube of choice on paper layer and delete

Drop opacity on tube down to 60% and merge down on paper layer

Move paper below frame

Select Element 68 - resize by 35%

Paste and position on top right above frame

Select Element 24 - resize by 15%

Image Free Rotate Left by 15% and paste on top right

Select Element 23 - resize by 28%

Select Element 29 - resize by 25%

Paste and position on top left

Image Free Rotate Left by 15% and paste on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 26 - resize by 30%

Paste and position on bottom right

Select Element 22 - resize by 35%

Paste and position on bottom right

Select Element 8 - resize by 15%

Paste and position on bottom right

Select Element 11 - resize by 15%

Paste and position on bottom right

Select Element 42 - resize by 15%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 1 - resize by 15%

Paste and position on bottom left

Select Element 72 - resize by 15%

Image mirror and paste on bottom left

Select Element 35 - resize by 25%

Paste and position on bottom

Paste paper 2 on canvas

Apply Mask 39 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, December 8, 2014

WONDER XMAS




Supplies needed:

I am using the stunning artwork from Toriya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Wonder Xmas" which you can get by going here

Mask 85 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 8, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 26 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Select Element 132 - resize by 55%

Paste and position on top of frame layer

Select Element 23 - resize by 30%

Paste and position on top left

Duplicate element 3 more times and position around the frame where desired

Select Element 46 - resize by 35%

Paste on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 2 - resize by 35%

Image mirror and paste on bottom right

Select Element 61 - resize by 30%

Paste and position on bottom right

Select Element 52 - resize by 50%

Paste and position on bottom right

Select Element 89 - resize by 25%

Paste and position on bottom right

Select Element 17 - resize by 30%

Paste and postion on bottom right

Select Element 82 - resize by 20%

Paste and position on bottom right

Select Element 93 - resize by 25%

Image mirror and paste on bottom left

Select Element 71 - resize by 15%

Paste and position on bottom left

Select Element 106 - resize by 22%

Paste and position on bottom left

Select Element 122 - resize by 40%

Paste and position on bottom left

Select Element 77 - resize by 35%

Paste and position on bottom left

Select Element 111 - resize by 25%

Paste and position on bottom left

Select Element 27 - resize by 15%

Paste and position on bottom left

Select Element 40 - resize by 25%

Paste and position on bottom left

Select Element 124 - resize by 90%

Paste and position in the center of canvas and move to bottom layer

Paste paper 4 on canvas

Apply Mask 85 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, December 7, 2014

LOSER




Supplies needed:

I am using the stunning artwork from GraphFreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Whisper in the Wind called "Loser" which you can get by going here

Mask 34 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 7, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Select Element 29 - resize by 75%

Paste and position on top of paper layer and delete

Add Close-up tubes of choice and paste on top of paper layer

Delete, select none

Change close-ups to Luminance (Legacy) and drop opacity down to 90%

Move paper and tubes below frame

Select Element 2 - resize by 20%

Paste and position on top right

Select Element 88 - resize by 25%

Image Free Rotate Left by 15% and paste on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 6 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 33 - resize by 12%

Paste and position on bottom right

Select Element 17 - resize by 20%

Paste and position on bottom right

Select Element 25 - resize by 20%

Paste and position on bottom right

Select Element 73 - resize by 12%

Paste and postion on bottom right

Select Element 19 - resize by 15%

Paste and position on bottom right

Select Element 93 - resize by 20%

Paste and position on bottom below tube layer

Select Element 60 - resize by 10%

Paste and position on bottom

Select Element 20 - resize by 20%

Image Free Rotate Right by 15% and paste on bottom

Select Element 30 - resize by 30%

Paste and position on bottom left

Select Element 5 - resize by 20%

Paste and position on bottom left

Select Element 95 - resize by 15%

Paste and position on bottom left

Select Element 42 - resize by 15%

Paste and position on bottom left

Select Element 45 - resize by 12%

Paste and position on bottom left

Select Element 94 - resize by 15%

Paste and position on bottom left

Paste paper 1 on canvas

Apply Mask 34 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LET IT SNOW




Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Let it Snow" which you can get by going here

Mask 95 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 7, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 15 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete, select none

Move paper below frame

Select Element 158 - resize by 35%

Paste and position on left side above paper layer

Select Frame Element 12 - resize by 60%

Paste and position on 1st frame

Select Element 117 - resize by 45%

Paste and position on top of frame

Select Element 23 - resize by 20%

Paste and position on top left

Select Element 124 - resize by 48%

Paste and position on right side

Select Element 140 - resize by 22%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 143 - resize by 22%

Paste and position on right side

Select Element 44 - resize by 30%

Paste and position on bottom right

Select Element 10 - resize by 25%

Paste and position on bottom right

Select Element 37 - resize by 15%

Paste and position on bottom right

Select Element 33 - resize by 15%

Paste and position on bottom right

Select Element 63 resize by 15%

Paste and position on bottom right

Select Element 38 - resize by 25%

Paste and position on bottom right

Select Element 48 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 107 - resize by 25%

Paste and position on bottom left

Select Element 14 - resize by 25%

Paste and position on bottom left

Select Element 35 - resize by 15%

Paste and position on bottom left

Select Element 64 - resize by 25%

Paste and position on bottom left

Select Element 34 - resize by 15%

Paste and position on bottom left

Select Element 31 - resize by 25%

Paste and position on bottom left

Select Element 18 - resize by 15%

Paste and position on bottom left

Select Element 89 - resize by 15%

Paste and position on bottom

Select Element 7 - resize by 18%

Paste and position on bottom

Select Element 99 - resize by 15%

Paste and position on bottom

Paste paper 19 on canvas

Apply Mask 95 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, November 30, 2014

WARM & RUSTIC




Supplies needed:

I am using the stunning artwork from Trinita for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Pink Paradox Productions called "Warm & Rustic" which you can get by going here

Mask 94 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Move paper below frame

Select Element 58 - resize by 75%

Paste and position on top of frame

Select Element 85 - resize by 15%

Paste and position on top left

Image duplicate and mirror

Select Element 70 - resize by 35%

Paste and position in the center above paper layer

Select Element 56 - resize by 25%

Paste and position on top center above frame

Select Element 119 - resize by 40%

Paste and position on top center

Select Element 32 - resize by 22%

Paste and position on top left

Select Element 112 - resize by 50%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 40 - resize by 25%

Paste and position on bottom left

Select Element 49 - resize by 18%

Paste and position on bottom left

Select Element 28 - resize by 20%

Paste and position on bottom left

Select Element 18 - resize by 15%

Paste and position on bottom left

Select Element 50 - resize by 15%

Paste and position on bottom left

Select Element 27 - resize by 20%

Paste and position on bottom right

Select Element 51 - resize by 25%

Paste and position on bottom right

Select Element 5 - resize by 25%

Paste and position on bottom right

Select Element 9 - resize by 15%

Paste and position on bottom right

Select Element 41 - resize by 20%

Paste and position on bottom right

Select Element 17 - resize by 15%

Paste and position on bottom right

Select Element 38 - resize by 15%

Paste and position on bottom right

Select Element 89 - resize by 15%

Paste and position on bottom right

Paste paper 19 on canvas

Apply Mask 94 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, November 29, 2014

CHRISTMAS ROSE




Supplies needed:

I am using the stunning artwork from Misticheskaya for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from MellieBeans called "Christmas Rose" which you can get by going here

Mask 104 from Millie which you can find here

Plugins: Eyecandy 4000 - Gradient Glow, Mura Meister - Copies, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 7 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper below frame

Select Element 15 - resize by 25%

Paste and position in the center of the canvas

Apply Mura Meister - Copies on the following Encircle settings:

Select Element 30 - resize by 25%

Paste and position on top left

Select Element 24 - resize by 60%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 18 - resize by 25%

Paste and position on bottom right

Select Element 32 - resize by 20%

Paste and position on bottom right

Select Element 10 - resize by 20%

Paste and position on bottom right

Select Element 26 - resize by 15%

Paste and position on bottom right

Select Element 34 - resize by 15%

Paste and position on bottom right

Select Element 29 - resize by 25%

Paste and position on bottom left

Select Element 28 - resize by 25%

Paste and position on bottom left

Select Element 33 - resize by 20%

Paste and position on bottom left

Select Element 11 - resize by 15%

Paste and position on bottom left

Select Element 22 - resize by 35%

Paste and position on bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)


Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 104 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, November 28, 2014

WINTER SHIMMER




Supplies needed:

I am using the stunning artwork from Toriya for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Kissing Kate called "Winter Shimmer " which you can get by going here

Mask 100 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 75%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete, select none

Move paper below frame

Select Frame Element 4 - resize by 90%

Paste and position on top of original frame

Select Element 38 - resize by 65%

Paste and position on right side

Select Element 31 - resize by 15%

Paste and position on top of tree element

Select Element 22 - resize by 20%

Paste and position on left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 63 - resize by 20%

Paste and position on bottom right

Select Element 102 - resize by 30%

Paste and position on bottom right

Select Element 92 - resize by 20%

Paste and position on bottom right

Select Element 36 - resize by 15%

Paste and position on bottom right

Select Element 21 - resize by 22%

Paste and position on bottom right

Select Element 95 - resize by 20%

Paste and position on bottom right

Select Element 85 - resize by 22%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 103 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 25%

Paste and position on bottom left

Select Element 93 - resize by 20%

Paste and position on bottom left

Select Element 59 - resize by 15%

Paste and position on bottom left

Select Element 56 - resize by 20%

Paste and position on bottom left

Select Element 18 - resize by 25%

Paste and position on bottom

Select Element 34 - resize by 25%

Paste and position on bottom

Select Element 76 - resize by 22%

Paste and position on bottom

Select Element 48 - resize by 20%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 100 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, November 27, 2014

QUEEN OF SNOW




Supplies needed:

I am using the stunning artwork from Chris Pastel for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Whisper in the Wind called "Queen of Snow" which you can get by going here

Mask 104 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 27, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete, select none

Move paper below frame

Select Element 46 - resize by 45%

Paste and position on below frame layer

Select Element 32 - resize by 35%

Paste and position on top of frame

Select Element 64 - resize by 30%

Paste and position on top left

Select Element 93 - resize by 20%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 82 - resize by 30%

Paste and position on bottom right

Select Element 42 - resize by 30%

Paste and position on right side

Select Element 61 - resize by 15%

Paste and position on bottom right

Select Element 57 - resize by 15%

Paste and position on bottom right

Select Element 9 - resize by 12%

Paste and position on bottom right

Select Element 8 - resize by 15%

Paste and position on bottom right

Select Element 55 - resize by 12%

Paste and position on bottom right

Select Element 101 - resize by 30%

Paste and position on bottom left

Select Element 62 - resize by 15%

Paste and position on bottom left

Select Element 7 - resize by 15%

Paste and position on bottom left

Select Element 78 - resize by 10%

Paste and position on bottom left

Select Element 5 - resize by 20%

Paste and position on bottom left

Select Element 44 - resize by 15%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 104 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, November 26, 2014

WINTER GARDEN





Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from FwTags called "Winter Garden" which you can get by going here

Winter Mask 10 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame

Select Frame Element 1 - resize by 60%

Paste and position on top of frame layer

Select Element 74 - resize by 30%

Paste and position on top right of frame

Select Element 24 - resize by 50%

Paste and position in the center of canvas below frame layer

Select Element 27 - resize by 40%

Image mirror and paste and position on right side

Select Element 38 - resize by 40%

Paste and position on left side

Select Element 69 - resize by 40%

Select Element 35 - resize by 50%

Paste and position on bottom where desired

Select Element 30 - resize by 30%

Paste and position on bottom right

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 58 - resize by 15%

Paste and position on bottom right

Select Element 81 - resize by 22%

Image mirror - paste and position on bottom right

Select Element 55 - resize by 20%

Paste and position on bottom right

Select Element 31 - resize by 15%

Paste and position on bottom right

Select Element 40 - resize by 12%

Paste and position on bottom

Select Element 75 - resize by 12%

Paste and position on bottom

Select Element 80 - resize by 30%

Paste and position on bottom left

Select Element 22 - resize by 12%

Paste and position on bottom left

Select Element 15 - resize by 15%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 10 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

FALL TRANQUILITY




Supplies needed:

I am using an bonus tube from Picsfordesign for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Scrappin Krazy Designs called "Fall Tranquility" which you can get by going here

Mask 251 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 26, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 54 and paste in the center of the canvas

Select your magic wand tool and click in the center of each side of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 14

Select invert, delete, select none

Move paper below frame

Select Element 77 - resize by 50%

Image Free Rotate Left by 15% and paste on top left

Select Element 68 - resize by 65%

Paste and position on top of frame where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 74 - resize by 65%

Paste and position on bottom right

Select Element 78 - resize by 20%

Paste and position on bottom right

Select Element 93 - resize by 40%

Paste and position on bottom right

Select Element 86 - resize by 40%

Paste and position on bottom right

Select Element 59 - resize by 50%

Paste and position on bottom right

Select Element 79 - resize by 50%

Paste and position on bottom right

Select Element 96 - resize by 52%

Paste and position on bottom left

Select Element 30 - resize by 25%

Paste and position on bottom left

Select Element 67 - resize by 50%

Paste and position on bottom left

Select Element 42 - resize by

Paste and position on bottom left

Select Element 42 - resize by 35%

Paste and position on bottom left

Select Element 49 - resize by 25%

Paste and position on bottom left

Select Element 82 - resize by 20%

Paste and position on bottom left

Paste paper 8 on canvas

Apply Mask 251 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, November 25, 2014

WICKED WONDERLAND





Supplies needed:

I am using the stunning Exclusive artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Wicked Creationz called "Wicked Wonderland" which you can get by going here

Mask 95 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 25, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 36 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper below frame

Select Element 14 - resize by 55%

Paste and position on top of the frame

Select Element 40 - resize by 55%

Paste and position on bottom where desired

Select Element 5 - resize by 65%

Paste and position on left side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 24 - resize by 50%

Paste and position on bottom left

Select Element 29 - resize by 25%

Paste and position on bottom left

Select Element 17 - resize by 30%

Paste and position on bottom left

Select Element 4 - resize by 12%

Image mirror and paste on bottom left

Select Element 28 - resize by 25%

Paste and position on bottom left

Select Element 23 - resize by 65%

Image Free Rotate Right by 20% and paste on bottom right

Select Element 32 - resize by 35%

Image mirror and paste on bottom right

Select Element 10 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 11 - resize by 30%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 95 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SWEET WINTER





Supplies needed:

I am using the stunning artwork from Zlata M for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from MMeliCrea Designz called "Sweet Winter" which you can get by going here

Mask 95 from Millie which you can find here

Plugins: Mura Meister - Copies, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 25, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete, select none

Move paper below frame

Select Element 52 - resize by 20%

Paste and position in the center of the canvas

Apply Mura Meister Copies on the following Encircle settings:

Select Element 16 - resize by 75%

Paste and position on right side

Select Element 47 - resize by 20%

Paste and position on top of tree element

Select Element 45 - resize by 20%

Paste and position on left side

Image duplicate and reposition copy where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 74 - resize by 50%

Paste and position on bottom right

Select Element 80 - resize by 40%

Paste and position on bottom right

Select Element 53 - resize by 22%

Paste and position on bottom right

Select Element 13 - resize by 20%

Image mirror and paste on bottom right

Select Element 62 - resize by 25%

Paste and position on bottom left

Select Element 68 - resize by 20%

Paste and position on bottom left

Select Element 63 - resize by 30%

Paste and position on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 95 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, November 22, 2014

ANNIVERSARIO




Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find in the mega Collabhere

Scrapkit: I am using a beautiful collab kit from Bibi's Collections called "Anniversario" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 48 and paste in the center of the canvas

Resize by 80%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper below frame

Select Element 43 - resize by 65%

Paste and position on top of paper layer

Select Element 46 - resize by 80%

Paste and position on top of frame

Select Element 34 - resize by 30%

Paste and position in the center of canvas

Apply Mura Meister Copies with the following Encircle settings:


Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 76 - resize by 50%

Paste and position on top left

Select Element 69 - resize by 30%

Image mirror - paste and position on top right

Select Element 3 - resize by 20%

Paste and position on bottom left

Select Element 53 - resize by 30%

Image mirror and paste on bottom left

Select Element 87 - resize by 25%

Paste and position on bottom left

Select Element 74 - resize by 25%

Paste and position on bottom left

Select Element 86 - resize by 25%

Paste and position on bottom left

Select Element 6 - resize by 18%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 10 - resize by 22%

Paste and position on bottom right

Select Element 1 - resize by 20%

Paste and position on bottom right

Select Element 40 - resize by 22%

Paste and position on bottom right

Select Element 4 - resize by 35%

Paste and position on bottom right

Paste paper 6 on canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, November 21, 2014

HOLLY DAYS



Supplies needed:

I am using the stunning artwork from Misticheskaya for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Mellie Beans called "Holly Days" which you can get by going here

Winter Mask 10 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 17 and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Move paper below frame

Select Element 8 - resize by 40%

Paste and position on top of paper layer where desired

Select Element 7 - resize by 40%

Paste and position on right side

Select Element 10 - resize by 25%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 30 - resize by 30%

Paste and position on bottom right

Select Element 27 - resize by 25%

Paste and position on bottom right

Select Element 18 - resize by 20%

Paste and position on bottom left

Select Element 28 - resize by 30%

Paste and position on bottom left

Select Element 11 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom left

Paste paper 4 on canvas

Apply Winter Mask 10 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif