I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo SCDblnk_byangelsdesignz.gif
 photo PPPBlinkie2_zps90ae120a.gif
 photo KKfan_byevolangel_zpsyiycjybi.gif

Blog Archive

Facebook

Sunday, May 31, 2015

ZOMBIE TOWN



Supplies needed:

I am using the stunning artwork from Freya Langford-Sidebottom for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Freek's Creations called "Zombie Town" which you can get by going here

Mask 113 from Designz by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 31, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Food Stand Element - resize by 75%

Paste and position in the center of the canvas

Select Splash Element - resize by 50%

Paste and position behind the food stand where desired

Select Tree Element - resize by 40%

Paste and position on the right side below food stand

Select Word Art 2 Element - resize by 35%

Image Free Rotate Left by 15% and paste on top left above food stand element

Select Rubble Element - resize by 65%

Paste and position on bottom of food stand element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Drink Element - resize by 25%

Paste and position in the center above food stand element

Select Garbage Can Element - resize by 40%

Paste and position on bottom left

Select Cat Element - resize by 30%

Paste and position on bottom left

Select Hand Element - resize by 35%

Paste and position on bottom left

Select Bow 2 Element - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Head 2 Element - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Shoe Element - resize by 25%

Paste and position on bottom

Select Cupcake Element- resize by 20%

Paste and position on the bottom

Select Flower 2 Element - resize by 20%

Paste and position on bottom

Select Finger Element - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom

Select Milkshake Element - resize by 25%

Paste and position on bottom

Paste paper 9 on canvas

Apply Mask 113 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, May 30, 2015

SUNNY



Supplies needed:

I am using the stunning artwork from ViNina for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags called "Sunny" which you can get by going here

Mask 1 from Kissing Kate which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 30, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 5 Element - resize by 65%

Paste and position in the center of the canvas and move up about an inch

Select your magic wand tool and click in the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice

Paste and position any close-up tube of choice on color/gradient layer

Select invert, delete, select none

Change the close-ups to Hard Light or Luminance (Legacy) and merge down on color layer

Move color layer below frame layer

Select Element 45 - resize by 55%

Paste and position on top where desired

Select Element 27 - resize by 25%

Paste and position on top right

Select Element 20 - resize by 20%

Paste and position on left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 14 - resize by 22%

Paste and position on bottom right

Select Element 18 - resize by 15%

Paste and position on bottom right

Select Element 56 - resize by 15%

Paste and position on bottom right

Select Element 1 - resize by 20%

Paste and position on bottom right

Select Element 16 - resize by 8%

Paste and position on bottom right

Select Element 36 - resize by 8%

Paste and position on bottom right

Select Element 9 - resize by 15%

Paste and position on bottom right

Select Element 3 - resize by 30%

Paste and position on the bottom

Select Element 24 - resize by 15%

Paste and position on bottom

Select Element 31 - resize by 20%

Paste and position on bottom left

Select Element 58 - resize by 12%

Paste and position on bottom left

Select Element 10 - resize by 15%

Paste and position on bottom left

Select Element 4 - resize by 12%

Paste and position on bottom left

Select Element 59 - resize by 15%

Paste and position on bottom left

Select Element 21 - resize by 15%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, May 29, 2015

BEARY BLUE




Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Beary Blue" which you can get by going here

Mask 12 from Gina Gem which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 29, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Wire Element - resize by 90%

Paste and position in the center of the canvas

Select Frame 1 Element - Paste and position in the center of the canvas

Select your magic wand tool and click in the center of the Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 12

Select invert, delete, select none

Move paper below frame layer

Select Moon Element - resize by 40%

Paste and position on top left

Select Greenery 2 Element - resize by 30%

Paste and position on top left

Select Butterfly 2 Element - resize by 55%

Paste and position on top left

Select Sign Element - resize by 36%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Bin Element - resize by 55%

Paste and position on bottom left

Select Paws Element - resize by 35%

Image mirror and paste on bottom left

Select Bear Ears Element - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Skull Element - resize by 65%

Paste and position on bottom left

Select Jewel Element - resize by 50%

Paste and position on bottom left

Select Shoe Element - resize by 45%

Paste and position on bottom left

Select Box Element - resize by 40%

Image mirror and paste on the bottom

Select Flower 3 Element - resize by 25%

Paste and position on the bottom

Select Bracelet 2 Element - resize by 50%

Paste and position on bottom right

Select Bear 2 Element - resize by 35%

Paste and position on bottom right

Select Flair Element - resize by 45%

Image Free Rotate Left by 15% and paste on bottom right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 12 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, May 28, 2015

BLUE MASQUERADE


Supplies needed:

I am using the stunning artwork from Jasmine Becket-Griffith for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Blue Masquerade" which you can get by going here or here

Mask 22 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 28, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select NodeOverlay Element - resize by 60%

Paste and position in the center of the canvas

Select Frame 1 Element - resize by 75%

Paste and position on top right

Image duplicate and reposition copy on bottom left

Select your magic wand tool and click in the center of top right frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper below frame layer

Repeat steps for the bottom left frame

Select Screen Element - paste and position in the center of the canvas above frames

Select Hearts Element - resize by 45%

Paste and position on top left side

Select Owl Element - resize by 40%

Paste and position on the left side

Select Butterfly Element - resize by 65%

Image Free Rotate Right by 15% and paste on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Hatbox Element - resize by 40%

Paste and position on bottom right

Select Box Element - resize by 30%

Paste and position on bottom right

Select Watch Element - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Key Element - resize by 45%

Paste and position on bottom right

Select Film Element - resize by 25%

Image mirror and paste on bottom right

Select Broche Element - resize by 45%

Paste and position on bottom right

Select Clock Element - resize by 50%

Image Free Rotate Left by 15% and paste on bottom left

Select Books Element - resize by 45%

Paste and position on bottom left

Select Hat Element - resize by 25%

Paste and position on bottom left

Select Mask Element - resize by 30%

Paste and position on bottom left

Select Leaf 3 Element - resize by 20%

Image mirror and paste on bottom left

Select Flower 8 Element - resize by 25%

Paste and position on bottom left

Select Boots 2 Element - resize by 40%

Paste and position on bottom

Select Chest Element - resize by 22%

Paste and position on bottom

Select Flower 10 Element - resize by 40%

Paste and position on bottom

Paste paper 8 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, May 27, 2015

STAR NATIVE




Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Star Native" which you can get by going here

Mask 4 from Butterfly Flutterby which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 27, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 8 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center of the Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper below element layer

Select Element 23 - resize by 30%

Image flip and paste/postion on top left

Image duplicate and mirror

Select Element 7 - resize by 30%

Image Free Rotate Right by 15% and paste on top right

Select Element 12 - resize by 30%

Paste and position on top right side

Select Element 71 - resize by 40%

Paste and position on the right side

Select Element 44 - resize by 30%

Paste and position on the bottom right

Select Element 41 - resize by 40%

Paste and position in the center towards the bottom

Select Element 66 - resize by 40%

Paste and position on bottom above tent element

Select Element 14 - resize by 25%

Image Free Rotate Left by 15% and paste next to wolf element

Select Element 82 - resize by 35%

Paste and position on bottom left

Select Element 63 - resize by 22%

Paste and position on bottom left

Select Element 70 - resize by 30%

Paste and position on bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 13 - resize by 20%

Paste and position on bottom right

Select Element 33 - resize by 15%

Paste and position on bottom right

Select Element 60 - resize by 45%

Paste and position on bottom right

Select Element 36 - resize by 15%

Paste and position on bottom right

Select Element 10 - resize by 25%

Paste and position on bottom right

Select Element 61 - resize by 30%

Paste and position on bottom right

Select Element 57 - resize by 30%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, May 25, 2015

NIGHT WOMAN


Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Whisper in the Wind called "Night Woman" which you can get by going here

Mask 56 from Weescotlass which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 25, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 39 - resize by 75%

Paste and position in the center of the canvas

Select Element 36 - resize by 25%

Paste and position on right side below element 39

Select Element 70 - resize by 25%

Paste and position on top left side

Select Element 80 - resize by 55%

Paste and position in the center of the canvas where desired

Select Element 81 - resize by 30%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 40%

Paste and position on bottom left

Select Element 41 - resize by 22%

Paste and position on bottom left

Select Element 52 - resize by 22%

Paste and position on bottom left

Select Element 22 - resize by 12%

Paste and position on bottom left

Select Element 66 - resize by 15%

Paste and position on bottom left

Select Element 32 - resize by 10%

Image Free Rotate Left by 15% and past on bottom left

Select Element 4 - resize by 15%

Paste and position on bottom left

Select Element 33 - resize by 20%

Paste and position on bottom

Select Element 44 - resize by 12%

Paste and position on bottom

Select Element 51 - resize by 25%

Paste and position on bottom

Select Element 12 - resize by 15%

Paste and position on bottom

Select Element 67 - resize by 18%

Paste and position on bottom

Select Element 37 - resize by 15%

Paste and position on bottom right

Select Element 43 - resize by 15%

Paste and position on bottom right

Paste paper 3 on canvas

Apply Mask 56 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 24, 2015

TATTOO GIRL



Supplies needed:

I am using the stunning artwork from Hired Guns for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Creative Scraps by Crys called "Ink Masterz" which you can get by going here

Circle Mask 2 from Tonya which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 24, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 16

Select invert, delete

Paste a close-up tube of choice on paper layer and delete

Change close-up to Luminance (Legacy)

Select none and apply dropshadow

Merge tube down on paper layer

Move paper below frame layer

Select Element 61 - resize by 40%

Paste and position on the top of the frame

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element 5 - resize by 30%

Image Free Rotate Left by 15% and paste on top left

Select Element 17 - resize by 40%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 40%

Paste and position on left side

Select Element 24 - resize by 20%

Paste and position on bottom left

Select Element 10 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 39 - resize by 25%

Paste and position on bottom left

Select Element 16 - resize by 20%

Paste and position on bottom left

Select Element 22 - resize by 35%

Paste and position on bottom left

Select Element 34 - resize by 15%

Paste and position on bottom

Select Element 33 - resize by 15%

Paste and position on bottom

Select Element 7 - resize by 18%

Paste and position on bottom

Select Element 28 - resize by 30%

Paste and position on bottom

Select Element 18 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom

Paste paper 5 on canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, May 23, 2015

ORANGE SHERBERT



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Chili Designz called "Orange Summer" which you can get by going here

Shell Mask from Jenny which you can on the Misfits Blog here

Plugins: Lokas 3D Shadow, Mura Meister - Copies, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - paste and position in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste a close-up tube of choice on paper layer and delete

Change close-up to Luminance (Legacy) and reduce opacity to 65%

Select none and apply dropshadow

Merge tube down on paper layer

Move paper below frame layer

Select Frame 9 Element - paste and position above frame 1

Select Flower 10 Element - resize by 25%

Paste and position in the center of the canvas

Apply Mura Meister - Copies with the following settings:

Select WA 2 Element - resize by 50%

Paste and position on the top where desird

Apply Eyecandy - Gradient Glow on fat default settings (Glow Width 3)

Select Butterfly 2 Element - resize by 55%

Paste and position on top left

Select Charm Element - resize by 65%

Paste and position on left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Chair Element - resize by 50%

Image mirror and paste on bottom right below tube

Select WA Love Element - resize by 35%

Paste and position on right side above chair element

Select Water Element - resize by 30%

Paste and position on bottom below tube layer

Select Hat Element - resize by 32%

Image Free Rotate Right by 15% and paste on right side above chair element

Select Puppy Element - resize by 45%

Paste and position on bottom right

Select Ball Element - resize by 75%

Paste and position on bottom left

Select Sunlotion Element - resize by 55%

Paste and position on bottom left

Select Watermelon Element - resize by 45%

Paste and position on bottom left

Select Flipflops Element - resize by 35%

Paste and position on bottom left

Select Flower 8 Element - resize by 30%

Paste and position on bottom left

Select Drink Element - resize by 45%

Paste and position on bottom left

Select Orange Element - resize by 40%

Paste and position on bottom

Select Pineapple 2 Element - resize by 40%

Paste and position on bottom

Select Sunglasses Element - resize by 45%

Image Free Rotate Left by 15% and paste on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 126 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

LEMON AND GINGER



Supplies needed:

I am using the stunning artwork from Ellie Milk for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Lemon and Ginger" which you can get by going here or here

Mask 35 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 23, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper below frame layer

Select Element 69 - resize by 20%

Paste and position in the center of the canvas

Apply Mura Meister - Copies with the following settings:

Select Element 16 - resize by 18%

Paste and position in the center of the canvas

Apply Mura Meister - Copies with the following settings:

Select Element 68 - resize by 20%

Image Free Rotate Right by 15% and paste on top right

Select Element 59 - resize by 30%

Paste and position on left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 66 - resize by 65%

Paste and position on bottom above tube

Select Element 60 - resize by 25%

Paste and position on bottom right

Select Element 18 - resize by 30%

Paste and position on bottom right

Select Element 64 - resize by 22%

Paste and position on bottom right

Select Element 3 - resize by 20%

Paste and position on bottom right

Select Element 40 - resize by 22%

Paste and position on bottom right

Select Element 36 - resize by 20%

Paste and position on bottom left

Select Element 32 - resize by 12%

Paste and position on bottom left

Select Element 25 - resize by 15%

Paste and position on bottom left

Select Element 37 - resize by 25%

Paste and position on bottom left

Select Element 14 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 5 - resize by 25%

Paste and position on bottom

Select Element 28 - resize by 20%

Paste and position on bottom

Select Element 20 - resize by 18%

Paste and position on bottom

Select Element 17 - resize by 30%

Paste and position on bottom

Select Element 39 - resize by 15%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 35 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, May 22, 2015

STEAMPUNK AMY



Supplies needed:

I am using the stunning artwork from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Amy Steampunk" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 22, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 110 - resize by 45%

Paste and position in the center of the canvas

Select Element 3 - resize by 75%

Paste and position on the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper below frame layer

Select Element 22 - resize by 65%

Paste and position on canvas above frame

Select Element 11- resize by 65%

Paste and position on

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 49 - resize by 25%

Paste and position on bottom right below tube layer

Select Element 66 - resize by 25%

Paste and position on right side

Select Element 30 - resize by 30%

Paste and postion on bottom right

Select Element 61 - resize by 15%

Paste and position on bottom right

Select Element 55 - resize by 25%

Paste and position on bottom right

Select Element 87 - resize by 25%

Paste and position on bottom left

Select Element 85 - resize by 40%

Paste and position on left side

Select Element 27 - resize by 40%

Paste and position on bottom left

Select Element 76 - resize by 25%

Paste and position on bottom left

Select Element 23 - resize by 25%

Paste and position on bottom left

Select Element 88 - resize by 25%

Paste and position on bottom

Select Element 86 - resize by 14%

Paste and position on bottom

Select Element 71 - resize by 25%

Image mirror and paste on bottom

Select Element - resize by 15%

Paste and position on bottom right

Select Element 9 - resize by 35%

Image Free Rotate Right by 15% and paste right side

Select Element 34 - resize by 15%

Paste and position on top right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 126 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, May 21, 2015

TWEETY



Supplies needed:

I am using the stunning artwork from Pandora Creations for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Tweety" which you can get by going here

Mask 5 from Melissaz Creations which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 21, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 55 - resize by 55%

Paste and position in the center of the canvas

Select Frame Element 2 - resize by 85%

Select Element 16 - resize by 45%

Paste and position in the center of the frame element

Paste and position in the center of the canvas

Select Element 15 - resize by 50%

Paste and position in the center of the canvas below frame layer

Select Element 79 - paste and position in the center above frame layer

Select Element 21 - resize by 30%

Past and position in the center of the canvas

Apply Mura Meister - Copies with the following settings:

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 8 - resize by 40%

Paste and position on top left

Select Element 59 - resize by 40%

Paste and position on top right

Select Element 35 - resize by 35%

Paste and postion on bottom left

Select Element 82 - resize by 20%

Paste and position on bottom left

Select Element 13 - resize by 12%

Paste and position on bottom left

Select Element 80 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 74 - resize by 25%

Paste and position on bottom right

Select Element 1 - resize by 55%

Paste and position on bottom

Select Element 14 - resize by 35%

Paste and position on bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 5 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, May 20, 2015

WACKY HAT



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags Creations called "Wacky Hat" which you can get by going here

Mask 126 from Trese which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 20, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 1 - resize by 45%

Paste and position in the center of the canvas and move to the top

Select Element 21 - resize by 45%

Paste and position on canvase and move towards the bottom above castle element

Select Element 10 - resize by 20%

Image Free Rotate Right by 15% and paste on top left below castle element

Select Element 24 - resize by 55%

Paste and position on right side below castle element

Select Element 36 - resize by 22%

Paste and position on top right

Select Element 83 - resize by 45%

Paste and position on top right

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 22 - resize by 65%

Paste and position on botton below bridge element

Select Element 4 - resize by 35%

Paste and position on bottom left below bridge element

Select Element 20 - resize by 40%

Paste and position on bottom left above bridge element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 80 - resize by 15%

Paste and position on bottom left

Select Element 93 - resize by 15%

Paste and position on bottom left

Select Element 7 - resize by 15%

Paste and postion on bottom left

Select Element 76 - resize by 8%

Paste and position on bottom left

Select Element 89 - resize by 10%

Paste and position on bottom left

Select Element 26 - resize by 12%

Paste and position on bottom left

Select Element 87 - resize by 12%

Paste and position on bottom

Select Element 5 - resize by 15%

Paste and position on bottom

Select Element 52 - resize by 20%

Paste and position on bottom

Select Element 43 - resize by 25%

Paste and position on bottom right

Select Element 32 - resize by 10%

Paste and position on bottom right above mushroom element

Select Element 8 - resize by 12%

Paste and position on bottom right

Select Element 11 - resize by 20%

Image mirror and paste on bottom right

Select Element 19 - resize by 15%

Paste and position on bottom right

Select Element 9 - resize by 35%

Image Free Rotate Right by 15% and paste right side

Select Element 34 - resize by 15%

Paste and position on top right

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 126 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Tuesday, May 19, 2015

UNSPOKEN




Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Devilish Dezines called "The Unspoken" which you can get by going here

Mask 32 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 19, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 33 - resize by 80%

Paste and position in the center of the canvas

Select Element 41 - resize by 40%

Paste and position on top right where desired

Select Element 22 - resize by 65%

Paste and position on right side

Select Element 1 - resize by 20%

Image Free Rotate Right by 15% and paste on top right

Select Element 45 - resize by 25%

Paste and position on right side

Select Element 7 - resize by 50%

Paste and position on bottom above frame

Select Element 31 - resize by 22%

Paste and position on top left

Select Element 42 - resize by 35%

Paste and position on top left

Select Element 21 - resize by 30%

Paste and position on left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 30%

Paste and position on bottom left

Select Element 5 - resize by 12%

Paste and position on bottom right

Select Element 17 - resize by 12%

Paste and postion on bottom left

Select Element 48 - resize by 50%

Paste and position on bottom left

Select Element 50 - resize by 20%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 46 - resize by 15%

Paste and position on bottom right

Select Element 37 - resize by 20%

Paste and position on bottom right

Paste paper 3 on canvas

Apply Mask 32 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ETERNAL YEARNING




Supplies needed:

I am using the stunning artwork from Verymany for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Eternal Yearning" which you can get by going here

Mask 22 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 19, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 124 - resize by 65%

Paste and position in the center of the canvas

Select Element 117 - resize by 13%

Paste and position on top where desired

Select Element 19 - resize by 17%

Paste and position on top left where desired

Select Element 132 - resize by 25%

Paste and position on top where desired

Select Element 28 - resize by 22%

Paste and position on top left

Select Element 69 - resize by 12%

Paste and position on left side

Select Element 128 - resize by 25%

Paste and position on top

Select Element 13 - resize by 15%

Paste and position on top

Select Element 8 - resize by 20%

Image Free Rotate Right by 15% and paste on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 139 - resize by 25%

Paste and position on bottom right below tube

Select Element 61 - resize by 12%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 47 - resize by 15%

Paste and position on bottom right

Select Element 154 - resize by 12%

Paste and position on bottom right

Select Element 17 - resize by 20%

Paste and postion on left side

Select Element 40 - resize by 12%

Paste and position on bottom left

Select Element 43 - resize by 20%

Paste and position on bottom left

Select Element 59 - resize by 18%

Paste and position on bottom left

Select Element 38 - resize by 10%

Image mirror and paste and position on bottom left

Select Element 102 - resize by 25%

Paste and position on bottom left

Select Element 4 - resize by 18%

Paste and position on bottom left

Select Element 44 - resize by 15%

Paste and position on bottom

Select Element 25 - resize by 15%

Paste and position on bottom

Select Element 1 - resize by 15%

Paste and position on bottom

Select Element 49 - resize by 10%

Paste and position on bottom

Select Element 34 - resize by 15%

Paste and position on bottom

Select Element 36 - resize by 12%

Paste and position on bottom

Paste paper 43 on canvas

Apply Mask 22 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, May 17, 2015

DARK NURSE



Supplies needed:

I am using the stunning artwork from Alfadesire for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Dark Nurse" which you can get by going here

Mask 179 from Insatiable Dreams which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 77 - resize by 75%

Paste and position in the center of the canvas

Select Element 26 - resize by 35%

Paste and position on top where desired

Select Element 67 - resize by 45%

Paste and position on top where desired

Select Element 59 - resize by 20%

Paste and position on top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 61 - resize by 40%

Paste and position on right side

Select Element 19 - resize by 35%

Paste and position on bottom right

Select Element 51 - resize by 25%

Paste and position on bottom right

Select Element 56 - resize by 20%

Paste and postion on bottom right

Select Element 14 - resize by 25%

Paste and position on bottom right

Select Element 16 - resize by 15%

Paste and position on bottom right

Select Element 11 - resize by 40%

Paste and position on bottom left

Select Element 52 - resize by 25%

Paste and position on bottom left

Select Element 10 - resize by 30%

Paste and position on bottom left

Select Element 12 - resize by 30%

Paste and position on bottom left

Select Element 20 - resize by 40%

Paste and position on bottom left

Select Element 55 - resize by 25%

Paste and position on bottom

Select Element 68 - resize by 25%

Paste and position on bottom left

Select Element 7 - resize by 20%

Paste and position on bottom

Paste paper 9 on canvas

Apply Mask 179 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

STREET ZONE




Supplies needed:

I am using the stunning artwork from Carpe Diem for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Street Zone" which you can get by going here

Mask 5 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 17, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Building Element - resize by 85%

Paste and position on left side

Select Stillads Element - resize by 55%

Paste and position on right side

Select Mesh Element - resize by 70%

Paste and position on right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Car Element - resize by 40%

Paste and position on bottom right side

Select Sign 4 Element - resize by 40%

Paste and position on bottom right

Select Bottle 2 Element - resize by 40%

Paste and position on bottom right

Select Boot Element - resize by 30%

Paste and postion on bottom right

Select Yarn Element - resize by 18%

Paste and position on bottom right

Select Deco 2 Element - resize by 30%

Paste and position on bottom right below car element

Select Tires Element - resize by 30%

Paste and position on bottom

Select Dog Element - resize by 50%

Paste and position on bottom

Select Watch Element - resize by 40%

Paste and position on bottom

Select Screw Element - resize by 65%

Paste and position on bottom

Select Phonebox Element - resize by 25%

Paste and position on bottom left

Select Garbage Element - resize by 30%

Paste and position on bottom left

Select Can Element - resize by 30%

Paste and position on bottom left

Select Graffiti Element - resize by 25%

Paste and position on building element where desired

Select Graffiti 3 Element - resize by 25%

Paste and position on building element where desired

Paste paper 4 on canvas

Apply Mask 5 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

GIRLY GLAM



Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from MMeliCrea Designz called "Little Emo Glam" which you can get by going here

Heart Mask 43 from Chas which you can find in the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 16, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 75%

Image Free Rotate Right by 15% and paste in the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 3)

Select invert, delete

Paste close-up tube of choice on top of paper layer and delete

Select none

Change close-up to Luminance (Legacy)

Drop opacity down to 75%

Apply dropshadow and merge close-up down on gradient

Effect, Texture Effects, Blinds (Width 3, Opactity 20, Horizontal and Light from left/top checked)

Move paper below frame

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 37 - resize by 25%

Paste and position on right side

Select Element 14 - resize by 20%

Paste and position on bottom right

Select Element 40 - resize by 18%

Paste and position on bottom right

Select Element 75 - resize by 15%

Paste and postion on bottom right

Select Element 26 - resize by 20%

Paste and position on bottom left

Select Element 60 - resize by 20%

Paste and position on bottom left

Select Element 56 - resize by 20%

Paste and position on bottom left

Select Element 2 - resize by 20%

Paste and position on bottom

Select Element 87 - resize by 12%

Paste and position on bottom

Add new raster layer and flood-fill with color of choice

Apply Mask 43 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, May 15, 2015

CANDY COTTAGE




Supplies needed:

Scrapkit: I am using a beautiful kit from Creative Scraps by Crys called "Cottage of Candy" which you can get by going here

Mask 34 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 15, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 2 - paste and position in the center of the canvas

Select Element 36 - resize by 50%

Paste and position on the top of the canvas

Apply dropshadow

Select Element 3 - resize by 20%

Paste and position on top left

Select Element 46 - resize by 55%

Paste and position on top right

Select Element 17 - resize by 12%

Paste and position on bottom right

Select Element 37 - resize by 40%

Paste and position on bottom right

Select Element 1 - resize by 40%

Paste and position on bottom right

Select Element 19 - resize by 15%

Paste and position on bottom

Select Element 42 - resize by 25%

Paste and postion on bottom

Select Element 13 - resize by 15%

Paste and position on bottom left

Select Element 16 - resize by 25%

Paste and position on bottom left

Select Element 34 - resize by 25%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 34 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, May 13, 2015

LOVE OF MIME




Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Mime" which you can get by going here

Mask M4 from Kylie which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 13, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 33 - resize by 70%

Paste and position in the center of the canvas

Select Element 23 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom left

Select your magic wand tool and click in the center squares of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9 on top

Select invert, delete

Paste close-up tubes of choice on top of paper layer and delete

Select none

Change close-ups to Luminance (Legacy)

Apply dropshadow and merge close-ups down on paper layer

Move paper below frame

Select Element 44- resize by 20%

Paste and position on the bottom left side

Select Element 85 - resize by 75%

Paste and position on bottom where desired

Select Element 6 - resize by 35%

Image Free Rotate Right by 15% and paste on top right

Select Element 65 - resize by 30%

Paste and position on top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 30%

Paste and position on bottom below tube layer

Select Element 19 - resize by 35%

Paste and position on bottom left

Select Element 37 - resize by 15%

Paste and position on bottom left

Select Element 11 - resize by 35%

Image mirror and paste on left side

Select Element 67 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom

Select Element 12 - resize by 22%

Image mirror and paste on bottom

Select Element 2 - resize by 30%

Image Free Rotate Right by 15% and paste on bottom

Select Element 64 - resize by 25%

Paste and position on right side

Select Element 21 - resize by 20%

Paste and position on bottom right

Select Element 26 - resize by 25%

Paste and position on bottom right

Select Element 60 - resize by 40%

Paste and position on bottom right

Select Element 17 - resize by 20%

Paste and position on bottom right

Select Element 69 - resize by 55%

Paste and position on top left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask M4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, May 12, 2015

BRAINS ALA CARTE



Supplies needed:

I am using the stunning artwork from Charles Bristow for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Bibi's Collections called "Brains Ala Carte" which you can get by going here

Mask 5 from Beth Ann which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 8, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 14 - resize by 55%

Paste and position in the center of the canvas

Select Element 63 - resize by 55%

Paste and position on the top of element 14

Select Element 24 - resize by 50%

Paste and position on the bottom right side

Select Element 61 - resize by 30%

Paste and position on the left hand side

Select Element 32 - resize by 40%

Paste and position on bottom left

Select Element 41 - resize by 45%

Paste and position on bottom where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 56 - resize by 22%

Paste and position on bottom left

Select Element 48 - resize by 22%

Paste and position on bottom left

Select Element 33 - resize by 30%

Paste and position on bottom left

Select Element 26 - resize by 65%

Paste and postion on bottom left

Select Element 57 - resize by 22%

Paste and position on bottom right

Select Element 30 - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 77 - resize by 20%

Paste and position on bottom right

Select Element 29 - resize by 22%

Paste and position on bottom right

Select Element 65 - resize by 35%

Paste and position on bottom

Select Element 38 - resize by 20%

Paste and position on bottom

Select Element 68 - resize by 25%

Paste and position on bottom

Select Element 34 - resize by 35%

Paste and position on bottom

Select Element 39 - resize by 30%

Image Free Rotate Left by 15% and paste on top right

Paste paper 3 on canvas

Apply Mask 5 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SHABBY STEAMPUNK



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Shabby Steampunk" which you can get by going here

Mask 121 from Bitzy Beez Designz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 12, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 6 Element - paste and position on the center of the canvas

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 3)

Select invert, delete

Paste close-up tubes of choice on top of paper layer and delete

Select none

Change close-up to Luminance (Legacy) 

Apply dropshadow and merge close-up down on gradient

Move paper below frame

Select Coqdeco Element - resize by 40%

Paste and position on top lefte where desired

Select WA Element - resize by 40%

Image Free Rotate Left by 15% and paste on top left

Apply Eyecandy 4000 - Gradient Glow on fat default settings (Glow Width 3)

Select Staircase Element - resize by 55%

Image mirror and paste on right side

Select Butterfly 2 Element - resize by 40%

Paste and position on right side

Select Leaves 4 Element - resize by 25%

Paste and position on bottom right

Select Heart 3 Element - resize by 20%

Image Free Rotate Right by 15% and paste on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Flower4 Element - resize by 25%

Paste and position on bottom right

Select Coq Element - resize by 40%

Paste and position on bottom left

Select Jewel 7 Element - resize by 40%

Paste and position on bottom left

Select Glass Element - resize by 25%

Paste and postion on bottom left

Select Boots Element - resize by 65%

Paste and position on bottom left

Select Hat Element - resize by 40%

Paste and position on bottom left

Select Bow Element - resize by 30%

Paste and position on bottom

Select Charm Element - resize by 40

Paste and position on bottom

Select Glasses Element - resize by 40%

Paste and position on bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 121 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, May 11, 2015

COUNTRY LOVE



Supplies needed:

I am using the stunning artwork from Arthur Crowe for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Scrappin Krazy Designs called "Country Love" which you can get by going here

Mask 21 from Gina Gems which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 11, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 79 - Paste and position on the center of canvas

Select Element 90 - resize by 75%

Paste and position on left side where desired

Select Element 52- resize by 90%

Paste and position on bottom where desired

Select Element 41 - resize by 90%

Paste and position on bottom right

Select Element 6 - resize by 40%

Paste and position on bottom right

Select Element 18 - resize by 30%

Paste and position on bottom right

Select Element 22 - resize by 25%

Paste and position on bottom right

Select Element 37 - resize by 25%

Paste and position on bottom right

Select Element 61 - resize by 20%

Paste and position on bottom right

Select Element 31 - resize by 25%

Paste and position on bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 17 - resize by 30%

Paste and position on bottom left

Select Element 77 - resize by 30%

Paste and position on bottom left

Select Element 87 - resize by 35%

Paste and position on bottom left

Select Element 80 - resize by 32%

Paste and postion on bottom left

Select Element 36 - resize by 40%

Paste and position on the top where desired

Select Element 12- resize by 20%

Paste and position on the top right

Paste paper 4 on canvas

Apply Mask 21 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, May 8, 2015

UNDERCOVER NINJA



Supplies needed:

I am using the stunning artwork from Kajenna for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Pink Paradox Productions called "Undercover Ninja" which you can get by going here

Mask 11 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 8, 2014. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 96 - resize by 40%

Paste and position on the left side of the canvas

Select Element 84 - resize by 48%

Paste and position on right side where desired

Select Element 86 - resize by 55%

Paste and position on left side

Select Element 99 - resize by 25%

Paste and position on bottom right

Select Element 79 - resize by 25%

Paste and position on top left

Select Element 17 - resize by 20%

Paste and position on top of bridge element

Select Element 30 - resize by 30%

Paste and position on bridge element where desired

Select Element 11 - resize by 20%

Image Free Rotate Right by 15% and paste on left side

Select Element 106 - resize by 40%

Paste and position on bottom left

Select Element 104 - resize by 30%

Paste and position on bottom left below pond element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 20%

Paste and position on bottom right

Select Element 44 - resize by 15%

Paste and position on bottom right

Select Element 39 - resize by 12%

Paste and position on bottom right

Select Element 46 - resize by 20%

Paste and postion on bottom right

Select Element 50 - resize by 15%

Paste and position on bottom right

Select Element 47- resize by 25%

Paste and position on bottom right

Select Element 53 - resize by 12%

Paste and position on bottom right

Select Element 52 - resize by 15%

Paste and position on bottom right

Select Element 118 - resize by 12%

Paste and position on bottom left

Select Element 33 - resize by 12%

Paste and position on bottom left

Select Element 2 - resize by 25%

Paste and position on bottom left above pone element

Select Element 105 - resize by 25%

Paste and position on bottom on top of pond element

Select Element 133 - resize by 15%

Paste and position on the bottom of bridge element

Select Element 23 - resize by 25%

Image Free Rotate left by 15% and paste on bottom of bridge element

Select Element 65 - resize by 10%

Paste and position on bottom

Select Element 18 - resize by 12%

Paste and position on bottom

Select Element 119 - resize by 12%

Paste and position on bottom

Select Element 76 - resize by 15%

Image mirror and paste on bottom

Select Element 8 - resize by 20%

Paste and position on bottom

Select Element 35 - resize by 10%

Paste and position on bottom

Paste paper 23 on canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif