Labels

I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo Blinkie_zpskfauhjhh.gif
WD

Blog Archive

Facebook

Friday, September 15, 2017

STEAMPUNK BONES









These Extra's were made using the amazing artwork by Julia Fox and stunning kit by Designz by Sue  called "Steampunk Bones 3". You can purchase the kit here and the tube here
These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Tuesday, September 12, 2017

COTTON CANDY FUN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FW Tags called "Candy Fun Fair" which you can get by going here

Mask 11 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 12, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 4 - resize by 55%

Paste and position on the left side of the canvas

Select Element 39 - resize by 65%

Paste and position on the right side

Select Frame Element 6 - resize by 65%

Paste and position on the right side

Select your magic wand tool and select the center of each frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tubes on paper layer and delete

Select none

Chage the closeups to Hard Light and Luminance

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 54 - resize by 85%

Paste and position on the bottom

Select Element 14 - resize by 45%

Paste and position on the top right below frame

Select Element 13 - resize by 40%

Paste and position on the top right

Select Element 55 - resize by 30%

Paste and position on the left side

Select Element 1 - resize by 40%

Paste and position on the bottom left

Select Element 24 - resize by 20%

Paste and position on the bottom left

Select Element 28 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 20%

Paste and position on the right side

Select Element 31 - resize by 30%

Paste and position on the right side

Select Element 48 - resize by 20%

Paste and position on the bottom right

Select Element 46 - resize by 20%

Paste and position on the bottom right

Select Element 51 - resize by 12%

Paste and paste on the bottom right

Select Element 52 - resize by 15%

Paste and position on the bottom

Select Element 22 - resize by 20%

Paste and position on the bottom

Select Element 17 - resize by 25%

Paste and position on the bottom

Select Element 19 - resize by 20%

Paste and position on the bottom

Select Element 45 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom below tube layer

Select Element 18 - resize by 65%

Paste and position on the canvas where desired

Paste paper 4 on the canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, September 4, 2017

PEARLA




Supplies needed:

Scrapkit: I am using a stunning kit from Chili's Designz called "Pearls" which you can get by going here

Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 4, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Greenery Element - resize by 90%

Paste and position on the top of the frame

Select Pearls 4 Element - resize by 55%

Image Free Rotate Left by 15% and paste on the top left

Select Lips 2 Element - resize by 60%

Paste and position on the top right

Select Perla Element - resize by 65%

Paste and position on the left side

Apply Lokas 3D Shadow at default settings

Select Heart Element - resize by 50%

Image Free Rotate Right by 15% and paste on the bottom right

Select Bottle Element - resize by 40%

Paste and position on the bottom right

Select Perfume Element - resize by 30%

Paste and position on the bottom left

Select Bracelet Element - resize by 30%

Paste and position on the bottom

Select Lipstick 2 Element - resize by 40%

Paste and position on the bottom

Select Powder Element - resize by 30%

Paste and paste on the bottom

Select Rouge Element - resize by 30%

Paste and position on the bottom

Select Flower 6 Element - resize by 30%

Paste and position on the bottom

Select Shoe 2 Element - resize by 45%

Paste and position on the bottom

Select Sparkles 3 Element - resize by 75%

Paste and position on the canvas where desired

Paste paper 2 on the canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

STEAMPUNK BEAUTY



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Steampunk Beauty" which you can get by going here

Mask 122 from Babs Bitzy Designz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 4, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 31 - resize by 55%

Paste and position in the center of the canvas

Select Frame Element 27 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6 and change to screen

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change the closeup to Overlay

Apply dropshadow and merge down on paper layer

Move paper layer below frame layer

Select Element 10 - resize by 45%

Image Free Rotate Right by 15% and paste in the center of the canvas

Drop below frame layer

Select Element 1 - resize by 75%

Paste and position on the top of the frame layer

Select Element 62 - resize by 15%

Paste and position on the top left

Select Element 13 - resize by 25%

Paste and position on the bottom right

Select Element 88 - resize by 15%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 83 - resize by 30%

Paste and position on the bottom left

Select Element 22 - resize by 25%

Paste and position on the bottom left

Select Element 95 - resize by 20%

Paste and position on the bottom left

Select Element 60 - resize by 20%

Paste and position on the bottom

Select Element 90 - resize by 30%

Paste and position on the bottom

Select Element 54 - resize by 15%

Paste and paste on the bottom

Select Element 41 - resize by 40%

Paste and position on the bottom

Select Element 56 - resize by 20%

Paste and position on the bottom

Select Element 4

Paste and position on the canvas where desired

Paste paper 7 on the canvas

Apply Mask 122 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, September 3, 2017

GHOULS NIGHT OUT



Supplies needed:

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Ghouls Night Out" which you can get by going here

Mask 27 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 3, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 54 - resize by 75%

Paste and position in the center of the canvas

Select Element 136 - resize by 65%

Paste and position on the top right

Select Element 44 - resize by 65%

Paste and position on the bottom

Select Element 82 - resize by 55%

Paste and position on the bottom

Select Frame Element 4 - resize by 60%

Image Free Rotate Right by 15% and paste on the bottom right

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste element 16 on paper layer and delete

Select none

Chage the closeup to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 18 - resize by 25%

Paste and position on the top right

Select Element 78 - resize by 55%

Paste and position on the top left

Select Element 24 - resize by 55%

Paste and position on the left side

Select Element 80 - resize by 45%

Paste and position on the bottom left

Select Element 77 - resize by 40%

Paste and position on the bottom left

Select Element 29 - resize by 30%

Paste and position on the top left

Select Element 126 - resize by 25%

Paste and position on the bottom right

Select Element 131 - resize by 20%

Paste and position on the bottom right

Select Element 114 - resize by 10%

Paste and position on the bottom right

Select Element 108 - resize by 15%

Paste and position on bottom right

Select Element 99 - resize by 20%

Paste and position on the right side

Select Element 25 - resize by 40%

Paste and position on the bottom

Select Element 87 - resize by 25%

Paste and position on the bottom

Select Element 63 - resize by 15%

Paste and paste on the bottom

Select Element 42 - resize by 15%

Paste and position on the bottom

Select Element 94 - resize by 15%

Paste and position on the bottom

Select Element 30 - resize by 15%

Paste and position on the bottom left

Select Element 95 - resize by 15%

Paste and position on the bottom

Paste paper 9 on the canvas

Apply Mask 27 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif