I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Sunday, March 19, 2017

DEAD HOLLOWIE


.






These Extra's were made using the amazing artwork by Selisan Al-Gaib and kit by Toxic Desirez called "Dead Halloween 2". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks
Saturday, March 18, 2017

BLOOMING BUTTERFLY




Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Chili's Designz called "Butterflies" which you can get by going here

Mask 2 from Kissing Kate which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 18 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop opacity down to 60%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Vine Element - resize by 40%

Image Free Rotate Left by 15% and paste on the top right

Select Trellis 2 Element - resize by 50%

Paste and position on the right side

Select Deco Element - resize by 40%

Paste and position on the right side

Select Can Element - resize by 40%

Paste and position on the bottom right

Select Butterfly 7 Element - resize by 40%

Image mirror and paste on the bottom right

Select Flower 5 Element - resize by 25%

Paste and position on the bottom right

Select Key Element - resize by 25%

Paste and position on the bottom right

Select Sparkles Element - resize by 50%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Butterfly 2 Element - resize by 40%

Paste and position on the top left

Select Greenery 3 Element - resize by 45%

Paste and position on the bottom left

Select Parapluie Element - resize by 45%

Paste and position on the bottom left

Select Clock Element - resize by 40%

Paste and position on the bottom

Select Element 20 - resize by 40%

Paste and position on the bottom

Select Flower Element - resize by 25%

Paste and paste on the bottom

Select WA Element - resize by 40%

Paste and position on the bottom left

Select Rabbit 2 Element - resize by 50%

Paste and position on the bottom left

Select Bud Element - resize by 30%

Paste and position on the bottom

Paste paper 8 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Resize by 110%

Paste paper 5 on canvas

Apply same mask and merge group

Resize by 105% and rotate left by 15%

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, March 14, 2017

THE LOOK




Supplies needed:

I am using the stunning artwork from KiwiBG for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "The Look" which you can get by going here

Mask 71 from Gina Gems which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 14 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 32 - resize by 80%

Paste and position in the center of the canvas

Image Free Rotate Left by 15%

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Hard Light

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 19 - resize by 65%

Image mirror and paste on the top of the frame

Select Element 16 - resize by 60%

Paste and position on the bottom where desired

Select Element 26 - resize by 55%

Paste and position on the bottom right below the frame

Select Element 51- resize by 22%

Paste and position on the left side

Select Element 20 - resize by 25%

Paste and position on the bottom right

Select Element 37 - resize by 20%

Paste and position on the bottom right

Select Element 56 - resize by 30%

Paste and position on the bottom

Select Element 22 - resize by 20%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 21 - resize by 25%

Paste and position on the bottom left

Select Element 59 - resize by 20%

Paste and position on the bottom left

Select Element 58 - resize by 25%

Paste and position on the bottom left

Select Element 4 - resize by 20%

Paste and position on the bottom left

Select Element 3 - resize by 25%

Paste and position on the bottom

Select Element 46 - resize by 25%

Paste and paste on the bottom

Select Element 31 - resize by 22%

Paste and position on the bottom

Select Element 5 - resize by 20%

Image mirror and paste on the bottom right

Select Element 8 - resize by 20%

Paste and position on the bottom

Paste paper 2 on the canvas

Apply Mask 71 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SKATER CAT





These Extra's were made using the amazing artwork by Danny Lee and kit by Jens Sweet Temptations called "Skater Cat". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

FRENCH MAID




Supplies needed:

I am using the stunning artwork from ViNina for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "French Maiden" which you can get by going here

Mask from Kissing Kate which you can find here

Plugins: Lokas 3D Shadow, Eyecandy - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 14 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Luminance (Legacy)

Apply Xero Radiance on default settings

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select WA Element - resize by 30%

Paste and position in on the top where desired

Apply Eyecandy Gradient Glow on fat default settings

Select Butterfly Element - resize by 50%

Paste and position on the top left

Select Hearts Element - resize by 30%

Paste and position on the bottom right

Select Sparkles 3 Element - resize by 45%

Paste and position on the bottom

Select Kande Element - resize by 40%

Paste and position on the bottom right

Select Books Element - resize by 35%

Paste and position on the bottom right

Select Broche Element - resize by 30%

Paste and position on the bottom right

Select Phone Element - resize by 35%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Roll Element - resize by 45%

Paste and position on the bottom left

Select Puppy Element - resize by 40%

Paste and position on the bottom left

Select Clock Element - resize by 40%

Paste and position on the bottom

Select Pillows Element - resize by 45%

Paste and position on the bottom

Select Flower 3 Element - resize by 25%

Paste and position on the bottom

Select Feather 3 Element - resize by 30%

Paste and paste on the bottom

Select Deco Element - resize by 40%

Paste and position on the bottom

Paste paper 9 on the canvas

Apply Mask or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, March 11, 2017

VAMPIRE KISS




Supplies needed:

I am using the stunning artwork from KiwiBG for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Freeks Creations called "Jen" which you can get by going here

Mask 14 from Artmama which you can find here

Plugins: Lokas 3D Shadow, Eyecandy - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 11 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete, select none

Move paper layer below frame layer

Select Blood 3 Element - paste and position on top of the paper layer where desired

Select Glass Element - resize by 40%

Paste and position on the bottom of the paper layer

Image duplicate and mirror

Select Leaves Element - resize by 45%

Paste and position on the top left

Select Heart Element - resize by 30%

Paste and position on the top right

Select Tree Element - resize by 75%

Paste and position on the right side

Select WordArt 2 Element - resize by 50%

Paste and position on the top

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Flowers Element - resize by 30%

Paste and position on the bottom right

Select Bottle 1 Element - resize by 20%

Paste and position on the bottom right

Select Coffin Element - resize by 40%

Paste and position on the bottom

Select Grave Element - resize by 40%

Paste and position on the bottom left

Select Clock Element - resize by 40%

Paste and position on the bottom left

Select Ribbon 1 Element - resize by 50%

Paste and paste on the bottom

Select Lantern Element - resize by 30%

Paste and position on the bottom

Select Skull 2 Element - resize by 25%

Paste and position on the bottom

Select Blood 2 Element - resize by 20%

Paste and position on the bottom

Select Wine Element - resize by 25%

Paste and position on the bottom

Select Key Element - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom

Paste paper 4 on the canvas

Apply Mask 14 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Friday, March 10, 2017

IRISH LOVE






These Extra's were made using the amazing artwork by Danny Lee and kit by Disturbed Scraps called "Eat Drink and Be Irish". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

ST. PATRICKS OBSESSION



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "St Patricks Obsession" which you can get by going here

Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow, Xero - Radiance
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 10 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 94 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 7

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Screen and drop opacity down to 50%

Apply Xero Radiance on default settings

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 18 - resize by 75%

Paste and position in the center of the canvas

Select Element 76 - resize by 30%

Paste and position on the top right

Select Element 79 - resize by 15%

Paste and position on the top left

Select Element 22 - resize by 40%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 33 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 44 - resize by 15%

Paste and position on the bottom

Select Element 43 - resize by 20%

Paste and position on the bottom

Select Element 16 - resize by 40%

Paste and position on the right side where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 50 - resize by 30%

Paste and position on the bottom left

Select Element 2 - resize by 30%

Paste and position on the bottom left

Select Element 61 - resize by 12%

Paste and position on the bottom left

Select Element 42 - resize by 30%

Paste and position on the bottom

Select Element 20 - resize by 40%

Paste and position on the bottom

Select Element 45 - resize by 20%

Paste and paste on the bottom

Select Element 15 - resize by 40%

Paste and position on the bottom

Paste paper 1 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Monday, March 6, 2017

ST. PATTY POSSION



Supplies needed:

I am using the stunning artwork from Chris Pastel for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designz by Sue called "St. Patty Possion 2" which you can get by going here

St. Patricks Day Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 6 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 38 - resize by 85%

Paste and position in the center of the canvas

Select Frame Element 2 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 3 - resize by 40%

Paste and position on the top of the frame

Select Element 34 - resize by 45%

Image Free Rotate Left by 15% and paste on the top left

Select Element 15 - resize by 50%

Paste and position on the bottom

Select Element 40 - resize by 55%

Paste and position on the bottom of the frame where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 8 - resize by 40%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 7 - resize by 20%

Paste and position on the bottom

Select Element 31 - resize by 30%

Paste and position on the bottom

Select Element 11 - resize by 20%

Paste and position on the bottom

Select Element 45 - resize by 15%

Paste and paste on the bottom

Select Element 19 - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 12 - resize by 15%

Paste and position on the bottom left

Select Element 17 - resize by 35%

Paste and position on the bottom left

Select Element 39 - resize by 30%

Paste and position on the bottom left

Paste paper 4 on the canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, March 5, 2017

MAMELUKE 2




Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Mameluke" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 5 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up to Overlay

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Circle Element - resize by 60%

Paste and position on the top of the frame

Select Moon 4 Element - resize by 25%

Image Free Rotate Right by 15% and paste on the top left

Select Dresser Element - resize by 55%

Paste and position on the right side

Select Deco Element - resize by 20%

Paste and position on the right side

Select Sparkles 3 Element - resize by 55%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Flower 3 Element - resize by 25%

Paste and position on the bottom right

Select Basket Element - resize by 40%

Paste and position on the bottom right

Select Slippers Element - resize by 30%

Paste and position on the bottom right

Select Lamp 3 Element - resize by 30%

Paste and position on the bottom right

Select Box 3 Element - resize by 40%

Paste and paste on the bottom below tube layer

Select Pillow 5 Element - resize by 30%

Paste and position on the bottom

Select Perfume Element - resize by 30%

Paste and position on the bottom

Select Star 5 Element - resize by 25%

Paste and position on the bottom

Select Butterfly 2 Element - resize by 50%

Paste and position on the left side

Select Greenery 5 Element - resize by 30%

Image mirror and paste on the bottom left

Select Flower 6 Element - resize by 25%

Paste and position on the bottom left

Select Teddy Element - resize by 40%

Paste and position on the bottom

Select Pacifier Element - resize by 30%

Paste and position on the bottom

Paste paper 4 on the canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

JUST HOLD ON




These Extra's were made using the amazing artwork by Selisan Al-Gaib and kit by Kizzed by Kelz called "Daitie". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Saturday, March 4, 2017

DARK ALICE




Supplies needed:

I am using the stunning artwork from Mariel for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Mariel called "Dark Alice" which you can get by going here

Mask 176 from Aqua which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 4 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 2 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Element 31 - resize by 55%

Paste and position on the right side

Select Element 38 - resize by 25%

Paste and position on the bottom right

Select Element 13 - resize by 50%

Paste and position on the bottom center of the frame

Select Element 40 - resize by 75%

Paste and position on the top of the frame

Select Element 45 - resize by 20%

Paste and position on the top

Select Element 6 - resize by 30%

Paste and position on the right side

Select Element 21 - resize by 30%

Paste and position on the bottom right

Image duplicate and mirror

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 52 - resize by 15%

Paste and position on the bottom right

Select Element 54 - resize by 25%

Paste and position on the bottom

Select Element 10 - resize by 20%

Paste and position on the bottom

Select Element 23 - resize by 15%

Paste and position on the bottom

Select Element 49 - resize by 15%

Paste and paste on the bottom

Select Element 50 - resize by 20%

Paste and position on the bottom left

Select Element 47 - resize by 25%

Paste and position on the bottom left

Select Element 35 - resize by 15%

Paste and position on the bottom right

Paste paper 4 on the canvas

Apply Mask 176 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

AMLETTE




Supplies needed:

I am using the stunning artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Amlette" which you can get by going here

Mask 4 from Butterfly Flutterby which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on March 4 , 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 23 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper layer below frame layer

Select Element 1 - resize by 35%

Paste and position on the left side

Select Element 28 - resize by 25%

Paste and position on the top right

Select Element 95 - resize by 15%

Paste and position on the top right

Select Element 89 - resize by 15%

Paste and position on the top left

Select Element 58 - resize by 30%

Image Free Rotate Left by 15% and paste on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 20%

Paste and position on the bottom left

Select Element 24 - resize by 20%

Paste and position on the bottom left

Select Element 52 - resize by 15%

Image Free Rotate Right by 15% and paste on the left side

Select Element 55 - resize by 20%

Paste and position on the bottom right

Select Element 11 - resize by 20%

Paste and paste on the bottom right

Select Element 3 - resize by 15%

Paste and position on the bottom right

Select Element 63 - resize by 15%

Paste and position on the bottom right

Select Element 88 - resize by 20%

Paste and position on the bottom right

Select Element 78 - resize by 12%

Paste and position on the bottom

Select Element 69 - resize by 12%

Paste and position on the bottom

Select Element 7 - resize by 8%

Paste and position on the bottom

Paste paper 8 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif