Lee's Creationz: January 2013

Supplies needed:

I am using the amazing art from Joahannah von Frankenstein for this tutorial, which you can find here

Scrapkit: I am using a kit from Killer Kitty's Killer Kreations called "Broken Cupid" which you can get by going here

Template 49 from Leah which can be found here

Mask 179 from Insatiable Dreams which you can find here

Plugins used: Penta - Dot and Cross, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 28, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Words layer

Add new raster layer and flood-fill with color of choice

Reselect Words layer

Select all, float, defloat

Go back to color layer you just filled

Select invert, delete, select none

Apply Eyecandy Gradient Glow at default settings (Glow width 3)

Delete/Hide original words layer

Select Words back layer and delete

Select Rect 1 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rect layer

Select Rect 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice (I used #0d004c)

Select none

Apply Penta Dot and Cross with the following settings:

Delete/Hide original rect layer

Select Rect 3 layer and repeat above steps

Select Swirlie Element

Paste and position on right side below rect 2 layer

Select GlowHeart Element - resize by 65%

Paste and position in center on top of Rect 2 and Rect 3

Select Frame 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select Rect 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 75%

Apply dropshadows and merge down on top of gradient layer

Delete/Hide original rect layer

Select Circle layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Select Rect 7 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rect layer

Select Rect 8 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select SpikedHeart Element - resize by 40%

Image, mirror and paste/position on bottom right side

Select SadCat Element - resize by 45%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 179

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:The PSP Project | 0 comments

Friday, January 25, 2013

PIGTAILS

11:37 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Ismael Rac for this tutorial, which you can find here

Scrapkit: I am using the matching kit from Broken Sky Designs called "Pigtails" which you can get by going here

Template 185 from Beth which can be found here

Mask 250 from Weescotslass which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 25, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layer and move to the bottom if desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Gradient Rect layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient colors of choice
(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeups to Hard Light

Apply Xero Bad Dream at default settings or random setting of choice

Drop opacity on close-up down to 85%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original gradient layer

Select Dotted Rect layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original dotted layer

Select Glitter Rect 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original rect 1 layer

Select Glitter Rect 3 layer and repeat above steps

Select Glitter Rect 2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rect layer

Select Glitter Rect 4 layer and repeat above steps

Select Blue Rect 1 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original rect layer

Select Blue Rect 3 layer and repeat above steps

Select Blue Rect 2 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rect layer

Select Blue Rect 4 layer and repeat above steps

Select White Rect 1 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rect layer

Select White Rect 2 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 17

Paste and position on the bottom behind tube layer

Select Element 36 - resize by 50%

Paste and position on left side behind Black Rect layer

Select Element 21 - resize by 45%

Paste and position on top right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 250

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Broken Sky Dezine | 0 comments

Wednesday, January 23, 2013

BAD KITTY

12:31 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Jose Cano for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from MistyLynns Creations called "Bad Kitty" which you can get by going here

Template 35 from Leah which can be found here

Mask 248 from Weescotslass which you can find here

Plugins used: Eyecandy 4000 Gradient Glow, Alien Skin Eyecandy 5 Impact - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Naughty Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original wordart layer

Select Naughty Back wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original wordart layer

Select Kitty Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Alien Skin Impact - Glass at default settings

Delete/Hide original wordart layer

Select Kitty back Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original wordart layer

Select Paw 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original paw layer

Select Paw 3 layer and repeat above steps

Select Paw 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Apply Alien Skin Impact - Glass at default settings

Apply Eyecandy Gradient Glow on fat default settings (glow width 3)

Select your magic wand tool and click on white glow areas on paw

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select none

Delete/Hide original paw layer

Select Naughty Kitty Repeat layer

Add new raster layer and flood-fill with color of choice

Reselect Repeat layer

Select all, float, defloat

Go back to layer you just filled

Select invert, delete, select none

Change layer to overlay

Delete/Hide original repeat layer

Select Circle 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Drop opacity on close-up down to 70%

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original circle layer

Select Circle 2 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select Circle 3 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 4 layer and repeat above steps

Select Frame 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original frame layer

Select Rect 1 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rect layer

Select Frame 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Delete/Hide original frame layer

Select Rect 2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rect layer

Select Rect 4 layer and repeat above steps

Select Rect 3 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rect layer

Select Thin Rect layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Corset Element - resize by 70%

Image, Free Rotate right by 15%

Select Lipstick Element - resize by 65%

Paste and position on top of corset layer

Select Cupcake01 Element - resize by 40%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 248

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps and the City | 1 comments

Monday, January 21, 2013

LOVE ME

8:15 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Zlata_M for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Amy Marie called "Love Me" which you can get by going here

Template 176 from Millie which can be found here

Mask 4 from Candy Treats which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Penta - Jean, Penta, Color dots, Alien Skin Eyecandy 5 Impact - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 21, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Love Me Wordart 12 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Alien Skin Impact Glass at factory default settings

Apply Eyecandy Gradient Glow at fat default settings (width 3)

Delete/Hide original wordart layer

Select Heart 11 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Alien Skin Impact Glass with same default settings

Delete/Hide original Heart layer

Select Heart 10 layer and repeat above steps

Select Heart 9 layer and repeat above steps except flood-fill with gradient of choice if you prefer

Select Heart 8 layer and repeat steps that you did for Heart 9

Select Square 7 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original square layer

Select Square 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta Jeans with the following settings:

Delete/Hide original square layer

Select Rectangle Strip 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original rectangle layer

Select Rectangle Strip 4 layer and repeat above steps

Select Rectangle Strip 3 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Strip 2 layer and repeat above steps

Select Square 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta Color Dot at the following settings:

Delete/Hide original Square layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Elements 28, 29 and 30 - resize them all by 40%

Paste and position where desired

Select Element 42 - resize by 40%

Image, Free Rotate Left by 20%

Paste and position on bottom left side

Select Element 67 - resize by 35%

Paste and position on top of element 42 (envelope) layer

Select Element 40 - resize by 35%

Paste and position on bottom right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 4

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Amy Marie | 0 comments

Sunday, January 20, 2013

VALENTINE ANGEL

12:30 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Bonnies Creations for this tutorial, which you can find here

Scrapkit: I am using a kit from Designs by Joan called "Love" which you can get by going here

Heart Template 2 from Tamie which can be found here

Heart Mask here

Plugins used: Alien Skin Eyecandy 5 Impact - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 20, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layer and move if you desire

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 85%, Monochrome checked)

Select Hearts layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Apply Alien Skin Impact Glass on factory default settings

Delete/Hide original hearts layer

Select Middle Heart layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Apply Alien Skin Impact Glass on factory default settings

Delete/Hide original heart layer

Select Love66 Element

Paste and position on top of heart layer

Select Love14 Element - resize by 80%

Image mirror - paste and position on top of heart layer

Select Circle2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Love55 Element - resize by 65%

Paste and position on top left side

Select Love80Element - resize by 40%

Paste and position on bottom right side - move to bottom layer

Image, duplicate, flip and position where you prefer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Heart Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Bonnies Creations | 0 comments

Saturday, January 19, 2013

BAD GIRL LELA

7:29 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Tony Tzanoukakis for this tutorial, which you can find here

Scrapkit: I am using the matching kit from Irish Princess called "Lela" which you can get by going here

Template 455 from Missy which can be found here

Mask of choice

Plugins used: Penta - Cross and dots, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layers and move to the bottom if you desire

Select Top Wordart layer

Adjust, Hue and Saturation, Colorize with the following settings:

Select the Bottom Wordart layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Centre Circle2 layer

Apply Penta Dot and Cross on the following settings:

Select Circle Back layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Rectangle2 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 1 layer and repeat above steps

Select Drapery Element - resize by 50%

Paste and position on right side behind circle back layer

Select Rounded Edge Rec2 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rounded rec layer

Select Rounded Edge Rect 1 layer and repeat above steps

Select Square 2 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Select Thin Rectangle2 layer

Effects, Texture Effects, Weave (Gap size 3, Width 6, Opacity 5, fill gaps checked)

Select Thin Rectangle1 layer and repeat above

Select Circle4 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle3 layer and repeat above steps

Select Circle 2 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Butterfly Element - resize by 30%

Paste and position on top left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

| 0 comments

Friday, January 18, 2013

QUEEN OF HEARTS

5:13 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Tony Tzanoukakis for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Niquie's Designs called "My Love" which you can get by going here

Template 149 from Pooker which can be found here

M1 Mask from Kylie which can be found on the Misfits Blog here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 18, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Sideways Hearts layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Apply Eyecandy Glass at default settings

Delete/Hide original hearts layer

Select Pink Heart Strips layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original strip layer

Select White Squares layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings or random setting of choice

Drop the opacity on close-up down to about 75%

Apply dropshadow and merge down on top of gradient layer

Delete/Hide original rectangles layer

Select Pink Backgrounds layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original backgrounds layer

Select White Circle 1 layer

Select all, float, defloat

Paste nq-paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Black Dotted Circle1 and delete

Select Lt Pink Circle1 layer

Select all, float, defloat

Paste nq-paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 23 - resize by 46%

Paste and position on top of circle1 layer

Select White Circles2 layer

Select all, float, defloat

Paste nq-paper 11

Select invert, delete, select none

Delete/Hide original circles layer

Select Lt Pink Circles2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Delete/Hide original circles layer

Select Pink Circles layer

Select all, float, defloat

Paste nq-paper 8

Select invert, delete, select none

Delete/Hide original circles layer

Select Grey Squares layer

Select all, float, defloat

Paste nq-paper 1

Select invert, delete, select none

Delete/Hide original squares layer

Select White Strips layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 80%, Monochrome checked)

Delete/Hide original strips layer

Select Pink Squares layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice

Select none

Apply Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original squares layer

Select White Heart Lines layer

Select all, float, defloat

Paste nq-paper 11

Select invert, delete, select none

Delete/Hide original hearts layer

Select Pink Dotted Outlines layer

Add new raster layer and flood-fill with black or color of choice

Reselect Dotted Outlines layer

Select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Delete/Hide original dotted layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 50 - resize by 40%

Paste and position on right side behind frames layer

Select Element 13 - resize by 32%

Paste and position on upper left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask M1

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Niqui Designs | 0 comments

Thursday, January 17, 2013

VAMPY GOTH

12:46 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from KiwiFireStorm for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Tasha's Playground called "Vamp Goth" which you can get by going here

Template 177 from Toxic Desirez which can be found here

Mask 22 from Gina Gem here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 17, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Circle layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Glass Element - resize by 90%

Paste and position on top of circle layer

Select Round Rectangle layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Paste close-up tubes of choice on top of paper and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 55%

Apply dropshadow and merge down on top of paper layer

Delete/Hide original rectangle layer

Select Bottom Red Rectangle layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Top Red Rectangle layer and repeat above steps

Select Blood Drip Element - resize by 65%

Paste and position on top of Rectangle layers

Select Bottom Red Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Top Red Circle layer and repeat above steps

Select Bottom Black Square layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Top Square layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Vines Element

Paste and position on right side behind tube layer

Select Coffin Element

Paste and position behind tube layer towards the left side

Select Cemetery Element - resize by 85%

Paste and position behind the coffin element

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 22

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:The PSP Project | 0 comments

Wednesday, January 16, 2013

CHERRY POP

1:09 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Cliff Thomas for this tutorial, which you can find here

Scrapkit: I am using a FTU kit from Pink Princess Scraps called "Pop My Cherry" which you can get by going here

Template 131 from Leah which can be found here

Val2012Mask2 from Vix here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 16, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Words 2 back and delete

Select Words 2 and apply Eyecandy Gradiant Glow on fat default settings

Select Circle 1 layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original circle layer

Select Strip 2 rectangle layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original strip layer

Select Circle 3 layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture effects, weave (Gap size 3, Width 5, Opacity 10, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original circle layer

Select Half Circle 5

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 4)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 85%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 5)

Hide/Delete original circle layer

Select Square 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original square layer

Select Square 9 layer and repeat above steps

Select Rectangle 7 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 8 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original square layer

Select Square 10 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 35%

Paste and position on bottom right-hand side below words layer

Select Element 40 - resize by 40%

Paste and position on bottom right above pillow element

Select Element 65

Paste and position behind tube layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Val Mask 2

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:FTU,indie-Zine | 0 comments

Tuesday, January 15, 2013

STAR STRUCK

11:43 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Keith Garvey for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Scrappin Krazy Designs called "Star Struck" which you can get by going here

Template 110 from Pooker which can be found here

Mask 191 from Insatiable Dreams here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 15, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Hearts layer and delete

Select Wordart layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original wordart layer

Select Wordart, Black Strip and Lilac Strip

Group them all together as (Group 1) and move if you desire

Select Lilac Strip

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original strip layer

Select Black Circle layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 12 - resize by 95%

Paste and position on top of the Circle layer

Select Blue Circle 1 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original circle layer

Select Purple Circle 1 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original circle layer

Select White Rectangle layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 4)

Paste close-up tubes of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original rectangle layer

Select Dotted Rectangle layer

Add new raster layer and flood-fill with color of choice

Reselect Dotted rectangle layer

Select all, float, defloat

Go back and select color layer you just filled

Select invert, delete, select none

Delete/Hide original dotted layer

Select Blue Circle2 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Select Blue Circle3 layer and repeat above steps

Select White Strip1 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original strip layer

Select White Strip 2 layer and repeat above steps

Select Purple Circle2 layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original circle layer

Select Purple Circle3 layer and repeat above steps

Select Black Block1 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original block layer

Select Black Block2 layer and repeat above steps

Select Lilac Circle1 layer

Select all, float, defloat

Paste paper 11

Select invert, delete, select none

Delete/Hide original circle layer

Select Lilac Circle2 layer and repeat above steps

Select Arrow1 and Arrow2 layer and delete

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 14 - resize by 65%

Image, Free Rotate Left by 20%

Paste and position on upper left-hand side and move to bottom layer

Image, duplicate, mirror, flip

Select element 2 - resize by 80%

Paste and position on upper right-hand side and move to bottom layer

Select element 21 - resize by 85%

Paste and position on bottom right side behind Black Strip layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply M3 mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scrappin Krazy Designs | 0 comments

Saturday, January 12, 2013

PINK LOVE

12:53 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Ismael Rac for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Niqui's Designs called "Pink Love" which you can get by going here

Template 210 from Beth which can be found here

Mask M3 from Kylie on the Mistfits Blog here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 12, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Arrow1 layer

Select all, float, defloat

Selections, Modify, Contract by 2

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass at default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Delete/Hide original arrow layer

Select Arrow 2 layer and repeat above steps

Select Heart1 and Heart2 layer and move if desired

Select Heartbreaker wordart layer and move to the bottom like I did or keep in original place

Select all, float, defloat

Selections, Modify, Contract by 3

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass with default settings

Select all, float, defloat

Selections, Expand by 3

Add new raster layer and flood-fill with white (#ffffff)

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Move layer below original color wordart layer

Delete/Hide original wordart layer

Select White frame1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome unchecked)

Delete/Hide original frame layer

Select White Frame 2 layer and repeat above steps

Select Pink Square 1 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 75%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original square layer

Select Pink Square 2 layer and repeat above steps

Select Black Circle 1 layer

Select all, float, defloat

Paste nq-paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Select Black Circle 2 layer and repeat above steps

Select Pink Circle layer

Select all, float, defloat

Paste nq-paper 13

Select invert, delete, select none

Delete/Hide original circle layer

Select Black Circle Frame layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome unchecked)

Delete/Hide original frame layer

Select White Circle layer

Select all, float, defloat

Paste nq-paper 9

Select invert, delete, select none

Delete/Hide original circle layer

Select Thin Pink Frame 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select Thin Pink Frame 2 layer and repeat above steps

Select Black Rect Frame 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome unchecked)

Delete/Hide original frame layer

Select invert, delete, select none

Select Black Rect Frame2, 3 and 4 layer and repeat above steps

Select Pink Rect 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Burn

Apply dropshadow and merge down on top of gradient

Delete/Hide original rectangle layer

Select Pink Rect2 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 37 - resize by 30%

Paste and position on top left-hand side

Select Element 31 - resize by 35%

Image, Free Rotate Right by 20%

Paste and position on top right-hand side

Select Element 57 - resize by 70%

Paste and position on the bottom

Select Element 19 - resize by 25%

Paste and position on bottom left behind wordart layers

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply M3 mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Niqui Designs | 0 comments

Wednesday, January 9, 2013

DARK VALENTINE

3:57 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Barbara Jensen for this tutorial, which you can find here

Scrapkit: I am using an awesome FTU kit from Rissa's Designs called "Dark Valentine" which you can get by going here

Mask 133 from Aqua which you can find on the Misfits blog here

Plugins used: Alien Skin Eyecandy 5 Impact- Chrome, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 9, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 700 x 650 blank canvas (we can resize it later)

Select Frame02 and paste in the center of the canvas

Move slightly over to the left

Select your magic wand tool and click in the center of your frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 30

Add new raster layer and flood-fill with gradient of choice

Select none

Apply Alien Skin Eyecandy 5 Impact- Chrome the the following Black Latex default settings:

Move layer below frame

Apply dropshadow to frame

Select Frame 06 Element - resize by 70%

Paste and position on right side of circle frame

Select your magic wand tool and select the center of each frame (hold shift key)

Add new raster layer and flood-fill with gradient of choice

(Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Select none

Apply Xero Bad Dream at default settings

Change closeup to Luminance (Legacy) and Hard Light for the two other closeups

Drop the opacity on close-ups down to about 70%

Apply dropshadows and merge tubes down on top of gradient

Move gradient/tube layer below frame

Select RD_Feathers element - resize by 50%

Paste and position in the center of Frame 6

Select RD_WAElement - resize by 40%

Paste and position above Frame 2 on top left

Apply Eyecandy Gradient Glow at fat default settings

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select RD_Corset element - resize by 45%

Image, Free Rotate Left by 20%

Paste and position under tube layer on right side

Select RD_Cupcake element - resize by 30%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 133

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:FTU,Rissa's Designs | 0 comments

ROCKIN ACE

11:33 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Jose Cano for this tutorial, which you can find here

Scrapkit: I am using a kit from Lizquis Scraps called "Ace" which you can get by going here

Template 163 from Millie which can be found here

Mask 11 from Horseplay's Pastures here

Plugins used: Penta - Color dot, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 9, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Circle 10 border layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original circle layer

Select Circle 8 border and repeat above steps

Select Circle 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Apply Xero Bad Dream at default settings

Change closeup to Luminance (Legacy)

Drop the opacity on close-ups down to about 75%

Apply dropshadows and merge down on top of gradient

Hide/Delete original circle layer

Select Circle 7 layer and repeat above steps

Select Swirlies Element - resize by 95%

Paste and position below Circle 9 on right side

Select Balloons Element - resize by 65%

Paste and position on top of swirlie element
Select Rectangle 6 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide rectangle layer

Select Square Rectangle 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original rectangle layer

Select Square 4 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original square layer

Select Rectangles 3 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangles layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangles 1 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangles layer

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow at default settings

Select Jeans Element - resize by 55%

Image, Free Rotate Right by 20%

Paste and position on bottom left side

Select Shoe Element - resize by 40%

Paste and position on top of Jeans element

Select Candies element - resize by 55%

Paste and position on bottom right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 11

Merge group and move to the bottom

Apply Penta Color dot on default settings

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps and the City | 0 comments

Tuesday, January 8, 2013

DARK ANGEL

2:19 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Alex Prihodko for this tutorial, which you can find here

Scrapkit: I am using a kit from Amy Marie called "Dark Angel" which you can get by going here

Collab Template 1 from Millie and Kimberly which can be found here

Mask of Choice

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 8, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Frame 3 element - resize by 85%

Paste and position in the center of your canvas/template

Select your magic wand Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)and click in the center of frame

Selections, Modify, Expand by 10

Paste paper 14

Select invert, delete, select none

Move paper below frame

Select Web Element - resize by 90%

Paste and position on top of paper element

Select Star 12 and 13 layer and delete

Select Circle borders 10 and 11 and delete

Select Rectangle 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Apply Xero Bad Dream at default settings

Apply dropshadows and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original rectangle layer

Select Rectangle 3 layer and repeat above steps

Select Rectangle 6 layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 5 layer and repeat above steps

Select Circle 2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Select your lasso tube (hold down shift) and select wings as shown:

Select your Change to Target tool as shown and colorize wings with color of choice

Select none

Apply Lokas 3D Shadow at default settings

Select Element 52 - resize by 75%

Paste and position on bottom left side

Select Element 62- resize by 50%

Paste and position on top of element 52

Select Candles Element - resize by 50%

Paste and position on top of element 62

Select Harp element- resize by 80%

Paste and position on bottom right side below tube layer

Select Element 87

Paste and position on top layer where desired

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of Choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Amy Marie | 0 comments

Friday, January 4, 2013

DATE NIGHT

3:09 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Zlata_M for this tutorial, which you can find here

Scrapkit: I am using a kit from Broken Sky Dezign called "Date Night" which you can get by going here

Template from Tina which can be found on the Misfits Blog here

Kylie M4 mask which you can find on the Misfits Blog here

Plugins used: Penta-Jeans, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 4, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Words layer

Add new raster layer and flood-fill with color of choice

Reselect Words layer

Select all, float, defloat

Go back and select layer you just filled

Select invert, delete, select none

Delete/Hide original words layer

Select 4Squares layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Select none

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 75%

Apply dropshadows and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original squares layer

Select Circle layer

Select all, float, defloat

Paste paper BSD_18

Select invert, delete, select none

Delete/Hide original circle layer

Select 4ThinRecs layer

Select all, float, defloat

Paste paper BSD_11

Select invert, delete, select none

Delete/Hide original thinrecs layer

Select ThinRectangles layer and repeat above steps

Select PinkSquares layer

Select all, float, defloat

Paste paper BSD_5

Select invert, delete, select none

Delete/Hide original squares layer

Select BigSquare layer

Select all, float, defloat

Paste paper BSD_9

Select invert, delete, select none

Apply Effects, Texture, Weave (Gap size 3, Width 6, Opacity 15, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original square layer

Select CircleLeft layer

Select all, float, defloat

Paste paper BSD_3

Select invert, delete, select none

Apply Penta - Jeans at default setting

Delete/Hide original circle layer

Select CircleRight layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Candle3 element - resize by 35%

Paste and position on bottom right side

Select Corset element - resize by 35%

Image, Free rotate right by 15%

Paste and position under candle element

Select Ticket element - resize by 30%

Image, Free rotate left by 20%

Paste and position on bottom left side

Select Candle2 element - resize by 55%

Paste and position on bottom left side above ticket element

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask M4

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Broken Sky Dezine | 0 comments

EMOLICIOUS

11:46 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Ximbixill for this tutorial, which you can find here

Scrapkit: I am using a kit from Tammy's Scraps called "Emolicious" which you can get by going here

Collab Template 4 from Millie and Kimberly which can be found here

DMask 0006 here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 4, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Strip 11 rectangle layer

Select all, float, defloat

Paste paper 14

Select invert, delete, select none

Delete/Hide original strip layer

Select Strip 8 rectangle layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original strip layer

Select Element 3

Paste and position on top of strip 8 paper layer

Select Circle 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 80%

Apply dropshadows and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Circle 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Delete/Hide original circle layer

Select Element 27 - resize by 85%

Paste and position on top of circle 9 layer

Select Square 7 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Square 2 layer and repeat above steps

Select Square 6 layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original square layer

Select Square 5 layer and repeat above steps

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 15

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 3 layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 16

Paste and position in the center of canvas behind tube layer

Select Element 43 - resize by 85%

Paste and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 0006

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:The PSP Project | 0 comments

Labels

I CT For

Blog Archive

Facebook

BROKEN CUPID

PIGTAILS

BAD KITTY

LOVE ME

VALENTINE ANGEL

BAD GIRL LELA

QUEEN OF HEARTS

VAMPY GOTH

CHERRY POP

STAR STRUCK

PINK LOVE

DARK VALENTINE

ROCKIN ACE

DARK ANGEL

DATE NIGHT

EMOLICIOUS

Search

Followers

My Blinkies

Favorite Blogs