Labels

I CT For

photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
6DkjWLG bellablinki nAJ6bKr

Blog Archive

Facebook

Sunday, November 29, 2015

RUSSIAN WINTER

12:53 PM | Posted by | Edit Post


Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel Designs called "Winter in Russia" which you can get by going here

Winter Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 29, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 80%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Frame Element 3 - resize by 80%

Paste and position in the center of the canvas above frame 2

Select Element 21 - resize by 25%

Paste and position on the top left

Select Element 79 - resize by 40%

Paste and position on the top center

Select Element 78-1 - resize by 20%

Paste and position on the top frame

Duplicate element 3 times and position around the frame where desired

Select Element 61 - resize by 20%

Paste and position on the top left

Select Element 1 - resize by 65%

Paste and position on the right side

Select Element 81 - resize by 40%

Paste and position on the bottom right

Select Element 54 - resize by 55%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 57 - resize by 20%

Paste and position on the bottom right

Select Element 68 - resize by 20%

Paste and position on the bottom right

Select Element 55 - resize by 20%

Paste and position on the bottom right

Select Element 3 - resize by 12%

Paste and position on the bottom right

Select Element 65 - resize by 10%

Paste and position on the bottom right

Select Element 43 - resize by 15%

Paste and position on the bottom right

Select Element 35 - resize by 20%

Paste and paste on the bottom left

Select Element 15 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 64 - resize by 15%

Paste and position on the bottom left

Select Element 12 - resize by 25%

Paste and position on the bottom left

Select Element 19 - resize by 25%

Paste and position on the bottom left

Paste paper 1 on canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Friday, November 27, 2015

DEADLY ROSE

4:12 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Anna Marine for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Foxy's Designz called "IB JammieKidd 49-2)" which you can get by going here

Mask 19 from Splitdz which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 27, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 55%

Paste and position in the center of the canvas

Image Free Rotate Left by 10% and move over to the left side

Image Duplicate and mirror

Select your magic wand tool and select the center of each of the frames (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Paste paper 4

Select invert, delete, select none

Move paper layer below the window frames

Select Element 16 - resize by 75%

Paste and position in the center of the canvas

Select Element 17 - resize by 40%

Paste and position on top of element 16

Select Element 18 - resize by 50%

Paste and position on the top left

Select WordArt 1 - resize by 55%

Paste and position on the top center

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 1 - resize by 25%

Paste and position on the bottom right

Select Element 20 - resize by 30%

Paste and position on the bottom right

Select Element 11 - resize by 20%

Paste and position on the bottom left

Select Element 21 - resize by 30%

Paste and position on the bottom left

Select Element 5 - resize by 30%

Paste and position on the bottom left

Paste paper 6 on canvas

Apply Mask 19 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Thursday, November 26, 2015

EGYPTIAN NIGHTS

12:45 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Egyptian Nights" which you can get by going here

Mask 4 from Candy Treats which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 26, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Entrance Element - resize by 55%

Paste and position in the center of the canvas

Select Wings 2 Element - resize by 40%

Paste and position on the top of the entrace element

Select Pyramids Element - resize by 55%

Paste and position on the left side below entrance element

Select Column 2 Element - resize by 40%

Paste and position on the right side of the entrance element

Select Statue 15 Element - resize by 45%

Paste and position on the right side of the entrance

Select Pedestal Element - resize by 30%

Paste and position in the center of the entrance element towards the right side

Select Pillow Element - resize by 25%

Paste and position on the bottom center of the entrance

Select Broche 3 Element - resize by 40%

Paste and position on the bottom of the entrance

Select Broche Element - resize by 25%

Paste and position on the bottom of the entrance

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Cat 4 Element - resize by 30%

Paste and position on the bottom left of the entrance

Select Leaf 4 Element - resize by 30%

Paste and position on the bottom left below entrance element

Select Book Element - resize by 20%

Paste and position on the bottom left

Select Vase Element - resize by 30%

Paste and position on the bottom left

Select Gem 2 Element - resize by 40%

Paste and position on the bottom left

Select Flowerleaves 4 Element - resize by 40%

Paste and position on the bottom left

Select Jewelry Element - resize by 25%

Paste and paste on the bottom left

Select Lamp Element - resize by 40%

Paste and position on the bottom left

Select Broche 2 Element - resize by 30%

Paste and position on the bottom left

Select Flower Element - resize by 15%

Paste and position on the bottom right

Paste paper 8 on canvas

Apply Mask 4 or mask of choice

Duplicate layer and merge down

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, November 22, 2015

COZY COCOA

4:40 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Nocturne for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Kissing Kate called "Cosy Afternoon" which you can get by going here

Mask 26 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow, Mura Meister - Copies
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 22, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with color or gradient of choice

Select invert

Paste close-up tube of choice on color layer where desired and delete

Select none

Drop opacity down to 50% and change to Luminance (Legacy)

Apply dropshadow and merge down on paper

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below window frame layer

Select Frame Element 2 - resize by 75%

Paste and position on the top center of the canvas

Select Element 2 - resize by 20%

Paste and position in the center of the canvas

Apply Mura Meister Copies with the following settings:

Select Element 29 - resize by 20%

Paste and position on the bottom

Select Element 30 - resize by 25%

Paste and position on the bottom left

Select Element 13 - resize by 30%

Paste and position on the bottom left

Select Element 33 - resize by 15%

Paste and position on the bottom left

Select Element 11 - resize by 30%

Paste and position on the bottom left

Select Element 36 - resize by 30%

Paste and position on the bottom left

Select Element 15 - resize by 20%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 8 - resize by 30%

Paste and position on the bottom right

Select Element 3 - resize by 15%

Paste and position on the bottom right

Select Element 6 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 10 - resize by 20%

Paste and position on the left side

Paste paper 8 on canvas

Apply Mask 26 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels: | 0 comments
Saturday, November 21, 2015

BEAUTIFUL REINDEER

8:55 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from CSDesigns called "Beautiful Reindeer" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 21, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 37 - resize by 50%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube of choice on paper where desired and delete

Select none

Drop opacity down to 50% and change to Luminance (Legacy)

Apply dropshadow and merge down on paper

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below window frame layer

Select Element 11 - resize by 45%

Paste and position on the top left side

Select Element 13 - resize by 50%

Paste and position on the bottom right

Select Element 25 - resize by 20%

Paste and position on the top center

Select Element 9 - resize by 55%

Paste and position on the right side

Select Element 62 - resize by 30%

Paste and position on the bottom right

Select Element 17 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 8 - resize by 30%

Paste and position on the bottom left

Select Element 32 - resize by 40%

Paste and position on the bottom left

Select Element 4 - resize by 15%

Paste and position on the bottom left

Select Element 26 - resize by 22%

Paste and position on the bottom left

Select Element 16 - resize by 25%

Paste and position on the bottom

Select Element 7 - resize by 15%

Paste and position on the bottom

Select Element 52 - resize by 20%

Paste and paste on the bottom

Select Element 29 - resize by 15%

Paste and position on the bottom

Paste paper 5 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels: | 0 comments
Sunday, November 15, 2015

MALPHAS

6:23 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Malphas Mastemas" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 15, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 1 - resize by 75%

Paste and position in the center of the canvas

Select Element 39 - resize by 65%

Paste and position in the center of the canvas

Select Element 70 - resize by 55%

Paste and position on the bottom

Select Element 28 - resize by 25%

Paste and position on the top left

Select Element 37 - resize by 30%

Paste and position in the center of the canvas

Select Element 54 - resize by 55%

Paste and position on the top right below element 54

Select Element 77 - resize by 50%

Paste and position in the center below element 54

Select Element 33 - resize by 30%

Paste and position on top where desired

Select Element 17 - resize by 40%

Paste and position on the top where desired

Select Element 59 - resize by 25%

Paste and position in the center where desired

Select Element 57 - resize by 20%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 22 - resize by 25%

Paste and position on the bottom left

Select Element 74 - resize by 40%

Paste and position on the bottom left

Select Element 71 - resize by 30%

Paste and position on the bottom left

Select Element 12 - resize by 25%

Paste and position on the bottom left

Select Element 7 - resize by 25%

Paste and position on the bottom

Select Element 32 - resize by 30%

Paste and position on the bottom

Select Element 46 - resize by 25%

Paste and paste on the bottom

Select Element 69 - resize by 30%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels:, | 0 comments
Saturday, November 14, 2015

DEATH LOVER

4:37 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from DiHalim for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Death Lover" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 14, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 2 - resize by 55%

Paste and position in the center of the canvas

Select Element 7 - resize by 40%

Paste and position on the right side and move below element 2

Select Element 19 - resize by 50%

Paste and position in the center of the canvas where desired

Select Element 3 - resize by 50%

Paste and position on the bottom center

Select Element 59 - resize by 20%

Paste and position above element 3

Select Element 73 - resize by 45%

Paste and position on the left side below element 3

Select Element 10 - resize by 30%

Paste and position on top left

Select Element 35 - resize by 50%

Paste and position on the bottom left

Select Element 97 - resize by 20%

Paste and position on the bottom right

Select Element 32 - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 90 - resize by 20%

Paste and position on the bottom left

Select Element 83 - resize by 20%

Paste and position on the bottom left

Select Element 81 - resize by 20%

Paste and position on the bottom left

Select Element 34 - resize by 20%

Paste and position on the bottom left

Select Element 105 - resize by 25%

Paste and position on the bottom left

Select Element 23 - resize by 45%

Paste and position on the top right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels:, | 0 comments
Monday, November 9, 2015

BOUND BY MAGIC

4:09 PM | Posted by | Edit Post
Supplies needed:

I am using the stunning artwork from Enys Guerrero for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "Magic of Chichi II" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 8, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select ClusterFrame Element - resize by 55%

Paste and position in the center of the canvas

Image Free Rotate Left by 15% and move over slightly to the left side

Image duplicate and mirror - reposition if desired

Select Smudged Element - paste and position in the center of the canvase

Move to the bottom layer

Select WA3 Element - resize by 30%

Image Free Rotate Left by 15% and paste on the top left

Select Raven Element - resize by 25%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Pedestal Element - resize by 45%

Paste and position on the bottom left

Select BrushedHeart Element - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom left

Select Skulls Element - resize by 25%

Paste and position on the bottom left

Select Candles Element - resize by 20%

Paste and position on the bottom

Select Grass Element - resize by 45%

Paste and position on the bottom right

Select Cello Element - resize by 40%

Paste and position on the bottom right

Select Clock Element - resize by 20%

Paste and paste on the bottom right

Select Rose Element - resize by 20%

Image mirror and paste on the bottom right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 1 comments
Saturday, November 7, 2015

FAIRY DUST

2:56 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Zindy Nielsen for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Foxy's Designz called "Fairy Dust" which you can get by going here

Mask 5 from Melissaz Creationz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 7, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper layer below frame layer

Select Element 27 - resize by 55%

Paste and position above paper layer

Select Frame Element 4 - resize by 75%

Paste and position in the center of the canvas above frame 2

Select Element 11 - resize by 30%

Paste and position on the top left

Select Element 9 - resize by 65%

Image mirror and paste on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 29 - resize by 40%

Image mirror Free Rotate Right by 15% and paste on the bottom right

Select Element 14 - resize by 25%

Paste and position on the bottom right

Select Element 24 - resize by 45%

Paste and position on the bottom right

Select Element 8 - resize by 40%

Paste and position on the bottom left

Select Element 4 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 5 - resize by 20%

Paste and position on the bottom left

Select Element 15 - resize by 25%

Paste and position on the bottom left

Select Element 13 - resize by 35%

Paste and position on the bottom left

Select Element 10 - resize by 25%

Paste and position on the bottom left

Paste paper 1 on the canvas

Apply Mask 5 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments

AUTUMN HOOT

7:22 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Vadis for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Autumn Hoot" which you can get by going here

Floral Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 7, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete, select none

Move paper layer below window frame layer

Select Frame Element 2 - resize by 75%

Paste and position in the center of the canvas

Select Element 40 - resize by 30%

Paste and position on the bottom left on frame 2

Image duplicate and flip

Duplicate the flower element 2 more times and use mirror and flip feature until you have four around the frame

Select Element 1 - resize by 20%

Paste and position on the left side of frame where desired

Image duplicate mirror and reposition on the right side where desired

Select Element 83 - resize by 55%

Paste and position on the top where desired

Apply dropshadow of choice

Select Element 52 - resize by 20%

Image Free Rotate Right by 15% and paste on the top left

Select Element 50 - resize by 25%

Paste and position on the left side

Select Element 66 - resize by 30%

Paste and position on the right side

Select Element 58 - resize by 20%

Paste and position on the top right

Select Element 79 - resize by 22%

Paste and position on the right side

Select Element 28 - resize by 20%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 31 - resize by 25%

Paste and position on the bottom right

Select Element 80 - resize by 22%

Paste and position on the bottom right

Select Element 71 - resize by 30%

Image mirror and paste on the bottom right

Select Element 78 - resize by 20%

Paste and position on the bottom left

Select Element 60 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 20 - resize by 45%

Paste and position on the left side

Paste paper 8 on the canvas

Apply Floral Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, November 1, 2015

DREAMSTALKER

6:21 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Graphfreaks for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili Designz called "Claw Me" which you can get by going here

Mask 113 from Designs by Vaybz which you can find here

Mask 76 from Vix which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 1, 2015. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select House Element - resize by 55%

Paste and position in the center of the canvas

Select Tree 3 Element - resize by 45%

Paste and position on the top right below house element

Select Candles Element - resize by 20%

Paste and position on the top right below house element

Select Claw Marks Element - resize by 40%

Paste and position on the top of the house element

Select Blood Element - resize by 30%

Paste and position on top of the house element where desired

Select Deco 2 Element - resize by 25%

Image mirror and paste on the bottom right side

Select Tombstone Element - resize by 25%

Paste and position on the bottom right

Select Flower 4 Element - resize by 20%

Paste and position on the bottom right

Select Chain 2 Element - resize by 20%

Paste and position on the bottom right

Select Snake Element - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Sparkles 3 Element - resize by 20%

Paste and position on the bottom

Select Skeleton Element - resize by 30%

Paste and position on the bottom left

Select Knives Element - resize by 30%

Paste and position on the bottom left

Select Floppy Element - resize by 25%

Paste and position on the bottom left

Select Claw 3 Element - resize by 20%

Paste and position on the bottom left

Select Skull Element - resize by 25%

Paste and position on the bottom

Select Spider 3 Element - resize by 30%

Paste and paste on the bottom above skull element

Select Flower Element - resize by 15%

Paste and position on the bottom

Select Claws 3 Element - resize by 20%

Paste and position on the bottom

Select Sparkles 5 Element - resize by 30%

Paste and position on top right where desired

Paste paper 9 on canvas

Apply Mask 76 or mask of choice

Merge group and move to the bottom layer

Paste paper 12 on canvas

Apply Mask 113 or mask of choice

Merge group and move above 1st mask

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels:, | 0 comments
Subscribe to: Posts (Atom)

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







photo milliespspmadness_zps1b81d2e9.gif