Labels

I CT For

photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
6DkjWLG bellablinki nAJ6bKr

Blog Archive

Facebook

Sunday, July 31, 2016

PINK CHERRIES

4:00 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "Cherries Pink" which you can get by going here

Mask DMSK 328 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 31, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 32 - paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop close-up opacity down to 55%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 2 - resize by 45%

Paste and position on the top left

Select Element 36 - resize by 95%

Paste and position on the left side

Select Element 13 - resize by 55%

Paste and position on the top right

Select Element 41 - resize by 25%

Paste and position on the top right

Select Element 45 - resize by 30%

Paste and position on the top left

Select Element 22 - paste and position on the bottom

Select Element 7 - resize by 40%

Paste and position on the bottom right

Select Element 10 -resize by 30%

Paste and position on the bottom right

Select Element 25 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 47 - resize by 40%

Paste and position on the bottom right

Select Element 38 - resize by 40%

Paste and position on the right side

Select Element 11 - resize by 30%

Paste and position on the bottom left

Select Element 8 - resize by 30%

Paste and position on the left side

Select Element 29 - resize by 25%

Paste and position on the bottom left

Select Element 34 - resize by 20%

Paste and paste on the bottom left

Select Element 42 - resize by 25%

Paste and position on the bottom left

Select Element 12 - resize by 25%

Paste and position on the bottom left

Select Element 49 - resize by 30%

Paste and position on the bottom left

Select Element 50 - resize by 25%

Paste and position on the bottom

Select Element 27 - resize by 25%

Paste and position on the bottom

Select Element 39 - resize by 30%

Paste and position on the bottom

Paste paper 2 on canvas

Apply Mask 328 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, July 30, 2016

MY SWEET MERMAID

1:21 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Toriya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from called "My Sweet Mermaid" which you can get by going here

Mask 19 from Horseplay's Pasture which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 30, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 135 - resize by 55%

Paste and position in the center of the canvas

Select Frame Element 74 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Element 21 - resize by 65%

Paste and position on the top of the frame

Select Element 59 - resize by 20%

Paste and position on the top left

Select Element 54 - resize by 30%

Paste and position on the top where desired

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Element 84 - resize by 50%

Paste and position on the bottom right below frame layer

Select Element 50 - resize by 30%

Paste and position on the bottom left

Select Element 98 - resize by 65%

Paste and position on the bottom

Select Element 131 - resize by 30%

Paste and position on the right side

Select Element 51 - resize by 20%

Paste and position on the bottom right

Select Element 70 - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 65 - resize by 25%

Paste and position on the bottom right

Select Element 63 - resize by 22%

Paste and position on the bottom right

Select Element 64 - resize by 25%

Paste and position on the bottom right

Select Element 132 - resize by 15%

Paste and position on the left side

Select Element 43 - resize by 20%

Paste and position on the bottom left

Select Element 75 - resize by 20%

Paste and paste on the bottom left

Select Element 37 - resize by 15%

Paste and position on the bottom left

Select Element 36 - resize by 25%

Paste and position on the bottom left

Select Element 2 - resize by 10%

Paste and position on the bottom

Select Element 48 - resize by 15%

Paste and position in the center where desired

Select Element 20 - resize by 65%

Paste and position on in the center behind tube layer where desired

Select Element 41 - resize by 15%

Paste and position in the center behind tube layer where desired

Add new raster layer and flood-fill with color of choice

Apply Mask 19 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Monday, July 25, 2016

BEAUTY REMAINS

5:56 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Beauty Remains" which you can get by going here

Mask 15 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 25, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 74 - Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 13

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 68 - resize by 40%

Paste and position on the top center of the frame

Select Element 52 - resize by 15%

Paste and position on the top center of the frame

Select Element 67 - resize by 65%

Paste and position on the left side

Select Element 57 - resize by 40%

Paste and position on the left side

Select Element 14 - resize by 30%

Image Free Rotate Right by 15% and paste on the top left

Select Element 34 - resize by 50%

Paste and position on the right side

Select Element 58 - resize by 75%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 60 - resize by 45%

Paste and position on the right side

Select Element 29 - resize by 30%

Paste and position on the bottom right

Select Element 35 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 40 - resize by 30%

Paste and position on the bottom left

Select Element 56 - resize by 30%

Paste and position on the bottom left

Select Element 21 - resize by 25%

Paste and paste on the bottom left

Select Element 59 - resize by 25%

Paste and position on the bottom

Select Element 36 - resize by 25%

Paste and position on the bottom

Select Element 15 - resize by 20%

Paste and position on the bottom

Select Element 16 - resize by 35%

Paste and position on the bottom

Select Element 19 - resize by 30%

Paste and position on the bottom below tube layer

Paste paper 1 on canvas

Apply Mask 15 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, July 24, 2016

FUTURE'S PAST

9:02 AM | Posted by | Edit Post


Supplies needed:

I am using the stunning artwork from Enys Guerrero for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Gothic Inspirations called "Times of Future Past" which you can get by going here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 24, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Mask Element - resize by 65%

Paste and position in the center of the canvas

Select Frame 3 Element - resize by 65%

Pastea and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Ferns Element - resize by 55%

Paste and position on the top below frame layer

Select Cluster Element - resize by 50%

Paste and position on the top left

Select ShelfDeco Element - resize by 40%

Paste and position on the bottom right

Select WA11 Element - resize by 50%

Paste and position on the top right

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Bulbs Element - resize by 35%

Paste and position on the top of the SelfDeco Element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select PetalPile Element - resize by 55%

Paste and position on the bottom left

Select ClusterGrass Element - resize by 40%

Paste and position on the bottom left

Select SailBoat Element - resize by 20%

Paste and position on the bottom left

Select LooseBead Element - resize by 55%

Paste and position on the bottom left

Select Candle Element - resize by 20%

Paste and position on the bottom

Select Broach Element (sample kit) - resize by 20%

Paste and position on the bottom

Select Book Element - resize by 25%

Paste and paste on the bottom

Select MothsinFlight Element - resize by 25%

Paste and position on the bottom above book element

Select Key Element - resize by 15%

Paste and position on the bottom

Select Tub Element - resize by 30%

Paste and position on the bottom right

Select BrushedHeart Element - resize by 18%

Paste and position on the bottom right

Select Flower2 Element - resize by 20%

Paste and position on the bottom

Select Dragonfly Element - resize by 50%

Paste and position on the left side where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, July 23, 2016

STEAMPUNK NINA

11:50 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from ViNina for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Steampunk ViNina" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 23, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 100 - resize by 75%

Paste and position in the center of the canvas

Select Element 16 - resize by 45%

Paste and position on the left side of the canvas

Select Element 3 - resize by 50%

Paste and position on the top left

Select Frame Element 20 - resize by 50%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the top square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste close-up tube where desired and delete

Select none

Change close-up overlay

Apply dropshadow and move below frame layer

Select Element 5 - resize by 40%

Image Free Rotate Right by 45% and paste on the top left

Select Element 41 - resize by 40%

Paste and position in the center of the frame

Select Element 86 - resize by 55%

Paste and position on the left side

Select Element 47 - resize by 25%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 92 - resize by 15%

Paste and position on the bottom right

Select Element 18 - resize by 40%

Paste and position on the bottom right

Select Element 9 - resize by 15%

Paste and position on the bottom left

Select Element 10 - resize by 25%

Paste and position on the bottom left

Select Element 45 - resize by 30%

Paste and position on the bottom left

Select Element 66 - resize by 22%

Paste and paste on the bottom

Select Element 62 - resize by 12%

Paste and position on the bottom

Select Element 4 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 89 - resize by 20%

Paste and position on the bottom

Select Element 91 - resize by 40%

Paste and position on the bottom

Select Element 64 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 94 - resize by 55%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Monday, July 18, 2016

SUMMER STORM

7:14 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel Designs called "Striped Umbrella" which you can get by going here

Mask 42 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 18, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 18 - Paste and position in the center of the canvas

Select Element 46 - resize by 35%

Paste and position on the right side

Select Element 90 - resize by 45%

Paste and position on the top left

Select Element 29 - resize by 75%

Paste and position on the center of the canvas

Select Element 65 - resize by 75%

Paste and position on the bottom

Select Element 63-1 - resize by 40%

Paste and position on the left side

Select Element 55 - resize by 35%

Paste and position below the city element

Select Element 60 - resize by 35%

Paste and position on the bottom right

Select Element 76 - resize by 40%

Paste and position on the bottom right above box element

Select Element 42 - resize by 40%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 40 - resize by 35%

Paste and position on the bottom right

Select Element 96 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 94 - resize by 15%

Paste and position on the bottom right

Select Element 98 - resize by 20%

Paste and position on the bottom

Select Element 82 - resize by 20%

Paste and position on the bottom

Select Element 74 - resize by 20%

Paste and position on the bottom

Select Element 44 - resize by 25%

Image Free Rotate Left by 15% and paste on the left side

Select Element 1 - resize by 25%

Paste and position on the left side

Select Element 57-1 - resize by 25%

Paste and position on the bottom left

Select Element 51 - resize by 20%

Paste and position on the bottom left

Select Element 5 - resize by 20%

Paste and position on the bottom left

Select Element - resize by 20%

Paste and position on the in the center where desired

Select Element 46 - resize by 90%

Paste and position on the right side below tube layer where desired

Paste paper 10 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Monday, July 11, 2016

CYBER TOXIC PUNK

6:11 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FwTags called "Cyber Punk Toxic" which you can get by going here

Mask 27 from Millie which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 11, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 46 - resize by 85%

Paste and position on the top center of the canvas

Select Element 36 - resize by 40%

Image mirror and paste on the top left below city element

Select Element 22 - resize by 20%

Paste and position on the top right below city element

Select Element 50 - resize by 75%

Paste and position on the bottom

Select Element 5 - resize by 35%

Paste and position on the bottom center

Select Element 47 - resize by 30%

Paste and position on the bottom right

Select Element 29 - resize by 55%

Paste and position on the right side

Select Element 27 - resize by 35%

Paste and position on the bottom left

Select Element 13 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 3 - resize by 30%

Paste and position on the bottom

Select Element 23 - resize by 15%

Paste and position on the bottom

Select Element 58 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 39 - resize by 20%

Paste and position on the right side

Select Element 33 - resize by 15%

Paste and position on the bottom right

Select Element 11 - resize by 30%

Paste and paste on the bottom

Select Element 17 - resize by 20%

Paste and position on the bottom

Select Element 12 - resize by 25%

Paste and position on the bottom left

Select Element 49 - resize by 22%

Paste and position on the top left

Paste paper 5 on canvas

Apply Mask 27 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, July 10, 2016

SAILOR BLUE

6:07 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Navy Blue" which you can get by going here

Mask 328 which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 10, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 43 - resize by 55%

Paste and position on the top of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete, select none

Move paper layer below frame layer

Select Element 28 - resize by 30%

Paste and position on the top of the paper layer

Select Element 22 - resize by 25%

Paste and position on the top of the frame layer

Select Element 18 - resize by 40%

Image mirror and paste on the top right

Select Element 112 - resize by 30%

Paste and position on the top left

Select Element 24 - resize by 40%

Paste and position on the bottom left

Select Element 80 - resize by 25%

Image Free Rotate Left by 15% and paste on the right side

Select Element 42 - resize by 20%

Image Free Rotate Left by 15% and paste on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 35%

Image Free Rotate Right by 5% and paste on the bottom right

Select Element 69 - resize by 15%

Paste and position on the bottom right

Select Element 31 - resize by 30%

Paste and position on the bottom right

Select Element 49 - resize by 15%

Paste and position on the bottom

Select Element 32 - resize by 35%

Paste and position on the bottom left

Select Element 110 - resize by 20%

Paste and paste on the bottom left

Select Element 111 - resize by 40%

Paste and position on the bottom

Select Element 105 - resize by 15%

Paste and position on the bottom

Select Element 101 - resize by 12%

Paste and position on the bottom

Paste paper 7 on canvas

Apply Mask 328 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments

OCEANIA

8:26 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Misticheskaya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate "Oceania" which you can get by going here

Mask 14 from Melissaz Creationz which you can find here

Mask 126 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 10, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 4 - resize by 75%

Paste and position on the top of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Luminance (Legacy) and drop opacity to 80%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 18 - resize by 80%

Paste and position on the top of the frame

Select Element 36 - resize by 85%

Paste and position on the bottom of the frame layer

Select Element 17 - resize by 40%

Paste and position on the bottom left

Select Element 8 - resize by 40%

Paste and position on the bottom left

Select Element 37 - resize by 40%

Paste and position on the bottom right

Select Element 27 - paste and position on the bottom of the frame

Select Element 70 - resize by 30%

Paste and position on the top right

Select Element 11 - resize by 40%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 44 - resize by 25%

Paste and position on the left side

Select Element 35 - resize by 25%

Paste and position on the bottom left

Select Element 33 - resize by 30%

Paste and position on the bottom

Select Element 30 - resize by 20%

Paste and position on the bottom

Select Element 16 - resize by 15%

Paste and position on the bottom left

Select Element 66 - resize by 25%

Paste and paste on the bottom right

Select Element 69 - resize by 25%

Paste and position on the bottom right

Select Element 13 - resize by 15%

Paste and position on the bottom right

Select Element 28 - resize by 30%

Paste and position on the bottom right

Select Element 25 - resize by 25%

Paste and position on the bottom below tube layer

Select Element 6 - resize by 15%

Paste and position on the bottom below tube layer

Select Element 46 - resize by 15%

Paste and position on the right side

Add new raster layer and flood-fill with color of choice

Apply Mask 14 and merge group

Move the bottom layer

Paste paper 5 on canvas

Apply Mask 126 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, July 9, 2016

CHOLA WITH STYLE

8:35 AM | Posted by | Edit Post
Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs "Style Chola" which you can get by going here

Mask 34 from Becky which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 9, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 2 - paste and position on the top of the canvas where desired

Select Frame Element 25 - paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Screen and drop opacity to 75%

Apply dropshadow and merge down on paper layer

Move paper layer below frame layer

Select Element 43 - resize by 55%

Image mirror and paste and on the top right

Select Element 14 - resize by 75%

Paste and position on the bottom below frame layer

Select Element 28 - resize by 55%

Paste and position on the bottom right

Select Element 24 - resize by 30%

Paste and position on top of the car element where desired

Select Element 8 - resize by 45%

Paste and position on the bottom left

Select Element 17 - resize by 40%

Paste and position on the bottom left below tire element

Select Element 10 - Paste and position on the canvas where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 4 - resize by 20%

Paste and position on the right side

Select Element 33 - resize by 20%

Paste and position on the car element where desired

Select Element 11 - resize by 35%

Paste and position on the car element where desired

Select Element 50 - resize by 20%

Paste and position on the bottom right

Select Element 48 - resize by 15%

Paste and position on the bottom right

Select Element 35 - resize by 30%

Paste and paste on the bottom right

Select Element 32 - resize by 20%

Paste and position on the bottom

Select Element 18 - resize by 20%

Paste and position on the bottom left

Select Element 27 - resize by 40%

Paste and position on the bottom left below tube layer

Select Element 19 - resize by 20%

Paste and position on the bottom below tube layer

Select Element 21 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom right

Paste paper 1 on canvas

Apply Mask 34 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Monday, July 4, 2016

REBEL BEAUTY

2:53 PM | Posted by | Edit Post
Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Beauty Rebel" which you can get by going here

Mask 259 from Trese which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 4, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 78 - resize by 75%

Paste and position on the left side of the canvas

Image duplicate and mirror

Select Frame Element 74 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 49 - resize by 40%

Paste and position in the top center of the frame

Select Element 28 - resize by 30%

Paste and position on the top left

Image duplicate and mirror

Select Element 72 - resize by 20%

Paste and position on the top left

Image duplicate and mirror

Select Element 64 - resize by 25%

Paste and position on the bottom right

Select Element 24 - resize by 17%

Paste and position on the bottom right

Select Element 31 - resize by 40%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 90 - resize by 10%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 36 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 15 - resize by 40%

Paste and position on the bottom left

Select Element 85 - resize by 25%

Paste and position on the bottom left

Select Element 10 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 38 - Paste and position the bottom left

Select Element 18 - resize by 30%

Paste and position on the bottom left

Select Element 22 - resize by 30%

Paste and position on the bottom

Select Element 4 - resize by 40%

Paste and position on the bottom

Select Element 30 - resize by 12%

Paste and position on the left side

Select Element 81 - resize by 35%

Paste and position on the bottom below the tube layer

Select Element 82 - resize by 25%

Paste and position on the bottom

Select Element 9 - resize by 70%

Paste and position on the top left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 259 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments

SHADE OF BROWN

9:52 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designs by Joan called "Shade of Brown" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 4, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 44 - resize by 55%

Paste and position in the center of the canvas

Select Frame Element 42 - paste and position on the top left

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up to Hard light and drop opacity down to 65%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 14 - resize by 45%

Paste and position on the top right

Select Element 30 - resize by 40%

Paste and position on the bottom left

Select Element 33 - resize by 40%

Paste and position on the bottom of the frame

Select Element 55 - resize by 40%

Paste and position on the bottom right

Select Element 28 - resize by 25%

Image mirror and paste on the bottom

Select Element 1 - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 29 - resize by 30%

Paste and position on the bottom right

Select Element 31 - resize by 15%

Paste and position on the bottom right

Select Element 11 - resize by 25%

Paste and position on the bottom left

Select Element 56 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 16 - resize by 25%

Paste and position on the bottom left

Select Element 38 - resize by 25%

Paste and position on the bottom

Select Element 37 - resize by 22%

Paste and position on the bottom

Select Element 35 - resize by 30%

Paste and position on the stair element where desired

Select Element 25 - resize by 35%

Paste and position on the stair element where desired

Select Element 34 - resize by 20%

Paste and position on the bottom

Select Element 7 - resize by 20%

Paste and position on the bottom

Select Element 57 - resize by 25%

Image mirror and paste on the left side

Select Element 46 - resize by 40%

Paste and position on the left side

Paste paper 1 on canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, July 2, 2016

GOTHIC PRINCESS

7:28 AM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Vadis for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Kissing Kate called "Gothic Princess" which you can get by going here

Mask 20 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 2, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 1 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Element 18 - resize by 65%

Paste and position on the right side below the frame layer

Select Element 4 - resize by 65%

Paste and position on the right side

Select Element 9 - resize by 30%

Paste and position on the bottom right

Select Element 7 - resize by 20%

Paste and position on the bottom right

Select Element 37 - resize by 20%

Paste and position on the bottom right

Select Element 36 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 25%

Image Free Rotate Left by 15% and paste on the right side

Select Element 1 - resize by 40%

Paste and position on the left side below the tube layer

Select Element 33 - resize by 30%

Paste and position on the bottom left

Select Element 5 - resize by 25%

Paste and position on the bottom left

Select Element 30 - resize by 25%

Paste and position on the bottom left

Select Element 1 - resize by 65%

Paste and position on the bottom above the frame layer

Paste paper 1 on canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Friday, July 1, 2016

STARS AND STRIPES

5:35 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "Stars and Stripes" which you can get by going here

Patriotic Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on July 1, 2016. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 42 - paste and position in the center of the canvas

Select Frame Element 20 - resize by 75%

Paste and position in the center of the canvas

Image Free Rotate Right by 15%

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change Close-up tube to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 50 - resize by 75%

Paste and position on the canvas where desired

Select Element 22 - resize by 40%

Paste and position on the top left

Select Element 5 - resize by 50%

Paste and position on the top right

Apply Gradient Glow on fat default settings (glow width 3)

Select Element 27 - resize by 40%

Paste and position on the bottom right

Select Element 33 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 14 - resize by 25%

Paste and position on the bottom

Select Element 25 - resize by 22%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 9 - resize by 20%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 49 - resize by 20%

Paste and position on the bottom left

Select Element 28 - resize by 20%

Paste and position on the bottom left

Select Element 47 - resize by 40%

Paste and position on the bottom

Select Element 18 - resize by 40%

Paste and position on the bottom

Paste paper 5 on canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Subscribe to: Posts (Atom)

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







photo milliespspmadness_zps1b81d2e9.gif