Lee's Creationz: April 2017

Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Rieneke Designs called "Vampire 6" which you can get by going here

Mask 20 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 30, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 37

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper layer below frame layer

Select Element 15 - resize by 25%

Paste and position on the top left below frame layer

Select Element 28 - resize by 80%

Paste and position on the left side

Select Element 26 - resize by 35%

Paste and position on the top left

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element 38 - resize by 75%

Paste and position on the bottom left

Select Element 39 - resize by 75%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 52 - resize by 25%

Paste and position on the bottom left

Select Element 8 - resize by 45%

Paste and position on the bottom right

Image duplicate and mirror so that it's on the bottom left

Select Element 27 - resize by 45%

Paste and position on the bottom right

Select Element 35 - resize by 25%

Paste and position on the right side

Select Element 48 - resize by 15%

Paste and position on the bottom right

Select Element 22 - resize by 15%

Paste and paste on the bottom right

Select Element 20 - resize by 25%

Paste and position on the bottom left

Select Element 21 - resize by 20%

Paste and position on the bottom left

Select Element 55 - resize by 20%

Paste and position on the bottom left

Select Element 24 - resize by 55%

Paste and position on the left side

Paste paper 7 on the canvas

Apply Mask 20 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Thursday, April 27, 2017

HATERZ

6:19 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Arthur Crowe for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designs by Ali called "Haterz" which you can get by going here

Mask 4 from Butterfly Flutterby which you can find here

Plugins: Lokas 3D Shadow, Eyecandy 4000 - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 26, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 21 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change tube to Screen

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 6 - resize by 65%

Paste and position on the right side below the frame

Select Element 79 - resize by 55%

Paste and position on the top of the frame

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Element 49 - resize by 25%

Image Free Rotate Right by 15% and paste on the top left

Select Element 45 - resize by 40%

Paste and position on the bottom left

Select Element 7 - resize by 40%

Paste and position on the bottom left

Select Element 75 - resize by 30%

Image mirror and paste on the bottom right

Select Element 27 - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 48 - resize by 35%

Paste and position on the bottom right

Select Element 39 - resize by 15%

Paste and position on the bottom

Select Element 42 - resize by 40%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 61 - resize by 15%

Paste and position on the bottom

Select Element 71 - resize by 40%

Paste and position on the bottom

Select Element 52 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 44 - resize by 30%

Paste and position on the bottom left

Select Element 40 - resize by 40%

Paste and position on the bottom left

Select Element 15 - resize by 20%

Paste and position on the bottom

Paste paper 3 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Designs by Ali | 0 comments

Sunday, April 23, 2017

IRIDESCENT MERMAID

6:58 AM | Posted by Lee's Creationz | Edit Post

These Extra's were made using the amazing artwork by Julia Fox and kit by Chili's Designz called "Mermaids". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Labels:Chili Designz,Scraps N Company | 0 comments

Saturday, April 22, 2017

FAIRY DUST

6:29 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Fairy Dust" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 22, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center squares of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper layer below frame layer

Select Ground Element - resize by 45%

Paste and position on the bottom of the frame

Select House 2 Element - resize by 45%

Image mirror paste and position on the right side

Select Flutter 2 Element - resize by 30%

Paste and position on the top right

Select WA Element - resize by 30%

Paste and position on the top of the frame where desired

Select Flowers Element - resize by 30%

Image mirror and paste on the top left

Select Wand 3 Element - resize by 48%

Paste and position on the left side

Select Pillows Element - resize by 40%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Deco 4 Element - resize by 25%

Paste and position on the bottom right

Select Stones Element - resize by 40%

Paste and position on the bottom right

Select Wings 2 Element - resize by 25%

Paste and position on the bottom right

Select Pott Element - resize by 30%

Paste and position on the bottom below the tube layer

Select Snail Element - resize by 40%

Paste and position on the bottom

Select Mouse Element - resize by 35%

Paste and paste on the bottom

Select Deco 3 Element - resize by 25%

Paste and position on the bottom left

Paste paper 10 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz | 0 comments

Friday, April 21, 2017

GOTHIC INNOCENCE

7:56 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collection called "Gothic Innocence" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 21, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Mask Element 96 - resize by 55%

Paste and position in the center of the canvas

Select Frame Element 39 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 8

Paste paper 12

Select invert, delete, select none

Move paper layer below frame layer

Select Element 12 - resize by 40%

Paste and position on top of the paper layer where desired

Select Element 80 - resize by 20%

Paste and position on the top left above the paper layer

Select Element 21 - resize by 40%

Paste and position on the center of the paper layer

Select Element 19 - resize by 25%

Paste and position in the center where desired

Select Element 43 - resize by 65%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 55 - resize by 15%

Paste and position on the bottom right

Select Element 26 - resize by 15%

Paste and position on the bottom left

Select Element 82 - resize by 20%

Paste and position on the bottom left

Select Element 10 - resize by 15%

Paste and position on the bottom left

Select Element 67 - resize by 15%

Paste and position on the bottom

Select Element 78 - resize by 25%

Paste and paste on the bottom

Select Element 48 - resize by 20%

Paste and position on the bottom

Select Element 9 - resize by 15%

Paste and position on the bottom

Select Element 31 - resize by 25%

Image Free Rotate Left by 15% and paste on the top right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Bibi's Collections | 0 comments

Sunday, April 16, 2017

BUNNY LOVE

4:56 PM | Posted by Lee's Creationz | Edit Post

These Extra's were made using the amazing artwork by The Hunter and kit by Rieneke Designs called "Bonnie Kiss". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Labels:Scraps N Company | 0 comments

Saturday, April 15, 2017

BUNNY BUNNY

1:50 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Bunny Bunny 2 " which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 15, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 88 - resize by 48%

Paste and position in the center of the canvas

Select Element 89 - resize by 45%

Paste and position in the center of the canvas

Select Frame Element 55 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop opacity on tube down to 65%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 85 - resize by 15%

Image Free Rotate Right by 15% and paste on the top right

Select Element 31 - resize by 15%

Paste and position on the bottom

Select Element 43 - resize by 35%

Paste and position on the bottom of the frame

Select Element 41 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 62 - resize by 12%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 22 - resize by 20%

Paste and position on the bottom right

Select Element 52 - resize by 12%

Paste and position on the bottom right

Select Element 8 - resize by 40%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 10 - resize by 20%

Paste and position on the bottom

Select Element 75 - resize by 10%

Paste and position on the bottom

Select Element 14 - resize by 15%

Paste and paste on the bottom

Select Element 70 - resize by 15%

Paste and position on the bottom

Select Element 9 - resize by 20%

Paste and position on the bottom left

Select Element 16 - resize by 20%

Paste and position on the bottom left

Select Element 2 - resize by 8%

Image mirror and paste on the bottom left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Bibi's Collections,Scraps N Company | 0 comments

Sunday, April 9, 2017

STEAMPUNK JULIA

11:23 AM | Posted by Lee's Creationz | Edit Post

These Extra's were made using the amazing artwork by Julia Fox and kit by Kizzed by Kelz called "Steampunk Julia 3". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Labels:Extras,Scraps N Company | 0 comments

SQUEEZE

8:33 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from KiwiBG for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Squeeze" which you can get by going here

Grunge Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 9, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 7 - resize by 70%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper layer below frame layer

Select Skyline Element - resize by 32%

Paste and position on top of paper layer below the frame

Select Hearts Element - resize by 45%

Paste and position on the top right

Select Sparkles 5 Element - resize by 55%

Paste and position on the right side

Select Love WA Element - resize by 50%

Paste and position on the left side

Select Pearls Element - resize by 30%

Image Free Rotate Left by 15% and paste on the left side

Select Butterfly Element - resize by 40%

Paste and position on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Leaves Element - resize by 40%

Paste and position on the bottom right

Select Lips Element - resize by 65%

Paste and position on the bottom right

Select Flower 4 Element - resize by 30%

Paste and position on the bottom right

Select Perfume 2 Element - resize by 40%

Paste and position on the bottom right

Select Camera Element - resize by 40%

Paste and position on the bottom right

Select Pin Element - resize by 40%

Paste and paste on the bottom right

Select Gloss Element - resize by 55%

Paste and position on the bottom

Select Gloss 2 Element - resize by 30%

Paste and position on the bottom

Select Feather Element - resize by 40%

Paste and position on the bottom

Select Stars Element - resize by 75%

Paste and position on the bottom left

Select Corset Element - resize by 45%

Image Free Rotate Left by 15% and paste on the bottom left

Select Powder Element - resize by 45%

Paste and position on the bottom left

Select Flower 2 Element - resize by 25%

Paste and position on the bottom left

Select Key Element - resize by 25%

Paste and position on the bottom left

Select Flower Element - resize by 30%

Paste and position on the bottom

Select Rouge Element - resize by 35%

Paste and position on the bottom

Select Puppy Element - resize by 40%

Paste and position on the bottom

Select Sparkles 4 Element - resize by 40%

Paste and position on the bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz | 0 comments

Saturday, April 8, 2017

SWEET UNICORN

4:29 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Disturbed Scraps called "Sweet Unicorn" which you can get by going here

Sparkle Mask 145 from Aqua which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 8, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 73 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper layer below frame layer

Select Element 54 - resize by 80%

Paste and position on the top of the frame

Select Element 70 - resize by 40%

Paste and position on the right side of the paper layer

Select Element 77 - resize by 40%

Paste and position on the bottom of the paper layer where desired

Select Element 45 - resize by 65%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 15 - resize by 25%

Paste and position on the bottom right

Select Element 37 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 10 - resize by 45%

Paste and position on the bottom right

Select Element 17 - resize by 30%

Paste and position on the right side

Select Element 48 - resize by 25%

Paste and position on the right side

Select Element 46 - resize by 30%

Paste and paste on the bottom

Select Element 21 - resize by 25%

Paste and position on the bottom below tube layer

Select Element 1 - resize by 20%

Paste and position on the bottom

Select Element 11 - resize by 30%

Paste and position on the bottom left

Select Element 5 - resize by 20%

Paste and position on the bottom left

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 145 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Saturday, April 1, 2017

KILLER ALICE

11:59 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Lysisange sa for this tutorial which you can find here

Scrapkit: I am using a stunning Collab kit from Bibi's Collections called "Dark Alice" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 1, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 16 - paste and position in the center of the canvas

Apply Effects, Texture Effects, Mosaic - Antique with the following settings:

Select Element 48 - resize by 25%

Paste and position in the center where desired

Select Element 55 - resize by 45%

Paste and position on the top left

Select Element 77 - resize by 45%

Paste and position on the bottom

Select Element 79 - resize by 75%

Paste and position on the bottom

Select Element 72 - resize by 45%

Paste and position on the right side

Select Element 31 - resize by 25%

Image mirror and paste on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 28 - resize by 25%

Paste and position on the left side

Select Element 37 - resize by 25%

Paste and position on the top right

Select Element 57 - resize by 20%

Paste and position on the right side

Select Element 85 - resize by 15%

Paste and position on the bottom right

Select Element 14 - resize by 20%

Paste and position on the bottom right

Select Element 71 - resize by 15%

Paste and paste on the bottom

Select Element 43 - resize by 20%

Paste and position on the bottom left

Select Element 42 - resize by 25%

Paste and position on the bottom left

Select Element 86 - resize by 15%

Paste and position on the bottom left

Select Element 82 - resize by 25%

Paste and position on the bottom left

Select Element 13 - resize by 10%

Paste and position on the bottom

Select Element 83 - resize by

Paste and position on the top left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Bibi's Collections | 0 comments

B'TCH

8:52 AM | Posted by Lee's Creationz | Edit Post

These Extra's were made using the amazing artwork by The Hunter and kit by Kizzed by Kelz called "B'tch". You can purchase the kit here and the tube here

These extra's were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks

Labels:Extras,Scraps N Company | 0 comments

I LIKE SPRING

8:08 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Lysisange sa for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Lil Mz Brainstorm called "I Like the Spring" which you can get by going here

Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 1, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 21 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Drop opacity on tube down to 50%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Element 25 - resize by 65%

Image Free Rotate Left by 10% and paste on the top of the frame

Select Element 16 - resize by 40%

Image mirror paste and position on the bottom right

Select Element 8 - resize by 75%

Paste and position on the bottom

Select Element 39 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 98 - resize by 20%

Paste and position on the bottom left

Select Element 14 - resize by 20%

Paste and position on the bottom left

Select Element 40 - resize by 20%

Paste and position on the bottom right

Select Element 102 - resize by 20%

Paste and position on the bottom right

Select Element 9 - resize by 20%

Paste and position on the bottom

Select Element 103 - resize by 12%

Paste and paste on the bottom

Select Element 87 - resize by 20%

Image Free Rotate Left by 10% and paste on the bottom

Select Element 101 - resize by 20%

Image Free Rotate Left by 15% and paste on the left side

Paste paper 10 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

Labels

I CT For

Blog Archive

Facebook

LADY VAMP

HATERZ

IRIDESCENT MERMAID

FAIRY DUST

GOTHIC INNOCENCE

BUNNY LOVE

BUNNY BUNNY

STEAMPUNK JULIA

SQUEEZE

SWEET UNICORN

KILLER ALICE

B'TCH

I LIKE SPRING

Search

Followers

My Blinkies

Favorite Blogs