Lee's Creationz: October 2017

Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Pretty Witch" which you can get by going here

Mask 23 from RED which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 31, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 113 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Element 79 - resize by 30%

Paste and position on the top left

Select Element 15 - resize by 65%

Image mirror and paste on the left side

Select Element 11 - resize by 20%

Paste and position on the top left below house element

Select Element 12 - resize by 65%

Paste and position in the center below house element

Select Element 32 - resize by 30%

Paste and position on the bottom left

Select Element 38 - resize by 15%

Paste and position on the bottom left

Select Element 3 - resize by 20%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 44 - resize by 20%

Paste and position on the bottom left

Select Element 4 - resize by 25%

Paste and position on the bottom left

Select Element 49 - resize by 20%

Paste and position on the bottom

Select Element 30 - resize by 30%

Paste and position on the bottom

Select Element 106 - resize by 15%

Paste and position on the bottom

Select Element 96 - resize by 15%

Paste and paste on the bottom

Select Element 60 - resize by 15%

Paste and position on the bottom right

Select Element 104 - resize by 15%

Paste and position on the bottom right

Select Element 19 - resize by 30%

Paste and position on the bottom right

Paste paper 8 on the canvas

Apply Mask 23 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Lil Mz Brainstorm | 0 comments

Sunday, October 29, 2017

IZOMBIE

7:45 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Designz by Sue called "I'm A Zombie" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 29, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 12 - resize by 55%

Paste and position on the canvas

Select Frame Element 68 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Overlay

Apply dropshadow and merge down on paper layer

Move paper layer below frame layer

Select Element 35 - resize by 55%

Paste and position on the right side

Select Element 25 - resize by 55%

Paste and position on the right side

Select Element 17 - resize by 40%

Paste and position in the center where desired

Select Element 47 - resize by 50%

Paste and position on the bottom left

Select Element 54 - resize by 30%

Paste and position on the bottom left

Select Element 57 - resize by 40%

Paste and position toward the bottom
Apply Eyecandy Gradient Glow on fat default settings if desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 11 - resize by 25%

Paste and position on the bottom right

Select Element 39 - resize by 25%

Paste and position on the bottom

Select Element 31 - resize by 25%

Paste and position on the bottom

Select Element 32 - resize by 25%

Paste and position on the bottom

Select Element 22 - resize by 25%

Paste and position on the bottom

Select Element 34 - resize by 20%

Paste and paste on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

VAMPIRELLA

7:16 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Vampirella" which you can get by going here

Mask 27 from Splitz Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 29, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 17 - resize by 55%

Paste and position on the top left

Select Element 98 - resize by 55%

Paste and position on the top right

Select Element 6 - resize by 50%

Paste and position on the left side

Select Element 62 - resize by 40%

Paste and position on the right side

Select Element 43 - resize by 65%

Paste and position on the bottom

Select Element 9 - resize by 40%

Paste and position on the left side

Select Element 38 - resize by 75%

Paste and position on the bottom

Select Element 68 - resize by 20%

Paste and position on the right side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 51 - resize by 50%

Paste and position on the bottom right

Select Element 3 - resize by 15%

Paste and position on the right side

Select Element 28 - resize by 20%

Paste and position on the right side

Select Element 1 - resize by 10%

Paste and position in the center

Select Element 13 - resize by 15%

Paste and position on the bottom right

Select Element 34 - resize by 25%

Paste and paste on the bottom right

Select Element 103 - resize by 15%

Paste and position on the bottom

Select Element 80 - resize by 25%

Paste and position on the bottom

Select Element 31 - resize by 25%

Paste and position on the left side

Select Element 57 - resize by 20%

Paste and position on the bottom left

Select Element 36 - resize by 25%

Paste and position on the bottom left

Select Element 111 - resize by 20%

Paste and position on the bottom

Paste paper 9 on the canvas

Apply Mask 27 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Lil Mz Brainstorm | 0 comments

Saturday, October 28, 2017

MORTICYA

7:12 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Tagcatz called "Morticya" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 28, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 22 -

Paste and position in the center of the canvas

Select Frame Element 27 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Screen and drop opacity down to 45%

Apply dropshadow

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer and closeup below frame layer

Select Element 12 - resize by 40%

Paste and position on the top left

Select Element 59 - resize by 45%

Paste and position on the left side

Select Element 21 - resize by 20%

Paste and position on the top left below element 59

Select Element 13 - resize by 75%

Paste and position on the bottom

Select Element 30 - resize by 55%

Paste and position on the bottom

Select Element 56 - resize by 40%

Paste and position on the bottom left

Select Element 63 - resize by 40%

Paste and position on the left side

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 35 - resize by 30%

Paste and position on the bottom left

Select Element 46 - resize by 20%

Paste and position on bottom left

Select Element 31 - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 28 - resize by 40%

Paste and position on the bottom

Select Element 29 - resize by 20%

Paste and position on the bottom

Select Element 25 - resize by 25%

Paste and paste on the bottom

Select Element 76 - resize by 20%

Image Free Rotate Right by 15% and paste on the bottom

Select Element 49 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom

Select Element 55 - resize by 15%

Paste and position on the bottom

Select Element 39 - resize by 20%

Paste and position on the bottom

Select Element 47 - resize by 20%

Paste and position on the bottom

Select Element 7 - resize by 20%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

WICKED ROAD

3:34 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Wicked Road" which you can get by going here and here

Mask 11 from Horseplays' Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 28, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 118 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 11

Select invert, delete, select none

Move paper layer below frame layer

Select Element 117 - resize by 65%

Paste and position on the right side

Select Element 114 - resize by 40%

Paste and position on the right side

Select Element 76 - resize by 25%

Paste and position on the top left

Select Element 98 - resize by 85%

Paste and position on the bottom

Select Element 18 - resize by 40%

Paste and position on the bottom

Select Element 82 - resize by 40%

Paste and position on the bottom right

Select Element 92 - resize by 30%

Paste and position on the bottom

Select Element 87 - resize by 12%

Paste and position on the bottom

Select Element 27 - resize by 30%

Paste and position on the bottom

Select Element 89 - resize by 40%

Paste and position on the left side

Select Element 26 - resize by 15%

Paste and paste on the bottom left

Select Element 90 - resize by 20%

Paste and position on the bottom left

Select Element 109 - resize by 20%

Paste and position on the bottom

Select Element 97 - resize by 90%

Paste and position on the canvas where desired

Paste paper 4 on the canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Lil Mz Brainstorm | 0 comments

Sunday, October 22, 2017

DEMON WITHIN

6:38 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Natalia NZ for this tutorial which you can find here

Scrapkit: I am using a stunning kit from FWTags called "Demon Within" which you can get by going here

Mask 11 from Horseplays Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).
This tutorial was written by me on October 22, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 27 - resize by 65%

Paste and position in the center of the canvas

Select Element 71 - resize by 530%

Paste and position on the top left below element 27

Select Element 70 - resize by 25%

Paste and position on the top right

Select Element 6 - resize by 65%

Paste and position on the bottom

Select Element 42 - resize by 55%

Paste and position on the bottom

Select Element 20 - resize by 35%

Paste and position on the top below arch/gate element

Select Element 72 - resize by 20%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 65 - resize by 45%

Paste and position on the left side

Select Element 19 - resize by 15%

Paste and position on the bottom left

Select Element 28 - resize by 25%

Paste and position on the bottom left

Select Element 30 - resize by 20%

Paste and position on the bottom left

Select Element 38 - resize by 15%

Paste and position on the bottom left

Select Element 29 - resize by 25%

Paste and paste on the bottom right

Select Element 12 - resize by 20%

Paste and position on the bottom right

Select Element 26 - resize by 25%

Paste and position on the bottom right

Select Element 60 - resize by 20%

Paste and position on the bottom

Select Element 75 - resize by 15%

Paste and position on the bottom

Paste paper 6 on the canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Select your Freehand Selection tool and select around the center of the frame (Replace, Feather 0)

Paste close-up tube in the center of the selection

Select invert, delete, select none

Chage the closeup to Screen and drop opacity down to 80%

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

STEAMPUNK VAMPIRE

7:40 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designs called "Steampunk Vampire" which you can get by going here

Mask 11 from Horseplays Pasture which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 18, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 7 - resize by 65%

Paste and position in the center of the canvas

Select Frame Element 6 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Screen and drop opacity down to 50%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Balloon Element - resize by 25%

Paste and position on the top left

Select Lights Element - resize by 30%

Paste and position on the bottom left

Select Pillow Element - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom left

Select Key Element - resize by 25%

Paste and position on the bottom left

Select Gears Element - resize by 30%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Skulls Element - resize by 40%

Paste and position on the bottom right

Select Hat Element - resize by 30%

Paste and position on the bottom right

Select Book Element - resize by 40%

Paste and position on the bottom

Select Flower 6 Element - resize by 25%

Paste and position on the bottom

Select Glass Element - resize by 40%

Paste and position on the bottom left

Select Bat 2 Element - resize by 25%

Paste and paste on the left side

Select Blood 5 Element - resize by 30%

Paste and position on the left side

Select Spider Element - resize by 30%

Paste and position on the bottom

Select Blood 2 Element - resize by 30%

Paste and position on the bottom

Paste paper 10 on the canvas

Apply Mask 11 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz | 0 comments

Tuesday, October 17, 2017

WITCH TIME

6:06 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Toriya for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Witch Time" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 16, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 68 - resize by 55%

Paste and position in the center of the canvas

Select Frame Element 119 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 4

Select invert, delete, select none

Move paper layer below frame layer

Select Element 110 - resize by 50%

Paste and position on top of the paper layer

Select Element 43 - resize by 25%

Paste and position on the bottom where desired

Select Element 50 - resize by 45%

Paste and position on the right side

Select Element 51 - resize by 30%

Paste and position on the top right

Select Element 100 - resize by 50%

Paste and position on the top right

Select Element 29 - resize by 40%

Paste and position in the center

Select Element 81 - resize by 25%

Paste and position on the left side

Paste tube of choice where desired

Select Element 36 - resize by 12%

Paste and position on the top left

Select Element 74 - resize by 25%

Paste and position on bottom left

Select Element 70 - resize by 20%

Paste and position on the bottom right

Select Element 8 - resize by 20%

Paste and position on the bottom right

Select Element 80 - resize by 12%

Paste and position on the bottom right

Select Element 61 - resize by 20%

Paste and paste on the right side

Select Element 56 - resize by 12%

Paste and position on the bottom

Select Element 73 - resize by 20%

Paste and position on the bottom

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Bibi's Collections | 0 comments

Sunday, October 15, 2017

A GRAVE AFFAIR

7:15 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Vadis for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "A Grave Affair" which you can get by going here and here

Mask 21 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 15, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 66 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper layer below frame layer

Select Element 108 - resize by 75%

Paste and position on the top right

Select Element 87 - resize by 65%

Paste and position on the bottom

Select Element 90 - resize by 65%

Paste and position on the bottom right

Select Element 83 - resize by 25%

Paste and position on the bottom right

Select Element 105 - resize by 40%

Paste and position on the bottom

Select Element 118 - resize by 20%

Paste and position on the bottom

Select Element 7 - resize by 12%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 25%

Paste and position on the bottom left

Select Element 75 - resize by 30%

Paste and position on the bottom left

Select Element 73 - resize by 20%

Paste and position on the bottom right

Select Element 17 - resize by 40%

Paste and position on the top left

Select Element 104 - resize by 20%

Paste and position on the bottom

Paste paper 1 on the canvas

Apply Mask 21 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Lil Mz Brainstorm | 0 comments

DARKSIDE OF VOODOO

5:03 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Natalia NZ for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel Designs called "Darkside Voodoo" which you can get by going here

Mask 32 from Moonbeams and Spiderwebs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 15, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Overlay and drop opacity down to 60%

Apply dropshadow and merge down on paper layer

Move paper layer below frame layer

Select Element 15 - resize by 15%

Paste and position on the top of the frame

Select Element 4 - resize by 40%

Paste and position on the top left

Select Element 35 - resize by 50%

Paste and position on the bottom left

Select Element 3 - resize by 30%

Paste and position on the bottom right

Select Element 14 - resize by 25%

Paste and position on the bottom

Select Element 5 - resize by 15%

Paste and position on the bottom right

Select Element 17 - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 15 - resize by 15%

Paste and position on the bottom

Select Element 24 - resize by 25%

Paste and position on the bottom

Select Element 23 - resize by 15%

Paste and position on the bottom left

Select Element 41 - resize by 20%

Paste and position on the bottom left

Select Element 20 - resize by 20%

Paste and position on the bottom

Paste paper 5 on the canvas

Apply Mask 32 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps N Company | 0 comments

ANGEL OF DESIRE

2:33 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designs called "Angel of Desire" which you can get by going here

Mask 6 from Melissaz Creationz which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on October 15, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2 - resize by 65%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Chage the closeup to Luminance (Legacy) and drop opacity down to 80%

Apply dropshadow and merge down on paper layer

Effect, Texture Effects, Blinds (Width 3, Opactity 15, Horizontal and Light from left/top checked)

Move paper layer below frame layer

Select Bow 2 Element - resize by 30%

Paste and position on the top of the frame

Select Element 85 - resize by 25%

Paste and position on the top right below frame

Select Corner Element - resize by 40%

Paste and position on the top left

Select Halo Element - resize by 50%

Paste and position on the top

Select Leaves Element - resize by 20%

Paste and position on the bottom right

Select Harp Element - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Pears Element - resize by 25%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Deco Element - resize by 30%

Paste and position on the bottom

Select Button Element - resize by 50%

Paste and position on the bottom

Select Leaf Element - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom left

Select Rose 2 Element - resize by 25%

Paste and position on the bottom left

Select Kitten Element - resize by 25%

Paste and position on the bottom left

Select Key Element - resize by 25%

Paste and paste on the bottom

Select Butterfly Element - resize by 30%

Paste and position on the top left

Select Heart 2 Element - resize by 20%

Paste and position on the right side

Select Sparkles 4 Element - resize by 30%

Paste and position on the canvas where desired

Paste paper 10 on the canvas

Apply Mask 6 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz,Scraps N Company | 0 comments