Lee's Creationz: December 2019

Supplies needed:

Scrapkit: I am using a beautiful kit from Mariel Designs called "Blue Winter" which you can get by going here

Winter Mask 3 from Kristen which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 26, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 3 and paste on the canvas

Apply Mask 3 and merge group

Select Element 49 - resize by 30%

Paste and position on the top right

Select Element 65 - resize by 25%

Paste and positon on the top right above window frame

Select Frame 3 Element - resize by 40%

Paste and position on the top left

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up tube to Multiply and merge down on paper layer

Move paper layer below frame element

Select Element 54 - resize by 30%

Paste and position on the left side

Select Element 48 - resize by 40%

Paste and position on the bottom left

Select Element 104 - resize by 65%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 46 - resize by 20%

Image Free Rotate Right by 15% and paste on the top right

Select Element 86 - resize by 30%

Paste and position on the right side

Select Element 21 - resize by 40%

Paste and position on the right side

Select Element 24 - resize by 30%

Paste and position on the bottom right

Select Element 1 - resize by 25%

Paste and position on the bottom right

Select Element 19 - resize by 50%

Paste and paste on the bottom right

Select Element 91 - resize by 20%

Paste and position on the bottom right

Select Element 53 - resize by 20%

Paste and position on the right side

Select Element 78 - resize by 25%

Paste and position on the bottom left

Select Element 68 - resize by 20%

Paste and position on the bottom

Select Element 79 - resize by 20%

Paste and position on the bottom

Select Element 90 - resize by 15%

Paste and position on the bottom

Select Element 143 - resize by 18%

Paste and position on the bottom right

Select Element 33 - resize by 20%

Paste and position on the bottom

Select Element 85 - resize by 20%

Paste and position on the bottom

Select Element 59 - resize by 30%

Paste and position on the top left above frame

Select Element 7 - resize by 85%

Paste and position on the bottom left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Mariel Designs | 0 comments

Wednesday, December 25, 2019

I LOVE CHRISTMAS

8:14 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Mariel Designs for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Chachaz Creationz called "I Love Christmas" which you can get by going here

Mask 2 from Minja which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 25, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 1 and paste on the canvas

Apply Mask 1 and merge group

Select Frame Element 2 - resize by 75%

Paste and position on the right side

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Select Element 4 - resize by 75%

Paste and position on the top of the frame element

Select Element 25 - resize by 85%

Paste and position on the left side

Select Element 95 - resize by 55%

Paste and position on the left side

Select Element 47 - resize by 65%

Paste on the left side below tree element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 45 - resize by 30%

Paste and position on the bottom left

Select Element 83 - resize by 30%

Paste and position on the bottom left

Select Element 51 - resize by 25%

Paste and position on the bottom

Select Element 90 - resize by 25%

Paste and position on the bottom right

Select Element 69 - resize by 25%

Paste and position on the bottom right

Select Element 11 - resize by 30%

Paste and position on the bottom right

Select Element 8 - resize by 30%

Paste and paste on the bottom right

Select Element 61 - resize by 30%

Paste and position on the bottom right

Select Element 97 - resize by 25%

Paste and position on the bottom right

Select Element 70 - resize by 30%

Paste and position on the bottom right

Select Element 2 - resize by 25%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 29 - resize by 40%

Paste and position on the right side of the frame element

Apply Eyecandy Gradient Glow on fat default settings

Select Element 14 - resize by 75%

Paste and position on the canvas where desired

Select Element 74 - resize by 75%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chacha Creationz,Mariel Designs | 0 comments

Tuesday, December 24, 2019

PINK CHRISTMAS

3:56 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Vadis for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Happy Pumpkin Studios called "HP Kit 40 " which you can get by going Here, Here and Here

Mask 243 from Sophisticated Simone which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 24, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2 and paste on the canvas

Apply Mask 243 and merge group

Select Element 34 - resize by 50%

Paste and position in the center of the canvas

Select WA Element 2 - resize by 50%

Paste and position on the top left

Select Frame Element 9 - resize by 40%

Image Free Rotate Left by 15% and paste on the left side

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up tube to Hard Light and merge down on paper layer

Move paper layer below frame element

Select Element 1 - resize by 30%

Paste and position on the bottom left

Select Element 82 - resize by 40%

Paste and position on the bottom left

Select Element 44 - resize by 10%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 68 - resize by 15%

Paste and position on the bottom left

Select Element 134 - resize by 55%

Paste and position on the right side

Select Element 17 - resize by 30%

Paste and position on the right side above tree element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 92 - resize by 20%

Paste and position on the bottom right below tube layer

Select Element 14 - resize by 25%

Paste and position on the right side

Select Element 139 - resize by 20%

Paste and position on the bottom left

Select Element 87 - resize by 20%

Paste and position in the center

Select Element 3 - resize by 20%

Paste and position on the bottom below tube layer

Select Element 25 - resize by 30%

Paste and paste on the bottom

Select Element 116 - resize by 20%

Paste and position on the top

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Happy Pumpkin Studios | 0 comments

URBAN JUNGLE

7:48 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Nocturne for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Gothic Raven Designs called "Street Life" which you can get by going Here, Here and Here

Assorted Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 24, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2 and paste on the canvas

Apply Mask 1 and merge group

Select Element 76 - resize by 40%

Paste and position on the top left

Select Element 72 - resize by 40%

Paste and position on the top

Select Element 40 - resize by 40%

Paste and position on the top right

Select Element 92 - resize by 40%

Paste and position on the right side

Select Element 17 - resize by 40%

Paste and position on the bottom right

Select Element 62 - resize by 30%

Paste and position on the top left

Select Element 74 - resize by 25%

Image Free Rotate left by 15% and paste on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 19 - resize by 25%

Paste and position on the left side

Select Element 12 - resize by 40%

Image mirror and position on the left side

Select Element 42 - resize by 50%

Paste and position on the bottom left

Select Element 90 - resize by 30%

Paste and position on the bottom left

Select Element 112 - resize by 30%

Paste and position on the left side

Select Element 16 - resize by 30%

Image mirror paste and position on the bottom right

Select Element 14 - resize by 50%

Paste and position on the bottom

Select Element 28 - resize by 20%

Paste and position on the right side

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Gothic Raven Designs | 0 comments

Sunday, December 1, 2019

SASSY CHRISTMAS

8:31 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a beautiful kit from Chachaz Creationz called "Naughty Christmas" which you can get by going here

Mask 44 & 53 from Kopona which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 1, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2 and paste on the canvas

Apply Mask 44 and merge group

Reselect Paper 2 and paste on the canvas

Apply Mask 53 merge and group

Select Element 2 - resize by 40%

Paste and position on the top left

Select Element 51 - resize by 75%

Paste and position on the bottom left

Select Element 46 - resize by 40%

Paste and position on the left side

Select Element 33 - resize by 25%

Paste and position on the top left

Select Element 15 - resize by 30%

Paste and position on the bottom left

Select Element 65 - resize by 40%

Paste and paste on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 34 - resize by 30%

Paste and position on the right side

Select Element 36 - resize by 50%

Paste and position on the right side

Select Element 32 - resize by 40%

Paste and position on the right side

Select Element 70 - resize by 40%

Image mirror and paste on the top right

Select Element 23 - resize by 25%

Paste and position on top right

Select Element 31 - resize by 40%

Paste and paste on bottom below tube layer

Select Element 55 - resize by 40%

Paste and position on the bottom right

Select Element 7 - resize by 30%

Paste and position on the bottom right

Select Element 5 - resize by 25%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 57 - resize by 40%

Paste and position on the bottom right

Select Element 11 - resize by 30%

Paste and position on the top center

Select Element 25 -

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chacha Creationz | 0 comments

Labels

I CT For

Blog Archive

Facebook

BLUE WINTER

I LOVE CHRISTMAS

PINK CHRISTMAS

URBAN JUNGLE

SASSY CHRISTMAS

Search

Followers

My Blinkies

Favorite Blogs