Labels

I CT For

photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
6DkjWLG bellablinki nAJ6bKr

Blog Archive

Facebook

Tuesday, January 28, 2020

ROCK MUSIC

2:54 PM | Posted by | Edit Post


Supplies needed:

I am using the gorgeous artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit by Mariel Designs called "Music" which you can get by going here

Mask 853 from Rachel Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 26, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2-1 and paste on the canvas

Apply Mask 853 and merge group

Select Element 11 - resize by 55%

Paste and position on the top right

Select Element 31-1 - resize by 75%

Paste and positon on the top center

Select Element 50 - resize by 40%

Image Free Rotate Right by 15% and paste on the top left

Select Element 10-3 - resize by 50%

Paste and position on the top right

Select Element 43-2 - resize by 40%

Paste and position on the right side

Select Frame Element 5 - resize by 40%

Image Free Rotate Right by 15% and paste on the right side

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5-2

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change close-up tube to and to Hard Light

Move paper and close-up layer below frame element

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 40%

Paste and position on the bottom below tube layer

Select Element 119-1 - resize by 25%

Paste and position on the b0ttom right below tube layer

Select Element 121 - resize by 30%

Paste and position on the left side

Select Element 110-1 - resize by 40%

Paste and position on the left side

Select Element 70-2 - resize by 25%

Paste and paste on the bottom left

Select Element 14-1 - resize by 20%

Paste and position on the bottom left

Select Element 113 - resize by 45%

Paste and position on the left side below tube layer

Select Element 123 - resize by 25%

Paste and position on the top right

Select Element 95 - resize by 20%

Paste and position on the bottom

Select Element 29 -

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Sunday, January 12, 2020

PINK ICE

7:30 AM | Posted by | Edit Post

Supplies needed:

I am using the gorgeous artwork from Verymany for this tutorial which you can find here

Scrapkit: I am using a stunning kit by Gothic Raven Designs called "Pink Ice" which you can get by going Here

Winter Mask 3 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 12, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 5 and paste on the canvas

Apply Mask 3 and merge group

Select Element 55 - resize by 50%

Paste and position on the top right

Select Element 72 - resize by 20%

Paste and positon on the top right

Select Frame Element 7 - resize by 50%

Paste and position on the top left

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Duplicate close-up tube and change to Overlay

Select original close-up tube to and chage to Luminance (Legacy) layer

Move paper and close-up layers below frame element

Select Element 12 - resize by 40%

Image Free Rotate Right by 15% and paste on the top

Select Element 47 - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 31 - resize by 20%

Image mirror and paste on the bottom left

Select Element 64 - resize by 20%

Paste and position on the b0ttom left

Select Element 11 - resize by 15%

Paste and position on the bottom left

Select Element 18 - resize by 20%

Paste and position on the bottom left

Select Element 96 - resize by 25%

Paste and paste on the bottom

Select Element 35 - resize by 25%

Paste and position on the bottom

Select Element 50 - resize by 15%

Paste and position on the bottom left

Select Element 88 - resize by 25%

Paste and position on the bottom right

Select Element 62 - resize by 20%

Paste and position on the bottom right

Select Element 53 - resize by 25%

Paste and position on the bottom right

Select Element 78 - resize by 25%

Image Free Rotate Right by 15% and paste on the right side below tube layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Saturday, January 4, 2020

CAPRICE

11:43 AM | Posted by | Edit Post


Supplies needed:

I am using the gorgeous artwork from Selisan Al-Gaib for this tutorial which you can find here

Scrapkit: I am using a stunning kit by Chachaz Creationz called "Caprice" which you can get by going here

Mask 854 from Rachel Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 4, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 8 and paste on the canvas

Apply Mask 854 and merge group

Select Element 57 - resize by 30%

Paste and position on the top center

Select Element 17 - resize by 55%

Paste and positon on the top left

Select Element 83 - resize by 40%

Paste and position on the top right

Select Element 77 - resize by 10%

Paste and position on the bottom right

Select Element 100 - resize by 50%

Paste and position on the bottom left

Select Element 9 - resize by 50%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 30 - resize by 40%

Paste and position on the bottom below tube layer

Select Element 76 - resize by 40%

Paste and position on the b0ttom left

Select Element 8 - resize by 30%

Paste and position on the bottom

Select Element 16 - resize by 40%

Image mirror and paste on the bottom below tube layer

Select Element 75 - resize by 30%

Paste and position on the bottom

Select Element 74 - resize by 25%

Paste and paste on the bottom

Select Element 93 - resize by 40%

Paste and position on the bottom left

Select Element 62 - resize by 20%

Paste and position on the bottom left

Select Element 2 - resize by 30%

Paste and position on the bottom right

Select Element 70 - resize by 40%

Paste and position on the bottom right

Select Element 38 - resize by 30%

Paste and position on the bottom right

Select Element 84 - resize by 40%

Paste and position on the bottom right

Select Element 37 - resize by 25%

Paste and position on the bottom right

Select Element 40 - resize by 20%

Paste and position on the bottom right

Select Element 14 - resize by 30%

Paste and position on the bottom top left

Select Element 89 - resize by 40%

Paste and position on the top center above city element

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Labels: | 0 comments
Wednesday, January 1, 2020

NEW YEARS 2020

3:46 PM | Posted by | Edit Post

Supplies needed:

I am using the stunning artwork from Verymany for this tutorial which you can find here

Scrapkit: I am using a beautiful kit from Mariel Designs called "Cheryl" which you can get by going here

Mask 250 from Sophisticated Simone which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on January 1, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 7 and paste on the canvas

Apply Mask 250 and merge group

Select Element 7 - resize by 50%

Paste and position on the top left

Select Element 34 - resize by 65%

Paste and positon on the left side

Select Element 56 - resize by 40%

Paste and position on the top center

Select Frame 4 Element - resize by 40%

Paste and position in the center off to the left

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Duplicate close-up tube and change to Overlay

Select original close-up tube to and chage to Luminance (Legacy) layer

Move paper and close-up layers below frame element

Select Element 43 - resize by 10%

Paste and position on the top right

Select Element 9 - resize by 40%

Paste and position on the right side

Select Element 95 - resize by 40%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 25 - resize by 40%

Paste and position on the bottom left

Select Element 36 - resize by 25%

Paste and position on the left side

Select Element 69 - resize by 40%

Paste and position on the bottom below frame element

Select Element 33 - resize by 15%

Paste and position on the bottom left

Select Element 42 - resize by 30%

Paste and position on the bottom left

Select Element 32 - resize by 15%

Paste and paste on the bottom left

Select Element 45 - resize by 25%

Paste and position on the bottom left

Select Element 76 - resize by 25%

Paste and position on the bottom left

Select Element 8 - resize by 20%

Paste and position on the bottom

Select Element 41 - resize by 15%

Paste and position on the bottom

Select Element 14 - resize by 20%

Paste and position on the bottom

Select Element 79 - resize by 25%

Paste and position on the bottom

Select Element 2 - resize by 25%

Paste and position on the bottom right

Select Element 18 - resize by 20%

Paste and position on the bottom right

Select Element 29 - resize by 25%

Paste and position on the bottom right

Select Element 114 - resize by 30%

Paste and position on the bottom right

Select Element 70 - resize by 20%

Paste and position on the bottom right

Select Element 92 - resize by 40%

Image Free Rotate Left by 15% and paste on the top left

Apply Eyecandy Gradient Glow on fat default settings

Select Element 103 - resize by 55%

Paste and position on the bottom left

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels: | 0 comments
Subscribe to: Posts (Atom)

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







photo milliespspmadness_zps1b81d2e9.gif