Lee's Creationz: April 2020

Supplies needed:

I am using the gorgeous artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit by Mariel Designs called "Live Pin Up" which you can get by going here

Exclusive Oriental Mask 1 from Rachel which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 30, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2 and paste on the canvas

Apply Mask 1 and merge group

Select Element 72 - resize by 40%

Paste and position on the top left

Select Element 33 - resize by 50%

Paste and positon on the top center

Select Element 19 - resize by 65%

Paste and position on the top right

Select Element 41 - resize by 50%

Paste and position on the left side

Select Element 1 - resize by 40%

Paste and position on the top left

Select Element 4 - resize by 15%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 34 - resize by 15%

Paste and position on the left side

Select Element 96 - resize by 50%

Paste and position on the b0ttom left side

Select Element 98 - resize by 40%

Paste and position on the bottom left

Select Element 18 - resize by 40%

Paste and position on the bottom left below tube layer

Select Element 20 - resize by 25%

Paste and paste on the bottom left

Select Element 69 - resize by 15%

Paste and position on the bottom left

Select Element 15 - resize by 20%

Paste and position on the bottom left

Select Element 66 - resize by 20%

Paste and position on the top right

Select Element 38 - resize by 20%

Paste and position on the top right

Select Element 93 - resize by 30%

Paste and position on the bottom right

Select Element 11 - resize by 50%

Paste and position on the bottom right

Select Element 17 - resize by 40%

Paste and position on the bottom right below tube layer

Select Element 9 - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Element 99 - resize by 20%

Paste and position on the bottom right

Select Element 92 - resize by 20%

Paste and position on the bottom right

Select Element 31 - resize by 15%

Paste and position on the bottom right

Select Element 61 - resize by 30%

Paste and position on the bottom right

Select Element 81 - resize by 40%

Paste and position on the top right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Mariel Designs | 0 comments

Saturday, April 25, 2020

LOVELY GIRL

5:03 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a stunning kit by Happy Pumpkin Studios called "Lovely" which you can get by going here and here

Mask 9-2 from Kopona which you can find here

Spring Mask 2 from Dragonlfly Dreams which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 25, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 16 and paste on the canvas

Apply Mask 9-2 and merge group

Select Paper 20 and paste on the canvas

Apply Spring Mask 2 and merge group

Change Spring mask to Overlay

Select Frame Element 1 - resize by 65%

Paste and position on the top center

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Select Element 62 - resize by 45%

Paste and position in the center of the frame

Select invert, delete, select none

Select Element 70 - resize by 20%

Paste and positon on the top center

Select Element 56 - resize by 20%

Paste and position on the top left

Select Element 55 - resize by 25%

Paste and position on the bottom right

Select Element 92 - resize by 25%

Paste and position on the top left

Select Element 19 - resize by 30%

Paste and position on the left side

Select Element 2 - resize by 25%

Paste and position on the left side

Select Element 5 - resize by 25%

Paste and position on the bottom left

Select Element 93 - resize by 25%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 20%

Paste and position on the bottom left

Select Element 61 - resize by 20%

Paste and position on the b0ttom left

Select Element 16 - resize by 15%

Paste and position on the bottom left

Select Element 50 - resize by 15%

Paste and position on the bottom right

Select Element 100 - resize by 40%

Paste and paste on the bottom above tube layer

Select Element 101 - resize by 25%

Paste and position on the bottom right

Select Element 52 - resize by 25%

Paste and position on the bottom

Select Element 12 - resize by 15%

Paste and position on the bottom right

Select Element 112 - resize by 20%

Paste and position on the bottom right

Select Element 109 - resize by 50%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Happy Pumpkin Studios | 0 comments

Friday, April 24, 2020

COVID-19

11:00 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the gorgeous resale artwork from Chachaz Creationz for this tutorial which you can find here

Scrapkit: I am using a stunning freebie kit by Chili Designz called "Covid-19" which you can get by going here

Mask 119 from Designs by Vaybs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 24, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 2 and paste on the canvas

Apply Mask 119 and merge group

Select Covid Mask Element - resize by 75%

Paste and position in the center above mask layer

Select Covid 19 Frame 1 - resize by 30%

Paste and positon on the top right

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste close-up tube, select invert and delete

Select none

Change close-up tube to and to Hard Light

Move close-up layer below frame element

Select Greenery 2 Element - resize by 55%

Paste and position on the top left

Select Lungs Element - resize by 75%

Paste and position on the top left

Select Badge 2 Element - resize by 25%

Paste and position on the top right on the corner of the frame

Select Vira 7 Element - resize by 40%

Paste and position in the center of the canvas

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Brade 2 Element - resize by 40%

Paste and position on the bottom left

Select Mask Element - resize by 30%

Paste and position on the b0ttom left

Select WA5 Element - resize by 20%

Paste and position on the bottom left above mask element

Select Tape Element - resize by 30%

Paste and position on the bottom left

Select Soap 5 Element - resize by 30%

Paste and paste on the bottom left below tube layer

Select Steto Element - resize by 25%

Paste and position on the bottom left

Select Flower 6 Element - resize by 15%

Paste and position on the bottom left

Select Bandaid2 Element - resize by 20%

Paste and position on the bottom left

Select Test Element - resize by 20%

Paste and position on the bottom left

Select Butterfly Element - resize by 30%

Image Free Rotate by 15% and paste on the top right

Select Beat Element - resize by 30%

Paste and position on the right side

Select WA3 Element - resize by 40%

Paste and position on the bottom right

Select Soap 2 Element - resize by 25%

Paste and position on the bottom right

Select Flower 8 - resize by 30%

Paste and position on the bottom right

Select Brad Element - resize by 40%

Paste and position on the bottom right

Select Vira 2 Element - resize by 30%

Paste and position on the bottom right

Select Syringe 2 Element - resize by 25%

Paste and position on the bottom right

Select Thermo2 Element - resize by 25%

Paste and position on the bottom

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chacha Creationz,Chili Designz | 0 comments

Saturday, April 11, 2020

STAY HOME

10:05 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the gorgeous artwork from Mariel for this tutorial which you can free here here

Scrapkit: I am using a stunning kit by Mariel Designs called "Stay Home" which you can get free by going here

Grunge Mask 4 from Fecnikek which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 11, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 5 and paste on the canvas

Apply Mask 4 and merge group

Select Element 63 - resize by 45%

Paste and position on the top right

Select Element 75 - resize by 65%

Paste and positon on the top right

Select Element 2 - resize by 25%

Paste and position on the right side

Select Element 20 - resize by 40%

Paste and position on the bottom of the house element

Select Element 79 - resize by 65%

Paste and position on the top right

Select Element 32 - resize by 65%

Paste and position on the top right

Select Element 57 - resize by 30%

Paste and position on the top right

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 86 - resize by 40%

Paste and position on the top left below tube layer

Select Element 8 - resize by 25%

Paste and position on the b0ttom left side of tube layer

Select Element 24 - resize by 20%

Paste and position on the bottom left

Select Element 74 - resize by 25%

Paste and position on the bottom left

Select Element 26 - resize by 30%

Paste and paste on the bottom left

Select Element 60 - resize by 50%

Paste and position on the bottom above tube layer

Select Element 4 - resize by 50%

Paste and position on the bottom

Select Element 91 - resize by 25%

Paste and position on the bottom left

Select Element 71 - resize by 20%

Paste and position on the bottom left

Select Element 6 - resize by 20%

Paste and position on the left side

Select Element 27 - resize by 30%

Paste and position on the bottom right

Select Element 90 - resize by 30%

Image Free Rotate Left by 15% and paste on the bottom right

Select Element 66 - resize by 15%

Paste and position on the bottom right

Select Element 62 - resize by 15%

Paste and position on the bottom right

Select Element 11 - resize by 25%

Paste and position on the bottom right

Select Element 12 - resize by 20%

Paste and position on the bottom right

Select Element 18 - resize by 20%

Paste and position on the bottom right

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Mariel Designs | 0 comments

Sunday, April 5, 2020

CLOVER BUNNY

5:34 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the gorgeous artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit by Chili's Designz called "Clover Bunny Dress" which you can get by going here

Mask 3 from Arizona which you can find on the Misfits Blog here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 5, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 6 and paste on the canvas

Apply Mask 3 and merge group

Select Paper 10 and reapply mask 3

Change paper 10 to Overlay

Select Bokeh Element - resize by 55%

Paste and position in the center of the canvas

Select Greenery 2 Element - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the Greenery 2 Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste close-up tube in the center

Select invert, delete, select none

Change close-up tube to and to Hard Light

Move paper and close-up layer below greenery/ element

Duplicate close-up tube and change to overlay

Select original close-up tube layer and apply Gaussian blur on 4

Select Flower 5 Element - resize by 50%

Paste and positon on the top left

Select Butterflies Element - resize by 30%

Paste and position on the left side

Select Heart Element - resize by 30%

Paste and position on the bottom left

Select Basket 2 Element - resize by 30%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Lipstck Element - resize by 40%

Paste and position on the bottom left

Select Bunny 4 Element - resize by 40%

Paste and position on the b0ttom left

Select Eggs Element - resize by 30%

Paste and position on the bottom left

Select Butterfly Element - resize by 30%

Image Free Rotate Right by 15% and paste on the top right

Select Flower 10 Element - resize by 30%

Paste and paste on the right side

Select Flower 6 Element - resize by 30%

Paste and position on the right side

Select Deco Element - resize by 40%

Paste and position on the bottom right

Select Chick Element - resize by 30%

Paste and position on the bottom right

Select Egg 6 Element - resize by 30%

Image Free Rotate Right by 15% and paste on the bottom right

Select Flower 7 Element - resize by 30%

Paste and position on the bottom right

Select Muffin 2 Element - resize by 25%

Paste and position on the bottom right

Select Lamp 2 Element - resize by 30%

Paste and position on the bottom right

Select Rabbit 6 Element - resize by 25%

Paste and position on the bottom right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz | 0 comments

Lil Miss Bunny

6:27 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a stunning kit by Happy Pumpkin Studios called "HPS Kit 18" which you can get by going here or here

Set 48 Mask 2 from Rachel Designs which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on April 4, 2020. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Paper 5 and paste on the canvas

Apply Mask 2 and merge group

Select Frame Element 7 - resize by 70%

Paste and position on in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper below frame element

Select Element 145 - resize by 40%

Image mirror and paste on the top left

Select Element 123 - resize by 40%

Paste and positon on the top center

Select Element 108 - resize by 40%

Paste and position on the right side

Select Element 21 - resize by 40%

Paste and position on the right side

Select Element 71 - resize by 90%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 62 - resize by 30%

Paste and position on the left side

Select Element 67 - resize by 40%

Paste and position on the left side

Select Element 23 - resize by 15%

Paste and position on the bottom left

Select Element 38 - resize by 10%

Paste and position on the bottom left

Select Element 4 - resize by 30%

Paste and paste on the bottom left

Select Element 22 - resize by 15%

Paste and position on the bottom left

Select Element 79 - resize by 20%

Paste and position on the bottom left

Select Element 77 - resize by 10%

Paste and position on the bottom left

Select Element 31 - resize by 15%

Paste and position on the top left

Select Element 24 - resize by 20%

Paste and position on the right side

Select Element 86 - resize by 15%

Paste and position on the bottom right

Select Element 61 - resize by 20%

Paste and position on the bottom right

Select Element 64 - resize by 10%

Paste and position on the bottom right

Select Element 81 - resize by 15%

Paste and position on the top right

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Happy Pumpkin Studios | 0 comments

Labels

I CT For

Blog Archive

Facebook

ORIENTAL PIN UP

LOVELY GIRL

COVID-19

STAY HOME

CLOVER BUNNY

Lil Miss Bunny

Search

Followers

My Blinkies

Favorite Blogs