Lee's Creationz

Supplies needed:

Scrapkit: I am using a stunning kit from Lil Mz Brainstorm called "Fairy Sparkles" which you can get by going here

Mask 731 from Rachel which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 13, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 96 -

Paste and position in the center of the canvas

Select your magic wand tool and select the center of each square frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame element layer

Select Element 26 - resize by 75%

Paste and position in the center above paper layer

Select Element 45 - resize by 40%

Paste and position on the left side below frame layer

Select Element 17 - resize by 50%

Image Free Rotate Right by 15% and paste on top left

Select Element 18 - resize by 75%

Paste and position on the right side

Select Element 11 - resize by 65%

Paste and position on the bottom right

Select Element 81 - resize by 65%

Paste and position on the bottom left

Select Element 66 - resize by 55%

Paste and position on the bottom right

Select Element 65 - resize by 25%

Paste and position on the bottom center

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 59 - resize by 30%

Image mirror and paste on the bottom right

Select Element 38 - resize by 65%

Paste and position on the bottom right

Select Element 47 - resize by 15%

Paste and position on the bottom right

Select Element 12 - resize by 45%

Paste and position on the bottom left

Select Element 71 - resize by 15%

Image Free Rotate Left by 15% and paste on the bottom left

Select Element 41 - resize by 20%

Paste and position on the bottom left

Select Element 76 - resize by 40%

Paste and position on the bottom

Select Element 62 - resize by 20%

Paste and position on the bottom

Select Element 4 - resize by 20%

Paste and position on the right side

Select Element 20 - resize by 65%

Paste and position on the canvas where desired

Paste paper 7 on the canvas

Apply Mask 731 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:All Dolled Up Store | 0 comments

Saturday, May 11, 2019

DARK FANTASY

4:19 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Moon Vixen Designs called "Dark Fantasy" which you can get by going HERE AND HERE

Mask 17 from Vivienne which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 11, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 166 - resize by 55%

Image Free Rotate Right by 15% and paste in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete, select none

Move paper layer below frame element

Select Element 38 - resize by 55%

Paste and position on the left side

Select Element 110 - resize by 65%

Paste and position on the top right side

Select Element 29 - resize by 55%

Paste and position on the bottom right

Select Element 126 - resize by 30%

Image mirror and paste on the top right

Image Free Rotate Right by 15%

Select Element 8 - resize by 40%

Paste and position on the bottom left

Select Element 20 - resize by 40%

Paste and position on the left side

Apply Eyecandy Gradient Glow on fat default setting (glow width 3)

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 5 - resize by 30%

Paste and position on the bottom right

Select Element 43 - resize by 25%

Paste and position on the bottom right

Select Element 154 - resize by 15%

Paste and position on the bottom right

Select Element 88 - resize by 20%

Paste and position on the bottom

Select Element 56 - resize by 40%

Paste and paste on the bottom

Select Element 94 - resize by 15%

Paste and position on the bottom

Select Element 99 - resize by 20%

Paste and position on the bottom

Select Element 37 - resize by 30%

Paste and position on the bottom

Select Element 114 - resize by 15%

Paste and position on the bottom

Select Element 96 - resize by 15%

Paste and position on the bottom

Select Element 35 - resize by 20%

Paste and position on the bottom

Select Element 101 - resize by 15%

Paste and position on the bottom

Select Element 51 - resize by 30%

Paste and position on the canvas where desired

Paste paper 20 on canvas

Apply Mask 17 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Moon Vixen Designs | 0 comments

Friday, May 10, 2019

FAIRYLAND ALICE

1:37 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a stunning kit from Chacha Creationz called "Fairyland Alice" which you can get by going here

Set 25 Mask 3 from Rachel which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 10, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 44 - resize by 90%

Paste and position on the top left of canvas

Select Frame Element 65 -

Image Free Rotate Right by 15% and paste on the right side

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 9

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Change the closeup to Overlay

Apply dropshadow and merge down on paper layer

Move paper layer below frame element

Select Element 50 - resize by 85%

Paste and position on the top left below tree element

Select Element 35 -

Paste and position on the bottom

Select Element 78 - resize by 85%

Paste and position on the bottom left

Select Element 26 - resize by 40%

Paste and position on the bottom left

Select Element 58 - resize by 25%

Paste and position on the bottom left

Select Element 6 - resize by 20%

Paste and position on the bottom left

Select Element 71 - resize by 50%

Paste and position on the bottom right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 7 - resize by 30%

Paste and position on the bottom right

Select Element 85 - resize by 20%

Paste and position on the bottom right

Select Element 54 - resize by 25%

Paste and position on the bottom right

Select Element 40 - resize by 25%

Paste and position on the bottom right

Select Element 84 - resize by 20%

Paste and paste on the bottom right

Select Element 28 - resize by 20%

Paste and position on the bottom

Select Element 73 - resize by 20%

Paste and position on the bottom

Select Element 55 - resize by 20%

Paste and position on the bottom

Select Element 2 - resize by 20%

Paste and position on the bottom left

Select Element 64 - resize by 15%

Paste and position on the bottom left

Select Element 12 - resize by 55%

Paste and position on the left side

Select Element 17 - resize by 25%

Paste and position on the bottom

Select Element 15 - resize by 20%

Paste and position on the bottom left

Select Element 43 -

Paste and position on the canvas where desired

Paste paper 6 on canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chacha Creationz | 0 comments

Wednesday, May 8, 2019

QUEEN CROWN

3:49 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Queen Crown" which you can get by going here

Set 68 Mask 1 from Rocked by Rachel which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 8, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 7 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 10

Select invert, delete, select none

Move paper layer below frame element layer

Select Wreath Element - resize by 75%

Paste and position above frame layer

Select Castle 2 Element - resize by 65%

Paste and position on the top left side

Select Tower Element - resize by 40%

Paste and position on the right side below castle 2 element

Select Vine Element - resize by 30%

Paste and position on the left side

Select Clock Element - resize by 50%

Paste and position on the bottom right

Select Plat Element - resize by 50%

Paste and position on the bottom left

Select Flower 4 Element - resize by 25%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Pillow Element - resize by 25%

Paste and position on the bottom left

Select Deco 2 Element - resize by 70%

Paste and position on the bottom right and move to the bottom layer

Select Candle Element - resize by 30%

Paste and position on the bottom right

Select Book Element - resize by 20%

Paste and position on the bottom right

Select Crow Element - resize by 30%

Paste and paste on the bottom right

Select Crown 4 Element - resize by 20%

Paste and position on the bottom right

Select Rose Element - resize by 25%

Paste and position on the bottom

Select Goblet Element - resize by 25%

Paste and position on the bottom

Select Ring 2 Element - resize by 25%

Paste and position on the bottom

Select Pillows Element - resize by 25%

Paste and position on the bottom

Select Key Element - resize by 20%

Paste and position on the bottom

Select Sparkles 2 Element - resize by 55%

Paste and position on the canvas where desired

Paste paper 2 on canvas

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Chili Designz | 0 comments

Tuesday, May 7, 2019

RADYGA DESIGNS TAG SHOWOFF

12:32 PM | Posted by Lee's Creationz | Edit Post

These CT Tags were made using the amazing artwork by Radyga Designs. You can purchase the tube "Gill" HERE, HERE, HERE, HERE OR HERE

These tags were made by me and my own creativity. Please do not rip apart, destroy, alter them or claim them as your own. Thanks.

Labels:Radyga Designs | 0 comments

Monday, May 6, 2019

HAVING FUN

11:20 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a stunning kit from Magical Moments called "Have a Little Fun" which you can get by going here

Mask 35 from Vivienne which you can find here

Plugins: Lokas 3D Shadow, Eyecandy - Gradient Glow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 6, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 2- resize by 70%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete

Paste close-up tube on paper layer and delete

Select none

Apply Xero Radiance or filter of choice

Apply dropshadow and merge down on paper layer

Move paper layer below frame element

Select Element 54 - resize by 85%

Paste and position in the center above paper layer

Select Element 82 - resize by 55%

Image mirror and paste on the top left

Select Element 12 - resize by 40%

Paste and position on the bottom left

Select Element 3 - resize by 20%

Paste and position on the bottom left

Select Element 24 - resize by 65%

Image Free Rotate Right by 15% and paste on the bottom left

Select Element 77 - resize by 40%

Paste and position on the top left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 29 - resize by 25%

Paste and position on the bottom right

Apply Eyecand Gradient Glow on fat default settings (Glow width 3)

Select Element 70 - resize by 30%

Paste and position on the bottom right

Select Element 79 - resize by 20%

Image mirror and paste on the bottom right

Select Element 14 - resize by 15%

Paste and position on the bottom right

Select Element 31 - resize by 20%

Paste and paste on the bottom right

Select Element 13 - resize by 20%

Paste and position on the bottom

Select Element 4 - resize by 15%

Paste and position on the bottom

Select Element 72 - resize by 25%

Paste and position on the bottom

Select Element 5 - resize by 25%

Paste and position on the bottom

Select Element 53 - resize by 25%

Paste and position on the bottom

Select Element 67 - resize by 20%

Paste and position on the bottom

Select Element 71 - resize by 40%

Paste and position on the bottom

Select Element 49 - resize by 20%

Paste and position on the top right

Select Element 35 -

Paste and position on center of the canvas and move to the bottom layer

Select Element 51 - resize by 30%

Paste and position on the right side

Paste paper 3 on canvas

Apply Mask 35 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:All Dolled Up Store | 0 comments

Friday, May 3, 2019

ALOHA DREAMS

1:57 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

Scrapkit: I am using a kit from Happy Pumpkin Studios called "HPS Kit 27" which you can get by going HERE, HERE, OR HERE

Circle Template from Charmed Cowgirl which can be found here

Mask 41 from Vivienne which you can find here

Plugins used: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on May 3, 2019. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select the Black Rectangle layer

Select all, float, and defloat

Add new raster layer and flood-fill with color of choice

Select none

Hide/delete the orginal rectangle layer

Select Pink Rectangle layer

Select all, float, defloat

Paste paper 20

Select invert, delete, select none

Hide/delete original rectangle layer

Select Black Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Hide/delete original Circle layer

Select Pink Circle layer

Select all, float, defloat

Paste paper 19

Select invert, delete, select none

Hide/delete original circle layer

Select Medium Pink Circle 1 layer

Select all, float, defloat

Paste paper 24

Select invert, delete, select none

Delete/Hide original circle layer

Select Med. Pink Circle 2 layer and repeat above steps

Select Medium Circle outline 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original Line layer

Select Medium Circle outline 2 layer and repeat above steps

Select Darker Pink Circle1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Darker Pink Circle 2 layer and repeat above steps

Select Outline 1 layer

Select all, Float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide orginal outline layer

Select Ouline 2 layer and repeat above steps

Select Element 26 - resize by 65%

Paste and position in the center of the canvas

Select Element 116 - resize by 45%

Paste and position on the bottom between circle layers

Select Element 101 - resize by 40%

Paste and position on the left side

Select Element 8 - resize by 75%

Paste and position on the top left side

Select Element 105 - resize by 25%

Paste and position on the bottom right

Select Element 61 - resize by 40%

Paste and position on the bottom right

Select Element 9 - resize by 30%

Paste and position on the bottom right

Copy and paste tube of choice and position where desired

Apply Lokas 3D Shadow

Select Element 10 - resize by 25%

Paste and position on the bottom left side

Select Element 103 - resize by 25%

Paste and position on the bottom left

Select Element 48 - resize by 30%

Paste and position on bottom left

Select Element 2 - resize by 15%

Paste and position on the bottom left

Select Element 52 - resize by 80%

Paste and position on the bottom below tube layer

Select Element 118 - resize by 30%

Paste and position on the top right

Select Element 17 - resize by 40%

Paste and position on the top right

Select Element 32 - resize by 20%

Paste and position on the bottom right

Select Element 34 - resize by 40%

Paste and postion on the bottom right

Select Element 88 - resize by 20%

Paste and position on the bottom right

Select Element 5 - resize by 20%

Paste and position on the bottom right

Select Element 67 - resize by 20%

Paste and position on the bottom right

Select Element 1 - resize by 20%

Paste and position on the bottom

Select Element 23 - resize by 30%

Paste and position on the bottom

Select Element 148 - resize by 20%

Paste and position on the bottom

Select Element 45 - resize by 30%

Paste and position on the bottom

Select Element 39 - resize by 25%

Paste and position on the bottom

Select Element 22 - resize by 20%

Paste and position on the bottom

Select Element 113 - resize by 50%

Paste and position on the top

Paste paper 27 on canvas

Move layer to the bottom of the template

Apply Mask 41 or mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Happy Pumpkin Studios | 0 comments