I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Friday, August 31, 2012

BLOOD LUST




Supplies needed:

I am using the amazing art from EOS Sparks for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Amy Marie called "Blood Lust" which you can get by going here

WSL Mask 287 here

Plugins used: VanDerlee Snowflakes, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 31, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 700 x 650 blank canvas.

Select Element 51 and paste in the center of your canvas

Resize by 65%

Select Steps2 element and resize by 45%

Paste steps behind element 51 and mirror

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select Ground2 element and resize by 75%

Paste behind your tube and reposition it on the bottom

Select Ground element and resize by 75%

Paste under your ground2 element and position it on the bottom

Select GrassSkulls element and resize by 45%

Paste on top of element 51 and position it to your left

Duplicate and mirror element

Select Candle2 element and resize by 45%

Paste and position it under your grassskulls element to the left

Duplicate and mirror

Select moon element and resize by 40%

Paste under element 51 and reposition it on the top left

Select your Cloud element and paste/reposition on top of your moon layer

You can drop the opacity to about 70% on cloud like I did if you prefer

Select Element 38 and resize by 55%

Paste under grassskulls element and position it to the right

Select your Owl element and resize by 35%

Paste on top of your element 38 as shown

Select a New raster layer and flood-fill with color of choice and send to the bottom

Add a new raster layer on top and flood-fill with gradient of choice using your plant leaves texture as shown:

Take the Trees element and paste on top right of texture

Merge all three layers together

Apply WSL Mask 287

Merge group and move mask layer to the bottom

Stay selected on your mask layer

Select all, float, defloat

Add new raster layer and apply VanDerLee Snowflakes with the following settings:


Move this layer under your tube layer

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SEVEN SEAS




Supplies needed:

I am using the amazing art from Martin Abel for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Annaica called "Seven Seas" which you can get by going here

Template 135 from Leah which can be found here

Mask of choice

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 31, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Circle 2 layer

Select all, float, and defloat

Paste AP_Sevenseas_Paper5

Select invert, delete, select none

Delete/Hide original circle layer

Select AP_Sevenseas_Element58 frame

Paste on top of circle layer and resize by 60%

Reposition where desired over circle

Select Circle 3 layer and delete

Select Rectangle 5 layer

Select all, float, defloat

Paste AP_Sevenseas_Paper3

Select invert, delete, select none

Delete/Hide original rectanle layer

Select Frame 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Select Rectangle 7 layer

Select all, float, defloat

Paste AP_Sevenseas_paper12

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Frame 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original frame layer

Select Circle 8 layer

Select all, float, defloat

Paste AP_Sevenseas_paper4

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 9 layer

Select all, float, defloat

Paste AP_Sevenseas_paper9

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle 10 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original rectangle layer

Select Rectangle 12 layer

Repeat above steps/settings

Select Circle 11 layer

Select all, float, defloat

Paste AP_Sevenseas_paper4

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select AP_Sevenseas_element45 and resize about 75%

Paste under your tube and frame layer and reposition where you prefer

Select AP_Sevenseas_element44 and resize about 55%

Paste on top of the sand layer and position it on the bottom right

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Thursday, August 30, 2012

HOCUS POCUS




Supplies needed:

I am using the amazing art from KiwiFireStorm for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Toxic Desirez called "Witchy 1" which you can get by going here

Halloween Temp 2 from Kristen which can be found here

Mask 8 by Rieka Rafita here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 31, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Circle layer

Select all, float, and defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 0, Repeat 3)

Select none

Delete/Hide original circle layer

Select Glitter Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with a color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original circle layer

Select Circle Left layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of paper and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Circle Right layer

Repeat above steps/settings

If you want to add the weave on the close-up layers take your selection tool set on rectangle and apply weave with the following settings to each layer




Select Square Right 2

Select all, float, defloat

Paste Witchy1-Paper26

Select invert, delete, select none

Delete/Hide original square2 layer

Select Square Left 2 layer

Repeat above steps

Select all of the Doodles and delete

Select Kristin-Witchy1-House element - resize by 70%

Paste on top of center circle layer and reposition where you desire

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply RR Mask 8

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

WITCHY POO




Supplies needed:

I am using the amazing art from Jasmine Becket-Griffith for this tutorial, which you can find here

Scrapkit: I am using an amazing kit from Irish Bitch Designs called "Witchy Poo" which will be released soon, keep an eye out for it here

Trick or Treat Halloween Template 4 from Niqui which can be found here

Mask of choice

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 30, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Trama4 layer

Select all, float, and defloat

Selections, Modify, Contract by 4

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original square layer

Select Copia de Trama4 layer

Repeat above steps/settings

Select Trama2 layer

Select all, float, defloat

Selections, Modify, Contract by 4

Paste IBD_paper2

Select, invert, delete, select none

Select Trama2 layer again

Select all, float, defloat

Add a new raster layer and flood-fill with color of choice

Select none

Delete/Hide original Trama2 layer

Select Trama 6 layer

Select all, float, defloat

Selections, Modify, Contract by 4

Paste IBD_paper10

Select invert, delete, select none

Select Copia de Vector 1 layer

Repeat above steps

Select IBD_HauntedHouse element - resize 70%

Paste behind Circle layer and reposition to the right side

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Tuesday, August 28, 2012

LILAC BUTTERFLY




Supplies needed:

I am using the amazing art from Rossana Castellino for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Baby Cakes Scraps called "Anastasia" which you can get by going here

Template 108 from Pooker which can be found here

WSL Mask 291 here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 28, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select White Circle layer

Select all, float, and defloat

Paste bcs_paper_two

Select invert, delete, select none

Delete/Hide original circle layer

Select Navy Rectangle layer

Select all, float, defloat

Paste bcs_paper_one

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Brown Rectangle layer

Select all, float, defloat

Paste bcs_paper_eleven

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Black Rectangle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original rectangle layer

Select Teal Circle layer

Select all, float, defloat

Paste bcs_paper_fourteen

Select invert, delete, select none

Delete/Hide original circle layer

Select Wordart1 layer

Add new raster layer and flood-fill with color of choice

Go back and select the wordart layer again

Select all, float, defloat

Click back on the color layer we just filled

Select invert, delete, select none

Delete/Hide original wordart layer

Select Sienna Circle layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 7)

Select none

Delete/Hide original circle layer

Select Brown Circle1 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of paper and delete

Apply Xero Bad Dream at default settings

Change closeup to Hard Light and drop opacity down to 40%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Brown Circle2 layer

Repeat above steps/settings

Select Wordart2 layer

Repeat same steps that we did for Wordart1 layer

Select Navy Circle1 layer

Select all, float, defloat

Paste bcs_paper_four

Select invert, delete, select none

Delete/Hide original circle layer

Select Navy Circle2 layer

Repeat above steps

Select Teal Square1 layer

Select all, float, defloat

Paste bcs_paper_eight

Select invert, delete, select none

Delete/Hide original square layer

Select Teal Square2 layer

Repeat above steps

Select Lt. Teal Square 1 layer

Select all, float, defloat

Paste bcs_paper_thirteen

Select invert, delete, select none

Delete/Hide original square layer

Select Lt. Teal Square 2 layer

Repeat above steps

Select Butterflies layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 60%, Monochrome checked)

Delete/Hide original butterflies layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply DBV Mask 121

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

TOXIC LADY




Supplies needed:

I am using the amazing art from Arthur Crowe for this tutorial, which you can find here

Scrapkit: I am using a awesome kit from Rissa called "Toxic Lady" which you can get by going here

Template 91 from Pooker which can be found here

WSL Mask 250 here

Plugins used: PhotoEffex - Scanlines, Tramages - Tow the Line, Eyecandy 4000 - Glass, Eyecandy 4000- Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 27, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select RD_Frame03

Resize by 60% and rotate left by 15%

Reposition it where you desire

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 50%, Monochrome checked)

Select your magic wand and click in the center of each square on the frame while holding down the shift key

Add a new raster layer and flood fill with a gradient of choice (Linear style, Angle 45, Repeat 2)

Select none

Move Gradient layer under the frame

Select your magic wand and click on the 1st square in the frame

Select Modify, Expand by 2

Paste close up tube of choice on top of paper and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Repeat for the two remaining squares

Apply dropshadow and merge all close-ups down on top of gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Select Black Square layer

Select all, float, defloat

Paste RD_PP02

Select invert, delete, select none

Apply Eyecandy Glass with the rough cut settings shown below:



Delete/Hide original square layer

Select Square White Frame layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 65%, Monochrome checked)

Delete/Hide original frame layer

Select White Strip layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply PhotoEffex with the following settings:


Delete/Hide original strip layer

Select Dk Grey Circle 1 layer

Select all, float, defloat

Paste RD_PP01

Select invert, delete, select none

Apply Eyecandy 4000 Gradient Glow (Change Glow Width to 6)

Delete/Hide original circle layer

Select Dk Grey Circle2 layer

Repeat above steps/settings

Select White Rectangle layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Select Dk Grey Rectangle

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Tramages - Tow the Line with the following settings:


Delete/Hide original rectangle layer

Select Black Strip1 layer

Apply Photoeffex with the same settings

Select Black Strip2 layer

Apply Photoeffex with same settings

Select Greay Square1

Select all, float, defloat

Add new raster and flood-fill with color of choice

Select none

Apply Texture, Texture Effects, Weave (Gap size 3, Width 8, Opactity 6, Fill gaps checked)

Delete/Hide original square layer

Select Grey Square2 layer

Repeat above steps/settings

Select Lt. Grey Circle1 layer

Select all, float, defloat

Paste RD_PP03

Select invert, delete, select none

Delete/Hide original circle layer

Select Lt. Grey Circle2 layer

Repeat above steps/settings

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply WSL Mask 250

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, August 26, 2012

DARK GOTHIC





Supplies needed:

I am using the amazing art from Lidia Misfit for this tutorial, which you can find here

Scrapkit: I am using a gorgeous kit from Niqui's Designs called "Dark Gothic" which you can get by going here

Mask of Choice

Plugins used: Xero-Radiance, Alien Skin Xenofax 2 - Lightning, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 26, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open a new 700x650 blank canvas

Select nq-element55 frame layer and resize 90%

Paste on top of canvas and rotate right 20%

Select your magic want and click in the center of the frame

Select all, Modify, Expand by 4

Paste nq-paper11

Select invert, delete, select none

Move paper below the frame

Select the nq-element6 and paste on top of the frame layer

Reposition it to the right-side where desired

Select nq-element1 and paste below the paper layer

Select nq-element50 and paste below the gate element
Reposition on the left side where you desire

Select nq-element3 and paste on top of the gate 3 element - I resized my element by 88%

Select nq-element59 and paste on top of the frame layer

Resize by 40% and reposition where you desire

Select nq-element60

Paste on top of the gate layer and reposition it on the top right

Select your nq-element8 and paste it on top of your frame layer

Reposition it on the top right corner of the frame

Select the moon element60

Add a new raster layer and apply Alien Skin Xenofex Lightning with the following settings:



Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Saturday, August 25, 2012

WICKED WITCH





Supplies needed:

I am using the amazing art from Douglas Smith. This tube was only available at MPT and is no longer available.

Scrapkit: I am using an awesome kit from Sleek N Sassy Designs called "Wicked Witches" which you can get by going here

Halloween Template from Tina which can be found here

Mask of Choice

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 25, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select 2Rectangles layer

Select all, float, and defloat

Paste WW_Paper4

Select invert, delete, select none

Delete/Hide original rectangles layer

Select your Pixelfont2 layer

Add new raster layer and flood fill with color of choice

Go back and select the pixelfont2 layer again

Select all, float, defloat

Go back and select your raster color layer

Select invert, delete, select none

Delete/Hide original pixelfont layer

Select Rectangle 1 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient color of choice (Linear style, Angle 45, Repeat 7)

Hide/Delete original rectangle layer

Select ThinRectangle layer

Select all, float, defloat

Paste WW_Paper7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Pixelwords layer and delete

Select Quadrant1 layer

Select all, float, defloat

Paste WW_Paper19

Select invert, delete, select none

Delete/Hide original Quadrant layer

Repeat above Quadrant steps for Quadrant 2, 3, and 4 layers

Select WW_Element62

Paste on top and reposition to your liking

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

TEARFUL LOVE




Supplies needed:

I am using the amazing art from Skyscraps Pinup for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Alikas Scraps called "Tearful Love" which you can get by going here

Template 109 from Leah which can be found here

Plugins used: Mura Meister - Copies, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 25, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Words 1, 2, 3, and 4 Raster layers and delete

Select Rect 1 layer

Select all, float, and defloat

Paste as_paper03

Select invert, delete, select none

Delete/Hide original rect layer

Select your as98 element

Resize 16% and paste on top layer of as_paper03 rect layer

Apply Mura Meister Copies with the following settings:


Click back on your rect 1 layer

Select all, float, defloat

Go back and select your Mura Tiling layer

Select invert, delete, select none

Move below your Frame 1 layer

Select Rect 2 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient color of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of paper and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original rect layer

Select Frame 2 Raster layer

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Gradient Glass at default settings

Delete/Hide original frame layer

Select Rect 3 Raster layer

Select all, float, defloat

Repeat same steps/settings as for Rect 2

Delete/Hide original rect layer

Select Frame 3 layer

Repeat same steps/settings that we did for frame 2

Select Rect 4 layer

Select all, float, defloat

Paste as_paper06

Select invert, delete, select none

Delete/Hide original rect layer

Select Frame 4 layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Glass at default settings

Select Circle 1 layer

Select all, float, defloat

Paste as_paper15

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 2 layer

Select all, float, defloat

Paste as_paper15

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 3 layer

Select all, float, defloat

Paster as_paper01

Select invert, delete, select none

Delete/Hide original circle layer

Select Thin Circle layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Delete/Hide original circle layer

Select Square layer

Select all, float, defloat

Paste as_paper08

Select invert, delete, select none

Delete/Hide square layer

Select Rect 5 layer

Select all, float, defloat

Paste as_paper08

Select invert, delete, select none

Hide/Delete original rect layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Friday, August 24, 2012

AUTUMN MAGICK





Supplies needed:

I am using the amazing art from Elias for this tutorial, which you can find here

Scrapkit: I am using a gorgeous kit from Irish Bitch Designs called "Autumn Magick" which you can get by going here

Plugins used: L en K landksiteofwonders - Zitah, Penta - Jeans, Xero-Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on August 24, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open a blank canvas (650 x 250)

Add a new raster layer and flood fill with gradient of

choice (Linear style, Angle 45, Repeat 3)

Paste IBD_Paper1 from kit on top of gradient

Effects, Edge Effects, Enhance

Change paper to Luminence (Legancy) and drop opacity down to 80%

Merge down on top of gradient layer

Paste your close-up tube on top and reposition it to the left side

Change blend mode to Luminance (Legacy) or play with whatever setting looks best

Apply Xero Bad Dream at setting of choice

Apply Lokas 3D Shadow and drop opacity down to 50%

Image, duplicate, mirror

Merge both tube copies down to the paper layer

Apply L en K Landksiteofwonders Zitah with the following settings:


Copy and paste your tube of choice and position it in the center

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select bottom blank layer

Select all, Modify, Select Selection Borders (Both sides checked, Anti-alias checked, Border width 6)

Add new raster layer and flood fill with color of choice

Select none and move layer to the top

Select bottom blank layer again

Select all, Modify, Select Selection Borders change border width to 4

Again, add new raster layer and flood fill with gradient of choice

Move to the top

Apply Penta Jeans with the following settings:



Now take your Eclipse preset tool, set to vector (Line style: solid, size 5, foreground Color only, Pick a color that matches your tube)

Draw a circle around your center tube and position it where you like

Convert to raster layer and move under the borders we just made

Apply Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 60%, Monochrome checked)

Take your magic wand and select the center of the eclipse line

Select, Modify, Expand by 2

Paste IBD_Paper4

Select invert, delete

Move under your main tube layer

Change the paper to Luminance (Legacy) and drop opacity if you desire

I took IBD_Scatter and IBD_Scatter1 leaf element and resized/repositioned them in the center

Add any additional elements you like.

Add any dropshadows you like

Add copyright info, license number and name

Merge Visible and save as PNG

Avatar:



Open a new 150x150 image

Select all, float, defloat

Add new raster layer and flood fill with same gradient

that you used for the forum banner

Select none

Paste IBD_paper1 on top of gradient

Effects, Edge Effects, Enhance

Change paper to Luminence (Legancy) and drop opacity down to 80%

Merge down on top of gradient layer

Copy and paste your tube as a new layer and position as desired

Select bottom blank layer

Select all, Modify, Select Selection Borders (Both sides checked, Anti-alias checked, Border width 5)

Add new raster layer and flood fill with color of choice

Select none and move layer to the top

Select bottom blank layer again

Select all, Modify, Select Selection Borders change border width to 3

Again, add new raster layer and flood fill with gradient of choice

Move to the top

Apply Penta Jeans with the same settings that we did for the forum banner

Add copyright info, license number and name or initial

Merge Visible and save as PNG

You're done! Thanks for trying my tutorial!
Thursday, August 23, 2012

PETIT GOTH





Supplies needed:

Art and Scrapkit: I am using an amazing bundle pack from Kaci McVay called "Petit Goth" which you can get by going here

Template 188 from Tami which can be found here

DBV Grungy Mask 121 here

Plugins used: Tramages - Tow the Line, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do). This tutorial was written by me on August 23, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select "Hoodie" wordart layer and delete

Select Circle Raster 9 layer

Select all, float, and defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of paper and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original circle layer

Select Circle Frame Raster 12 layer

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Gradient Glass at default settings

Delete/Hide original frame layer

Select Rectangle Raster 6 layer

Select all, float, defloat

Paste paper p09

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square Raster 13 layer

Select all, float, defloat

Paste paper p05

Select invert, delete, select none

Apply Tramages - Tow the Line with the following settings:


Delete/Hide original square layer

Select Circle Raster 8 layer

Select all, float, defloat

Paste paper p05

Select invert, delete, select none

Apply Texture, Texture Effects, Weave (Gap size 3, Width 6, Opactity 6, Fill gaps checked)

Delete/Hide original circle layer

Select Rectangle Raster 3 layer

Select all, float, defloat

Paste paper p09

Select invert, delete, select none

Apply Tramages - Tow the Line with the following settings:


Delete/Hide original rectangle layer

Select Square Raster 4 layer

Select all, float, defloat

Paster paper p06

Select invert, delete, select none

Delete/Hide original square layer

Select Square Raster 5 layer

Select all, float, defloat

Paste bonus background paper

Select invert, delete, select none

Delete/Hide square layer

Select Circle Raster 7 layer

Select all, float, defloat

Paste paper p10

Select invert, delete, select none

Hide/Delete original circle layer

Select Rectangle Raster 10 layer

Select all, float, defloat

Paste paper p08

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 11 layer

Paste bonus background paper

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply DBV Mask 121

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, August 20, 2012

CRAZY LOVE




Supplies needed:

I am using the amazing art from Bonnie's Creations for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from AmyMarie called "EmoMarie" which you can get by going here

Template 18 from Rosa which can be found here

Gems mask 34 here

Plugins used: Eyecandy 4000 Glass, Xero-Radiance, Xero-Bad Dream, Penta - Color dotd, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 20, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Capa 11 and 12 heart layers and delete

Select Capa 10 wordart layer

Select all, float, and defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Gradient Glow (Glow width 3)

Delete/Hide original wordart layer

Select Capa 9 wordart layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Delete/Hide original wordart layer

Select Capa 8 wordart layer

Apply Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original wordart layer

Select Capa 7 heart layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Glass with the following settings:


Delete/Hide original heart layer

Select Capa 6 raster layer

Apply Noise with same settings from above

Delete/Hide original heart layer

Select Capa 4 Raster layer

Select all, float, defloat

Paste paper pp013

Select invert, delete, select none

Delete/Hide original circle layer

Select Capa 5 dotted line layer

Add new raster layer and flood fill with color of choice

Select Capa 5 layer again

Select all, float, defloat, select invert

Select color layer you just filled and delete

Select none

Delete original dotted line layer

Select Capa 3 Square layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Paste close up tube of choice on top of paper and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original square layer

Select Capa 2 Square raster layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice

Select none

Apply Penta Jeans at default setting

Delete/Hide original square layer

Select Capa 1 Oval layer

Apply Alien Skin Xenofax 2 - Rip Open with these settings (you can change the colors to whatever you desire):


Now take your magic want and click in the center of your oval

Apply Effect, Texture Effects, Weave (Gap Size 3, Width 7, Opactity 6, Fill gaps checked)

Select none

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Gem Mask 34

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, August 19, 2012

DARK PRINCESS




Supplies needed:

I am using the amazing art from Barbara Jensen for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Sleek N Sassy Designs called "Doyle" which you can get by going here

Template 95 from Scraps Rebellion which can be found here

Mask of choice

Plugins used: Eyecandy 4000 Glass, Eyecandy 4000 Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 19, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select the Circle Raster 3 layer

Select all, float, and defloat

Paste paper D_paper6 - resize 75%

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle Frame Raster 4 layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 50%, Monochrome checked)

Apply Eyecandy Glass with the follow settings:


Select Square Raster 9 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient color of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of paper and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 50%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original square layer

Select Square Copy of Raster 9 layer

Repeat above steps/settings

Select Square Raster 8 layer

Select all, float, defloat

Paste paper D_paper11 (I flipped the paper before pasting)

Select invert, delete, select none

Delete/Hide square layer

Select Square Raster 10 layer

Repeat above steps

Select Circle Raster 7 layer

Select all, float, defloat

Paste paper D_paper5

Select invert, delete, select none

You can leave the color or colorize the paper to these settings (Adjust, Hue and Saturation, Colorize) :


Apply Eyecandy Gradient Glow at medium default settings

Select Copy of Circle Raster 7

Repeat above steps/settings

Select Rectangle Raster 6 layer

Select all float, defloat

Paste Paper D_paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle Raster 5 layer

Select all, float, defloat

Paste Paper D_paper 1 (reposition if desired)

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Copy of Raster 5 layer

Repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Thursday, August 16, 2012

SWEET CANDY




Supplies needed:

I am using the amazing art from Celinart Pinup for this tutorial, which you can find here

Scrapkit: I am using a kit from Scrapz N Pleasure called "Sweet Candy" which you can get by going here

Little Bit of Heaven Template from Dee which can be found here

Mask of choice

Plugins used: Eyecandy 4000 Gradiant Glass, Eyecandy 4000 Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 16, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select the Wild Side wordart layer

Select all, float, and defloat

Add new raster layer and flood fill with color of choice

Select none

Delete/Hide original wordart layer

Select the small words layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Apply Eyecandy Gradient Glow on fat default settings

Select none

Delete/Hide original wordart layer

Select Heaven wordart layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Glass with these settings:

Delete/Hide original wordart layer

Select Center Frame Bg layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of paper and delete

Apply Xero Bad Dream at default settings

Change closeup to Hard Light

Drop the opacity on close-ups down to about 45%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Hide/Delete original center frame layer

Select Center frame layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Apply Eyecandy glass with same setting as above

Delete/Hide orginal frame layer

Select Right Frame Bg

Repeat above steps/settings that we did for Center Frame BG layer

Select Right Frame layer

Repeat above steps/settings that we did for Center Frame layer

Select Left Frame BG layer

Repeat above steps that we did for other frames

Select Left frame layer

Repeat above

Select Top Strip layer

Select all, float, defloat

Paste paper snp-candy-papers03

Select invert, delete, select none

Delete/Hide original strip layer

Select bottom dotted circle and delete

Select small lt blue circle we are going to delete in a minute

Select snp-candy-elements43

Resize 30% and paste/reposition on top of lt blue circle

Delete/Hide lt blue circle

Select top dotted circle and delete

Select small dark blue circle and repeat same steps for lt blue circle

Select Bottom Strip layer

Select all, float, defloat

Paste paper snp-candy-papers03

Select invert, delete, select none

Delete/Hide original strip layer

Select Left Blue Square layer

Select all, float, defloat

Paste paper snp-candy-papers01

Select invert, delete, select none

Delete/Hide original square layer

Select Blue Oval layer

Select all, float, defloat

Paste paper snp-candy-papers05

Select invert, delete, select none

Delete/Hide original oval layer

Select Grey Circle layer

Select all, float, defloat

Paste paper snp-candy-papers04

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select Text tool and type words of choice

Convert to Raster layer

Apply Eyecandy 4000 Glass at default settings

Apply Eyecandy Gradient Glow with colors of choice (Glow Width 4, Fat default setting)

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, August 15, 2012

MELANCHOLY LOVE





Supplies needed:

I am using the amazing art from Deborah Grieves for this tutorial, which you can find here

Scrapkit: I am using a kit from Wicked Princess Scraps called "Melancholy Love" which you can get by going here

Gems Mask 70 here

Plugins used: Eyecandy 4000 Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 8, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 700 blank canvas.

Select the WP_ML_Stainglass element and paste in the center of the canvas

Resize element 80%

Use your Selection Tool set on Rectangle (Line Width set at 5)

Draw a rectangle on out on the top left corner

Convert to raster and postion under your stained glass element

Duplicate Image, mirror and flip

You should have something that looks like this:


Take your magic wand and click in the center of the top left rectangle (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand by 2

Paste Paper WP_ML_PP17 - resize 75% and reposition

Select invert, delete

Paste your close-up tube on top of paper and delete

Select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 50%

Apply dropshadow and merge down on top of paper

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Repeat the above steps for the bottom rectangle

Select your WP_ML_Heartframe element and paste behind your stained glass element

Select WP_ML_Windowframe element - resize 45%

Paste and reposition on top of Top Rectangle layer with close-up

Select WP_ML_Graystairs element - resize 65% and paste on top of Stain glass layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select Text tool and type words of choice

Convert to Raster layer

Apply Eyecandy 4000 Glass at default settings

Apply Eyecandy Gradient Glow with colors of choice (Glow Width 4, Fat default setting)

Select new raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Gem Mask 70

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

PRETTY IN PINK




Supplies needed:

I am using the amazing art from Misticheskaya for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Freeks Creations called "Pretty In Pink" which you can only get here

Template 184 from Kristen which can be found here

Mask of choice

Plugins used: Xero - Fritillary, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 14, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select the Black Circle layer and delete

Select FC_PrettyInPink_E8 frame element

Paste on top of where circle should have been and repostion to where you desire

Select you Magic Wand and click in the center of frame (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand 6

Paste Paper FC_PrettyInPink_P7

Select invert, delete, select none

Move below frame layer

Apply Xero - Fritillary with following settings:


Select Round Rectangle layer

Select all, float, and defloat

Paste Paper FC_PrettyInPink_P8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Top Rectangle layer

Select all, float, defloat

Paste Paper FC_PrettyInPink_P4

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Bottom Rectangle layer

Repeat above steps

Select Top Square layer

Select all, float, defloat

Paste Paper FC_PrettyInPink_P13

Select invert, delete, select none

Delete/Hide original square layer

Select Bottom Square layer

Repeat above steps

Select Top Circle layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient

Select invert, delete, select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Apply Effects, Texture Effects, Blinds (Width 2, Opacity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Bottom Circle layer

Repeat above steps/settings

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BIG GIRL TUTORIAL




Supplies needed:

I am using the amazing art from Celine Pinup for this tutorial, which you can find here

Scrapkit: I am using a kit from Desirena Designs called "Emotional" which you can get by going here

Template 1 from Tonya and Deb Collab which can be found here

Mask of choice

Plugins used: PhotoEffex - Scanlines, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 14, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select the Rectangle layer

Select all, float, and defloat

Paste Paper DD_E_P3 - resize 85%

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 1 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient

Select invert, delete, select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of paper

Select Circle 2 layer

Select all, float, defloat

Paste Paper DD_E_P7

Select invert, delete, select none

Delete/Hide orginal circle layer

Select Circle Frame layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original frame layer

Select Circle 1 layer

Select all, float, defloat

Paste Paper DD_E_P2

Select invert, delete, select none

Delete/Hide original circle layer

Select Shape 2 layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice

Select none

Apply PhotoEffex - Scanlines with following settings:


Delete/Hide original shape layer

Select Shape 1 layer

Repeat above steps/settings

Select Half Shape 2 layer

Select all, float, defloat

Paste Paper DD_E_P4

Select invert, delete, select none

Delete/Hide original half shape

Select Half Shape 1 layer

Repeat above steps

Select Wordart by Tonya

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Delete/Hide original wordart layer

Select Wordart Background layer

Repeat above steps and add noise if desired

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, August 12, 2012

PUNK THE BALLET


Supplies needed:

I am using the artwork from Sirina's Box for this tutorial, which you can find here

Scrapkit: I am using a kit from Tamie called "Black Swan" which you can find here

Template 180 from Tamie which can be found here

Mask of choice

Plugins used: VM Extravaganza - Transmission, Eyecandy 4000 - Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on August 12, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select the Circle Raster 9 layer

Select all, float, and defloat

Add a new raster layer and flood fill with color or gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close up tube of choice on top of gradient layer and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 75%

Apply dropshadow

Merge close-up down to gradient layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 15, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select the Raster 10 Frame layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Eyecandy 4000 Glass at default settings

Delete/Hide original frame layer

Select Square Raster 3 layer

Select all, float, defloat

Paste Paper 6

Select invert, delete, select none

Delete/Hide orginal square layer

Select Rectangly Raster 4 layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply VM Extravaganza - Transmission with the following settings:


Delete/Hide originial rectangle layer

Select Copy of Raster 4 layer

Repeat above steps/settings

Select Rectangle Raster 5 layer

Select all, float, defloat

Paste Paper 11

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Copy of Raster 5 layer

Repeat above steps

Select Rectangle Raster 2 layer

Select all, float, defloat

Add new raster layer and flood fill with color of choice

Select none

Apply Effects, Texture Effects, Weave (Gap size 2, Width 6, Opacity 15, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original rectangle layer

Select Copy of Raster 2 layer

Repeat above steps/settings

Select Circle Raster 8 layer

Select all, float, defloat

Paste Paper 10

Select invert, delete, select none

Delete/Hide original circle layer

Select Copy of Raster 8 layer

Repeat above steps

Select Circle Raster 7 layer

Select all, float, defloat

Paste Paper 12

Select invert, delete, select none

Delete/Hide original circle layer

Select Rectangle Raster 6 layer

Select all, float, defloat

Paste Paper 1

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs




Scraps N   Company



 photo   HPDDesignerBlinkie_zpsf8d76cb6.gif


 photo milliespspmadness_zps1b81d2e9.gif


 photo wcblinkie_zpsksfxotqd.gif