I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Blog Archive

Facebook

Monday, September 30, 2013

DARK SECRETS




Supplies needed:

I am using the amazing art from Anna Marine for for this tutorial, which you can find here

Scrapkit: I am using a wicked matching kit from Ladyhawwk Designs "Anna Marine 41-3" which you can get by going here

Mask 400 from Vix which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 30, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 and paste in the center of the canvas

Resize by 90%

Select your magic wand tool and click in the center of the Frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete,

Paste a close-up tube of choice on the top of paper where desired and delete, select none

Change close-up to Luminance (Legacy)

Apply Bad Dream on default settings of choice

Drop opacity on close-up down to 80%

Apply dropshadow and merge tube down on top of paper layer

Move paper layer below frame

Select Wordart Element - resize by 50%

Paste on top left where desired

Apply Eyecandy Gradient Glow on fat default settings

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 5 - resize by 50%

Paste and position on bottom right

Select Element 13 - resize by 15%

Image mirror and paste on bottom right

Select Element 19 - resize by 35%

Image Free Rotate Left by 10% and paste on bottom right

Select Element 20 - resize by 40%

Paste and position on bottom left

Select Element 7 - resize by 20%

Paste and position on bottom left

Select Element 10 - resize by 35%

Paste and position on botton left

Select Element 26 - resize by 25%

Paste and position on bottom left

Select Element 23 - resize by 40%

Image mirror and paste on bottom left

Select Element 18 - resize by 25%

Paste and position on bottom left

Select Element 2 - resize by 25%

Paste and position on bottom

Select Element 24 - resize by 115%

Paste and position on canvas and move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 362 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

SOMETHING WICKED COMES




Supplies needed:

I am using the amazing art from Joan Pelaez for for this tutorial, which you can find here

Scrapkit: I am using a stunning kit from Babycakes Scraps "Joan Pelaez 19-2" which you can get by going here

Mask 362 from Vix which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 30, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 20 and paste in the center of the canvas

Resize by 70%

Select your magic wand tool and click in the center of the Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete,

Paste a close-up tube of choice on the top of paper where desired and delete, select none

Change close-up to Luminance (Legacy)

Apply Bad Dream on default settings of choice

Drop opacity on close-up down to 80%

Apply dropshadow and merge tube down on top of paper layer

Move paper layer below frame

Select Element 26 - resize by 75%

Paste on top of the frame layer where desired

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 22 - resize by 35%

Paste and position on bottom right

Select Element 18 - resize by 50%

Paste and position on bottom right

Select Element 12 - resize by 32%

Paste and position on bottom right

Select Element 9 - resize by 45%

Paste and position on bottom right side

Select Element 19 - resize by 20%

Paste and position on bottom right

Select Element 5 - resize by 40%

Paste and position on bottom

Select Element 10 - resize by 35%

Image Free Rotate Right by 15% and paste on bottom left

Select Element 1 - resize by 25%

Paste and position on bottom left

Select Wordart Element 16 - resize by 65%

Paste and position on top left

Apply Eyecandy Gradient Glow on fat default settings

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 362 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ROCK THIS PARTY OUT





Supplies needed:

I am using the amazing art from Kajenna for this tutorial which you can find here

Scrapkit: I am using a gorgeous kit from Bibi's Collections called "Boom Boom" which you can get by going here

Template 341 from Millie which can be found here

Mask 129 from Aqua which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, VM Extravaganza - Transmission, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 30, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas size by 750 x 650

Select Wordart 9 layer

Select all, float, defloat

Add new raster layer and flood-fill with colors of choice

Select none

Apply Eyecandy Gradient Glow on fat default settings

Delete/Hide original wordart layer

Select Star 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings

Delete/Hide original star layer

Select Square 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original square layer

Select Square 6 layer and repeat gradient steps

Select Square 5 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original square layer

Select Sqauare 4 layer and repeat above steps

Select Circle 3 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/hide original circle layer

Select Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply VM Extravaganza - Transmission with the following settings:

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 77 - resize by 60%

Paste and position in the center below square layers

Select Element 57 - paste and position on left side below tube layer

Select Element 47 - resize by 45%

Paste and position on bottom below tube layer

Select Element 67 - resize by 40%

Paste and position on bottom left

Select Element 7 - resize by 55%

Paste and position on bottom left

Select Element 46 - resize by 30%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 48 and paste on bottom

Select Element 92 - resize by 35%

Paste and position on bottom

Select Element 49 - resize by 45%

Paste and position on bottom right

Select Element 19 - resize by 55%

Paste and position on bottom right

Select Element 26 - resize by 80%

Paste and position on bottom right

Select Element 28 - resize by 35%

Paste and position on bottom left

Select Element 4 - resize by 30%

Paste and position on bottom left

Select Element 2 - resize by 40%

Paste and position on top right

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 129

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, September 28, 2013

MUMMY MAAT





Supplies needed:

I am using the amazing art from Diana Gali for for this tutorial, which you can find here

Scrapkit: I am using a stunning matching kit from Bibi's Collections called "Mummy Maat" which you can get by going here

Mask 159 from Insatiable Dreams which you can find here

Plugins used: Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 28, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 52 and paste in the center of the canvas

Resize by 55%

Select your magic wand tool and click in the center of the Element (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 2

Select invert, delete, select none

Move paper layer below frame

Select Element 51 - resize by 40%

Paste and position on left side

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 76 - resize by 75%

Paste and position on bottom below element 52

You can select your pick tool if desired and adjust the sand to your liking

Select Element 127 - resize by 30%

Paste and position on the bottom in the center

Select Element 122 - resize by 85%

Paste and position on bottom right

Select Element 19 - resize by 35%

Paste and positon on right side

Select Element 120 - resize by 50%

Paste and position on bottom right

Select Element 73 - resize by 50%

Paste and position on bottom right

Select Element 93 - resize by 30%

Paste and position on bottom right

Select Element 3 - resize by 25%

Paste and position on bottom

Select Element 12 - resize by 55%

Paste and position on bottom left

Select Element 31 - resize by 50%

Paste and position on bottom left

Select Element 26 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom

Select Element 86 - resize by 50%

Paste and position on bottom left

Select Element 40 - resize by 25%

Paste and position on bottom left

Select Element 126 - resize by 50%

Paste and position on bottom left

Select Element 110 - resize by 70%

Paste and position on top below tube layer

Select Element 25 - resize by 65%

Paste and position on left side and move below doorway element

Colorize with the following setting if desired:

Select Element 89 - resize by 40%

Paste and position on bottom layer

Paste paper 1 on canvas - resize by 120%

Move to bottom layer

Apply Mask 159 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, September 26, 2013

WITCHY IN THE RIGHT WAYS





Supplies needed:

I am using the amazing art from Wendy Gerber for this tutorial which you can find here

Scrapkit: I am using a wicked matching kit from Black Widow Creationz called "Witchy Poo" which you can get by going here

Template 30 from Kandi Kissez which can be found here

Mask 25 from WitchysHeart which you can get here

Plugins used: Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 26, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas size by 750 x 650

Select Kandi Word Art and move down if desired

Select Stars layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Frame layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Black 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tubes down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original Black 1 layer

Select Red 1 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original red layer

Select Black 2 layer

Apply Effects, Texture Effects, Weave (Gap size 2, Width 4, Opacity 5, Fill gaps checked, change Gap and Weave color to one of choice)

Select Red 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/hide original red layer

Select Black 3 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original black layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 32 - resize by 80%

Paste and position on left side

Image duplicate and mirror

Select Element 12 - resize by 25%

Paste and position on bottom left

Select Element 24 - resize by 25%

Paste and position on bottom left

Select Element 8 - resize by 35%

Paste and position on bottom left

Select Element 3 - resize by 35%

Paste and position on bottom left

Select Element 37 - resize by 20%

Image Free Rotate Left by 15% and paste on bottom right

Select Element 7 - resize by 30%

Paste and position on bottom right

Select Element 40 - resize by 85%

Paste and position on bottom right

Select Element 23 - resize by 40%

Paste and position on bottom right

Select Element 31 - resize by 65%

Paste and position on top below tube layer

Select Element 39 - resize by 40%

Paste and position on top left

Colorize with the following settings if desired

Select Element 22 - resize by 40%

Paste and position on top left

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 25

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

PEEK A BOO





Supplies needed:

I am using the amazing art from Alex Prihodko for this tutorial which you can find here

Scrapkit: I am using an awesome kit from Niqui's Designs called "Peek A Boo" which you can get by going here

Template 27 from Vickie which can be found here

Halloween Bats Mask from Tonya which you can get on the Misfits Blog here

Halloween Mask from Vix which you can find here

Plugins used: Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 26, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust and resize canvas to 750 x 650

Select Circle 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tube down on top of gradient layer

Delete/Hide original circle layer

Select Circle 3 and Circle 3 Frame layer

Move it above Rec 3 layer

Reselect Circle 3

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original circle layer

Select Element 11 - resize by 65%

Paste and position on top of Paper 10 layer

Select Rec 2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/hide original rectangle layer

Select Circle 2 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Effects, Texture Effects, weave (Gap size 2, Width 4, Opacity 5, Fill gaps checked, Change Gap Color to color of choice)

Delete/Hide original circle layer

Select Rec 1 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rec layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 27 - resize by 55%

Paste and position on right side

Select Element 34 - resize by 30%

Paste and position on bottom right

Select Element 14 - resize by 35%

Paste and position on bottom right

Select Element 12 - resize by 25%

Paste and position on bottom right

Select Element 36 - resize by 25%

Paste and position on bottom left

Select Element 15 - resize by 30%

Paste and position on bottom left

Select Element 42 - resize by 40%

Paste and position on top left

Select Element 42 - resize by 30%

Image mirror and paste on top

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Vix Halloween mask

Merge group and move to the bottom

Add new raster layer and again flood-fill with color of choice

Apply Bats Mask and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!


Tuesday, September 24, 2013

DO IT LIKE ROCKSTARS




Supplies needed:

I am using the amazing art from Tamandya for this tutorial which you can find here

Scrapkit: I am using an awesome kit from Scrappin Krazy Designs called "Rockabilly Grrl" which you can get by going here

Rockstar Template from Cakes which can be found here

Dead Sexy Mask from Candy Treats which I think you can still get here

Plugins used: Xero - Fritillary, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 24, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart 2 layer

Select your magic want and select the inner word portion

Add new raster layer and flood-fill with color or gradient of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Select Square 1 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Square 3 layer and repeat above steps

Select Square 2 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/hide original square layer

Select Rectangle 10 layer and repeat above steps

Select Rectangle 4

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 5 layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Square 6 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide orignial square layer

Select Square 7 layer and repeat above steps

Select Circle 8 layer

Select all, float, defloat

Add new raster layer and flood-fill with color or gradient of choice

Select none

Apply Xero-Fritillary with the following settings:

Delete/Hide original circle layer

Select Circle 11 layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 20 - resize by 85%

Paste and position on right side

Select Element 44 - resize by 55%

Paste and position on bottom left below wordart layer

Select Element 30 - resize by 40%

Paste and position on bottom left

Select Element 49 - resize by 30%

Paste and position on bottom left

Select Element 48 - resize by 30%

Paste and position on bottom left

Select Element 66 - resize by 45%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 47 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 41 - resize by 55%

Paste and position on left side

Select Element 33 - resize by 45%

Paste and position on top left

Select Element 3 and paste on canvas - move to bottom layer and reposition

Select Element 78 and paste on top left and move to bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply DeadSexy Mask or mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!



Monday, September 23, 2013

SAME NIGHTMARE DIFFERENT DAY





Supplies needed:

I am using the amazing art from Freya Langford-Sidebottom for this tutorial which you can find here

Scrapkit: I am using a wicked kit from Soxsational Scraps called "F*ck Love" which you can get by going here

Template 198 from BeckyPsCreations which can be found here

Mask 2 from Chichi which you can only get on the Wild Ones Forum here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Eyecandy 4000 - Marble, Xero-Porcelain, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Square Frame Fill layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Marble with the following settings:

Delete/Hide original Frame Fill layer

Select 2 Circle Frame Fill layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tubes down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original circles layer

Select Larger Square Frame Fill layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effect, Texture Effects, Blinds (Width 3, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original frame fill layer

Select 2 Strips layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original strips layer

Select 3 Strips layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/hide original strips layer

Select 2 Rectangles layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/Hide original rectangles layer

Select Rectangle layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide orignial circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 25 - resize by 55%

Paste and position on top right

Select Element 29 - resize by 25%

Image Free Rotate Left by 20% and paste on bottom left

Select Element 22 - resize by 25%

Paste and position on bottom left

Select Element 16 - resize by 25%

Paste and position on bottom left

Select Element 40 - resize by 18%

Paste and position on bottom left

Select Tanktop1 Element - resize by 25%

Image Free Rotate Right by 15% and paste on bottom right

Select Element 50 - resize by 30%

Paste and position on bottom right

Select Element 12 - resize by 20%

Paste and position on bottom right

Select Element 38 - resize by 50%

Paste and position on bottom right

Select Element 41 - resize by 20%

Paste and position on bottom right

Select Element 46 and paste on bottom

Apply Eyecandy Glass on default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 2 or mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

DARK ZENIA





Supplies needed:

I am using the amazing art from Elias Chazoudis for this tutorial which you can find here

Scrapkit: I am using a wicked kit from MistyLynn's Creations called "Morgana" which you can get by going here

Template 334 from Millie which can be found here

Mask 111 from Designs by Vaybs which you can get it here

Plugins used: Eyecandy 4000 - Glass, Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 23, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Star 14 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on fat default settings

Delete/Hide original star layer

Select Star 13 layer and repeat above steps

Select Square 10 layer

Select all, float, defloatAdd new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tube down on top of gradient layer

Delete/Hide original square layer

Select Square 9 layer and repeat above steps

Select Circle 8 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 7 layer and repeat above steps

Select Circle 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circle layer

Select Circle 5 layer and repeat above steps

Select Circle Frame 3 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Apply Eyecandy Glass on fat default settings

Delete/hide original frame layer

Select Circle 2 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Select Element 22 - resize by 40%

Paste and position on bottom right

Select Element 47 - resize by 35%

Paste and position on bottom right

Select Element 59 - resize by 30%

Image mirror and paste on bottom right

Select Element 54 - resize by 30%

Paste and position on bottom right

Select Element 14 - resize by 25%

Paste and position on bottom right

Select Element 50 - resize by 35%

Paste and position on bottom left

Select Element 51 - resize by 30%

Paste and position on bototm left

Select Element 46 - resize by 30%

Paste and position on bottom left

Select Element 29 - resize by 35%

Paste and position on bottom left

Select Element 44 - resize by 50%

Paste and position on left side

Apply Mask 111

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, September 22, 2013

NAUGHTY DEVIL





Supplies needed:

I am using the amazing art from Diana Gali for this tutorial which you can find here

Scrapkit: I am using an awesome matching kit from Disturbed Scraps called "Lady Devil" which you can get by going here

Template 176 from Pooker which can be found here

Mask 70 from Yez Doodles which you can get it here

Plugins used: Eyecandy 4000 - Marble, Xero-Porcelain, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 22, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Black Rectangle layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original rectangle layer

Select White Strips layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none
Apply Eyecandy Marble with the following settings:

Apply Bevel with the following settings:


Select Pink Square1 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original square layer

Select White Circles layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tubes down on top of gradient layer

Delete/Hide original circles layer

Select Lt. Pink Circles layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Delete/Hide original circles layer

Select White Square layer

Select all, float, defloat

Paste paper 5

Select invert, delete, select none

Delete/Hide original square layer

Select Grey Rectangle layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/hide original rectangle layer

Select Pink Rectangle layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 46 - resize by 35%

Paste and position on bottom right

Select Element 4 - resize by 45%

Paste and position on bottom right

Select Element 48 - resize by 30%

Paste and position on bottom right

Select Element 62 - resize by 40%

Paste and position on bottom left

Select Element 63 - resize by 25%

Paste and position on bottom left

Select Element 77 - resize by 25%

Paste and position on bottom left

Select Element 96 - resize by 30%

Paste and position on bottom left

Select Element 5 - resize by 15%

Paste and position on bottom left

Select Element 82 - resize by 70%

Paste and position on bottom

Select Element 19 - resize by 55%

Paste and position on top left

Colorize if desired with the following settings:

Select Element 11 - resize by 80%

Paste and position on top left above moon

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 70

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Thursday, September 19, 2013

DARKNESS WAITS





Supplies needed:

I am using the amazing art from Gaetano DiFalco for for this tutorial, which you can find here

Scrapkit: I am using a beautiful matching bundle kit from Babycakes Scraps for DiFalco's Package 18 which you can get by going here

Mask 249 from Weescotslass which you can find here

Plugins used: Penta - Color dot, Eyecandy 4000 - Gradient Glow, Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 55 and paste in the center of the canvas

Move Element up about an inch from the top

Select your magic wand tool and select the middle portions of the windows (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Paste Element 17 on top of window frame - resize by 110%

Select invert, delete, select none

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 48 - resize by 40%

Paste and position on bottom right

Select Element 50 - resize by 50%

Paste and position on bottom right

Select Element 45 - resize by 40%

Paste and position on bottom right

Select Element 56 - resize by 30%

Paste and position on bottom right

Select Element 53 - resize by 50%

Paste and position on bottom left

Select Element 23 - resize by 50%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 54 - resize by 40%

Paste and position on bottom left

Select Element 31 - resize by 50%

Paste and position on bottom left

Select Element 57 - resize by 75%

Paste and position on bottom

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 249 and merge group

Apply Penta Color dot with the following settings:

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

BOO-TIFUL




Supplies needed:

I am using the amazing art from Misticheskaya for this tutorial which you can find here

Scrapkit: I am using an awesome kit from Horseplay's Pasture Designs called "Halloween Magic" which you can get by going here

Halloween Template 1 from Dee which can be found here

Halloween Mask 4 from Uchy which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Glass, Xero-Porcelain, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 19, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas size to 750 x 600

Select Boo-tiful Wordart layer

Apply Eyecandy Glass on default settings

Select Stars layer and repeat above step

Select Purple Strips layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original strips layer

Select Center Green Circle layer

Select all, float, defloat

Paste paper 16

Select invert, delete, select none

Delete/Hide original circle layer

Select Orange Strip layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide orignal strip layer

Select Left Blue Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at setting of choice

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original circle layer

Select Right Blue Circle and repeat above steps

Select Right Orange Square layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/hide original square layer

Select Left Orange Rectangle layer and repeat above steps

Select Blue Strip layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original strip layer

Select Green Strip layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Green Square layer and repeat above steps

Select Purple 1/2 Circle layer

Select all, float, defloat

Paste paper 13

Select invert, delete, select none

Delete/Hide original 1/2 circle layer

Select White 1/2 Circle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 70%, Monochrome checked)

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 26 - resize by 65%

Paste and position on left side

Select Element 74 - resize by 55%

Image mirror and paste on top left

Select Element 60 - resize by 50%

Paste and position on bottom left

Select Element 80 - resize by 35%

Paste and position on bottom left

Select Element 47 - resize by 55%

Paste and position on top right

Select Element 38 and paste on top right

Select Element 37 - resize by 55%

Paste and position on top right

Select Element 29 - resize by 45%

Paste and position on bottom right

Select Element 71 - resize by 60%

Paste and position on bottom right

Select Element 45 - resize by 35%

Paste and position on bottom right

Select Element 12 - resize by 75%

Paste and position on right side

Select Element 34 - resize by 25%

Paste and position on bottom

Select Element 35 - resize by 18%

Paste and position on bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 4

Merge group and move to the bottom

Apply Penta - Color dot with the following settings:

Drop opacity down to 70%

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, September 17, 2013

HARVEST BLESSINGS





Supplies needed:

I am using the amazing art from Alex Prihodko for for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Redefined Designs called Fall Blessings which you can get by going here

Fall Mask 8 from Jenny which you can find on the Misfits Blog here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 17, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 3 and paste in the center of the canvas

Resize by 85%

Select your magic wand tool and click in the center of each of the squares in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Paste close-up tube(s) on top of paper layer where desired and delete

Select none

Change close-ups to Overlay

Apply Bad Dream on default settings of choice

Apply dropshadow and merge tubes down on top of paper layer

Move paper layer below frame

Select HarvestSign Element - resize by 50%

Paste and position on top of frame element

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Tree Element - resize by 65%

Paste and position on top left

Select Scarecrow2 Element - resize by 23%

Paste and position on left side

Select LightPole Element - resize by 30%

Paste and position on right side

Select Plant Element - resize by 55%

Paste and position on bottom right

Select RottingTree Element - resize by 55%

Image mirror and paste on bottom of frame

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Pumkin2 Element - resize by 25%

Image mirror and paste on bottom left

Select Squirrel Element - resize by 30%

Paste and position on bottom left

Select Wagon Wheel Element - resize by 30%

Paste and position on bottom left

Select Owl Element - resize by 20%

Paste and position where desired

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 8 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

ANGEL OF MINE





Supplies needed:

I am using the amazing art from Wendy Gerber for for this tutorial, which you can find here

Scrapkit: I am using a beautiful matching kit from Black Widow Creationz called "Angel of Mine" which you can get by going here

Mask 52 from Moonbeams and Spiderwebs which you can find here

Plugins used: Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 17, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 9 and paste in the center of the canvas

Resize by 65%

Image Free Rotate Right by 75%

Select your magic wand tool and click in the center of each square in the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 3

Select invert, delete

Paste close-up tube on top of paper layer where desired and delete

Select none

Change close-up to Luminance (Legacy)

Apply Bad Dream on default settings of choice

Drop opacity on close-up down to 75%

Apply dropshadow and merge tube down on top of paper layer

Move paper layer below frame

Select Element 3 - resize by 90%

Image Free Rotate Left by 15% and reposition on top of frame layer

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 40%

Paste and position on bottom left

Select Element 21 - resize by 45%

Paste and position on bottom left

Select Element 11 - resize by 20%

Paste and position on bottom left

Select Element 30 - resize by 30%

Paste and position on bottom left

Select Element 1 - resize by 35%

Paste and position on bottom left

Select Element 40 - resize by 40%

Paste and position on top left

Select Element 8 - resize by 20%

Paste and position on left side

Paste paper 10 onto canvas

Move to bottom layer

Apply Mask 52 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Monday, September 16, 2013

WE'RE ALL MAD





Supplies needed:

I am using the amazing art from Gaetano DiFalco for for this tutorial, which you can find here

Scrapkit: I am using an awesome matching kit from Foxy's Designz which you can get here

Mask 362 from Vix which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 16, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame 1 and paste in the center of the canvas

Resize by 65%

Select your magic wand tool and click in the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 0, Repeat 2)

Paste close-up tube on top of gradient layer where desired

Select invert, delete, select none

Change close-up to Luminance (Legacy)

Apply Bad Dream on default settings of choice

Drop opacity on close-up down to 70%

Apply dropshadow

Add new raster layer and flood-fill with color or gradient of choice

Apply Mask 362 and merge group

Move layer below close-up tube and merge tube, mask and gradient layer together

Move layer below frame and apply Effect, Texture Effects, Blinds (Width 2, Opacity 15, Horizontal and Light from left/top checked)

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 16 - resize by 50%

Paste and position on right side

Select Element 7 - resize by 30%

Paste and position on bottom right

Select Element 4 - resize by 25%

Paste and position on bottom right

Select Element 3 - resize by 30%

Paste and position on bottom right

Select Element 13 - resize by 35%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 14 - resize by 35%

Image Free Rotate Right by 15% and paste on bottom left below element 13

Select Element 6 - resize by 30%

Paste and position on bottom left

Select Element 8 - resize by 25%

Paste and position on bottom left

Select Element 5 - resize by 25%

Paste and position on bottom left

Select Element 1 - resize by 35%

Paste and position on bottom left

Select Wordart1 - resize by 70%

Paste and position on top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Sunday, September 15, 2013

SEA LOVER





Supplies needed:

I am using the amazing art from Diana Gali for this tutorial which you can find here

Scrapkit: I am using an awesome kit from Disturbed Scraps called "Mermaid and Crab" which you can get by going here

Template 258 from Millie which can be found here

Mask 21 from Gina Gems which you can get it here

Plugins used: Eyecandy 4000 - Gradient Glow, Alien Skin - Eye Candy 5 Impact Glass, Xero-Porcelain, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 15, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas size to 750 x 600

Select Circle 6 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Apply Eyecandy Glass on the following Clear with Reflections default settings:

Delete/Hide original circle layer

Select Circle 5 layer and repeat above steps

Select Wordart 4 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice

Select none

Apply Eyecandy Glass on same default settings

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Delete/Hide original wordart layer

Select Circle 3 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/hide original circle layer

Select Rectangle 2 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 1 layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select House Element - resize by 55%

Paste and position on right side

Select Element 20 - resize by 85%

Paste and position in the center of circle frames where desired

Select Element 97 - resize by 80%

Paste and position on top of element 20 where desired

Select Element 19 - resize by 65%

Paste and position on bottom right

Image duplicate and mirror

Select Element 54 - resize by 45%

Paste and position on top of left circle

Image duplicate and mirror

Select Element 106 - resize by 45%

Image mirror and paste on bottom right

Select Element 74 - resize by 20%

Paste and position on bottom right

Select Element 105 - resize by 30%

Paste and position on bottom right

Select Element 64 - resize by 20%

Paste and position on bottom right

Select Element 22 - resize by 45%

Image mirror and paste on bottom left

Select Element 80 - resize by 40%

Paste and position on bottom left

Select Element 58 - resize by 25%

Paste and position on bottom left

Select Element 55 - resize by 20%

Paste and position on bottom left

Select Element 31 - resize by 20%

Paste and position on bottom

Select Element 76 - resize by 30%

Paste and position on bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 21

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, September 14, 2013

SUMMERTIME SADNESS




Supplies needed:

I am using the amazing art from Zindy S.D. Nielsen for for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Gothic Inspirations called "Summertime Sadnesss" which you can get by going here

Mask 4 from ButterflyFlutterby which you can find here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 14, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Broken Gates Element and paste in the center of the canvas

Resize by 80%

Select MoonWCloud Element - resize by 35%

Paste and position on top right below gate element

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Curtain1 Element - resize by 50%

Paste and position on right side

Select GraveStone1 Element - resize by 50%

Paste and position on right side

Select Leaves3 Element - resize by 40%

Image mirror and paste on right side below cross element

Select Lawn Element - resize by 80%

Paste and position on bottom below gate element

Select Bottle Element - resize by 25%

Paste and position on bottom right

Select Flower3 Element - resize by 20%

Paste and position on bottom right

Select Tree Element - resize by 40%

Paste and position on left side

Select Books Element - resize by 30%

Paste and position on bottom left

Select Butterflies Element - resize by 25%

Paste and position on left side

Select Strawberry2 Element - resize by 15%

Paste and position on bottom left

Select StitchedHeart Element - resize by 10%

Paste and position on bottom left

Select Rose Element - resize by 20%

Paste and position on bottom left

Select Wordart2 Element - resize by 50%

Paste and position on top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 4)

Select Mask Element - resize by 80%

Paste on canvas and move to bottom layer

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 4 and merge group

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!
Wednesday, September 11, 2013

CAT BABE





Supplies needed:

I am using the amazing art from Danny Lee for for this tutorial, which you can find here

Scrapkit: I am using a beautiful kit from Bibi's Collection called Cat Babe which you can get by going here

Mask 37 from Babes Designs. Unfortunately, Babes has closed her blog so I am providing it in my files here

Plugins used: Mura Meister - Copies, Penta - Color dot, Xero- Bad Dream, Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 11, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 43 and paste in the center of the canvas

Resize by 30%

Apply Mura Meister Copies on Encircle with the following settings:

Select your magic wand tool and click in the center of the flower circle frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 3

Paste paper 12

Select invert, delete

Select Element 36 - resize by 90% and paste on top of paper layer

Apply Eyecandy Gradient Glow on fat default settings

Select Element 13 - resize by 75%

Paste and position on bottom

Paste close-up tube on top of paper layer where desired and delete

Select none

Paste tube of choice where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 82 - resize by 75%

Paste and position on right side below tube layer

Select Element 55 - resize by 70%

Paste and position on bottom below frame layer

Select Element 10 - resize by 25%

Image mirror and paste on bottom right

Select Element 27 - resize by 20%

Paste and position on bottom right

Select Element 69 - resize by 20%

Paste and position on bottom right

Select Element 23 - resize by 50%

Paste and position on bottom right

Select Element 67 - resize by 20%

Paste and position on bottom left

Select Element 49 - resize by 25%

Image mirror and paste on bottom left

Select Element 41 - resize by 75%

Paste and position on bottom left

Select Element 65 - resize by 25%

Paste and position on bottom left

Select Element 30 - resize by 75%

Paste and position on bottom

Add new raster layer and flood-fill with color or gradient of choice

Move to bottom layer

Apply Mask 37 and merge group

Apply Penta Color dot with the following settings:

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

WITCH IN TRAINING





Supplies needed:

I am using the amazing art from Zlata for this tutorial which you can find here

Scrapkit: I am using an awesome kit from Thrifty Scraps by Gina called "Boo Berry" which you can get by going here

Template 40 from Millie which can be found here

Mask 302 from WSL which you can get it here

Plugins used: Penta - Color dot, Eyecandy 4000 - Graident Glow, Eyecandy 4000 - Glass, Xero-Porcelain, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 11, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas size to 750 x 600

Select Wordarts layers 9, 10 and 11 and apply Eyecandy Gradient Glow on fat defaults settings (glow width 3)

Select Square Frame 8

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Eyecandy Glass on default settings

Delete/Hide original frame layer

Select Square Frame 6 layer and repeat above steps

Select Square 7 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeups to Hard Light

Apply Xero Bad Dream at setting of choice

Drop opacity down to 65%

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original square 7 layer

Select Square 5 layer and repeat above steps

Select Rectangle 4 layer

Select all, float, defloat

Paste paper 2

Select invert, delete, select none

Delete/hide original rectangle layer

Select Rectangle 3 layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Textures with the following setting set on the snake pattern:

Delete/Hide original circle layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select House Element - resize by 55%

Paste and position on right side

Select Tree1 Element - resize by 60%

Image mirror and paste on left side below frames layers

Select Cauldron Element - resize by 40%

Paste and position on bottom right

Select Cat 2 Element - resize by 35%

Paste and position on bottom right

Select Ribbon 3 Element - resize by 90%

Paste and position on bottom below tube layer

Select Moon Element - resize by 50%

Image mirror and paste on top left below wordart layer

Select Owl Element - resize by 25%

Paste and position on top left

Select Monster Element - resize by 25%

Paste and position on bottom left

Select Pumpkin 1 Element - resize by 30%

Paste and position on bottom left

Select Bat 2 Element - resize by 50%

Paste and position on top right

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 302

Merge group and move to the bottom

Apply Penta - Color dot with the following settings:

Drop opacity down to 70%

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Tuesday, September 10, 2013

ROCK REBEL





Supplies needed:

I am using the amazing art from Celinart Pinup for this tutorial which you can find here

Scrapkit: I am using an awesome kit from MistyLynns Creations called "Rock Rebel" which you can get by going here

Template 324 from Millie which can be found here

Sparkle Mask from Witchys Heart which you can find on the Misfits Blog here

Plugins used: Xero-Radiance, Xero - Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on September 10, 2013. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Adjust canvas size to 750 x 600

Select Square Frame 8

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Square Frame 9 and repeat

Select Square 6 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient or color of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Select none

Change closeups to Hard Light

Apply Xero Bad Dream at setting of choice

Drop opacity down to 75%

Apply dropshadow and merge tube down on top of gradient layer

Effect, Texture Effects, Blinds (Width 2, Opactity 20, Horizontal and Light from left/top checked)

Delete/Hide original square 6 layer

Select Square 5 layer and repeat above steps

Select Circle 4 layer

Select all, float, defloat

Paste paper 4

Select invert, delete, select none

Delete/hide original circle layer

Select Square 3 layer

Select all, float, defloat

Paste paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Square 2 layer and repeat above steps

Select Oval 1 layer

Select all, float, defloat

Paste paper 12

Select invert, delete, select none

Delete/Hide original oval layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 36 - resize by 80%

Paste and position on bottom

Select Element 25 - resize by 35%

Paste and position on bottom left

Select Element 62 - resize by 30%

Paste and position on bottom left

Select Element 40 - resize by 30%

Paste and position on bottom left

Select Element 37 - resize by 25%

Image Free Rotate Left by 15% and paste on bottom left

Select Element 23 - resize by 30%

Paste and position on bottom left

Select Element 1 - resize by 25%

Paste and position on bottom left

Select Element 64 - resize by 45%

Paste and position on bottom right

Select Element 4 - resize by 40%

Paste and position on bottom right

Select Element 18 - resize by 40%

Paste and position on bottom right

Select Element 12 - resize by 20%

Paste and position on bottom right

Select Element 54 - resize by 25%

Paste and position on bottom right

Select Element 31 - resize by 90%

Paste and position in the center below tube layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 1

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif