Lee's Creationz: November 2012

Supplies needed:

I am using the amazing art from Jose Cano for this tutorial, which you can find here

Scrapkit: I am using a kit from Irish Bitch Designs called "Santa Baby" which you can get by going here

Template 117 from Millie which can be found here

Mask 160 from Insatiable Dreams here

Plugins used: Penta - Jeans, Eyecandy 4000- Glass, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 24, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart 8 layer

Add new raster layer and flood-fill with color of choice

Select wordart layer again

Select all, float, defloat

Reselect layer you just filled with a color

Select invert, delete, select none

Apply Eyecandy Glass at default settings

Delete/Hide original wordart layer

Select Wordart 7 layer and repeat above steps

Select Rectangles 6 layer

Select all, float, defloat

Add new raster layer and flood-fill rectangles with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of gradient

Hide/Delete original rectangles layer

Select Rectangles 5 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Apply Penta - Jeans with the following settings:

Delete/Hide original rectangles layer

Select Squares layer 4

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Effects, Texture Effects, Weave (Gap size 2, Width 4, Opacity 5, fill gaps checked)

Delete/Hide original squares layer

Select Circle 3 layer

Select all, float, defloat

Paste IBD_SB_paper8

Select invert, delete, select none

Delete/Hide original circle layer

Select Squares layer 2

Select all, float, defloat

Paste IBD_SB_paper5

Select invert, delete, select none

Delete/Hide original squares layer

Select Canecluster element - resize by 23%

Paste and position on top right side of paper 5 layer

Select Squares 1 layer

Select all, float, defloat

Paste IBD_SB_paper6

Select invert, delete, select none

Delete/Hide original squares layer

Select IBD_SB_Icicles element - resize by 58%

Paste and position on top of squares layer

Select IBD_SB_GingerHouse element - resize by 35%

Select IBD_SB_Frosty element - resize by 35%

Paste and position on top of gingerbread element

Paste and position on the bottom right side

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 160

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps and the City | 0 comments

NIGHT LIFE

12:39 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Uchakina for this tutorial, which you can find here

Scrapkit: I am using a kit from Gemini Creationz called "Night Life" which you can get by going here

VestaRhonda Collab 5 which can be found here

Mask 25 by WitchysHeart here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 24, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Left Circle

Select all, float, defloat

Add new raster layer and flood-fill circles with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeups to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 75%

Apply dropshadow and merge down on top of gradient

Apply Eyecandy - Gradient Glow on fat default settings (Width 3)

Hide/Delete original circle layer

Select Right Circle layer

Repeat above steps/settings

Select Right bar layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original bar layer

Select Left bar layer and repeat steps

Select Center Oval layer

Select all, float, defloat

Paste paper 6

Select invert, delete, select none

Delete/Hide original oval layer

Select Bottom Square layer

Select all, float, defloat

Paste paper 9

Select invert, delete, select none

Delete/Hide original square layer

Select Top Square layer and repeat above steps

Select Left Arrow layer

Select all, float, defloat

Paste paper 3

Select invert, delete, select none

Delete/Hide original arrow layer

Select Right Arrow layer and repeat above steps

Select Left Circle layer

Select all, float, defloat

Paste paper 10

Select invert, delete, select none

Delete/Hide original circle layer

Select Right Circle layer and repeat steps

Select Frame 1 element - resize by 70%

Paste and position on top of right circle layer

Image, duplicate, mirror and flip

Select Fandangle element - resize by 60%

Paste and position on top of right circle layer

Select path element - resize by 75%

Paste and position on the bottom

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 25

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:The PSP Project | 0 comments

Wednesday, November 21, 2012

FOREVER FALL

1:22 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Samuel Silva for this tutorial, which you can find here

Scrapkit: I am using a kit from Gothic Inspirations called "Forever Fall" which you can get by going here

Fall Mask 1 by Melissa here

Creative Mask 54 by Tee here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Porcelain, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 21, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 700 x 650 blank canvas (we can resize it later)

Select Frame4 - resize by 85%

Paste in the center of your canvas

Select your magic wand and click in the center of your frame (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete

Copy and paste tube of choice on top of paper layer

Delete and select none

Apply Xero Porcelain at default settings

Apply dropshadow and merge tube down on top of paper layer

Move paper/tube layer below frame element

Apply dropshadow to frame and merge together with paper/tube layer

Select GoldenGrapes element - resize by 52%

Paste and position on top left corner on your frame

Select Pumpkins element - resize by 28%

Paste and position on bottom right side on your frame

Select WordArt1 element - resize by 60%

Paste and position on the bottom center

Apply Eyecandy - Gradient Glow at default settings (Width 3)

Select Candle element - resize by 40%

Paste and position on bottom left side of frame

Select Compass element - resize by 25%

Paste and position behind candle element

Image, Free rotate left 15%

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 54

Merge group and move to the bottom

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Fall Mask 1

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:indie-Zine | 0 comments

Saturday, November 17, 2012

NAUGHTY XMAS

6:03 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Leonardo Preda for this tutorial, which you can find here

Scrapkit: I am using a kit from Eclipse Creations called "Lovely Christmas" which you can get by going here

Holiday Template from Biene which can be found on the Misfits Blog here

Winter Misfit Mask 2011 from Melissa here

Plugins used: Eyecandy 4000 - Glass, Eyecandy 4000 - Gradient Glow, Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 17, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layer

Apply Eyecandy Gradient Glow on fat default settings (width 3)

Select wordart back and delete

Select Star Left layer

Select all, float, and defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 75%, Monochrome checked)

Delete/Hide original star layer

Select Star Right layer and repeat above steps

Select Frame rectangle layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choicee

Apply Eyecandy Glass at default settings

Delete/Hide original frame layer

Select Rectangle layer

Select all, float, defloat

Paste paper EC_LC_P7

Select invert, delete, select none

Delete/Hide original rectangle layer

Select EC_LC_Scroll element - resize by 65%

Paste and position on right side of rectangle layer

Select Square right layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of gradient

Hide/Delete original square layer

Select Square left layer and repeat above steps

Select topwording layer

Apply Eyecandy Gradient glow with the same fat settings

Select Circle layer

Select all, float, defloat

Paste paper EC_LC_P4

Select invert, delete, select none

Delete/Hide original circle layer

Select EC_LC_ScatteredRings1 - resize by 90%

Paste on top of circle layer

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Misfit Mask

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Eclipse Creations,indie-Zine | 0 comments

Thursday, November 15, 2012

SPECIAL CHRISTMAS

4:08 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using an Exclusive artwork from Very Many for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Niqui's Designs called "A Very Special Christmas" which you can get by going here

Snowflake Template from Tina here

Designs by Vaybs Xmas Mask 5 here

Plugins used: Xero Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 15, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Snowflake layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select Copy of Snowflake and repeat noise

Select Square layer

Select all, float, defloat

Paste nq-paper 8

Select invert, delete, select none

Delete/Hide original square layer

Select Rec 2 layer

Select all, float, defloat

Paste nq-paper 7

Select invert, delete, select none

Delete/Hide original rect layer

Select Rec1 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeups to Luminence (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 65%

Apply dropshadow and merge tubes down on top of gradient

Hide/Delete original rec1 layer

Select RecRight layer

Select all, float, defloat

Paste nq-paper 6

Select invert, delete, select none

Delete/Hide original recright layer

Select Recleft layer and repeat above steps

Select nq-element 3 - resize by 35%

Paste and position on top of recleft layer

Select Rectangle layer

Select all, float, defloat

Paste nq-paper 2

Select invert, delete, select none

Delete/Hide original rectangle layer

Select CircleRight layer

Select all, float, defloat

Paste nq-paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select CircleLeft layer and repeat above steps

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select nq-element 24 - resize by 45%

Paste and position on right side under tube layer

Select nq-element 1 - resize by 32%

Paste and position on right side under tube layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 5

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Niqui Designs | 0 comments

Sunday, November 11, 2012

BLACK FRIDAY

6:03 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Zlata for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Annaica called "Black Friday" which you can get by going here

Template 403 from Divine Intentionz here

Mask 9 from Babes Designz or mask of choice. Unfortunately, she has removed her blog.

Plugins used: Eyecandy 4000 - Glass, Xero Porcelain, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 11, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Frame layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Apply Eyecandy - Glass at default settings

Delete/Hide original frame layer

Select Frame Back layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminence (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 80%

Apply dropshadow and merge down on top of gradient

Hide/Delete original frame back layer

Select Circle 2 layer

Select all, float, defloat

Paste AP_Black_Paper1

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 3 layer

Repeat above steps

Select Thin Rectangle 3 layer

Select all, float, defloat

Paste AP_Black_Paper3

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Dotted Line 1 and Dotted Line 2 delete

Select Thin Rectangle 2 layer

Select all, float, defloat

Paste AP_Black_Paper6

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Thin Rectangle 1 layer

Select all, float, defloat

Paste AP_Black_Paper12

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Circle 1 layer

Select all, float, defloat

Paste AP_Black_Paper13

Select invert, delete, select none

Delete/Hide original circle layer

Select Star layers and delete

Select Rectangle2 layer

Select all, float, defloat

Paste AP_Black_Paper14

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rectangle 1 layer

Repeat above steps

Select AP Element 59 - resize by 45%

Paste and position on top of Rectangle2 layer

Select Square layer

Select all, float, defloat

Paste AP_Black_Paper4

Select invert, delete, select none

Delete/Hide original square layer

Select Copy of Circle 3

Select all, float, defloat

Paste AP_Black_Paper15

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select AP wordart element 69 - resize by 35%

Paste and position on top left

Adjust, Sharpness, Sharpen

Apply Eyecandy Gradient Glow on fat default settings

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 9 or mask of choice

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Annaica | 0 comments

Saturday, November 10, 2012

UNDERWORLD

9:23 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from KiwiFireStorm for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Mellye Creations called "Mr. Helsing" which you can get by going here

Template 434 from Divine Intentionz here

Mask 191 from Insatiable Dreams here

Plugins used: Xero-Fritillary, Xero Porcelain, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 10, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Wordart layer

Select your Change to Target tool (shown below) and color/replace the pink to color of choice

Select your magic wand tool and click on the letters that you just changed the color on (hold shift key to select more than one letter)

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 60%, Monochrome checked)

Select Heart1 and Heart2 layers and delete

Select Rounded Edge Rect Centre layer

Select all, float, defloat

Paste MC_paper6 - resize by 25%

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Glitter Circle 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Burn

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 55%

Apply dropshadow and merge down on top of gradient

Hide/Delete original Circle layer

Select Glitter Circle 1 layer

Repeat above steps/settings

Select Pink Circle 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 60%, Monochrome checked)

Delete/Hide original circle layer

Delete Pink Circke 4 layer

Repeat above steps

Select Rounded Edge Rectangle4 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Apply Xero-Fritillary with the following settings:

Delete/Hide original rectangle layer

Select Rounded Edge Rectangle3 layer and delete

Select Rounded Edge Rectangle2 layer

Select all float, defloat

Add new raster layer and flood-fill with color of choice

Appy Xero-Fritillary with same above settings

Delete/Hide original rectangle layer

Select Rectangle layer

Select all, float, defloat

Paste MC_paper9 - resize by 25%

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Rounded Edge Rectangle layer

Select all, float, defloat

Paste MC_element 62 - resize by 30%

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select MC_element32 - resize by 20%

Paste and position on right side below tube layer

Select MC_element 25 - resize by 65%

Paste and position on bottom left side under tube layer

Select MC_element 59 - resize by 25%

Paste and position on bottom left side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 191

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:The PSP Project | 0 comments

GLAMOROUS NIGHTLIFE

6:58 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Alex Prihodko for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Amy Marie called "Kelly Lynn" which you can get by going here

Template 430 from Divine Intentionz here

Mask 179 from Insatiable Dreams here

Plugins used: Xero-Porcelain, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 10, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Frame 3 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Select none

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original frame layer

Select Frame Back 3

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeup to Hard Light

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 55%

Apply dropshadow and merge down on top of gradient

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Hide/Delete original frame back layer

Select Frame 1 layer

Select all, float, defloat

Add new raster layer and flood-fill with color of choice

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 55%, Monochrome checked)

Delete/Hide original frame layer

Select Frame 2 layer

Repeat above steps

Select Frame Back 2 layer

Select all, float, defloat

Add new raster layer and flood-fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tube of choice on top of gradient and delete

Change closeup to Luminence (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 80%

Apply dropshadow and merge down on top of gradient

Delete/Hide original frame back layer

Select Frame Back 1 layer

Repeat above steps

Select Rounded Edge Rect 4 layer

Select all, float, defloat

Paste paper pp015

Select invert, delete, select none

Delete/Hide original rounded rectangle layer

Select Rounded Edge Rect 3 layer

Repeat above steps

Select Circle1 layer

Select all, float, defloat

Paste paper pp2

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle2 layer

Repeat above steps

Select DiscoballHuge element - resize by 35%

Paste and position on top of Circle2 layer

Adjust, Sharpness, Sharpen

Select Glitter Circle2 layer and delete

Select Square 2 layer

Select all, float, defloat

Paste Paper pp015

Select invert, delete, select none

Delete/Hide original square layer

Select Square 1 layer

Repeat above steps

Select Rounded Edge Rect2 layer

Select all, float, defloat

Paste paper pp1

Select invert, delete, select none

Delete/Hide original rect2 layer

Select Rounded Edge Rect1 layer

Repeat above steps

Select Rectangle layer

Select all, float, defloat

Paste paper pp013

Select invert, delete, select none

Delete/Hide original rectangle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select Wordart3 - resize by 55%

Paste and position on top right corner

Select Wire 1 element - resize by 80%

Paste and reposition on left side

Move to the bottom layer

Paste and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 187

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Amy Marie | 0 comments

BACK TO BLACK

1:33 PM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Screaming Demons for this tutorial, which you can find here

Scrapkit: I am using an awesome kit from Bibi's Collection called "Back to Black" which you can get by going here

Template 55 Dezigns by Ali which cannot be found because she has retired

Mask 179 from Insatiable Dreams here

Plugins used: Eyecandy 4000 - Gradient Glow, Xero-Porcelain, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 10, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open the template and using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original and delete the copywrite layer.

Select Frame 1 layer

Adjust, Add/Remove Noise, Add Noise (Uniform checked, Noise 100%, Monochrome checked)

Select element 113 - resize by 65%

Paste and position on left side of frame

Select Middle Rectangle Frame layer

Select all, float, and defloat

Paste Paper 13

Select invert, delete, select none

Delete/Hide original rectangle layer

Select Element 89 - resize by 75%

Paste on top of rectangle frame layer

Select Circle 3 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Select element 61 - resize by 70%

Paste and reposition on the bottom of Circle 3 layer

Select Back Frames layer

Select all, float, defloat

Add new raster layer and flood fill with gradient of choice (Linear style, Angle 45, Repeat 2)

Paste close-up tubes of choice on top of gradient and delete

Change closeup to Luminance (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-ups down to about 70%

Apply dropshadow and merge down on top of gradient

Hide/Delete original rectangle frames layer

Select Circle 2 layer

Select all, float, defloat

Paste paper 7

Select invert, delete, select none

Delete/Hide original circle layer

Select Circle 1 layer

Select all, float, defloat

Paste paper 1

Select invert, delete, select none

Delete/Hide original circle layer

Copy and paste tube of choice and position where desired

Apply Xero Porcelain at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 119

Paste and move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 179

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scraps and the City | 0 comments

Friday, November 2, 2012

BE YOURSELF TAG SHOWOFF

10:18 AM | Posted by Lee's Creationz | Edit Post

New Tag Showoff using the amazing artwork of Cliff Thomas only available at Indie-Zine

Labels:indie-Zine | 0 comments

SECRET GARDEN

8:34 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the amazing art from Bonnies Creations for this tutorial, which you can find here

Scrapkit: I am using an beautiful kit from Eclipse Creations called "My Secret Garden" which you can get by going here

Yezmask 070 here

Plugins used: Xero-Radiance, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 2, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select EC_MSG_Window element

Paste in the center of the canvas

Select your magic wand and click in the center of your Window (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper EC_MSG_P4

Select invert, delete, select none

Select EC_MSG_Sign element - resize by 65%

Paste and position on left side of window element

Select EC_MSG_Log element - resize by 75%

Paste and position on the right side of window frame

Select EC_MSG_umbrella element

Paste and position on top of log element

Select EC_MSG_Light2 element - resize by 50%

Paste and position on top of log element

Select EC_MSG_Mushroom3 element

Paste and position on the right side of window frame

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select EC_MSG_Grass

Paste and reposition on the bottom

Move to the bottom layer

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 70

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Bonnies Creations,Eclipse Creations | 0 comments

Thursday, November 1, 2012

AUTUMN WALK

7:03 AM | Posted by Lee's Creationz | Edit Post

Supplies needed:

I am using the an Exclusive artwork from Pics For Design for this tutorial, which you can find here

Scrapkit: I am using a kit from Scrappin Krazy Designs called "Fallin For Autumn" which you can get by going here

Weescotslass Creations Mask 275 here

Plugins used: Xero-Radiance, Xero-Bad Dream, Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 1, 2012. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select frame element 31

Paste in the center of the canvas

Select your magic wand and click in the center of your frame (Add (Shift), RGB Value, Tolerance 10, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper p05

Select invert, delete

Copy and paste tube of choice on top of paper layer

Delete and select none

Change tube to Luminence (Legacy)

Apply Xero Bad Dream at default settings

Drop the opacity on close-up down to about 50%

Apply dropshadow and merge tube down on top of paper layer

Move paper/tube layer below frame element

Apply dropshadow to frame and merge together with paper/tube layer

Apply Effect, Texture Effects, Blinds (Width 2, Opactity 25, Horizontal and Light from left/top checked)

Select Tree Element 40

Paste and postion on left side of frame

Select Element 33 - resize by 70%

Paste and reposition on top left side of frame layer

Select Element 46 - resize by 35%

Paste and postion on top left side of frame layer

Select Butterfly element 51 - resize by 45%

Image, free rotate right 20%

Paste and postion on top right side of frame layer

Select Bench Element 76 - resize by 80%

Paste and move to the bottom left corner

Copy and paste tube of choice and position where desired

Apply Xero Radiance at setting of choice

Apply Lokas 3D Shadow at default settings

Select Element 30 - resize by 55%

Paste and postion on bottom right side

Select New raster layer and flood fill with color or gradient of choice

Move layer to the bottom of the template

Apply Mask 275

Merge group and move to the bottom

Add any additional elements you like.

Add any dropshadows you like

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Labels:Scrappin Krazy Designs | 0 comments

Labels

I CT For

Blog Archive

Facebook

SANTA BABY